To complement the new cl-routes field, the bootp static routes option has been
renamed to cf-routes and the network/gateway pairs are separated with a right
arrow.
key exchange with git@github.com fails as they appear to try to
negotiate a mac algorithm even tho we use an AEAD cipher which
does not use a mac algorithm.
the work around is to supply a dummy mac algorithm that they
can negotiate to make them happy.
always clean AND invalidate caches before dma read,
never just invalidate as the buffer might not be
aligned to cache lines...
we have to invalidate caches again *AFTER* the dma
read has completed. the processor can bring in data
speculatively into the cache while the dma in in
flight.
Amavect wrote:
> mkone and mkmany have backwards targets for installing man pages.
> This patch makes 'mk man' actually work for mkfiles that include mkone.
> mkmany is not easily fixed without breaking changes.
> It may go without saying that external repos should write their own mkfiles.
we override atag memory on reboot, so preserve
the memsize learned from atag as *maxmem plan9
variable. the global memsize variable is not
needed anymore.
avoid trashing the following atag when zero
terminating the cmdline string.
zero memory after plan9.ini variables.
the Ipselftab is designed to not require locking on read
operation. locking the selftab in ipselftabread() risks
deadlock when accessing the user buffer creates a fault.
remove unused fields from the Ipself struct.
initialize the rate limits when the device gets
bound, not when it is created. so that the
rate limtis get reset to default when the ifc
is reused.
adjust the burst delay when the mtu is changed.
this is to make sure that we allow at least one
full sized packet burst.
make a local copy of ifc->m before doing nil
check as it can change under us when we do
not have the ifc locked.
specify Ebound[] and Eunbound[] error strings
and use them consistently.
remove references to the unused Conv.car qlock.
ipifcregisterproxy() is called with the proxy
ifc wlock'd, which means we cannot acquire the
rwlock of the interfaces that will proxy for us
because it is allowed to rlock() multiple ifc's
in any order. to get arround this, we use canrlock()
and skip the interface when we cannot acquire the
lock.
the ifc should get wlock'd only when we are about
to modify the ifc or its lifc chain. that is when
adding or removing addresses. wlock is not required
when we addresses to the selfcache, which has its
own qlock.
mark reader process pointers with (void*)-1 to mean
not started yet. this avoids the race condition when
media unbind happens before the kproc has set its
Proc* pointer. then we would not post the note and
the reader would continue running after unbind.
etherbind can be simplified by reading the #lX/addr
file to get the mac address, avoiding the temporary
buffer.
when the exclusive monitor is cleared, a event is generated
which we can use to wake up idlehands. that way we do not
need to wait for the next timer interrupt until a cpu takes
work from the run queue.
there appear to be devices out there such as Realtek RTL2838UHIDIR
SDR that do not process control transfers correctly, ignoring the
high byte of the wLength field. to work around this, we specify an
odd number of bytes for read sizes >= 256 which keeps the low byte
0xFF.
we did not interpret the $rootdir and $rootspec environment
variables right. $rootdir is what gets bound to / (usually /root)
and $rootspec is the mountspec of /root.
i'v been seeing the error condition described above in the
Slowbulkin comment. so i'm enabling the work arround which
seems to fix the lockup.
in the split transaction case where we want to start the
transaction at frame start, acquire the ctlr lock *before*
checking if we are in the right frame number. so the start
will happen atomically. checking the software ctlr->sofchan
instead of checking the interrupt mask register seems to
be quicker.
setting the haint mask bit for the chan under ctlr lock
in chanio() instead of chanwait() avoids needing to acquire
the ctlr lock twice.
mask wakechan bits with busychan bitmap in interrupt handlers
so we will not try to wake up released chans by accident.
sleep() and tsleep() might get interrupted so we have to
release the split qlock in the split transaction case and
in all cases, make sure to halt the channel before release.
add some common debug functions to dump channel and controller
registers.
we have to ensure that all stores saving the process state
have completed before setting up->mach = nil in the scheduler.
otherwise, another cpu could observe up->mach == nil while
the stores such as the processes p->sched label have not finnished.
vmx uses non portable word unpacking macros, breaking
the build for arm64. vmx only works on a pc anyway.
this forces objtype to 386 on these machines, similar
to what the kernel mkfiles do.
attached is a patch to fix receive in the 8169 chip on my thinkpad
A485. i'm not sure why, but the same thing was done in 3d56a0fc4645
for Macv45.
nick
some control transactions can confuse the xhci controller so
much that it even fails to respond to command abort or STOPEP
control command. with no way for us to abort the transaction
but a full controller reset.
we give the controller 5 seconds to abort our initial
transaction and if that fails we wake the recover process
to reset the controller.
thanks mischief for testing.
from what i can tell, sending port enable is a spec violation.
this fixes a hang during hub enumeration in the ASMedia
xhci controller when i plug in my IBM UltraNav SK-8845.
also, send unsuspend when port is suspended instead of enable.
from the USB 2 specification:
11.24.2.7.1.2 PORT_ENABLE
...
This bit may be set only as a result of a SetPortFeature(PORT_ENABLE).
...
The hub response to a SetPortFeature(PORT_ENABLE) request is not specified.
we have to explicitely convert to vlong by sign or
zero extending as not every operation leaves a proper
zero/sign extended result in the register. for example
NEGW will zero extend, breaking negative int offsets
on pointers.
we explicitely insert SXTW or MOVWU instructions which
the peephole optimizer takes out again when it is safe
todo so.
when promoting constant offsets to immediate offsets,
make sure the offset will be in range. otherwise the
linker will produce not so optimal pointer arithmetic
instructions to calculate the offset.
the possible bitmasks generated depend on the data width
of the instruction, so we introduce C_BITCON32 and C_BITCON64
operand types to keep them apart.
the encoding of the bitcon operation was wrong.
the temporary stack segment used to be at a fixed address above or
below the user stack. these days, the temp stack is mapped dynamically
by sysexec so TSTKTOP is obsolete.
return the error message from MSG_CHANNEL_OPEN_FAILURE
in the "connect" control write.
use a extra state "Finished" to distinguish server from client
initiated teardown. that way we do not need to track if we
send the MSG_CHANNEL_CLOSE message in closeclient(). this way
we also cannot be fooled by misbehaving server.
simplify hangupclient() by removing state transitions and doing
them in the caller explicitely. that way we can use hangupclient()
instead of dialedclient().
