extract1() expects two extra bytes to be avilabe before
fname buffer so it can prepend ./ before the name. this
used to be the case with name(), but was violated when
long name support was added and getname() was used in
place of name() which did not reserve the 2 extra bytes.
this change reserves two extra bytes in the getname()'s
static buffer and also removes the extra copy as name()
already makes a copy.
Since numeric timezone offsets are relative to GMT, initialise zone to
GMT so tm2sec(2) does not assume local time.
Note that if strtotm encounters a timezone *string* and consequently
overwrites zone then we will end up in the same mess since tm2sec(2)
only deals with GMT or local time.
there was a race between the sendproc putting the request on
the sreqrd[] id and the recvproc handling the response, and
potentially freeing the request before the sendproc() was
finished with the request (or the fid).
so we defer allocating a request id and putting it on the
sreqrd[] stage after we have completely generated the
request in vpack(). this prevents the handling of the request
before it is even sent.
this also means that the SReq should not be touched after
calling sendpkt(), submitreq(), submitsreq().
secondly, putsfid() needs to acquire the RWLock to make sure
sendproc() is finished with the request. the scenario is that
recvproc() can call respond() on the request before sendproc()
has unlocked the SFid.
move digest pointer into Mtree structrue and embed it into Idx struct
(which is embedded in Message) to avoid one level of indirection
during mtreecmp().
get rid of mtreeisdup(). instead we have mtreeadd() return the old
message in case of a collision. this avoids double lookup.
increase the hash table size for henter() and make it a prime.
on 386, the kernel memory region is mapped using huge 4MB pages
(when supported by the cpu). so the uncached pte manipulation
does not work to map the cursor data with uncached attribute.
instead, we allocate a memory page using newpage() and map
it globally using vmap(), which maps it uncached.
after issuing CR_RESETEP command, we have to invalidate
the endpoints output context buffer so that the halted/error
status reflects the new state. not doing so resulted in
the halted state to be stuck and we continued issuing
endpoint reset commands when we where already recovered.
handle the devusb Ep.clrhalt flag from devusb that userspace
uses to force a endpoint reset on the next transaction.
for servers that handle incoming network connections and authentication,
change the owner of the network connection file to the authenticated user
after successfull authentication.
note that we set the permissions as well to 0660 because old devip used
to unconditionally set the bits.
permission checking had the "other" and "owner" bits swapped plus incoming
connections where always owned by "network" instead of the owner of
the listening connection. also, ipwstat() was not effective as the uid
strings where not parsed.
this fixes the permission checks for data/ctl/err file and makes incoming
connections inherit the owner from the listening connection.
we also allow ipwstat() to change ownership to the commonuser() or anyone
if we are eve.
we might have to add additional restrictions for none at a later point...
we want devip to get reattached after hostowner has been written. factotum
already handles this with a private authdial() routine that mounts devip
when it is not present. so we detach devmnt before starting factotum,
and attach once factotum finishes.
the locking in proctext() is wrong. we have to acquire Proc.seglock
when reading segments from Proc.seg[] as segments do not
have a private freelist and can therefore be reused for other
data structures.
once we have Proc.seglock acquired, check that the process pid
is still valid so we wont accidentally read some other processes
segments. (for both proctext() and procctlmemio()). this also
should give better error message to distinguish the case when
the process did segdetach() the segment in question before we
could acquire Proc.seglock.
declare private functions as static.
there was a small window between modifying mmutop and switching the
asid where the core could bring in the new entries under the old asid
into the tlb due to speculation / prefetching.
this change moves the entering of the page tables into mmutop after
setttbr() to prevent this scenario.
due to us switching to the resereved asid 0 on procsave()->putasid(),
the only asid that could have potentially been poisoned would be asid 0
which does not have any user mappings. so this did not show any noticable
effect.
when a process state has not been saved (Proc.mach != nil)
then the contents of Proc.sched should be considered invalid.
to approximate a stacktrace in this case, we use the error
stack and get a stacktrace from the last waserror() call.
pexit() and pprint() can get called outside of a syscall
(from procctl()) with a process that is in active note
handling and require floating point in the kernel on amd64
for aesni (devtls).
