we did not interpret the $rootdir and $rootspec environment
variables right. $rootdir is what gets bound to / (usually /root)
and $rootspec is the mountspec of /root.
i'v been seeing the error condition described above in the
Slowbulkin comment. so i'm enabling the work arround which
seems to fix the lockup.
in the split transaction case where we want to start the
transaction at frame start, acquire the ctlr lock *before*
checking if we are in the right frame number. so the start
will happen atomically. checking the software ctlr->sofchan
instead of checking the interrupt mask register seems to
be quicker.
setting the haint mask bit for the chan under ctlr lock
in chanio() instead of chanwait() avoids needing to acquire
the ctlr lock twice.
mask wakechan bits with busychan bitmap in interrupt handlers
so we will not try to wake up released chans by accident.
sleep() and tsleep() might get interrupted so we have to
release the split qlock in the split transaction case and
in all cases, make sure to halt the channel before release.
add some common debug functions to dump channel and controller
registers.
we have to ensure that all stores saving the process state
have completed before setting up->mach = nil in the scheduler.
otherwise, another cpu could observe up->mach == nil while
the stores such as the processes p->sched label have not finnished.
vmx uses non portable word unpacking macros, breaking
the build for arm64. vmx only works on a pc anyway.
this forces objtype to 386 on these machines, similar
to what the kernel mkfiles do.
attached is a patch to fix receive in the 8169 chip on my thinkpad
A485. i'm not sure why, but the same thing was done in 3d56a0fc4645
for Macv45.
nick
some control transactions can confuse the xhci controller so
much that it even fails to respond to command abort or STOPEP
control command. with no way for us to abort the transaction
but a full controller reset.
we give the controller 5 seconds to abort our initial
transaction and if that fails we wake the recover process
to reset the controller.
thanks mischief for testing.
from what i can tell, sending port enable is a spec violation.
this fixes a hang during hub enumeration in the ASMedia
xhci controller when i plug in my IBM UltraNav SK-8845.
also, send unsuspend when port is suspended instead of enable.
from the USB 2 specification:
11.24.2.7.1.2 PORT_ENABLE
...
This bit may be set only as a result of a SetPortFeature(PORT_ENABLE).
...
The hub response to a SetPortFeature(PORT_ENABLE) request is not specified.
we have to explicitely convert to vlong by sign or
zero extending as not every operation leaves a proper
zero/sign extended result in the register. for example
NEGW will zero extend, breaking negative int offsets
on pointers.
we explicitely insert SXTW or MOVWU instructions which
the peephole optimizer takes out again when it is safe
todo so.
when promoting constant offsets to immediate offsets,
make sure the offset will be in range. otherwise the
linker will produce not so optimal pointer arithmetic
instructions to calculate the offset.
the possible bitmasks generated depend on the data width
of the instruction, so we introduce C_BITCON32 and C_BITCON64
operand types to keep them apart.
the encoding of the bitcon operation was wrong.
the temporary stack segment used to be at a fixed address above or
below the user stack. these days, the temp stack is mapped dynamically
by sysexec so TSTKTOP is obsolete.
return the error message from MSG_CHANNEL_OPEN_FAILURE
in the "connect" control write.
use a extra state "Finished" to distinguish server from client
initiated teardown. that way we do not need to track if we
send the MSG_CHANNEL_CLOSE message in closeclient(). this way
we also cannot be fooled by misbehaving server.
simplify hangupclient() by removing state transitions and doing
them in the caller explicitely. that way we can use hangupclient()
instead of dialedclient().
in mux mode, ssh relays raw MSG_CHANNEL_*
messages on standard input and output while
still handling authentication and key exchange
internally.
the intend is to use the mux mode to implement
something like the old sshnet ontop of ssh.
