Some SD card readers are slow to unstall. We try to unstall them
in a loop if there's no SD card in there, but they're not stalled.
They're happily reporting that there's no SD card in them by giving
back the appropriate error code.
Skipping the unstall speeds up the retry loop, cutting the time spent
attaching the USB device at boot from multiple minutes to nearly instant.
Force the cacheclear operation in the LRU cache trimming loop in order
to guarantee that the cache becomes smaller with each iteration.
Without the force flag cacheclear is a no-op for mailboxes that do not
provide a fetch function, e.g. POP3.
because a client might not handle resize, rio would try to move ther
window offsceen after 750 ms. however, it does this by window name,
which could have been reassigned by another concurrent rio, causing the
wrong window to disappear.
now we always move the window offscreen before freeimage(). this way we
are sure to still have the right reference to the original window.
segclock() has to be called from hzclock(), otherwise
only processes running on cpu0 would catche the interrupt
and the time delta would be wrong.
lock the segment when allocating Seg->profile as
profile ctl might be issued from multiple processes.
Proc->debug qlock is not sufficient.
Seg->profile can never be freed or reallocated once
set as the timer interrupt accesses it without any
locking.
to read the value of the stack pointer register, snap
used Machdata->szreg to determine the width of the
SP register in the Ureg structure. however, the value
does not match the Ureg.sp type for a number of architectures
(mips2, amd64) and it is unclear if this was an oversight
as it is rarely used (snap is indeed the only user) or
if it was intended for a different purpose.
so we use szaddr instead which matches the stack pointer
width in the Ureg and fixes the truncated stack issue on
amd64.
this can happen when the on the final sync when the mailbox
is being freed:
freembox -> mboxdecref -> syncmbox -> wridxfile -> pridx -> insurecache -> msgincref
syncmbox() used to enter the mailbox into the hash tree to
update the qid.vers. this is wrong when we are doing the final
sync before freeing the mailbox as the hash reference has already
been removed by freemailbox().
also avoid adding hash entries for mails for the about to be
freed mailbox in cachehash().
add function to check the refcounts for Mailbox and Message on a fid
use the full 64 bit of the qid.path, so we can use the full 32 bit for the id
instead of only maintaining refcount for the top message, msgincref() now
adds a reference to all its parent messages including self and top message.
then we can check in recursive delmessage() that all the parts have a zero
refcount.
remove the Fid.mtop field, it was never used.
make sure deletion and flag changes only affect the top message.
cachefree(): only look for top message in lru. sub-parts are never
added to the cache.
use the nparts field when reading sub-part of existing message, so
that we parse the index right in case the number of parts somehow
changed.
messages marked as Deleted but still in inbox should be written
to the index.
instead of having application processors spin in mpshutdown()
with mmu on, and be subject to reboot() overriding kernel text
and modifying page tables, park the application processors in
rebootcode idle loop with the mmu off.
to reproduce:
u8int x, y;
x = 0xff;
y = 0xc0;
if((s8int)(x & y) >= 0)
print("help\n");
compiles correctly but prints a warning
warning: test.c:11 useless or misleading comparison: UINT >= 0
the issue is that compar() unconditionally skipped over
all left casts ignoring the case when a cast would sign
extend the value.
the new code only skips over the cast when the original
type with is smaller than the cast result or when they
are equal width and types have same signedness. so the
effective left hand side type is the last truncation
or sign extension.
to get $"1 right, remove Xqdol() and instead implement it in
terms of Xdol() instruction and use the new Xqw() instruction
to quote the resulting list.