This fixes ocaml on non-x86 architectures, where we have code
that looks like:
#define Fl_head ((uintptr_t)(&sentinel.first_field))
Without this change, we get an error about a non-constant
initializer. This change takes the checks for pointers and
makes them apply to all expressions. It also makes the checks
stricter, preventing the following from compiling to junk:
int x;
int y = 42;
int *p = &x + y
the following code reproduces the crash:
void
foo(void)
{
}
void
main(int argc, char **argv)
{
(void)(1 ? (void)0 : foo());
}
the problem is that side() gives a false positive on the OCOND
with later constant folding eleminating the acutal side effect
and OCAST ending up with two nested OCATS with the nested one
being zapped (type == T).
make exec() clear the per process error string
to avoid spurious errors and confusion.
the errstr() syscall used to always swap the
maximum buffer size with memmove(), which is
problematic as this gives access to the garbage
beyond the NUL byte. worse, newproc(), werrstr()
and rerrstr() only clear the first byte of the
input buffer. so random stack rubble could be
leaked across processes.
we change the errstr() syscall to not copy
beyond the NUL byte.
the manpage also documents that errstr() should
truncate on a utf8 boundary so we use utfecpy()
to ensure proper NUL termination.
kvik writes:
dnsquery(8) prints the interactive prompt on stdout together with
query results, making scripted usage unnecessarily difficult.
A straightforward solution is prompting on stderr instead: as
practiced by rc(1), among many others -- promptly taking care of
the issue:
; echo 9front.org mx | ndb/dnsquery >[2]/dev/null
kvik writes:
I needed to convert the RSA private key that was laying around in
secstore into a format understood by UNIX® tools like SSH.
With asn12rsa(8) we can go from the ASN.1/DER to Plan 9 format, but not
back - so I wrote the libsec function asn1encodeRSApriv(2) and used it in
rsa2asn1(8) by adding the -a flag which causes the full private key to be
encoded and output.
the idea is to catch bugs and make kernel exploitation
harder by mapping the kernel text section readonly
and everything else no-execute.
l.s maps the KZERO address space using 2MB pages so
to get the 4K granularity for the text section we use
the new ptesplit() function to split that mapping up.
we need to set EFER no-execute enable bit early
in apbootstrap so secondary application processors
will understand the NX bit in our shared kernel page
tables. also APBOOTSTRAP needs to be kept executable.
rebootjump() needs to mark REBOOTADDR page executable.
mischief reports:
this assembler input assembles with 6a but makes 6l crash.
// 6a l.s
// 6l l.6
// _intrr: unknown relation: TEXT in _intrr
// 6l 511: suicide: sys: trap: fault write addr=0x18 pc=0x20789c
TEXT noteret(SB), 1, $-4
CLI
JMP _intrestore // works when commented
TEXT _intrr(SB), 1, $-4
_intrestore:
RET
TEXT _main(SB), 1, $-4
RET
the user should not be able to change the cache
attributes for a segment in segattach() as this
can cause the same memory to be mapped with
conflicting attributes in the cache.
SG_TEXT should always be mapped with SG_RONLY
attribute. so fix data2txt() to follow the rules.
fault() now has an additional pc argument that is
used to detect fault on a non-executable segment.
that is, we check on read fault if the segment
has the SG_NOEXEC attribute and the program counter
is within faulting page.
a portable SG_NOEXEC segment attribute was added to allow
non-executable (physical) segments. which will set the
PTENOEXEC bits for putmmu().
in the future, this can be used to make non-executable
stack / bss segments.
the SG_DEVICE attribute was added to distinguish between
mmio regions and uncached memory. only matterns on arm64.
on arm, theres the issue that PTEUNCACHED would have
no bits set when using the hardware bit definitions.
this is the reason bcm, kw, teg2 and omap kernels use
arteficial PTE constants. on zynq, the XN bit was used
as a hack to give PTEUNCACHED a non-zero value and when
the bit is clear then cache attributes where added to
the pte.
to fix this, PTECACHED constant was added.
the portable mmu code in fault.c will now explicitely set
PTECACHED bits for cached memory and PTEUNCACHED for
uncached memory. that way the hardware bit definitions
can be used everywhere.
on the 2GB and 4GB raspberry pi 4 variants, there are two
memory regions for ram:
[0x00000000..0x3e600000)
[0x40000000..0xfc000000)
the framebuffer is somewhere at the end of the first
GB of memory.
