CORE-16274
SETUPLIB:
=========
- Find the system partition initially when we create the list of
partitions.
- Split the old CheckActiveSystemPartition() helper in two helpers:
FindSupportedSystemPartition() and SetActivePartition(). This allows
simplifying slightly the former one, and allows the user, in an
interactive situation, to decide whether the "supported system
partition" found can actually be used or not.
- Remove the "OriginalSystemPartition" hack in the PARTLIST structure.
- Add a note regarding the SystemPartition member in PARTLIST.
USETUP:
=======
- Use the introduced helpers from above. If the "system" partition we
are going to use, in case we install ReactOS on a fixed disk, is *NOT*
the same as the original one (e.g. because it is detected to be not
supported by ReactOS...), display an informative screen to the user
and let him confirm whether or not he wants to change the partition.
If we install on a fixed disk, try to find a supported system partition
on the system. Otherwise if we install on a removable disk, use the
install partition as the system partition instead.
This allows providing a fix for CORE-16274.
SETUPLIB:
=========
- Remove useless HiddenSectors member in PARTENTRY structure.
- InsertDiskRegion() helper returns a BOOLEAN success.
- CreateInsertBlankRegion() helper sets LogicalPartition.
- Simplify the InitializePartitionEntry() helper so that its PartEntry
parameter is clearly the one that is being initialized (i.e. converted
from a blank region to) an actual partition, and use the helper
CreateInsertBlankRegion(). The calculations for the StartSector and
SectorCount are exactly equivalent with the old version of this
function. Also make it return a BOOLEAN success instead.
+ Add some extra validation checks.
+ Adjust CreatePrimaryPartition(), CreateExtendedPartition() and
CreateLogicalPartition() in this regard.
- Better handling of "RAW"-mounted partitions: treat them as
"Unformatted" only if they are RAW *AND* their PartitionType is one of
those associated with FAT file-system. Otherwise we cannot decide
whether they are indeed unformatted or have an unknown file-system on
them, therefore treat them as the latter.
In this regard, the IsSupportedActivePartition() helper should not
look for FileSystem == RAW but instead only look whether the partition
is Unformatted.
This should help with situations similar to the one described in CORE-16274
where a partition with a genuine file-system but not recognized by
ReactOS (because we currently do not have the EXT2/3/4 filesystem
driver loaded during 1st-stage setup due to commit 5a650f6b) and
therefore mounted as RAW, was thought to be unformatted.
USETUP:
=======
- Use the "global" SystemPartition pointer: this is the "system"
partition we will actually use. It can be different from the actual
one of the computer, for example when we install ReactOS on a
removable disk. This allows also to simplify the code.
- Remove the single-used DestinationDriveLetter variable.
- Remove BuildInstallPaths() helper and use InitDestinationPaths()
directly instead.
- Always mention the disk where the partition being formatted is.
- Cleanup old code comments, add assertions here & there...
Helvetica must be font substitute to Arial font.
- Change some Helvetica substitutes to "Arial" from "Liberation Sans". Not all Helvetica. Some languages are lacking support.
Add "Lucida Console" fonts. CORE-16264
- Add "Lucida Console" font by duplicating "DejaVu Sans Mono" font and renaming it.
- Delete some "Lucida Console" font substitutes.
- Add LICENSE file.
I used FontForge to rename it. Its family name is "Lucida Console". Its display name is "Lucida Console". Its font filename is lucon.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Trebuchet MS" fonts. CORE-16272
- Add "Trebuchet MS", "Trebuchet MS Bold", "Trebuchet MS Bold Italic" and "Trebuchet MS Italic" fonts by duplicating "Open Sans" fonts and renaming them.
- Delete some "Trebuchet MS" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Trebuchet MS". Their display names are "Trebuchet MS", "Trebuchet MS Bold", "Trebuchet MS Bold Italic" and "Trebuchet MS Italic". Their font filenames are trebuc.ttf, trebucbd.ttf, trebucbi.ttf and trebucit.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Times New Roman" fonts. CORE-16272
- Add "Times New Roman" and "Times New Roman Italic" fonts by duplicating "Liberation Serif" fonts and renaming them.
- Delete some "Times New Roman" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Times New Roman". Their display names are "Times New Roman", "Times New Roman Bold", "Times New Roman Bold Italic" and "Times New Roman Italic". Their font filenames are times.ttf, timesbd.ttf, timesbi.ttf and timesi.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Franklin Gothic Medium" fonts. CORE-16272
- Add "Franklin Gothic Medium" and "Franklin Gothic Medium Italic" fonts by duplicating Alexei Vanyashin's "Libre Franklin" fonts and renaming them.
