- Add also some validation ASSERTs and simplify the code here and there.
- The installation partition is called "InstallPartition", while the
global "CurrentPartition" is the disk region currently selected in
the partition UI list, on which prtitioning operations are effectued.
- Extend CheckActiveSystemPartition() to use an optional alternative
disk or partition in case the actual system partition (present in the
first disk) cannot be used, e.g. because we don't support writes on it.
- Find or set the active system partition only once, when we start the
formatting stage. If the system partition is to be created in some
non-partitioned space, we create it.
- A file-system check is always scheduled for both the system and the
installation partitions.
- If the system partition was already formatted (which usually means
that it already existed on the system), don't ask for formatting it.
CORE-13205
- For each partition to be formatted, the file-system menu list is
re-created, in order to display only the FSes that are compatible
with the selected partition, and allow to give the user the choice
to keep the existing file-system only if the selected partition was
already formatted.
- Check whether the user attempts to delete the partition on which
the installation source is present, only if it is not "new" and is
formatted.
- Check first whether the current partition is the system partition,
before displaying the CONFIRM_DELETE_SYSTEM_PARTITION_PAGE.
- Make some partitioning functions not dependent on the selected "CurrentPartition".
- Add some sanity checks.
- Improve some of the "is-partitioned" checks.
Similarly to FMIFS this structure should be private. Instead file-system
names are passed to the helper functions, allowing to use the names
returned by the FS drivers. The names are then internally mapped to the
corresponding FS providers.
In particular this allows to handle the "RAW" file-system and to assign
the 'Unformatted' flag to partitions having this FS.
Finally this helps us refining the checks performed to see whether the
current "active" system partition uses a supported file-system.
This stub is responsible for providing the UUID seed to the kernel.
For now, it generates a purely random seed - MAC address support
is to be added.
Because it's purely random seed and local the machine (not tied
to the MAC address) it's made so that ExUuidCreate keeps returning
RPC_NT_UUID_LOCAL_ONLY. It won't fix failing test for now.
Nota: this service shouldn't exist as it. It should be implemented
though rpcss DLL for both rpcss service (network service) and
dcomlaunch service (local system service).
Because rpcss is EXE based and wine-synced for now, I prefered
stubbing a new service. This will have to be changed at some point.
- Implement the save/load handler for this feature
- Check the "Use Click Sound" item state accordingly depending if it's enabled or disabled
- Use PlaySoundW() to play the wave sound file from resource
- Add the WAV sound click file. The work is made thanks to Midori Mizuno
Prevent nslookup.exe from crashing when executed in a ROS VM with no network
interfaces. This is due to a NULL pointer dereference occurring if
`GetNetworkParams` in `main` fails with an error other than
`ERROR_BUFFER_OVERFLOW`. In this case, `pNetInfo` remains initialized to
NULL, causing `strncpy` to crash.
- Within the function's body code, check the status values returned by the called functions.
- Change the BuildInstallPaths's function type to NTSTATUS instead of VOID (and check the status of InitDestinationPaths() as well.
- Add the respective standard keyboard resource.
- Implement the standard/enhanced keyboard dialog switcher.
- Implement save/load handler.
- Move the warning box conditinal check (bShowWarning) to wWinMain application entry point (this will prevent the modal welcome box from displaying each time the user switches into another dialog).
CORE-14428
[CMDUTILS/AT] Fix missing translation strings in certain files.
[NOTEPAD] Fix SUBLANG code to brazillian.
[RAPPS] Fix missing translation strings in certain files.
[FDEBUG] Fix translation string ID.
[CPL/INPUT] Fix missing translation strings in certain files.
[ACPPAGE] Fix incorrect resource IDs.
[NETSHELL] Fix incorrect resource IDs.
[DEVMGR] Fix missing translation strings in certain files.
[LSASRV] Fix missing translation strings in certain files.
[RASDLG] Fix missing translation strings in certain files.
[SHELL32] Fix missing translation strings and incorrect resource IDs.
[TAPIUI] Fix missing translation strings in certain files.
[WINFILE] Fix incorrect resource IDs.
[NTVDM] Fix missing translation strings in certain files.
[USERSRV] Fix missing translation strings in certain files.
[BROWSEUI] One more missing string.
[FLTMC] Fix missing translation strings in certain files.
Detected using the TransDiffer tool (early alpha).
This doesn't include everything anymore, but I wanted to get the PR out of the way.
