for better system diagnostics, we *ALWAYS* want to record the parent
pid of a user process, regardless of if the child will post a wait
record on exit or not.
for that, we reverse the roles of Proc.parent and Proc.parentpid so
Proc.parentpid will always be set on rfork() and the Proc.parent
pointer will point to the parent's Proc structure or is set to nil
when no wait record should be posted on exit (RFNOWAIT flag).
this means that we can get the pid of the original parent process
from /proc, regardless of the the child having rforked with the
RFNOWAIT flag. this improves the output of pstree(1) somewhat if
the parent is still alive. note that theres no guarantee that the
parent pid is still valid.
the conditions are unchanged:
a user process that will post wait record has:
up->kp == 0 && up->parent != nil && up->parent->pid == up->parentpid
the boot process is:
up->kp == 0 && up->parent == nil && up->parentpid == 0
and kproc's have:
up->kp != 0 && up->parent == nil && up->parentpid == 0
Ori_B reports that his controller gets stuck in the ahciencreset()
wait loop. so we implement a 1000 ms timeout. we replace delay()
with esleep() as we are always called from the ledkproc().
blink() could enter infinite delay loop as well, so instead of
waiting for the message to get transmitted we exit making it
non-blocking (we will get called again anyway).
the access to the controller map[] was wrong in ledkproc(). the
index is the controller number, not the drive number!
when making outgoing connections, the source ip was selected
by just iterating from the first to the last interface and
trying each local address until a route was found. the result
was kind of hard to predict as it depends on the interface
order.
this change replaces the algorithm with the route lookup algorithm
that we already have which takes more specific desination and
source prefixes into account. so the order of interfaces does
not matter anymore.
on 386, the kernel memory region is mapped using huge 4MB pages
(when supported by the cpu). so the uncached pte manipulation
does not work to map the cursor data with uncached attribute.
instead, we allocate a memory page using newpage() and map
it globally using vmap(), which maps it uncached.
after issuing CR_RESETEP command, we have to invalidate
the endpoints output context buffer so that the halted/error
status reflects the new state. not doing so resulted in
the halted state to be stuck and we continued issuing
endpoint reset commands when we where already recovered.
handle the devusb Ep.clrhalt flag from devusb that userspace
uses to force a endpoint reset on the next transaction.
permission checking had the "other" and "owner" bits swapped plus incoming
connections where always owned by "network" instead of the owner of
the listening connection. also, ipwstat() was not effective as the uid
strings where not parsed.
this fixes the permission checks for data/ctl/err file and makes incoming
connections inherit the owner from the listening connection.
we also allow ipwstat() to change ownership to the commonuser() or anyone
if we are eve.
we might have to add additional restrictions for none at a later point...
we want devip to get reattached after hostowner has been written. factotum
already handles this with a private authdial() routine that mounts devip
when it is not present. so we detach devmnt before starting factotum,
and attach once factotum finishes.
the locking in proctext() is wrong. we have to acquire Proc.seglock
when reading segments from Proc.seg[] as segments do not
have a private freelist and can therefore be reused for other
data structures.
once we have Proc.seglock acquired, check that the process pid
is still valid so we wont accidentally read some other processes
segments. (for both proctext() and procctlmemio()). this also
should give better error message to distinguish the case when
the process did segdetach() the segment in question before we
could acquire Proc.seglock.
declare private functions as static.
there was a small window between modifying mmutop and switching the
asid where the core could bring in the new entries under the old asid
into the tlb due to speculation / prefetching.
this change moves the entering of the page tables into mmutop after
setttbr() to prevent this scenario.
due to us switching to the resereved asid 0 on procsave()->putasid(),
the only asid that could have potentially been poisoned would be asid 0
which does not have any user mappings. so this did not show any noticable
effect.
pexit() and pprint() can get called outside of a syscall
(from procctl()) with a process that is in active note
handling and require floating point in the kernel on amd64
for aesni (devtls).
make exec() clear the per process error string
to avoid spurious errors and confusion.
the errstr() syscall used to always swap the
maximum buffer size with memmove(), which is
problematic as this gives access to the garbage
beyond the NUL byte. worse, newproc(), werrstr()
and rerrstr() only clear the first byte of the
input buffer. so random stack rubble could be
leaked across processes.
we change the errstr() syscall to not copy
beyond the NUL byte.
