Co-authored-by: Victor Perevertkin <victor.perevertkin@reactos.org>
Introduce the initial changes needed to get other processors up and into kernel mode.
This only supports x86 as of now but is the first real step towards using other system processors.
The newly implemented code for registry recovery makes the FreeLdr binary to grow
in size, to the point that it would BSOD because the PE image is too big.
For now we have to temporarily disable any of the newly added code, until
either FreeLdr is split into a basic PE bootloader image itself and a
"FreeLdrlib" that is used by the PE image to access various bootloader APIs
or another proper solution is found.
Validate the SYSTEM hive with CmCheckRegistry and purge volatile data with the same function when initializing a hive descriptor for SYSTEM.
Also implement SYSTEM recovery code that takes use of SYSTEM log in case something is fishy with the hive. If hive repair doesn't have fully recovered the SYSTEM hive, FreeLdr will load the alternate variant of the SYSTEM hive, aka SYSTEM.ALT.
If FreeLdr repairs the hive with a LOG, it will mark it with HBOOT_BOOT_RECOVERED_BY_HIVE_LOG on BootRecover field of the header. All the recovered data that is present as dirty in memory will have to be flushed by the kernel once it is in charge of the system.
Otherwise if the system boot occurred by loading SYSTEM.ALT instead, FreeLdr will mark HBOOT_BOOT_RECOVERED_BY_ALTERNATE_HIVE, the kernel will start recovering the main hive as soon as it does any I/O activity into it.
These adapters were common in DEC Alpha boxes and they are really rare
nowadays. The 21140 chip is emulated in Connectix / Microsoft Virtual PC
and Hyper-V Gen 1 VM.
This is an experimental driver, not yet tested on real hardware.
CORE-8724
Co-authored-by: Stanislav Motylkov <x86corez@gmail.com>
Co-authored-by: Hermès BÉLUSCA - MAÏTO <hermes.belusca-maito@reactos.org>
- Allow to boot NT kernel on UEFI systems with our 2 primary supported architectures
- Implement remaining code needed to pass execution to x86 and amd64 kernels
CORE-11954
Adds the option to set the address edit box to use the display name or the full path. Also refreshes the window title and edit box in all open explorer windows when changing these settings using the folder options dialog.
## PROPOSED CHANGES ##
- Create a new CabinetStateSettings type that inherits from the CABINETSTATE type. This allows us to add additional cabinet state settings not exposed in the CABINETSTATE type as well as adding a Load() method to easily populate the cabinet state settings.
- Add a global cabinet state settings object. While most settings in browseui are stored independently in each shellbrowser window, cabinet state settings are global and apply to every shellbrowser window. This can be confirmed on Windows Server 2003 and Windows 7.
- When receiving the WM_SETTINGCHANGE window message from the folder options dialog, refresh the title of the window and the text in the address edit box. This is the same behavior as Windows Server 2003 and Windows 7.
Add a DWORD registry value to HKCU\...\Explorer\CabinetState\FullPathAddress to allow users to toggle this setting on or off in our folder options.
CORE-9277
Create the folder TEMP in X:\reactos so now we can match current livecd
environment variables TMP and TEMP
can be seen as a part of solving CORE-13041
The use-case for that is:
copying the livecd folder structure directly to writable media as USB sticks or memory cards,
will work then out-of-the-box without any other change.
Implement NTFS boot sector that loads FreeLdr from a NTFS partition.
CORE-17474
- Able to find/parse root directory;
- Handle fixups in FILE MFT record;
- Implement directory tree search;
- Implement loading found file from disk;
- Handle fixups in INDX records;
- Fail if compressed or sparse;
- Attempt to support 64-bit disks.
Some TO-DOs for later:
- Handle "weird" NTFS partition with uncommon sector sizes / sectors per cluster / sectors per index record;
- Better implementation for file loading;
- 64-bit LCN support.
This works similarly to how our shell stores its settings from a software design standpoint.
- Add settings.cpp file and ShellSettings structure to load and save settings.