- Delete some "Franklin Gothic Medium" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Franklin Gothic Medium". Their display names are "Franklin Gothic Medium" and "Franklin Gothic Medium Italic". Their font filenames are framd.ttf and framdit.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Alexei Vanyashin's "Libre Franklin" fonts are available at https://github.com/alexeiva/Libre-Franklin .
Add "Palatino Linotype" fonts. CORE-16272
- Add "Palatino Linotype", "Palatino Linotype Bold", "Palatino Linotype Bold Italic" and "Palatino Linotype Italic" fonts by duplicating "DejaVu Serif" fonts and renaming them.
- Delete some "Palatino Linotype" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Palatino Linotype". Their display names are "Palatino Linotype", "Palatino Linotype Bold", "Palatino Linotype Bold Italic" and "Palatino Linotype Italic". Their font filenames are pala.ttf, palab.ttf, palabi.ttf and palai.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Geogia" fonts. CORE-16272
- Add "Geogia", "Geogia Bold", "Geogia Bold Italic" and "Geogia Italic" fonts by duplicating FreeSerif fonts and renaming them.
- Delete some "Geogia" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Geogia". Their display names are "Geogia", "Geogia Bold", "Geogia Bold Italic" and "Geogia Italic". Their font filenames are georgia.ttf, georgiab.ttf, georgiaz.ttf and georgiai.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add "Courier New" fonts. CORE-16272
- Add "Courier New", "Courier New Bold", "Courier New Bold Italic" and "Courier New Italic" fonts by duplicating FreeMono fonts and renaming them.
- Delete some "Courier New" font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Courier New". Their display names are "Courier New", "Courier New Bold", "Courier New Bold Italic" and "Courier New Italic". Their font filenames are cour.ttf, courbd.ttf, courbi.ttf and couri.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
Add Arial fonts. CORE-16272
- Add "Arial", "Arial Bold", "Arial Bold Italic" and "Arial Italic" fonts by duplicating Liberation Sans fonts and renaming them.
- Disable some Arial font substitutes.
- Add LICENSE file.
I made these font files by using FontForge. Their family name is "Arial". Their display names are "Arial", "Arial Bold", "Arial Bold Italic" and "Arial Italic". Their font filenames are arial.ttf, arialbd.ttf, arialbi.ttf and ariali.ttf. The Underline Positions are hacked by adding an integer value for workaround of FontForge's bug.
By removing font substitution for 'Microsoft Sans Serif'.
Thanks to the patches author Katayama Hirofumi MZ.
This is a partial revert of the guilty rev
master guilty 0.4.13-dev-9-g
811faed421
RC guilty 0.4.12-RC-13-g
8d3def0529
VBox test result:
https://reactos.org/testman/compare.php?ids=68497,68499
The same fix has been applied before to 0.4.12-RC-44-g
ca0e00e8af
- Windows requires 16 bytes of response data.
- Add the PLUGPLAY_CONTROL_USER_RESPONSE_DATA type.
- Usetup and Umpnpmgr must fail if NtPlugPlayControl(PlugPlayControlUserResponse) does not return STATUS_SUCCESS.
Fixes GCC 8 warning:
base/setup/usetup/usetup.c:3407:78: error: '%S' directive writing up to 521 bytes into a region of size 200 [-Werror=format-overflow=]
"Setup is currently unable to check a partition formatted in %S.\n"
^~
base/setup/usetup/usetup.c:3406:9: note: 'sprintf' output between 128 and 649 bytes into a destination of size 260
sprintf(Buffer,
^~~~~~~~~~~~~~~
"Setup is currently unable to check a partition formatted in %S.\n"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"\n"
~~~~
" \x07 Press ENTER to continue Setup.\n"
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
" \x07 Press F3 to quit Setup.",
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PartEntry->FileSystem);
~~~~~~~~~~~~~~~~~~~~~~
Eliminate some bugs about font enumeration. CORE-15755
- Add "Microsoft Sans Serif" font substitution.
- Fix and improve the treatment of the nominal font names.
- Split IntGetFontFamilyInfo function from NtGdiGetFontFamilyInfo.
- Add DoFontSystemUnittest function for font system unittest to GDI32.
- Call DoFontSystemUnittest function at CreateFontIndirectW first call.
Nowadays more and more people try to install ReactOS from removable
drives (e.g. USB sticks) onto fixed HDDs, or try to install it into
USB sticks too.
Both fixed and removable drives, as well as partitions on these, are
represented in NT using the same device name format:
\Device\HarddiskM\PartitionN ,
with an increasing disk number M. Using this number for building the
corresponding firmware-specific ARC multi(x)disk(y)rdisk(z) path used
by the NT/ROS loader (FreeLdr, ...) is then prone to error since there
may have been removable drives inserted and accounted for in the
calculation of the disk number. These drives must be correctly
subtracted in order to generate the correct ARC path, valid once all
the removable drives have been ejected (which should also be the
situation seen from the BIOS when booting up, except of course if you
boot on a USB stick).