the manpage also documents that errstr() should
truncate on a utf8 boundary so we use utfecpy()
to ensure proper NUL termination.
the idea is to catch bugs and make kernel exploitation
harder by mapping the kernel text section readonly
and everything else no-execute.
l.s maps the KZERO address space using 2MB pages so
to get the 4K granularity for the text section we use
the new ptesplit() function to split that mapping up.
we need to set EFER no-execute enable bit early
in apbootstrap so secondary application processors
will understand the NX bit in our shared kernel page
tables. also APBOOTSTRAP needs to be kept executable.
rebootjump() needs to mark REBOOTADDR page executable.
the user should not be able to change the cache
attributes for a segment in segattach() as this
can cause the same memory to be mapped with
conflicting attributes in the cache.
SG_TEXT should always be mapped with SG_RONLY
attribute. so fix data2txt() to follow the rules.
fault() now has an additional pc argument that is
used to detect fault on a non-executable segment.
that is, we check on read fault if the segment
has the SG_NOEXEC attribute and the program counter
is within faulting page.
a portable SG_NOEXEC segment attribute was added to allow
non-executable (physical) segments. which will set the
PTENOEXEC bits for putmmu().
in the future, this can be used to make non-executable
stack / bss segments.
the SG_DEVICE attribute was added to distinguish between
mmio regions and uncached memory. only matterns on arm64.
on arm, theres the issue that PTEUNCACHED would have
no bits set when using the hardware bit definitions.
this is the reason bcm, kw, teg2 and omap kernels use
arteficial PTE constants. on zynq, the XN bit was used
as a hack to give PTEUNCACHED a non-zero value and when
the bit is clear then cache attributes where added to
the pte.
to fix this, PTECACHED constant was added.
the portable mmu code in fault.c will now explicitely set
PTECACHED bits for cached memory and PTEUNCACHED for
uncached memory. that way the hardware bit definitions
can be used everywhere.
on the 2GB and 4GB raspberry pi 4 variants, there are two
memory regions for ram:
[0x00000000..0x3e600000)
[0x40000000..0xfc000000)
the framebuffer is somewhere at the end of the first
GB of memory.
to handle these, we append the region base and limit
of the second region to *maxmem= like:
*maxmem=0x3e600000 0x40000000 0xfc000000
the mmu code has been changed to have non-existing
ram unmapped and mmukmap() now uses small 64K pages
instead of 512GB pages to avoid aliasing (framebuffer).
the VIRTPCI mapping has been removed as we now have
a proper vmap() implementation which assigns vritual
addresses automatically.
this adds a 4GB KMAP window into the kernel address space
so we can access all physical ram on raspberry pi 4 for
user pages.
note that kernel memory above KZERO is still limited
to 1GB because of DMA restrictions.
according to the following linux change, BCM2711 uses a different
method for changing pullup/down mode:
abcfd09286 (diff-cf078559c38543ac72c5db99323e236d)
gpiomeminit() was broken, using virtual address for the gpio physseg
instead of the physical one.
cleanup the code, avoid repetition by declaring static u32int *regs
variable. make local variable names consistent.
the raspberry pi 4 has a new interrupt controller and
pci support, so get rid of intrenable() macro and
properly make intrenable function with tbdf argument.
the raspberry pi4 firmware refuses to enable the GIC interrup controller
for arm64 when the .img file is not a multiple of 4 bytes. yes, this
is insane and nowhere documented.
the new raspberry pi 4 firmware for arm64 seems to have
broken atag support. so we now parse the device tree
structure to get the bootargs and memory configuration.
Ori Bernstein had Sunrise Point-H USB 3.0 xHCI Controller that would mysteriously
crash on the 5th ENABLESLOT command. This was reproducable by even just allocating
slots in a loop right after init.
It turns out, the 1.2 spec extended the Max Scratchpad Buffers in HCSPARAMS2 so our
driver would not allocate enougth scratchpad buffers and controller firmware would
crash once it went beyond our allocated scratchpad buffer array.