* [WIN32K] Fix handle calculation in DbgGdiHTIntegrityCheck
* [NOTEPAD] Fix MSVC warnings
* [PSDK] Simplify *PROC definitions in windef.h
* [VIDEOPRT] Don't try to use NtVdmControl on x64
* [FREELDR] Fix some macros
* [CRT] Make qsort 64 bit compatible
* [NTOS] Use #ifndef _WIN64 instead of #ifdef _M_IX86 around C_ASSERTs
* [FAST486] Fix 64 bit warnings and change DWORD to ULONG, so it can be used in kernel mode
* [APPHELP_APITEST] Fix 64 bit issue
This fixes services not being found.
With that commit and the previous one, I_QueryTagInformation is now fully
functionnal and properly returns service name for a specific tag
By default, we still fallback to FAT if nothing asked, or if there
is an invalid input.
0 is FAT, 1 is BtrFS. This can be grown as soon as we add more IFS.
[REG][REACTOS][EXPLORER][APPWIZ][CONSOLE][INETCPL][INPUT]
[INTL][OPENGLCFG][TIMEDATE][DEVCPUX][COMCTL32][COMDLG32]
[MSGINA][NETCFGX][NETID][SETUPAPI][SHELL32][SYSSETUP]
Update Simplified and Traditional Chinese translations.
@Translators: Please start translating messages from netmsgmsg.mc and errorcodes.mc (located in sdk\include\reactos\mc). They will be used instead of local strings.
* [BROWSEUI] Update Traditional Chinese translation.
* [BROWSEUI] Update Simplified Chinese translation.
* [SHELL32] Update Traditional Chinese translation.
* [REGEDIT] Update Traditional Chinese translation.
* [BROWSEUI] Update Traditional Chinese translation.
- The converter is code7bit I made. code7bit: https://github.com/katahiromz/code7bit
- This converter converts non-clean characters in string literals.
- However I couldn't erase a ton of codepage C4819 warnings.
- CORE-15447
You can edit an European source file as follows:
- Right click the file in the Solution Explorer.
- Select "Open With...".
- Choose "C++ Source Code Editor (with encoding)".
- Choose "Central European (Windows) - Codepage 1260".
Using locked operations (insertion & removal) on the list of queued
devices installations is necessary, because these operations are done
concurrently by two different threads: PnpEventThread() and
DeviceInstallThread().
Addendum to commit b2aeafca (r24365).
- Add checks for GPT disks and either fail or ignore the disk,
depending on the operation being executed.
[USETUP][REACTOS] Display the disk style more accurately.
CORE-7749
- Correctly insert discovered partitions in sorted order of StartSector,
and verify that they do not overlap (-> check for broken partitioning).
May help for CORE-10898.
- Use the correct reported partition numbers that may be modified after
partitioning changes, and that need to be used when opening
\Device\Harddisk'M'\Partition'N' files. This is achieving by
retrieving the returned value of the IOCTL_DISK_SET_DRIVE_LAYOUT call.
Distinguish them from the "on-disk" partition numbers that are the ones
that enumerate the partition in partition-table order (and is the order
known by e.g. the BIOS), and that should be used to construct the
destination ARC path.
May help for CORE-4870, CORE-13205.
- Simplify a lot of duplicated code by using helper functions.
In the struct passed to SHCreateFromDesktop the fourth field is the parameter that later on will be passed to ShowWindow. Initialize it properly so that when we run filrbrowser.exe in win2k3 the main window won't be hidden.
-Rename StartMenuBtnCtxMenuCreator to CStartMenuBtnCtxMenu_CreateInstance.
-Rename CreateStartMenuSite to CStartMenuSite_CreateInstance.
-Remove a couple of definitions that were not used.
Always perform the partition validity checks when creating new
primary/extended/logical partitions, and also when a new partition
is automatically created when unpartitioned space is selected for
ReactOS installation.
CORE-12246
In Windows XP, both in On-Screen Keyboard and in Magnify there is a welcome box which is shown upon startup of the application. This feature is already implemented for Magnify in ReactOS which however in On-Screen Keyboard is still unimplemented.
