often, documents specify charsets but are really utf-8 encoded.
we now try to decode as utf-8 and only if that fails assume
the charset specified in the document.
the compiler used to skip zero initialization when initializer
list was given not covering unspecified elements. now we zero
all non explicitely initialized elements. for example:
typedef struct F F;
struct F
{
int a;
int b;
int c;
};
void
main(void)
{
char a[16] = { 1, 2, 3 }; /* a[3..15] initialized to zero */
F f = { .b = 1 }; /* f.a, f.c initialized to zero */
}
the emited code that initializes local variables did not handle
unaligned data causing stack corruption, affecting code like:
void main(void)
{
char a[9] = {0};
}
this change will emit code that does byte stores for the unaligned
bytes and also handles small objects (<= 16 bytes) without branches.
using /proc/$pid/mem to access vga bios is not portable and crashes
sgi machines when aux/vga is run. instead, try /dev/realmodemem
first (provided by realemu), then #v/vgabios.
this allows extracting tar archives that use longnames extension,
where the real filename is stored in a special entry with
linkflag == 'L' before the file entry. also skip longlink entries
with linkflag == 'K'.
i made a mistake here as this change breaks the arm and mips compilers
which lack an optimiation in xcom() that folds constant pointer arithmetic
into the offset. on arm, the a node is a complex expression with op OADD of
type TIND but the test rejected the (valid) pointer arithmetic.
instead, we now test for the operations which cannot be constant instead
of using the type as a proxy.
mischief spotted that the only way for listeners to go away was
truncating (but not removing) a service script. this is wrong and
not as described in the manpage.
this change makes removing (or truncating) a listen script stop
the listener.
scandir() first marks all current announces, then reads the service
directory adding announces which will clear the marks for the ones
already there or add a new unmarked one. finally, we shoot down and
remove all still marked announces.
6c changed "- cmd_lagest_size + 1" into a *unsigned* 32bit constant. which
got added to 64bit pointer making pcb->limit > pcb->end resulting
in errors for partial commands in the buffer. removing the parentesis
propagates the operation to 64bit.
when we get an i/o error, always call hdrecover() which
will reset the port and reinitialize the interface of
the calling processes endpoint.
handle the case when we have multi-function device with
multiple reader procs in hdrecover(). the sequence is
as follows:
1) any of the reader procs encounters i/o error and calls hdrecover(),
acquires qlock and initiates port reset.
2) any other readerprocs will now encounter i/o error (due to reset) and also call
hdrecover() but will be waiting on the qlock for reset to complete.
3) first process completes reset and reinitializes its interface with setproto()
and then releases the qlock for the other readers todo the same.
fixes bug with libmemdraw where the linker would hoist
the final ADD $const, SP at the end over loads from the
stack causing the front to fall off once a interrupt hits.
from the unicode-db patch readme:
command() receives a char* that is assigned to lp, which is a Rune*,
and lp is incremented later in readchar(), so each read consumed 4 bytes.
The only time command() is called is in runpcs() with bkpt->comm,
which is a char* built in subpcs through a char*, so the string stored in
bkpt->comm was not a Rune string. A way to test the bug is:
db program
main:b argv/X
:r
the special sencodefmt() in ndb/dn.c is only used with %H format for
hexadecimal printing for binary strings. removing the unused
calls to enc32() and enc64() reduces the code size by arround 4K.
(this is usefull for ndb/getip which gets linked into the kernel).
the approximation of n*2 to calculate the number of output bytes
for enc64() fails for inputs of size < 3. this is fixed by using
encodefmt() which gets the calculation right and also simplifies
the code avoiding the allocation and freeing of intermediate string
buffers.
convert:
x = B || W
MOVxLZX a, r; MOVxQZX r, b -> MOVxQZX a, r; MOVQ r, b
MOVxLSX a, r; MOVxQSX r, r -> MOVxQSX a, r; MOVQ r, r
the MOVQ can then be eleminated by copy propagation.
improve subprop() by accepting other mov and lea
instructions as the source op.
tlsServer() closes the passed in fd, in our case fd=1 leaving it
with no std output which got occupied by pipe() filedescriptor
which it then closed after duping... a classic.