This change also fixes:
- ignore bits 16:31 in PAGESIZE register
- preserve bits 10:31 in the CONFIG register
- handle ADDESSDEV command failure (so it can be retried)
preallocate 2% of user pages for page tables and MMU structures
and keep them mapped in the VMAP range. this leaves more space
in the KZERO window and avoids running out of kernel memory on
machines with large amounts of memory.
always clean AND invalidate caches before dma read,
never just invalidate as the buffer might not be
aligned to cache lines...
we have to invalidate caches again *AFTER* the dma
read has completed. the processor can bring in data
speculatively into the cache while the dma in in
flight.
we override atag memory on reboot, so preserve
the memsize learned from atag as *maxmem plan9
variable. the global memsize variable is not
needed anymore.
avoid trashing the following atag when zero
terminating the cmdline string.
zero memory after plan9.ini variables.
the Ipselftab is designed to not require locking on read
operation. locking the selftab in ipselftabread() risks
deadlock when accessing the user buffer creates a fault.
remove unused fields from the Ipself struct.
initialize the rate limits when the device gets
bound, not when it is created. so that the
rate limtis get reset to default when the ifc
is reused.
adjust the burst delay when the mtu is changed.
this is to make sure that we allow at least one
full sized packet burst.
make a local copy of ifc->m before doing nil
check as it can change under us when we do
not have the ifc locked.
specify Ebound[] and Eunbound[] error strings
and use them consistently.
remove references to the unused Conv.car qlock.
ipifcregisterproxy() is called with the proxy
ifc wlock'd, which means we cannot acquire the
rwlock of the interfaces that will proxy for us
because it is allowed to rlock() multiple ifc's
in any order. to get arround this, we use canrlock()
and skip the interface when we cannot acquire the
lock.
the ifc should get wlock'd only when we are about
to modify the ifc or its lifc chain. that is when
adding or removing addresses. wlock is not required
when we addresses to the selfcache, which has its
own qlock.
mark reader process pointers with (void*)-1 to mean
not started yet. this avoids the race condition when
media unbind happens before the kproc has set its
Proc* pointer. then we would not post the note and
the reader would continue running after unbind.
etherbind can be simplified by reading the #lX/addr
file to get the mac address, avoiding the temporary
buffer.
when the exclusive monitor is cleared, a event is generated
which we can use to wake up idlehands. that way we do not
need to wait for the next timer interrupt until a cpu takes
work from the run queue.
we did not interpret the $rootdir and $rootspec environment
variables right. $rootdir is what gets bound to / (usually /root)
and $rootspec is the mountspec of /root.
i'v been seeing the error condition described above in the
Slowbulkin comment. so i'm enabling the work arround which
seems to fix the lockup.
in the split transaction case where we want to start the
transaction at frame start, acquire the ctlr lock *before*
checking if we are in the right frame number. so the start
will happen atomically. checking the software ctlr->sofchan
instead of checking the interrupt mask register seems to
be quicker.
setting the haint mask bit for the chan under ctlr lock
in chanio() instead of chanwait() avoids needing to acquire
the ctlr lock twice.
mask wakechan bits with busychan bitmap in interrupt handlers
so we will not try to wake up released chans by accident.
sleep() and tsleep() might get interrupted so we have to
release the split qlock in the split transaction case and
in all cases, make sure to halt the channel before release.
add some common debug functions to dump channel and controller
registers.
we have to ensure that all stores saving the process state
have completed before setting up->mach = nil in the scheduler.
otherwise, another cpu could observe up->mach == nil while
the stores such as the processes p->sched label have not finnished.
attached is a patch to fix receive in the 8169 chip on my thinkpad
A485. i'm not sure why, but the same thing was done in 3d56a0fc4645
for Macv45.
nick
some control transactions can confuse the xhci controller so
much that it even fails to respond to command abort or STOPEP
control command. with no way for us to abort the transaction
but a full controller reset.
we give the controller 5 seconds to abort our initial
transaction and if that fails we wake the recover process
to reset the controller.
thanks mischief for testing.
the temporary stack segment used to be at a fixed address above or
below the user stack. these days, the temp stack is mapped dynamically
by sysexec so TSTKTOP is obsolete.
between being commited to a machno and having acquired the lock, the
scheduler could come in an schedule us on a different processor. the
solution is to have dtmachlock() take a special -1 argument to mean
"current mach" and return the actual mach number after the lock has
been acquired and interrupts being disabled.
using ~IP_DF mask to select offset and "more fragments" bits
includes the evil bit 15. so instead define a constant IP_FO
for the fragment offset bits and use (IP_MF|IP_FO). that way
the evil bit gets ignored and doesnt cause any useless calls
to ipreassemble().