to handle these, we append the region base and limit
of the second region to *maxmem= like:
*maxmem=0x3e600000 0x40000000 0xfc000000
the mmu code has been changed to have non-existing
ram unmapped and mmukmap() now uses small 64K pages
instead of 512GB pages to avoid aliasing (framebuffer).
the VIRTPCI mapping has been removed as we now have
a proper vmap() implementation which assigns vritual
addresses automatically.
this adds a 4GB KMAP window into the kernel address space
so we can access all physical ram on raspberry pi 4 for
user pages.
note that kernel memory above KZERO is still limited
to 1GB because of DMA restrictions.
according to the following linux change, BCM2711 uses a different
method for changing pullup/down mode:
abcfd09286 (diff-cf078559c38543ac72c5db99323e236d)
gpiomeminit() was broken, using virtual address for the gpio physseg
instead of the physical one.
cleanup the code, avoid repetition by declaring static u32int *regs
variable. make local variable names consistent.
the raspberry pi 4 has a new interrupt controller and
pci support, so get rid of intrenable() macro and
properly make intrenable function with tbdf argument.
the raspberry pi4 firmware refuses to enable the GIC interrup controller
for arm64 when the .img file is not a multiple of 4 bytes. yes, this
is insane and nowhere documented.
the new raspberry pi 4 firmware for arm64 seems to have
broken atag support. so we now parse the device tree
structure to get the bootargs and memory configuration.
Ori Bernstein had Sunrise Point-H USB 3.0 xHCI Controller that would mysteriously
crash on the 5th ENABLESLOT command. This was reproducable by even just allocating
slots in a loop right after init.
It turns out, the 1.2 spec extended the Max Scratchpad Buffers in HCSPARAMS2 so our
driver would not allocate enougth scratchpad buffers and controller firmware would
crash once it went beyond our allocated scratchpad buffer array.
This change also fixes:
- ignore bits 16:31 in PAGESIZE register
- preserve bits 10:31 in the CONFIG register
- handle ADDESSDEV command failure (so it can be retried)
preallocate 2% of user pages for page tables and MMU structures
and keep them mapped in the VMAP range. this leaves more space
in the KZERO window and avoids running out of kernel memory on
machines with large amounts of memory.
when a operation receives a chain of OINDEX nodes as its operands,
each indexing step used to allocate a new index register. this
is wastefull an can result in running out of fixed registers on 386
for code such as: x = a[a[a[a[i]]]].
instead we attempt to reuse the destination register of the operation
as the index register if it is not otherwise referenced. this results
in the index chain to use a single register for index and result and
leaves registers free to be used for something usefull instead.
for 6c, try to avoid R13 as well as BP index base register.
For ape, we never enabled warnings in cflags.
Turning it on brings up a lot of warnings. Most are noise,
but a few caught unused variables and trunctaions of pointers.
to smaller integers (int, long).
A few warnings remain.
To reproduce:
gs -q -dNOPAUSE -dSAFER '-sDEVICE=ppmraw' '-sOutputFile=/dev/null' <<.
%!PS-Adobe-3.0 EPSF-3.0
%%BoundingBox: -0 -0 100 100
/size_from 10000 def
/size_step 500 def
/size_to 65000 def
/enlarge 1000 def
%/bigarr 65000 array def
0
size_from size_step size_to {
pop
1 add
} for
/buffercount exch def
/buffersizes buffercount array def
0
size_from size_step size_to {
buffersizes exch 2 index exch put
1 add
} for
pop
/buffers buffercount array def
0 1 buffercount 1 sub {
/ind exch def
buffersizes ind get /cursize exch def
cursize string /curbuf exch def
buffers ind curbuf put
cursize 16 sub 1 cursize 1 sub {
curbuf exch 255 put
} for
} for
/buffersearchvars [0 0 0 0 0] def
/sdevice [0] def
enlarge array aload
{
.eqproc
buffersearchvars 0 buffersearchvars 0 get 1 add put
buffersearchvars 1 0 put
buffersearchvars 2 0 put
buffercount {
buffers buffersearchvars 1 get get
buffersizes buffersearchvars 1 get get
16 sub get
254 le {
buffersearchvars 2 1 put
buffersearchvars 3 buffers buffersearchvars 1 get get put
buffersearchvars 4 buffersizes buffersearchvars 1 get get 16 sub put
} if
buffersearchvars 1 buffersearchvars 1 get 1 add put
} repeat
buffersearchvars 2 get 1 ge {
exit
} if
%(.) print
} loop
.eqproc
.eqproc
.eqproc
sdevice 0
currentdevice
buffersearchvars 3 get buffersearchvars 4 get 16#7e put
buffersearchvars 3 get buffersearchvars 4 get 1 add 16#12 put
buffersearchvars 3 get buffersearchvars 4 get 5 add 16#ff put
put
buffersearchvars 0 get array aload
sdevice 0 get
16#3e8 0 put
sdevice 0 get
16#3b0 0 put
sdevice 0 get
16#3f0 0 put
currentdevice null false mark /OutputFile (%pipe%echo gotce)
.putdeviceparams
1 true .outputpage
.rsdparams
%{ } loop
0 0 .quit
%asdf
.