delete all this mess. theres no reason to fork() and copy traffic
on a pipe at all as tlsServer() gives us a perfectly valid filedescriptor.
just dup() and exec() and we'r done.
the imported wc from sources is arround 8 times slower
than our old one. it is common to run wc on large log files
to count lines. so i think the implementation complexity
is justified. (just like with grep)
vbs/vbe members in Mode was only used in the vesadb
and cannot be changed from vgadb.
use shs/ehs in drivers when refering to the horizontal
sync pulse. clarify the matter in a comment.
link detailed timing modes at the head of the edid
modelist. these are the modes we'r interested in,
not the ones from vesadb.
igfx and vesa can determine monitor timing information from ddc
and store the edid info for connected monitors in vga->edid[].
when monitor type cannot be found in vgadb, we consult the edid
information and make a mode based on the edid info.
this avoids having to maintain a vgadb entry for each monitor.
monitor can be set to "[width]x[height]@[freq]Hz" for a specific
edid setting. when not found, a mode is searched based on the
size.
so the following should work:
aux/vga -m 1366x768@60Hz -l 1366x768x32
aux/vga -m auto -l 1366x768x32
dbvesamode() modified the passed in size string in the process
of option parsing. this is a no-go because the string might be
constant in the read only section. provide cracksize() function
for the parsing and make a static copy.
do the vendor specific monitor detection in vbesnarf() instead
of vbecheck(). vbecheck()'s purpose is to check if vesa bios
service is avialable, not snarf graphics card state.
nvidiascale() was a no-op because it missed the vbecall() at
the end of the function. this means it was never tested so i
add the missing vbecall(), but disable nvidiascale for now
until someone tests this.
keep fancy stuff out of the Vbe structure. it is just there for
making bios calls, not keep state about the graphics card.
this adds support for eap-peap/mschapv2 and eap-ttls/pap.
code has only been tested with freeradius and a cheap
access point, not tested with actual eduroam network.
this is used for wpa2 enterprise peap/mschapv2. server role
is not implemented as that would require changing the
wire format on the auth server.
the naming is unfortunate as we already have proto=mschap2 which
really refers to ntlmv2.
program secret plane size and position registers described as "reserved"
in g45_vol_3_register_0_0.pdf that was found by inspecting vesa bios
port traces.
also, we have to set 18:19 (Cursor/Dispaly/Overlay Planes Off) in
PIPExCONF while programming the planes on this card. this is what
vesa bios does on modeset.
avoid sync the jar file when fids get clunked.
the only reason to sync the jar on clunk is when it has
been marked dirty (cookies added or deleted) and we
want to flush the changes to disk.
- rewrite when jar->dirty != 0 (caller modified the in memory jar)
- reread when the jar->qid != stat(jar->file)->qid (on disk file changed)
- ignore deleted cookies in cookiesearch()
initially, pio was used to access registers so i didnt need
a kernel driver for initial testing.
pio does not work under efi, so use mmio to access registers.
Prior to switching display, switch to text mode 3, which
is supported by anything, then set display, search for the
desired mode, load it if found. If not found, set the display
to the old one and switch to the old mode back.
the utf8 buffers b1 where allocated from fbufalloc() which gives
us BUFSIZE bytes, but Xfid->count can be bigger than that. so just
emalloc() the requested number of bytes.
when converting from Runes to utf-8, we have to account for the
terminating '\0' byte snprint() places, so fix the maxrune number
calculation instead of using BUFSIZE+1 as buffer size.
A buffer can be overflowed in the init function of kbmap.c by using a filename of more than 112 characters.
sample output:
% cd /sys/lib/kbmap
% touch aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
% kbmap
kbmap 1974: suicide: sys: trap: fault write addr=0xa6a96510 pc=0x000011df
offending code is most likely the call to sprint in the init function of /sys/src/cmd/kbmap.c,
which in this case writes /sys/lib/kbmap/$file to a 128-bit buffer.
I'm willing to submit a patch for this myself along with a few minor improvements/fixes to kbmap
if I can figure out the nuances of doing so.