tested on a t43 with igfx and a 1600x1200 t43p screen
what works: lvds, blanking
what doesn't: hwgc (not visible), snarfing edid
untested: vga
based on realemu traces.
unfraglen() had the side effect that it would always copy the
nexthdr field from the fragment header to the previous nexthdr
field. this is fine when we reassemble packets but breaks
fragments that we want to just forward unchanged.
given that we now keep the block size consistent with the
ip packet size, the variable header part of the ip packet
is just: BLEN(bp) - fp->flen == fp->hlen.
fix bug in ip6reassemble() in the non-fragmented case:
reload ih after ip header was moved before writing ih->ploadlen.
use concatbloc() instead of pullupblock().
some protocols assume that Ip4hdr.length[] and Ip6hdr.ploadlen[]
are valid and not out of range within the block but this has
not been verified. also, the ipv4 and ipv6 headers can have variable
length options, which was not considered in the fragmentation and
reassembly code.
to make this sane, ipiput4() and ipiput6() now verify that everything
is in range and trims to block to the expected size before it does
any further processing. now blocklen() and Ip4hdr.length[] are conistent.
ipoput4() and ipoput6() are simpler now, as they can rely on
blocklen() only, not having a special routing case.
ip fragmentation reassembly has to consider that fragments could
arrive with different ip header options, so we store the header+option
size in new Ipfrag.hlen field.
unfraglen() has to make sure not to run past the buffer, and hadle
the case when it encounters multiple fragment headers.
all screen implementations use a Memimage* internally
for the framebuffer, so we can return a shared reference
to its Memdata structure in attachscreen() instead of
a framebuffer data pointer.
this eleminates the softscreen == 0xa110c hack as we
always use shared Memdata* now.
Under the normal close sequence, when we receive a FIN|ACK, we enter
TIME-WAIT and respond to that LAST-ACK with an ACK. Our TCP stack would
send an ACK in response to *any* ACK, which included FIN|ACK but also
included regular ACKs. (Or PSH|ACKs, which is what we were actually
getting/sending).
That was more ACKs than is necessary and results in an endless ACK storm
if we were under the simultaneous close sequence. In that scenario,
both sides of a connection are in TIME-WAIT. Both sides receive
FIN|ACK, and both respond with an ACK. Then both sides receive *those*
ACKs, and respond again. This continues until the TIME-WAIT wait period
elapses and each side's TCP timers (in the Plan 9 / Akaros case) shut
down.
The fix for this is to only respond to a FIN|ACK when we are in TIME-WAIT.
always start the pager kproc in swapinit(), simplifying kickpager().
allow zero conf.nswap and conf.nswppo. avoid allocating the reference
map and iolist arrays in that case.
use ulong for ioptr and iolist indices.
don't panic when writing pages out to the swapfile fails. just
requeue the page in the io transaction list so we will try
again next time executeio() is run or just free the page when
the swap reference was dropped.
remove unused pagersummary() function.
the FCA registers 0x28, 0x2C have been reassigned to
to FEXTNVM on i217, i218 and i219 so add Fnofca flag
and avoid writing the registers.
make link detection more robust on i217 by delaying the
phy status read after link status change by 150ms. we'd
otherwise get a "phy wedged" (power saving state?) and
not update the link status until the next link change.
the max packet size is configured in 1K increments on these chips,
which can result in the card receiving a 10K packet but the
driver having only allocated 9.5K of buffer. this actually caued
pool corruption with i210, i217, i218, i219, i350.
for 82598 and x550, we explicitely round rbsz to avoid similar bugs
in the future, even tho the Rbsz constant was already a multiple of
1K and is not affected by the bug.
segclock() has to be called from hzclock(), otherwise
only processes running on cpu0 would catche the interrupt
and the time delta would be wrong.
lock the segment when allocating Seg->profile as
profile ctl might be issued from multiple processes.
Proc->debug qlock is not sufficient.