* [MSPAINT] Fix scrollbar presence on canvas/view fitting
This is a small fix for a scrollbar related edge case functionality exhibited in mspaint (and in a lesser degree also elsewhere in instances of) scrollbar controlled content. As known, the scrollbars presence is given by the size ratio between the accommodating outer frame and the scroll-controlled contents inside it, and it works for the most part. There is, however, a case where the presence of both toolbars is kept even when the contents would fit the frame (if not for the scrollbars themselves that increase the size of the contents' area). Please take the current commit as a demo fix and a provisional correction for mspaint (as I think that the proper fix should reside in common controls).
* [MSPAINT] Fix a small mistake and improve readability in UpdateScrollbox()
Although with no visible impact on testing, I've used a wrong constant related to vertical scrollbox width in one instance (SM_CXHSCROLL instead of SM_CXVSCROLL), and this fixes it. Also, prefer using constants, to improve a bit readability and performance (by avoiding repeated function calls).
This will allow compatibility with modern OSes and
modern disk management utilities.
It will also improve performances by properly aligning
partition start.
And it will let enough room at the begin of the disk
for 3rd party bootloaders.
WARNING: this is not compatible with previous partition
model, and old one will likely not be compatible. You'll
have to erase your whole partition table and start from
scratch.
Simplified implementation of the proposed solution by George Bișoc
and revised by Victor Perevertkin from PR #952.
NOTE: For whatever reason ERROR_INSTALL_BOOTCODE and ERROR_WRITE_BOOT
seem to be redundant with each other. To be investigated...
Most of Linux filesystems have the MBR ID assigned as 0x83 and when the user chooses BTRFS upon partitions page wizard, we're thinking of the partition as having Ext2 filesystem which is wrong and misleading.
- Interface the TreeList code and populate it with the list of
discovered disks and partitions. Code is adapted from USETUP.
Also display the names of the disks.
- Display some installation settings summary, before doing the
installation proper.
- Force the user to select a checkbox when (s)he acknowledges that
ReactOS is alpha-quality software and may break on his/her computer
or corrupt his/her data.
- Improve wizard pages transitions and buttons enabling/disabling.
- Press Shift-F10 to start a command-line (as in the 2nd-stage setup
in syssetup.dll).
- Use some explicit UNICODE functions/macros.
Add the TreeList control from Anton Zechner and Sébastien Kirche
from https://github.com/sebkirche/treelist (under GPL-3.0+) as a
*TEMPORARY* solution until a better-suited control for ReactOS is
developed.
- Compilation fixes for the TreeList control.
- SETUPLIB and USETUP: Convert PARTENTRY::DriveLetter to WCHAR.
- SETUPLIB: Retrieve volume label.
- SETUPLIB and USETUP: Move the partition types (IDs) table from
USETUP to SETUPLIB so that they can share it with the 1st-stage
GUI installer too. Also take the opportunity to update the table
with information from http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
and cross-checked with the list from Paragon Hard-Disk Manager.
- USETUP: Simplify PrintPartitionData().
- Add some code comments.
This increases performance for each time the SETUPLIB calls (using NT paths)
Win32 SetupAPI functions which of course only accept Win32 paths.
- Handle also the fact that a NT path to convert may start with
\Device\HarddiskX\PartitionY\..., which can be a symlink to
\Device\HarddiskVolumeN\... on some systems. In that case, the
Win32 path mapping should be done slightly differently.
- Add support for network mapped drives.
- Improve UI usage and wizard transitions (Work In Progress).
- Add interfacing code that display installation status.
- When the user attempts to cancel the installation during file copying,
pause the file copying, and restart it if the user changes it mind and
wants to continue the installation. Otherwise file copying is properly
halted.
- BOOTDATA: Use standard INF signature string, so that they can be
opened successfully using ReactOS' or Windows' setupapi.dll with
the INF_STYLE_WIN4 style.
- SETUPLIB: Use the correct INF_STYLE_* INF styles in SpInfOpenInfFile() calls.
- REACTOS : Switch thread locale to user-specified LocaleId when calling
SetupOpenInfFileW(), so that the correct localized strings are used.
- In PrepareCopyInfFile(), explicitly use AddSectionToCopyQueueCab()
to retrieve the files from the CAB INF.
Otherwise if one continued to use and rely on AddSectionToCopyQueue()
to do this job instead, bad things could happen like, re-enumerating
twice or more (and adding them to the file queue) the same files.
This is because in the new code AddSectionToCopyQueue() can be called
many times to deal with different SIF file sections. The old code then
called AddSectionToCopyQueueCab() in turn, but on the same list...