under heavy load, factotum can return a "too much activity" error,
which upas/smtpd and upas/smtp should consider a temporary error
instead of a permanent one.
implicit casts would cause spurious "result of operation not used"
warnings such as ape's stdio putc() macro.
make (void) casts non-ops when the casted expression has no
side effects. this avoid spurious warning with ape's assert()
macro.
for historical reasons, kenfs stores directory entries in pre 9p2000
format with directories having the QPDIR bit 31 set in the qid path.
however, the 64 bit fileserver allows 64 bit qid paths.
given that we do not support pre 9p2000 clients and do not rely on
the QPDIR, but want to keep the block check tags consistent, we will
*INVERT* the QPDIR bit in directory entry qid paths for directories.
this preserves the on-disk semantics (for < 31 bit qmax) but does
not complicate qid generation and recovery. also makes it easy to
convert between directory entry qid and 9p format.
C99 comments have been the default in compilers for something like 20 years
now. This means we don't need to remember to turn it on when porting software,
and gets rid of cryptic errors about unterminated character constants when
someone writes something like:
// Didn't need to...
We still accept the flag to avoid breaking mkfiles, but we do nothing with it.
This also removes the documentation, since the option does nothing now.
This change imports a few warnings and minor fixes from Charles branch
here: https://bitbucket.org/plan9-from-bell-labs/plan9.
The changes included here:
changeset: 1374:9185dc017be0
summary: declare castucom; move a declaration into order;
use cast instead of ULL suffix
changeset: 1353:5fe8380b1818
summary: supporting functions:
1. castucom to match unlikely mask operation;
2. be sure to snap both sides of pointer subtraction completely;
3. add extra operators as side-effect free
changeset: 1352:90058c092d66
summary: 1. correct result type for mixed-mode assignment operators
2. detect divide by zero (erik);
3. detect masks misformed by sign-extension;
4. diagnose mixed old/new prototypes
To complement the new cl-routes field, the bootp static routes option has been
renamed to cf-routes and the network/gateway pairs are separated with a right
arrow.
key exchange with git@github.com fails as they appear to try to
negotiate a mac algorithm even tho we use an AEAD cipher which
does not use a mac algorithm.
the work around is to supply a dummy mac algorithm that they
can negotiate to make them happy.
always clean AND invalidate caches before dma read,
never just invalidate as the buffer might not be
aligned to cache lines...
we have to invalidate caches again *AFTER* the dma
read has completed. the processor can bring in data
speculatively into the cache while the dma in in
flight.
Amavect wrote:
> mkone and mkmany have backwards targets for installing man pages.
> This patch makes 'mk man' actually work for mkfiles that include mkone.
> mkmany is not easily fixed without breaking changes.