Seg->profile can never be freed or reallocated once
set as the timer interrupt accesses it without any
locking.
instead of having application processors spin in mpshutdown()
with mmu on, and be subject to reboot() overriding kernel text
and modifying page tables, park the application processors in
rebootcode idle loop with the mmu off.
linux will send small, unpadded arp packets which may arrive over
wifi, so allow small packets into the bridge and pad any packets that
are too small when going out.
coproc.c generated the instrucitons anew each time,
requiering a i+d cache flush for each operation.
instead, we can speed this up like this:
given that the coprocessor registers are per cpu, we can
assume that interrupts have already been disabled by
the caller to prevent a process switch to another cpu.
we cache the instructions generated in a static append
only buffer and maintain separate end pointers for each
cpu.
the cache flushes only need to be done when new
operations have been added to the buffer.
reference: https://github.com/raspberrypi/firmware/issues/542
procsave(Proc* p)
{
uvlong t;
cycles(&t);
p->pcycles += t;
// TODO: save and restore VFPv3 FP state once 5[cal] know the new registers.
fpuprocsave(p);
/*
* Prevent the following scenario:
* pX sleeps on cpuA, leaving its page tables in mmul1
* pX wakes up on cpuB, and exits, freeing its page tables
* pY on cpuB allocates a freed page table page and overwrites with data
* cpuA takes an interrupt, and is now running with bad page tables
* In theory this shouldn't hurt because only user address space tables
* are affected, and mmuswitch will clear mmul1 before a user process is
* dispatched. But empirically it correlates with weird problems, eg
* resetting of the core clock at 0x4000001C which confuses local timers.
*/
if(conf.nmach > 1)
mmuswitch(nil);
}
- clean dcache before turning off caches and mmu (rebootcode.s)
- use WFE and inter-core mailboxes for cpu startup (rebootcode.s)
- disable SMP during dcache invalidation before enabling caches and mmu (in armv7.s)
- synchronize rebootcode installation
- handle the 1MB identity map in mmu.c (mmuinit1())
- do not overlap CONFADDR with rebootcode, the non boot
processors are parked there.
- make REBOOTADDR physical address
- disable local clock on interrupt to prevent accidents when reenabling
- always regitster local clock interrupt handler, even for cpu0
- simplify microdelay()
- don't mess with watchdog
when clering smi enable bits in the legacy control/status register,
preserve the reserved bits. clear the RW1C bits.
linux code claims intel xhci controller needs a 1ms delay before
accessing any register after reset.
pcienable() puts a device in fully powered on state
and does some missing initialization that UEFI might
have skipped such as I/O and Memory requests being
disabled.
pcidisable() is ment to shutdown the device, but
currently just disables dma to prevent accidents.
on Samsung ATIV Smart PC Pro XE00T1C-A01CL, the EHCI handoff
causes the system to freeze in UEFI mode as soon as we assert
the os semaphore bit.
until a general solution is found, provide these parameters to
disable the handoff for now as it seems to otherwise work fine.
when a prefix is added with the onlink flag clear, packets
towards that prefix needs to be send to the default gateway
so we omit adding the interface route.
when the on-link flag gets changed to 1 later, we add the
interface route.
the on-link flag is sticky, so theres no way to clear it back
to zero except removing and re-adding the prefix.
Once a second rebalance() is called on cpu0 to adjust priorities,
so cpu-bound processes won't lock others out. However it was only
adjusting processes which were running on cpu0. This was observed
to lead to livelock, eg when a higher-priority process spin-waits
for a lock held by a lower priority one.
syntax: reboot!bootfile[!method...]
this echos bootfile to /dev/reboot, causing bootfile kernel
to be started.
when method is given, we first connect to the filesystem and
set bootargs so that bootfile can be loaded from the target
network or local fileserver.
note, when no bootfile is given, this causes the kernel to
reboot to bios.
the end condition port < offset+n could never become
false when offset truncated to 32 bit signed port is
negative. change the condition variables to unsigned
int.
msr's are not byte addressible, so advance reads by
one instead of 8.
sending multicast was broken when ipconfig assigned the 0
address for dhcp as they would wrongly classified as Runi.
this could happen when we do slaac and dhcp in parallel,
breaking the sending of router solicitations.
now handle the supported rates element properly, only
providing the intersecting set of rates that the bss
advertises and what the driver supports, putting the
basic rates first.
also avoid using usupported rates.
nobody passes us the "RSD PTR " address when doing multiboot/kexec
on UEFI systems. so we search for it manually in the ACPI reserved
area as indicated in the e820 memory map.