--silasm
continue recursing when we get empty but non-negative answer
from a (claimed) authoritative nameserer that provides more
nameservers.
this fixes wordpress dns:
63766.3: sending to 192.0.80.93/ns1.wordpress.com bossypally.files.wordpress.com ip
63766: rcvd OK from 192.0.80.93 (authoritative)
Q: bossypally.files.wordpress.com ip
Auth: files.wordpress.com 5 min ns mdns1.wordpress.com
files.wordpress.com 5 min ns mdns2.wordpress.com
files.wordpress.com 5 min ns mdns3.wordpress.com
files.wordpress.com 5 min ns mdns4.wordpress.com
files.wordpress.com 5 min ns mdns5.wordpress.com
Hint: mdns1.wordpress.com 4 hr ip 192.0.75.7
mdns2.wordpress.com 4 hr ip 198.181.117.7
mdns3.wordpress.com 4 hr ip 198.181.116.7
mdns4.wordpress.com 4 hr ip 198.181.118.7
mdns5.wordpress.com 4 hr ip 192.0.74.7
63766.4: sending to 192.0.75.7/mdns1.wordpress.com bossypally.files.wordpress.com ip
63766: rcvd OK from 192.0.75.7 (authoritative)
Q: bossypally.files.wordpress.com ip
Ans: bossypally.files.wordpress.com 5 min ip 192.0.72.2
bossypally.files.wordpress.com 5 min ip 192.0.72.3
----------------------------
answer bossypally.files.wordpress.com 5 min ip 192.0.72.2
answer bossypally.files.wordpress.com 5 min ip 192.0.72.3
----------------------------
note the authoritative flag in the first response from ns1.wordpress.com that
would otherwise terminate the search.
sed just continued writing past genbuf when it should stop
with "Output line too long".
quit when we get unspecified options.
stupid casts from long to char* for no reason.
some 0 vs nil cleanup.
we can improve performance alot by using webfs which
does http keep alives for us, so connection setup
overhead is eleminated.
fix 9p flushes and double frees.
werrstr() takes a format string as its first argument.
a common error is to pass user controlled string buffers
into werrstr() that might contain format string escapes
causing werrstr() to take bogus arguments from the stack
and crash.
so instead of doing:
werrstr(buf);
we want todo:
werrstr("%s", buf);
or if we have a local ERRMAX sized buffer that we can override:
errstr(buf, sizeof buf);
bug: as jpm pointed out, when we run aux/wpa in rio window
and delete the window, aux/wpa was killed as it shared the
note group of the window.
fix: fork the notegroup.
to get the right data size of a file, the revlog needs to have been
opened and the metaheader parsed. as an optimization, we used to
open revlog only on the first read resulting revlogs with metaheaders
having the wrong size returned by fstat() until the first read().
tar relies on fstat() giving the correct file size, so just open
the revlog on open. reading directories can still yield the wrong
size but it is not that critical.
we used to set RD flag in requests unconditionally, which
is fine by the standard but some dns server administrators
seem to use it as a denial of service indicator (for ther
non recursive authoritative nameservers) and ignore the
request.
so only set the RD flag when talking to local dns servers.
the syscall stubs (for amd64) currently have a unconditional
spill of the first (register) argument to the stack.
sysr1 (and _nsec) are exceptional in that they do not
take any arguments, so the stub is writing unconditionally
to ther first argument slot on the stack.
i could avoid emiting the spill in the syscall stubs for
sysr1 but that would also break truss which assumes fixed
instruction sequence from stub start to the syscall number.
i'm not going to complicate the syscall stubs just for
sysr1 (_nsec is not used in 9front), but just add a dummy
argument to sysr1 definition that can receive the bogus
argument spill.
the numbers from /dev/sysstat overflow on 32bit, so have
to do subtraction modulo 2^32 as we calculate with 64bit
integers.
thanks mischief for reporting this.
this is a work in progress implementation of the ayiya (anything
in anything) protocol as used by sixxs.net. hiro tested it and it
worked for him, but progress has stalled as sixxs.net rejected my
request for an account and ignored my emails since.