This problem is now solved. Note that it matters only for the disks
that have also been enumerated by the firmware (BIOS; Int 13h). We
don't have to care about the other drives, since the ARC path will be
of a different format and will not use the disk number (instead, the
SCSI coordinates are used).
We also try to enumerate all the disks found in all the possible disk
adapters and controllers enumerated in the Hardware registry tree
(and that are visible by FreeLdr) in order to cover all.
Finally, we detect whether a disk reports as a "super-floppy", i.e.
an unpartitioned disk with a valid VBR. This is indeed how a standard
floppy disk looks like, or how USB sticks are partitioned on Windows.
Such disk is reported has having only one single partition starting at
the beginning of the disk, with partition number == 0, its type being
FAT16 non-bootable.
This allows us to forbid creating any new partitions on such disks.
Note that accessing either \Device\HarddiskN\Partition0 or Partition1
on such a disk returns the same data.
Note also that on the contrary, regular MBR-partitioned disks would
report at least four partitions entries, instead of just one.
The other improvements are:
- Do *NOT* write any MBR on a disk partitioned as "super-floppy".
CORE-13703
- Fix the computed disk identifier, of format: %08x-%08x-%c .
The numbers are respectively the checksum of the first sector, and
the disk signature. The terminating letter is A or X, depending
whether the first sector ends with 0x55AA/0xAA55 or not (see also
commit 5053f1f5).
- Warn if the user attempts to install ReactOS on a disk that is not
visible by the firmware of his computer, because it may not be
bootable.
- Add also some validation ASSERTs and simplify the code here and there.
- The installation partition is called "InstallPartition", while the
global "CurrentPartition" is the disk region currently selected in
the partition UI list, on which prtitioning operations are effectued.
- Extend CheckActiveSystemPartition() to use an optional alternative
disk or partition in case the actual system partition (present in the
first disk) cannot be used, e.g. because we don't support writes on it.
- Find or set the active system partition only once, when we start the
formatting stage. If the system partition is to be created in some
non-partitioned space, we create it.
- A file-system check is always scheduled for both the system and the
installation partitions.
- If the system partition was already formatted (which usually means
that it already existed on the system), don't ask for formatting it.
CORE-13205
- For each partition to be formatted, the file-system menu list is
re-created, in order to display only the FSes that are compatible
with the selected partition, and allow to give the user the choice
to keep the existing file-system only if the selected partition was
already formatted.
- Check whether the user attempts to delete the partition on which
the installation source is present, only if it is not "new" and is
formatted.
- Check first whether the current partition is the system partition,
before displaying the CONFIRM_DELETE_SYSTEM_PARTITION_PAGE.
- Make some partitioning functions not dependent on the selected "CurrentPartition".
- Add some sanity checks.
- Improve some of the "is-partitioned" checks.
Similarly to FMIFS this structure should be private. Instead file-system
names are passed to the helper functions, allowing to use the names
returned by the FS drivers. The names are then internally mapped to the
corresponding FS providers.
In particular this allows to handle the "RAW" file-system and to assign
the 'Unformatted' flag to partitions having this FS.
Finally this helps us refining the checks performed to see whether the
current "active" system partition uses a supported file-system.
- Within the function's body code, check the status values returned by the called functions.
- Change the BuildInstallPaths's function type to NTSTATUS instead of VOID (and check the status of InitDestinationPaths() as well.
By default, we still fallback to FAT if nothing asked, or if there
is an invalid input.
0 is FAT, 1 is BtrFS. This can be grown as soon as we add more IFS.
[REG][REACTOS][EXPLORER][APPWIZ][CONSOLE][INETCPL][INPUT]
[INTL][OPENGLCFG][TIMEDATE][DEVCPUX][COMCTL32][COMDLG32]
[MSGINA][NETCFGX][NETID][SETUPAPI][SHELL32][SYSSETUP]
Update Simplified and Traditional Chinese translations.
- The converter is code7bit I made. code7bit: https://github.com/katahiromz/code7bit
- This converter converts non-clean characters in string literals.
- However I couldn't erase a ton of codepage C4819 warnings.
- CORE-15447
You can edit an European source file as follows:
- Right click the file in the Solution Explorer.
- Select "Open With...".
- Choose "C++ Source Code Editor (with encoding)".
- Choose "Central European (Windows) - Codepage 1260".
- Add checks for GPT disks and either fail or ignore the disk,
depending on the operation being executed.
[USETUP][REACTOS] Display the disk style more accurately.