Now the steps performed are clear, and everything works as intended.
- Simplify the code that computes the full source and destination paths
for the files to be copied and directories to be created, using helper
functions.
- Compute the source file and target location from the TXTSETUP.SIF
entries in a NT-compatible manner.
- Use adequate access flag when opening symbolic links.
- Simplify the prototype of UpdateRegistry() since now both Setup INF
handle and settings lists are inside the USETUP_DATA structure.
This means, call in the correct order the user callback with the correct
parameters (in particular the correct paths for file copy operations),
and check also for the callback returned value to know whether or not to
continue the file operations.
This allows using some of the SetupApi.dll functions when SETUPLIB is
used in the (Win32) GUI 1st-stage installer "REACTOS", while using the
custom implemented NT-aware functions in "USETUP".
- Add support for delete and move/rename operations, which are needed
for implementing ReactOS upgrading support.
- Use cabinet contexts.
- Use standard LIST_ENTRY structures for implementing the lists.
- Move the path-building hack code in SetupCommitFileQueueW() that had
been introduced in r66604 (97bb83f) out of the file-queues code.
- Make the function prototypes compatible with win32's setupapi functions.
- Fix the format of the data passed to the custom notification handler.
- Adjust the file-copy callback to correctly use its arguments (setupapi-compatible).
- Move a great deal of global variables into the USETUP_DATA structure
(the SetupInf, the SetupFileQueue, the generic lists...).
- Place the common setup initialization code into an InitializeSetup()
routine, and the cleanup code into FinishSetup().
- Implement the setup-code part support for the TXTSETUP.SIF setup
source path override variables "SetupSourceDevice" and "SetupSourcePath"
(see CORE-9023); support for them in SETUPLDR will be added later.
- In the 1st-stage GUI setup, display the list of existing discovered
NTOS installations, with its name, installation path and vendor name,
and an associated icon.
svn path=/branches/setup_improvements/; revision=75544
[SETUP:REACTOS] More interfacing of the 1st-stage GUI installer with the setuplib.
- Add a ConvertNtPathToWin32Path() helper function that allows converting
NT paths like: \Device\CdRom0\i386\txtsetup.sif file into a Win32 path
that the Win32 versions of the SetupApi functions (e.g. SetupOpenInfFileW)
can accept.
Note that RtlNtPathNameToDosPathName() cannot be used here because this
function only works for NT paths within the \DosDevices\ (or \??\) NTObj
directory, and not in other directories.
- Use this helper function in the implementation of SetupOpenInfFileExW.
Now the txtsetup.sif function can be loaded by setuplib *when being used*
by the 1st-stage GUI installer!
- Remove deprecated code.
svn path=/branches/setup_improvements/; revision=75668
svn path=/branches/setup_improvements/; revision=75721
svn path=/branches/setup_improvements/; revision=75750
- Remove a non-recurring job from the job list after starting it.
- Remove a recurring job from the start list, calculate its next start time and insert it again.
- Calculate the timeout for the next job.
This includes also to remove the created symlinks.
Symlinks deletion is special, as one has to open first the symlink
itself (and not its target), then remove the "SymbolicLinkTarget" value
before really deleting the key. Of course everything must be done under
proper access rights.
Additional changes:
- Change prototype BOOLEAN CmpLinkKeyToHive(...) to NTSTATUS CreateSymLinkKey(...).
- Silence few DPRINTs.
- Document some FIXMEs that I need to inspect later on ReactOS.
- HKEY --> HANDLE.
- It can therefore be also used by the 1st-stage GUI setup.
- Rename some function parameters to clarify what they should be.
Based on:
svn path=/branches/setup_improvements/; revision=75750
Additions:
- Use explicit __cdecl calling convention for variadic functions.
- Fix also the whitespace in consup.h.
svn path=/branches/setup_improvements/; revision=75749
[USETUP] Improve usage of ERROR_TXTSETUP_SECTION and ERROR_CABINET_SECTION error codes, correctly display associated error message, and remove a deprecated string.
- Apart from allowing a UI cache variable that may be used when
displaying GENERIC_LIST_ENTRY-ies, do not store any display strings
associated to these list entries. They should be instead computed only
when initializing a list UI (or a combo-box or list control if the
code is used in Win32 environment).
For this matter a callback is provided to InitGenericListUi() that
does the job of computing the displayed string corresponding to a
given GENERIC_LIST_ENTRY.
