this allows members of the -1 group to create new directories in /
without having to fiddle with the fileserver console. this also
makes it consistent to hjfs and cwfs.
this allows members of the -1 group to create new directories in /
without having to fiddle with the fileserver console. this also
makes it consistent to hjfs.
the psaux driver is not used in any kernel configuration and theres
no userspace mouse daemon. i8042auxcmds() is wrong as access
to the user buffer can fault and we are holding an ilocks.
little cleanups in devkbd.
on vmware, loading a new kernel sometimes reboots when
wiggling the mouse. disabling keyboard and mouse on
shutdown fixes the issue.
make sure ps2 mouse is disabled on init, will get re-enabled
in i8042auxenable().
keyboard isnt special anymore, we can just use the devreset
entry point in the device to do the keyboard initialization,
so kbdinit()/kbdenable() are not needed anymore.
the keyboard stops sending interrupts when its fifo gets full,
which can happen on boot when keys get mashed while interrupts
are still disabled. to work arround this, call the keyboard
interrupt handler when kbd.q is starved before blocking.
interpreting octal breaks parsing of decimal numbers with
leading zeros. the manpage listed this in the BUGS section,
so we'r going to fix it as this just causes confusion as
most callers of atoi() do not expect it.
add bootscreenconf(VGAscr *) function, that is called whenever
the framebuffer configuration is changed by devvga. that way, we
can pass the current setting of the framebuffer to the new
kernel when using /dev/reboot.
parsecookie() used to inplace modify the request path
for implicit path (to get the directory from path) and
also did it wrong. now have a static copy and do not
remove the last slash.
as usual, the dude with the hardware vanished so i cannot
develop this further. setting mode worked the last time
but only when using vesa before, so some bits are still
missing. commiting this as it is so i dont have to start
from scratch once we have hardware again.
basedefault[], the default path to the config file, is never set and remains
blank, unless -config %s is used (cd d_main.c). when games/doom attempts to
open the file, it silently fails and no config file is ever read or written.
this patch sets basedefault to a file in whatever directory a valid wad is
found in I_IdentifyWAD().
due to a typo in p_inter.c:P_TouchSpecialThing(), a message that is supposed
to show up when the player picks up a medikit while low on health (< 25), is
never displayed. the check for low health is done after the health is already
increased, so the condition is never true.
a cosmetic bug in all old doom executables that also seems interesting to fix.
to test: compare message displayed when picking up a medikit with and without
the patch
due to a typo in st_stuff.c:ST_updateFaceWidget(), doomguy mistakenly never
looks shocked when taking more than 20 damage, but rather when he gains more
than 20 health while being hit.
this is a cosmetic bug in all old versions of doom's executables, but it seems
appropriate to fix.
simple test: fire a rocket at a nearby wall, taking enough damage.
these emulate bugs present in select versions of the released doom executables.
they are required to correctly play demos recorded with these but affect the
gameplay, so should be otherwise disabled.
-nobounce: lost souls don't bounce off floors and ceilings like intended due
to a misplaced check; this is fixed from ultimate doom on, but doom and doom2
are still affected.
-noztele: in final doom 1.9, things' altitude was erroneously not set to the
floor's height after teleporting. this was fixed in later versions of the
executables.
examples of desyncing demos:
(plutonia.wad, without -noztele) http://doomedsda.us/lmps/946/2/30pl2646.zip
(doom2.wad, without -nobounce) http://doomedsda.us/lmps/945/3/30nm2939.zip
gamemode is set according to the name of the main wad (cf. d_main.c), i.e.:
- doom1.wad: (shareware doom1, ep1 only) gamemode == shareware
- doom.wad: (registered doom1, ep1-3) gamemode == registered
- doomu.wad: (ultimate doom, ep1-4) gamemode == retail
- doom2.wad, plutonia.wad, tnt.wad: gamemode == commercial
most doom.wad's distributed online are, in fact, ultimate doom.
if your ultimate doom wad is correctly named doomu.wad, some switches in
episodes 2-4 won't swap their texture when toggled, because
p_switch.c:P_InitSwitchList() is only checking for registered doom1.
easy way to test: demo2 in either registered or ultimate doom: the player flips
a switch right at the beginning of the demo; if the main wad is called
doomu.wad, the switch won't change its texture.