- Add a registry value to hivedef.inf for the locked toolbar state.
This prevents a bug where the associated registry key cannot be opened or saved to.
- Add new BWM_SETTINGCHANGE window message to refresh the UI on setting changes
and send it to every open window when saving settings to the registry.
- Add new BWM_GETSETTINGSPTR window message to share the shellbrowser settings
structure pointer with child windows and toolbars.
- Set `HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\CabinetState\FullPath` to 0 by default.
Adding this registry value also enables the "Display the full path in the title bar" option in our folder options window.
- Query the same registry key when the file explorer is started to determine whether to use the full path or the display name in the window title.
CORE-19046 CORE-18904
New ReactOS can zip/unzip files and folders in UTF-8 filenames.
You can also choose the codepage of filenames to zip/unzip via
the ZipCodePage / UnZipCodePage registry values on the registry
key HKEY_CURRENT_USER\Software\ReactOS.
Windows 8 or later also support UTF-8 zipped folders.
You can also use 3rd party software to zip/unzip in older Windows.
- Use <atlconv.h> for string conversion.
- Use zipOpenNewFileInZip4_64 instead of zipOpenNewFileInZip3_64,
and then add MINIZIP_UTF8_FLAG flag.
- Set the filenames in UTF-8 by using CP_UTF8 codepage.
- Codepage is user selectable via registry settings.
CORE-16668
Enable the explorer status bar by default, which
the vast majority of our community voted for.
Set `HKCU\Software\Microsoft\Internet Explorer\Main\StatusBarOther`
to 1 in hivedef.inf. This will show the status bar by default.
CORE-19028 CORE-19010
- Add registry key to show the time and date when two lines are available
in the taskbar clock area.
- Keep old behavior when `PreferDateOverWeekday` registry key in
`HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced`
is set to 0 or not present.
When three or more lines are available, the clock will continue to show
the time, day of the week, and the date. When only one line is visible,
the clock will continue to only display the time.
CORE-19018
In both lines 451 and 474:
uefidisk.c: warning C4553: '==': result of expression not used; did you intend '='?
It's "funny" that GCC builds doesn't catch those...
Based on a commit by Vadim Galyant:
5ef5c11e7f
Also fix a minor type conversion warning. CORE-18963 CORE-17977
Co-authored-by: Vadim Galyant <vgal@rambler.ru>
CORE-17604
- Disable some functions for ARM32;
- Remove some link options not used on ARM;
- Add get _controlfp() to LIBCNTPR to link properly on ARM;
- Unify Freeldr UI Drawing on ARM;
- Add qemu UART debugging for ARM32/ARM64.
CORE-11954
- EFI binaries have a different subsystem in the PE header;
- ENVIRON: Make sure INTN and UINTN are 64bit for 64bit platforms;
- Handle UEFI Memory maps and translate it for freeldr;
- Add FAILED_TO_EXIT_BOOTSERVICES Freeldr BSoD code.
For: hivedef.inf, powercfg.cpl, sysdm.cpl
and: netshell.dll, netcfgx.dll, shell32.dll, userenv.dll
Also fix "My Documents" and "My Network Places" folder names.
First batch of changes to implement a UEFI version of freeldr:
- Compile freeldr as EFI binary on top of the existing loader.
- Stub out various functions so we can create a UEFI machine-type in freeldr.
- Implement all of the video output functions so we can display a pretty freeldr BSoD :)
- Keep the common definitions and file lists in CMakeLists.txt
- Move PC-AT & compatibles (PC-98, XBOX) definitions in pcat.cmake
- Future UEFI-specific definitions will be in an uefi.cmake
Miniport drivers import from NDIS, but NDIS does not support being
loaded as a dependent driver (it does not have DllInitialize).
Instead, NDIS needs to load before all possible miniport drivers,
even boot-start ones. We achieve this by placing it in its own service
order group, which loads before the NDIS group.