> It may go without saying that external repos should write their own mkfiles.
we override atag memory on reboot, so preserve
the memsize learned from atag as *maxmem plan9
variable. the global memsize variable is not
needed anymore.
avoid trashing the following atag when zero
terminating the cmdline string.
zero memory after plan9.ini variables.
the Ipselftab is designed to not require locking on read
operation. locking the selftab in ipselftabread() risks
deadlock when accessing the user buffer creates a fault.
remove unused fields from the Ipself struct.
initialize the rate limits when the device gets
bound, not when it is created. so that the
rate limtis get reset to default when the ifc
is reused.
adjust the burst delay when the mtu is changed.
this is to make sure that we allow at least one
full sized packet burst.
make a local copy of ifc->m before doing nil
check as it can change under us when we do
not have the ifc locked.
specify Ebound[] and Eunbound[] error strings
and use them consistently.
remove references to the unused Conv.car qlock.
ipifcregisterproxy() is called with the proxy
ifc wlock'd, which means we cannot acquire the
rwlock of the interfaces that will proxy for us
because it is allowed to rlock() multiple ifc's
in any order. to get arround this, we use canrlock()
and skip the interface when we cannot acquire the
lock.
the ifc should get wlock'd only when we are about
to modify the ifc or its lifc chain. that is when
adding or removing addresses. wlock is not required
when we addresses to the selfcache, which has its
own qlock.
mark reader process pointers with (void*)-1 to mean
not started yet. this avoids the race condition when
media unbind happens before the kproc has set its
Proc* pointer. then we would not post the note and
the reader would continue running after unbind.
etherbind can be simplified by reading the #lX/addr
file to get the mac address, avoiding the temporary
buffer.
when the exclusive monitor is cleared, a event is generated
which we can use to wake up idlehands. that way we do not
need to wait for the next timer interrupt until a cpu takes
work from the run queue.
there appear to be devices out there such as Realtek RTL2838UHIDIR
SDR that do not process control transfers correctly, ignoring the
high byte of the wLength field. to work around this, we specify an
odd number of bytes for read sizes >= 256 which keeps the low byte
0xFF.
we did not interpret the $rootdir and $rootspec environment
variables right. $rootdir is what gets bound to / (usually /root)
and $rootspec is the mountspec of /root.
i'v been seeing the error condition described above in the
Slowbulkin comment. so i'm enabling the work arround which
seems to fix the lockup.
in the split transaction case where we want to start the
transaction at frame start, acquire the ctlr lock *before*
checking if we are in the right frame number. so the start
will happen atomically. checking the software ctlr->sofchan
instead of checking the interrupt mask register seems to
be quicker.
setting the haint mask bit for the chan under ctlr lock
in chanio() instead of chanwait() avoids needing to acquire
the ctlr lock twice.
mask wakechan bits with busychan bitmap in interrupt handlers
so we will not try to wake up released chans by accident.
sleep() and tsleep() might get interrupted so we have to
release the split qlock in the split transaction case and
in all cases, make sure to halt the channel before release.
add some common debug functions to dump channel and controller
registers.
we have to ensure that all stores saving the process state
have completed before setting up->mach = nil in the scheduler.
otherwise, another cpu could observe up->mach == nil while
the stores such as the processes p->sched label have not finnished.
vmx uses non portable word unpacking macros, breaking
the build for arm64. vmx only works on a pc anyway.
this forces objtype to 386 on these machines, similar
to what the kernel mkfiles do.
attached is a patch to fix receive in the 8169 chip on my thinkpad
A485. i'm not sure why, but the same thing was done in 3d56a0fc4645
for Macv45.
nick
some control transactions can confuse the xhci controller so
much that it even fails to respond to command abort or STOPEP
control command. with no way for us to abort the transaction
but a full controller reset.
we give the controller 5 seconds to abort our initial
transaction and if that fails we wake the recover process
to reset the controller.
thanks mischief for testing.
from what i can tell, sending port enable is a spec violation.
this fixes a hang during hub enumeration in the ASMedia
xhci controller when i plug in my IBM UltraNav SK-8845.
also, send unsuspend when port is suspended instead of enable.
from the USB 2 specification:
11.24.2.7.1.2 PORT_ENABLE
...
This bit may be set only as a result of a SetPortFeature(PORT_ENABLE).
...
The hub response to a SetPortFeature(PORT_ENABLE) request is not specified.
we have to explicitely convert to vlong by sign or
zero extending as not every operation leaves a proper
zero/sign extended result in the register. for example
NEGW will zero extend, breaking negative int offsets
on pointers.
we explicitely insert SXTW or MOVWU instructions which
the peephole optimizer takes out again when it is safe
todo so.
when promoting constant offsets to immediate offsets,
make sure the offset will be in range. otherwise the
linker will produce not so optimal pointer arithmetic
instructions to calculate the offset.