- Simplify the calls to InitGenericListUi(), and refactor the
RestoreGenericListUiState() function.
- Use for-loops for iterating over GENERIC_LIST items.
- Adapt the storage data format for lists of settings items.
- The txtsetup.sif INF format specified in LoadSetupInf() should not be
INF_STYLE_WIN4 (to be investigated...).
- Use OBJ_CASE_INSENSITIVE when initializing object attributes
(no actual reason why to keep case sensitivity there).
- Check the success of a RtlStringCchPrintfW call in EnumerateReactOSEntries().
- Explicitly check for returned STATUS_NOT_SUPPORTED from ChkdskPartition()
or FormatPartition(), and display an appropriate error message.
- Remove some left-over comments but also explain why I kept some
commented code (mainly for future reference).
Comment about the status of two '#if 0'.
[SETUPLIB] Fix some uninitialized variables (caught by clang-cl).
Also, initialize NtName->Length in return paths in ResolveArcNameManually().
Only convert to ANSI when needed (e.g. in the display code for usetup).
The 1st-stage GUI setup will however use the UNICODE strings directly.
svn path=/branches/setup_improvements/; revision=75753
[SETUPLIB] Copy the mui* files from usetup into the setuplib for later usage, and add mui.c to build.
svn path=/branches/setup_improvements/; revision=75711
[SETUPLIB][USETUP] Start massaging the MUI files and split up what concerns only the usetup "resources",
and what concerns general language parameters (in the setuplib).
It may be interesting to retrieve the language parameters
from INF file (e.g. intl.inf) (suggested by Giannis).
svn path=/branches/setup_improvements/; revision=75715
[SETUPLIB] Add the necessary headers to mui.c to be able to compile.
[USETUP] Comment out the languages that don't have any resources.
svn path=/branches/setup_improvements/; revision=75716
[SETUPLIB][USETUP] Adjust MUI and settings code.
- Re-enable settings code concerning language, keyboards & layout
in the setuplib, and remove the old code in usetup.
- Remove useless code in setuplib's mui.c.
- Rename usetup's MUI "LanguageList" into "ResourceList" so as to
avoid colliding with the "LanguageList" of setuplib.
- Add the magic CMakeLists line "add_definitions(${I18N_DEFS})" that
I forgot previously, that caused the "LanguageList" of setuplib to be empty!
The code compiles and works during my tests.
svn path=/branches/setup_improvements/; revision=75717
[SETUPLIB] Change some string pointer types & function prototypes so that the usetup-specific
"SelectedLanguageId" variable is not used in the library.
svn path=/branches/setup_improvements/; revision=75719
[SETUPLIB] Change some function prototypes so that the usetup-specific "SelectedLanguageId" variable is not used in the library.
Also, make AddEntriesFromInfSection(), DefaultProcessEntry() and the typedef PPROCESS_ENTRY_ROUTINE private again.
svn path=/branches/setup_improvements/; revision=75720
svn path=/branches/setup_improvements/; revision=75724
[USETUP] Code adaptations.
- Transform some do{}while() loops into while(){} ones, since the lists on which we work may only contain one single {NULL} element.
- Modify MUIGetOEMCodePage() call after r75719.
- Use PCWSTR where needed.
svn path=/branches/setup_improvements/; revision=75722
[USETUP] Adjust some MUI & settings calls, following the commits r75719, r75720 and r75721.
svn path=/branches/setup_improvements/; revision=75723
[INPUT.CPL] Adjust inclusion of "muifonts.h" (commit 3dbd44f) due to changes introduced in r75711 and r75715.
Use WaitForMultipleObjects in the mail scheduler loop:
- Use events to signal service stop and job update events to the main loop.
- Use the timeout timer to start the next job.
This code is moved ther since it'll be needed for 1st-stage GUI
installer as well.
The code dealing with keyboard layouts is however not moved yet,
since it uses MUI* functions from usetup.
I'll try to think how to include that in setuplib...
svn path=/branches/setup_improvements/; revision=75701
Move the bootsup.c code into the setuplib, as the code is generic
enough to be used by both USETUP and the 1st-stage GUI installer.
svn path=/branches/setup_improvements/; revision=75674
This helper is inspired by the reactos/reactos.c!LoadGenEntry() function.
Use this helper in the different Create*List() functions.
svn path=/branches/setup_improvements/; revision=75700