% games/doom -playdemo demo2
if you rename the wad to doom.wad or alter d_main.c:IdentifyVersion, the switch
will swap its texture like it should.
this function is used when playing demos from external lumps. the game just
exits without this patch.
to test this, download a demo lump from somewhere, and play it with -playdemo %s
where %s is the file's name, without the .lmp extension:
(note that this one is a doom 2 demo, so it requires doom2.wad)
% hget http://doomedsda.us/lmps/945/3/30nm2939.zip | unzip -sv
extracting 30nm2939.LMP
extracting 30nm2939.txt
% mv 30nm2939.LMP 30nm2939.lmp # checking for a lump filename is case sensitive
% games/doom -playdemo 30nm2939
the game exits when the demo ends. also, note that this demo will desync on
map06 (the crusher), because of an unrelated bug (that's another patch :>)
note: filelength() returns vlong, but file lengths for doom lumps are ints.
however, this might be used elsewhere (networking), so i'd leave it this way.
when cookie is domain=example.com, then we implicitely add
dot to the domain name, which made us reject the cookie as the
request domain "example.com" != ".example.com". fix by making
isdomainmatch() skip the implicit dot in pattern before string
comparsion.
when there where multiple syscalls returning out of order,
it would print blank lines between the exits. avoid this
by remembering if the last char written was a newline and
conditionally insert newline on out of order return.
sometimes, ratrace would return before all messages have
been printed. make the writer process the parent so ratrace
wont exit until all readers are finished avoiding the
problem.
we already export mntauth() and mntversion(), so why not stop
being sneaky and just export mntattach() so bindmount() and
devshr can just call it directly with proper arguments being
checked.
we can also avoid handling #M attach specially in namec()
by having the devmnt's attach function do error(Enoattach).
to avoid double caching, attachimage() and setswapchan() clear
the CCACHE flag on the channel but this keeps the read ahread
state of the cache arround (until the chan gets closed), so also
call cclunk() to detach the mcp and free the read ahead state.
avoid the call to cread() when CCACHE flag is clear.
use the actual iounit returned from Ropen/Rcreate to chunk reads and writes
instead of c->mux->msize-IOHDRSZ.
dont preallocate the rpc buffers to msize, most 9p requests are rather small
(except Twrite of course). so we allocate the buffer on demand in mountio()
with some rounding to avoid frequent reallocations.
avoid malloc()/free() while holding mntalloc lock.
this changes devmnt adding mntrahread() function and some helpers
for it to do pipelined sequential read ahead for the mount cache.
basically, cread() calls mntrahread() with Mntrah structure and it
figures out if we where reading sequentially and if thats the case
issues reads of c->iounit size in advance.
the read ahead state (Mntrah) is kept in the mount cache so we can
handle (read ahead) cache invalidation in the presence of writes.
Tflush handling was wrong, we cannot respond to the old
request if we have not actually removed the req from the
in progress block queue.
when reads are issued concurrently, we have to set b->len
before the block is inserted into the inprogress list.
otherwise findblock() is unable to find it and no requests
can be queued on the block. this caused the same offset
to be downloaded multiple times.
set the errstr in getrange() so in case of an error, we dont
get some random previous error string.
as the Fgrp can be shared with other processes, we have to
recheck the fd index after locking the Fgrp in fdclose()
to make sure not to read beyond the bounds of the fd array.
using the user buffer has a race where the user can modify
the buffer from another process before it is copied into the cache.
this allows poisoning the cache for every file where the user
has read access.
instead, we update the cache from kernel memory.