a deadlock has been observed with samterm (thanks burnzez),
that shows the mouse ioproc being stuck in sending on the
resize channel, while the mouse consumer is stuck in a
readmouse() loop wanting a rectangle to be drawn by the
user:
recv(v=0x42df50)+0x28 /sys/src/libthread/channel.c:321
readmouse(mc=0x42df50)+0x54 /sys/src/libdraw/mouse.c:34
getrect(.ret=0x41bce0,but=0x4,mc=0x42df50)+0x62 /sys/src/libdraw/getrect.c:49
r=0x41bc70
rc=0x41bc70
getr(rp=0x41bce0)+0x24 /sys/src/cmd/samterm/main.c:244
p=0x6b000004f6
r=0x2
sweeptext(new=0x0,tag=0x2d)+0x12 /sys/src/cmd/samterm/menu.c:208
r=0x2
t=0x42df50
inmesg(type=0x2,count=0x2)+0x1ab /sys/src/cmd/samterm/mesg.c:136
m=0x10000002d
l=0x2d00001b00
i=0x43829000000001
t=0x438290
lp=0x42e050
rcv()+0x7a /sys/src/cmd/samterm/mesg.c:77
threadmain(argv=0x7ffffeffef90)+0x173 /sys/src/cmd/samterm/main.c:63
so avoid blocking in the mouse ioproc by using nbsend()
instead of send() for writing to the resize channel.
linux will send small, unpadded arp packets which may arrive over
wifi, so allow small packets into the bridge and pad any packets that
are too small when going out.
touchscreens signal multiple contact points (X/Y) in
the hid descriptor separated by being nested in separate
collections. the contact point is identified by a
optional contact id. if omited, we use the collection
index and report id.
so we collect all the items (X/Y, buttons, wheel) from
separate collections in Hidslot structures and in the
end combine all the slots together.
buttons are or'ed together while absolute X/Y is applied
when it changed. relative X/Y deltas get added together.
thanks to kivik and Glats for testing.
respond to MSG_GLOBAL_REQUEST with MSG_REQUEST_FAILURE
as stated by rfc4254 when server wants a reply.
failing todo so breaks some proprietary keep-alive schemes.
coproc.c generated the instrucitons anew each time,
requiering a i+d cache flush for each operation.
instead, we can speed this up like this:
given that the coprocessor registers are per cpu, we can
assume that interrupts have already been disabled by
the caller to prevent a process switch to another cpu.
we cache the instructions generated in a static append
only buffer and maintain separate end pointers for each
cpu.
the cache flushes only need to be done when new
operations have been added to the buffer.
- make frame base pointer variable
- in rwreg(), save/restore the interpreter state and allocate a Frame* on the stack
- add overflow checks for frame base pointer to xec() and amleval()
- gc() scans the whole stack from FP to the *real* bottom F0
reference: https://github.com/raspberrypi/firmware/issues/542
procsave(Proc* p)
{
uvlong t;
cycles(&t);
p->pcycles += t;
// TODO: save and restore VFPv3 FP state once 5[cal] know the new registers.
fpuprocsave(p);
/*
* Prevent the following scenario:
* pX sleeps on cpuA, leaving its page tables in mmul1
* pX wakes up on cpuB, and exits, freeing its page tables
* pY on cpuB allocates a freed page table page and overwrites with data
* cpuA takes an interrupt, and is now running with bad page tables
* In theory this shouldn't hurt because only user address space tables
* are affected, and mmuswitch will clear mmul1 before a user process is
* dispatched. But empirically it correlates with weird problems, eg
* resetting of the core clock at 0x4000001C which confuses local timers.
*/
if(conf.nmach > 1)
mmuswitch(nil);
}
- clean dcache before turning off caches and mmu (rebootcode.s)
- use WFE and inter-core mailboxes for cpu startup (rebootcode.s)
- disable SMP during dcache invalidation before enabling caches and mmu (in armv7.s)
- synchronize rebootcode installation
- handle the 1MB identity map in mmu.c (mmuinit1())
- do not overlap CONFADDR with rebootcode, the non boot
processors are parked there.