All our miniport drivers are demand-start, so would automatically start
later. The ndisprot driver from the ticket is likely the first boot-start
miniport we've encountered. Since DriverEntry did not run,
AdapterListHead was NULL, resulting in the crash.
This is what Windows does. And we forgot this location here.
This is an addendum to
0.4.15-dev-5365-g 9bb5627df6 [SETUP][INF] Use the standard "Helv" -> "MS Sans Serif" substitution... (#4864)
- Delete "DejaVu Sans Mono" font files (DejaVuSansMono.ttf etc.).
- Re-map "Terminal" font substitute to "Lucida Console" except for HebrewFonts and UnicodeFonts.
- Re-map HebrewFonts "Terminal" font substitute to "Courier New".
- Re-map UnicodeFonts "Terminal" font substitute to "Courier New". And then, re-map UnicodeFonts "Courier" font substitute to "Courier New". Delete UnicodeFonts "Courier New" font substitute.
CORE-18605
The keyboard layout file names of ReactOS are different from Windows' ones. It was one reason why ImmInstallIMEW fails.
- s/kbdbgm/kbdbu/ Bulgarian (Typewriter)
- s/kbdgrist/kbdgr1/ German_IBM
- s/kbdes/kbdsp/ Spanish (non-alternate!)
- s/kbdja/kbdjpn/ Japanese
- s/kbdko/kbdkor/ Korean
- s/kbdsk/kbdsl/ Slovak
- s/kbdsk1/kbdsl1/ Slovak (QWERTY)
CORE-11700
- Changed some wording according to the translation requirements.
- Fixed some mistakes.
- Changed my name.
Reviewed-by: He Yang <1160386205@qq.com>
Reviewed-by: Stanislav Motylkov <x86corez@gmail.com>
Restore MUP again back to its "Network" group. CORE-12107
This reverts commit 21fc538c (r75355), that reverted part of
commit e145ed06 (r72450).
In addition: noticed by Serge Gautherie (see CORE-12107):
- AudioSrv belongs to "AudioGroup" (and not "Audio" that doesn't exist).
- lanmanworkstation belongs to "NetworkProvider" (without a space).
- Fix the ErrorControl values to 1 (SERVICE_ERROR_NORMAL).
- Fix RamDisk driver type (it's SERVICE_KERNEL_DRIVER, not FS).
- btrfs.inf : This is a filesystem driver, so fix its ServiceType.
- Move 3rd-party FS data (btrfs, ext2, nfs(d)) from the system
hivesys.inf and into their dedicated **.reg.inf files.
Correct fix was to fix the HCELL_INDEX <-> HKEY conversions, much like
is being done with UlongToHandle / HandleToUlong.
The on-disk/in-memory hive file structures are platform-independent:
their layout must not depend on whether code is compiled in 32 or 64
bits.
They are correct and are more performant.
- Rewrite WinLdrAddDriverToList() on the model of CmpAddDriverToList()
with support for CmpIsDriverInList().
- Disable RegEnumKey() as it is now unused.
They date back from commit a880f2ee (r9611), and were the root cause for
the bug that was tentatively fixed by commit 81a9ce44e (PR #755).
On Windows, boot file system drivers have either the SERVICE_DEMAND_START
or the SERVICE_DISABLED start type, and only the filesystem to access the
boot media is manually loaded by the OS loader (other FSes that are needed
later are loaded by the FSRecognizer).
Also there is no need to disable NTFS anymore.
Typos introduced in commit 4d1ea554c.
These had the effect of enumerating "NetworkProviderRemoteValidation"
and "Extended BasePCI Configuration" as groups, which were of course
invalid/non-existent.
The actual groups are: "NetworkProvider", "RemoteValidation",
"Extended Base", and "PCI Configuration".
Fixing this may correct the loading order of drivers that belong to
these groups (if we do have such drivers).
Turns out, that rtl/amd64/rtlmem.S doesn't currently compile fine with
ML64, and it wasn't included for compilation anyways in the original RTL.
So, just remove it from there as well.