*after* writing, the directory tree gets alphabetically sorted for
path table. this causes data to not be in the same order as it was
written causing seeks when taring up the filesystem.
so instead write the files in alphabetical order as well to better
match the directory sorting.
data on the disk is layed out sequentially and directory information
is at the end of the disk. we want to keep data and metadata separated
so that reading large sequential files will not evict the directory
information from the cache causing long seeks.
for that, we tag the clusters (an 8th for metadata, and the rest
for data) and getbuf() will only evict clusters of the same tag.
doing tests taring up 9front.iso shows the following:
lowering the cluster size back to 128k avoids over half the
reads. 837888 sectors read for 512k vs. 347712 sectors with
128k cluster size.
foo.c includes bar/bar.h, which includes "baz.h"; it wants bar/baz.h
meanwhile, it also includes meh/quux.h, which includes "baz.h"; it wants meh/baz.h
Wnode gets two new counters: txcount and txerror
and actrate pointer that will be between minrate
and maxrate.
driver should use actrate instead of maxrate for
transmission when it can provide error feedback.
when a driver detects a transmission failed, it calls
wifitxfail() with the original packet. wifitxfail() then
reduces wn->actrate.
every 256th packet, we optimistically increase wn->actrate
before transmitting.
- reject files smaller or equal to two bytes, they are bogus
- fix out of bounds access in shargs() when n <= 2
- only copy the bytes read into line buffer
- use nil for pointers instead of 0
imagereclaim(), pagereclaim():
- move imagereclaim() and pagereclaim() declarations to portfns.h
- consistently use ulong type for page counts
- name number of pages to free "pages" instead of "min"
- check for pages == 0 on entry
freepages():
- move pagechaindone() call to wakeup newpage() consumers inside
palloc critical section.
putimage():
- use long type for refcount
- reduce delay for channel hop to 200ms
- use 1000ms timeout for auth response (dont hop channels while we wait)
- bunny hop sequence is mathematically prooven
addresses va's of 0 and -BY2PG cause trouble with some memmove()/memset()
implementations and possibly other code because of the nil pointer
and end pointers wrapping to zero.
unlock()/iunlock():
we need to place the coherence() *before* "l->key = 0", so that any
stores that where done while holding the lock become observable
*before* other processors see the lock released.
cas()/tas():
place memory barrier before successfull return to prevent reordering.
making sure to close the dot in every kproc appears repetitive,
so instead stop inheriting the dot in kproc() as this is usually
never what you wanted in the first place.
give kernel processes and local disk file servers (procs
having noswap flag set) a clear advantage for page allocation
under starved condition by giving them ther own wait queue so
they get readied as soon as pages become available.
check parent directory permission *after* we determined
that the new name does not exist in the parent, so that
when the new name is the same as old name then no write
permission is required in the parent directory.
instead of copying the whole packet, just save the
udp header and restore it aftwards. dont call redistrib()
when there are no forwards (this should be almost always
the case).
the code used P_Random()-P_Random() in some places which has
undefined evaluation order resulting in the wrong pseudo random
numbers being returned causing demo playback to desync.
this change adds P_Random2() function which returns the right
delta-random number and uses it in place of P_Random()-P_Random()
expression.
yoann padioleaus report on 9fans:
> I think I’ve found a bug in the network stack.
> in 9/ip/ip.h there is
> struct Ipht
> {
> Lock;
> Iphash *tab[Nipht];
> };
>
> where Night is 521,
>
> but then in 9/ip/ipaux.c there is
>
> ulong
> iphash(uchar *sa, ushort sp, uchar *da, ushort dp)
> {
> return ((sa[IPaddrlen-1]<<24) ^ (sp << 16) ^ (da[IPaddrlen-1]<<8) ^ dp ) % Nhash;
> }
>
> where Nhash is just 64,
prevent double sleep():
callers to sleep() need to be serialized as there can only
be one process sleeping at a time. plrlock and plwlock do
this.
wait for dma to complete in plwrite():
we have to wait for the dma to complete before touching
plbuf again.
maintain COPEN flag in archopen()/archclose():
when open fails because it was in use, clear the COPEN
flag, so archclose() wont screw stuff up.
try the handle buffer in reverse order looking for plan9.ini
to find plan9 partition (9fat). when that fails, we'll default
to the first handle which should be the esp.
there where two problems with blank (-b flag):
we did not update the backup header when there was already a valid
backup header in place. we always want to initialize a new backup header
in blank mode!
we now also check the backup header matches the primary (or the other
way arround depending on which header could be read), reporting any
mismatches and restoring the backup from the data of the primary.
the protective mbr needs to start at sector 1 not 0 (apparently, this
matters for ovmf).
efi systems may use traditional dos partition table
with an esp (efi system partition). otherwise, honor
the protective mbr partition (0xEE) and exit when we
encounter it.