- make REBOOTADDR physical address
- disable local clock on interrupt to prevent accidents when reenabling
- always regitster local clock interrupt handler, even for cpu0
- simplify microdelay()
- don't mess with watchdog
revert last change, which used games/wadfs to expose genmidi and music lumps.
replacements from patch wads were never seen that way. instead, write genmidi
and music lumps to /tmp and play them from there.
combining marks will have zero advance, but it results in zero-width
glyphs in subfonts. fall back to width so something meaningful is
rendered even if its not combined properly.
when clering smi enable bits in the legacy control/status register,
preserve the reserved bits. clear the RW1C bits.
linux code claims intel xhci controller needs a 1ms delay before
accessing any register after reset.
pcienable() puts a device in fully powered on state
and does some missing initialization that UEFI might
have skipped such as I/O and Memory requests being
disabled.
pcidisable() is ment to shutdown the device, but
currently just disables dma to prevent accidents.
on Samsung ATIV Smart PC Pro XE00T1C-A01CL, the EHCI handoff
causes the system to freeze in UEFI mode as soon as we assert
the os semaphore bit.
until a general solution is found, provide these parameters to
disable the handoff for now as it seems to otherwise work fine.
when a prefix is added with the onlink flag clear, packets
towards that prefix needs to be send to the default gateway
so we omit adding the interface route.
when the on-link flag gets changed to 1 later, we add the
interface route.
the on-link flag is sticky, so theres no way to clear it back
to zero except removing and re-adding the prefix.
automatic Referer headers were found to break downloads from
sourceforge.net, causing html pages to appear instead of tarballs.
if a website does need them, they can be added as needed via hget's -r
flag, or added to mothra.
reverts commits 67f536d20329 and 6d999c39a9f0
Once a second rebalance() is called on cpu0 to adjust priorities,
so cpu-bound processes won't lock others out. However it was only
adjusting processes which were running on cpu0. This was observed
to lead to livelock, eg when a higher-priority process spin-waits
for a lock held by a lower priority one.
syntax: reboot!bootfile[!method...]
this echos bootfile to /dev/reboot, causing bootfile kernel
to be started.
when method is given, we first connect to the filesystem and
set bootargs so that bootfile can be loaded from the target
network or local fileserver.
note, when no bootfile is given, this causes the kernel to
reboot to bios.
the end condition port < offset+n could never become
false when offset truncated to 32 bit signed port is
negative. change the condition variables to unsigned
int.
msr's are not byte addressible, so advance reads by
one instead of 8.
Xpipefd wants the pipe descriptor to be closed in turfredir(), so
it pushes the redirection, but this breaks Xpopredir after normal
redirection. so we shuffle the Xpipefd redir to the bottom of the
stack.
- plumbsel()
- remove debug prints
- use smalloc() to convert to bytes
- fix spurious -1 close of plumb fd
- snarfsel()
- fix rune buffer leak in open error case
Ori Bernstein wrote:
> I finally got around to taking another shot at this vt patch. This change
> gets rid of implicit snarfing, and instead makes selection the way you
> select text for snarfing or plumbing. Select, then use a menu entry.
>
> It would probably be nice to have double click to expand the selection,
> rio-style, along with plumbing implicitly taking the current word, but
> that can be a separate patch.
>
> This change also punts on scrolling for simplicity -- it clears the
> selection instead of trying to handle the cases where the selection
> goes offscreen.
little amendments:
- fix line selection (point min/max inversion)
- clear selection when switching linesel/blocksel
- move selection on scroll
the arp table is per interface, so it is possible to have the same
netwrok on multiple physical interfaces, tho with different source
ip address. one example would be a ethernet and a wlan interface.
the mac addresses on these mediums can differ (arp proxying taking
place).
so provide our source address on the interface we received the
request on.
the previous change used the ifcaddr; which is correct; but due to a
oversight in the kernel, had to match the ip of the arp entry.
source address will always work.
unless relay agent (gaddr) is specified, dhcp requests need to
taget a local ip address on the incoming interface or broadcast.
clients might have multiple ethernet interfaces, so we need to
check if any of the ether= attributes in ndb matches. this is
done by passing lookupip() the attribute name and a expected
value and if a match is found, set Info.indb = 1.
remove tohex(), use encodefmt instead. avoid dynamcic allocation.
include interface device in log messages.