This allows: (i) to shorten dramatically the lengths of the static
registry path strings being used (and thus, allow for reduced binary
file size), and (ii) to prepare future support for selecting different
control sets (and related Last-Known-Good configurations).
- Use UNICODE_STRINGs wherever possible.
- Retrieve the OEMHAL font file name. TODO: Load it!
- In WinLdrLoadNLSData(), don't open/close each file twice (and showing
we are loading them twice). Instead, open all files at once (and keep
them that way), retrieve their sizes and do the calculations, then
load their respective contents one by one -- giving loading feedback
only at that point -- and finally close all of them at once.
... as it should have always been done (and must be done for NTDLL
and NTOS kernel as well). This allows using the RTL with the correct
definitions and the reduced functionality available at boot-time.
+ Make the RTL main header compatible.
In addition, this will permit re-using existing code that already
uses the RTL (mostly string conversions).
See commits 427c90af3 (r36761) and b46e8cc18 (r36980) for some
background.
Reviewed all Chinese Simplified translation files and updated those
inappropriate or outdated ones.
Co-authored-by: Liu Wenyuan <15816141883@163.com>
Reviewed-by: Chan Chilung <eason066@gmail.com>
Reviewed-by: He Yang <1160386205@qq.com>
Reviewed-by: Zheng Jianping <robsean@126.com>
Reviewed-by: Luo Yufan <njlyf2011@hotmail.com>
Reviewed-by: Hermès Bélusca-Maïto <hermes.belusca-maito@reactos.org>
Reviewed-by: Stanislav Motylkov <x86corez@gmail.com>
- Added zh-HK translation for following files:
- [BASE/SERVICES/W32TIME]
- [BASE/SYSTEM/...] (except CMD console only applications)
- [FDEBUG]
- [DLL/CPL/...] (except Wine related applications)
- [DLL/SHELLEXT/...]
- [DLL/WIN32/...] (not all applications are translated, and Wine related applications are excluded from this part)
- [MODULES/ROSAPPS/APPLICATIONS/...] (not all applications are translated)
- [SCREENSAVERS]
- [NTVDM]
- [USERSRV]
- Translation Improvement
- Fix header for zh-TW and zh-HK translation files
Reviewed-by: Luo Yufan <njlyf2011@hotmail.com>
Reviewed-by: Hermès Bélusca-Maïto <hermes.belusca-maito@reactos.org>
Reviewed-by: Stanislav Motylkov <x86corez@gmail.com>
- Move boot options parsing early on in LoadWindowsCore().
- Add WinLdrIsPaeSupported(), move in it the PAE options parsing.
The aim is to perform other tests to determine whether or not to
enable PAE, and select an adequate kernel image.
Co-authored-by: Vadim Galyant <vgal@rambler.ru>
- Fix parsing of the NOEXECUTE options, taking their precedence
into account. Most of these are also x86-specific.
This includes:
- the default TimeText;
- the default colors.
They can however be changed by the user at one's convenience, by
explicitly specifying different values.
Now, default UI colors/strings (e.g. titles/timeout text) that are
dependent of the UI "theme" (mini vs. full TUI) are set first when
calling their corresponding Initialize() function.
Then, the user UI settings are read from the user's freeldr.ini file
and override the UI theme defaults.
These settings get effectively applied at the first drawing operation
(usually the UiFadeInBackdrop() call done by the main UiInitialize()
function).
For "directui" we don't care about the settings -- they are hardcoded.
This allows not having to specify the default settings in the
freeldr.ini files anymore.
+ Add support for "None" UiBackdropFillStyle: fill with whitespace,
instead of the specific patterns.
Fixes CORE-13827, where the timer countdown would otherwise display
incorrectly if there were no trailing spaces after the timer string.
Now, the countdown is always appended with one space separator after
the end of the string, **or**, it is inserted at a specific place
delimited by a %d insertion point in the string.
Also, don't repaint the date & time (in full-UI mode) many times per
second -- instead of only once per second -- while displaying a menu.