CORE-7749
- Correctly insert discovered partitions in sorted order of StartSector,
and verify that they do not overlap (-> check for broken partitioning).
May help for CORE-10898.
- Use the correct reported partition numbers that may be modified after
partitioning changes, and that need to be used when opening
\Device\Harddisk'M'\Partition'N' files. This is achieving by
retrieving the returned value of the IOCTL_DISK_SET_DRIVE_LAYOUT call.
Distinguish them from the "on-disk" partition numbers that are the ones
that enumerate the partition in partition-table order (and is the order
known by e.g. the BIOS), and that should be used to construct the
destination ARC path.
May help for CORE-4870, CORE-13205.
- Simplify a lot of duplicated code by using helper functions.
Always perform the partition validity checks when creating new
primary/extended/logical partitions, and also when a new partition
is automatically created when unpartitioned space is selected for
ReactOS installation.
CORE-12246
This will allow compatibility with modern OSes and
modern disk management utilities.
It will also improve performances by properly aligning
partition start.
And it will let enough room at the begin of the disk
for 3rd party bootloaders.
WARNING: this is not compatible with previous partition
model, and old one will likely not be compatible. You'll
have to erase your whole partition table and start from
scratch.
Simplified implementation of the proposed solution by George Bișoc
and revised by Victor Perevertkin from PR #952.
NOTE: For whatever reason ERROR_INSTALL_BOOTCODE and ERROR_WRITE_BOOT
seem to be redundant with each other. To be investigated...
Most of Linux filesystems have the MBR ID assigned as 0x83 and when the user chooses BTRFS upon partitions page wizard, we're thinking of the partition as having Ext2 filesystem which is wrong and misleading.
- Interface the TreeList code and populate it with the list of
discovered disks and partitions. Code is adapted from USETUP.
Also display the names of the disks.
- Display some installation settings summary, before doing the
installation proper.
- Force the user to select a checkbox when (s)he acknowledges that
ReactOS is alpha-quality software and may break on his/her computer
or corrupt his/her data.
- Improve wizard pages transitions and buttons enabling/disabling.
- Press Shift-F10 to start a command-line (as in the 2nd-stage setup
in syssetup.dll).
- Use some explicit UNICODE functions/macros.
Add the TreeList control from Anton Zechner and Sébastien Kirche
from https://github.com/sebkirche/treelist (under GPL-3.0+) as a
*TEMPORARY* solution until a better-suited control for ReactOS is
developed.
- Compilation fixes for the TreeList control.
- SETUPLIB and USETUP: Convert PARTENTRY::DriveLetter to WCHAR.
- SETUPLIB: Retrieve volume label.
- SETUPLIB and USETUP: Move the partition types (IDs) table from
USETUP to SETUPLIB so that they can share it with the 1st-stage
GUI installer too. Also take the opportunity to update the table
with information from http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
and cross-checked with the list from Paragon Hard-Disk Manager.
- USETUP: Simplify PrintPartitionData().
- Add some code comments.
This increases performance for each time the SETUPLIB calls (using NT paths)
Win32 SetupAPI functions which of course only accept Win32 paths.
- Handle also the fact that a NT path to convert may start with
\Device\HarddiskX\PartitionY\..., which can be a symlink to
\Device\HarddiskVolumeN\... on some systems. In that case, the
Win32 path mapping should be done slightly differently.
- Add support for network mapped drives.
- Improve UI usage and wizard transitions (Work In Progress).
- Add interfacing code that display installation status.
- When the user attempts to cancel the installation during file copying,
pause the file copying, and restart it if the user changes it mind and
wants to continue the installation. Otherwise file copying is properly
halted.
- BOOTDATA: Use standard INF signature string, so that they can be
opened successfully using ReactOS' or Windows' setupapi.dll with
the INF_STYLE_WIN4 style.
- SETUPLIB: Use the correct INF_STYLE_* INF styles in SpInfOpenInfFile() calls.
- REACTOS : Switch thread locale to user-specified LocaleId when calling
SetupOpenInfFileW(), so that the correct localized strings are used.
- In PrepareCopyInfFile(), explicitly use AddSectionToCopyQueueCab()
to retrieve the files from the CAB INF.
Otherwise if one continued to use and rely on AddSectionToCopyQueue()
to do this job instead, bad things could happen like, re-enumerating
twice or more (and adding them to the file queue) the same files.
This is because in the new code AddSectionToCopyQueue() can be called
many times to deal with different SIF file sections. The old code then
called AddSectionToCopyQueueCab() in turn, but on the same list...
Now the steps performed are clear, and everything works as intended.
- Simplify the code that computes the full source and destination paths
for the files to be copied and directories to be created, using helper
functions.
- Compute the source file and target location from the TXTSETUP.SIF
entries in a NT-compatible manner.
