sending multicast was broken when ipconfig assigned the 0
address for dhcp as they would wrongly classified as Runi.
this could happen when we do slaac and dhcp in parallel,
breaking the sending of router solicitations.
now handle the supported rates element properly, only
providing the intersecting set of rates that the bss
advertises and what the driver supports, putting the
basic rates first.
also avoid using usupported rates.
BurnZeZ → Found a bug in dc(1)
BurnZeZ → Everything breaks when you fill the stack
BurnZeZ → You have stkptr which crap expects to point to an available member in Blk *stack[STKSZ];
BurnZeZ → stkend = &stack[STKSZ];
BurnZeZ → stkptr is allowed to equal stkend
BurnZeZ → So crap that expects stkptr to be pointing to an available Blk ends up dereferencing past the end of the array
BurnZeZ → term% echo `{seq 1 100} f | dc
BurnZeZ → dc 628283: suicide: sys: trap: fault read addr=0xffffe0000040a618 pc=0x204b1c
nobody passes us the "RSD PTR " address when doing multiboot/kexec
on UEFI systems. so we search for it manually in the ACPI reserved
area as indicated in the e820 memory map.
launch wadfs after detecting main wad, exposing GENMIDI and music lumps
under /mnt/wad. /bin/dmus can then use them directly, and wadfs doesn't
need to be started manually.
"I sometimes find myself on either slow or data-capped network links where downloading images isn't ideal. Attached is a simple patch to mothra that changes the 'k' command to not only remove already-downloaded images from a page, but also toggle a state such that mothra won't attempt to download images on future visited sites until 'k' is toggled again. This also adds a '-k' flag to mothra which enables the flag at startup." --Jeremy O'Brien<neutral@fastmail.com> on 9fans
the target has to be encoded as a domain name (the individual
name components as separate labels followed by . (empty) label),
not as a literal string.
to disable compression, pass nil dictionary to pname().
- fix overwriting channel 10 with channel 9
- fix using channel volume instead of last volume when setting note
(fixes d_doom and others)
- remove useless state
we did not apply the special case to store 0xFFFF (-0)
in the checksum field when the checksum calculation
returned zero. we survived this for v4 as RFC768 states:
> If the computed checksum is zero, it is transmitted as
> all ones (the equivalent in one's complement arithmetic).
>
> An all zero transmitted checksum value means that the
> transmitter generated no checksum (for debuging or for
> higher level protocols that don't care).
for ipv6 however, the checksum is not optional and receivers
would drop packets with a zero checksum.
during dhcp, ipconfig assigns the null address :: which makes
ipforme() return Runi for any destination, which can trigger
arp resolution when we attempt to reply. so have v4local()
skip the null address and have sendarp() check the return
status of v4local(), avoing the spurious arp requests.
closeconv() calls ipifcremmulti() like:
while((mp = cv->multi) != nil)
ipifcremmulti(cv, mp->ma, mp->ia);
so we have to defer freeing the entry after doing:
if((lifc = iplocalonifc(ifc, ia)) != nil)
remselfcache(f, ifc, lifc, ma);
which accesses the otherwise free'd ia and ma arguments.
on HZ 100 systems like pc and pc64, the minium sleep time
was 10ms, which is quite high. the cap isnt really needed
as arch specific timerset() enforces its own limit, but on
a higher resolution.
background:
from Charles Forsyth:
I haven't really got an opinion on it. The 10ms interval was first used on
machines that were much slower.
I thought someone did set HZ to a bigger value, partly to support better
in-kernel timing. I haven't done it because I never had a need for it.
If I were doing (say) protocol implementation in user mode, I'd certainly
reconsider. Sleep itself forces at best ms granularity,
and for some applications that's too big.
initial mail from qwx raising the issue:
> Hello,
>
> I found out recently that sleep(2)'s resolution on 386 and 9front's amd64
> kernel is 10 ms rather than 1 ms. The reason is that on those kernels,
> HZ is set to 100 rather than say 1000. In syssleep, we get 1 tich every
> 10 ms.
>
> What is unclear is why.
>
> To paraphrase cinap_lenrek's answer to my question:
>
> In syssleep:
> if(ms < TK2MS(1))
> ms = TK2MS(1);
> tsleep(&up->sleep, return0, 0, ms);
>
> "TK2MS(1)" can be replaced with just "1", and the arch specific
> timerset() routine would do its own capping of the period if it's too
> small for the timer resolution, and make better decisions based on what
> the minimum timer period should be given the latency overhead of the
> given arch's interrupt handling and performance characteristics.
>
> Alternatively, HZ could be raised to 500 or 1000.
>
> It seems it's just trying to prevent excessive context switches and
> interrupts, but it seems somewhat arbitrary. A ton of syscalls can be
> done in 1 ms, and it's the lowest we can go without changing the unit.
>
>
> What do you think?
>
> Thanks in advance,
>
> qwx
devdir internally replicates the qid in ther perm stat field
already and the practice of explicitely passing just causing
confusion when done inconsistently.
avoid returning ip addresses that cannot be reached due
to lack of a compatible ip address. this means when here
is no ipv4 address configured, we wont return ipv4 addresses
and would not query dns for an A record.
likewise, when here is no ipv6 address configured then
we wont query dns for an AAAA record.
ipv6 lookups can still be disabled with the -4 flag just
as before.
this makes virtual "memdisk" from SYSLINUX accessible to
the kernel, allowing the iso to be loaded via TFTP and
started without any ethernet or disk drivers available.
this driver makes regions of physical memory accessible as a disk.
to use it, ramdiskinit() has to be called before confinit(), so
that conf.mem[] banks can be reserved. currently, only pc and pc64
kernel use it, but otherwise the implementation is portable.
ramdisks are not zeroed when allocated, so that the contents are
preserved across warm reboots.
to not waste memory, physical segments do not allocate Page structures
or populate the segment pte's anymore. theres also a new SG_CHACHED
attribute.
fpurestore() unconditionally changed fpstate to FPinactive when
the kernel used the FPU. but in the FPinit case, the registers are
not saved by mathemu(), resulting in all zero initialized registers
being loaded once userspace uses the FPU so the process would have
wrong MXCR value.
the index overflow check was wrong with using shifted value.
due to linux omiting the final Z(4) in the NTLMv2 reply, and
the need for the windom for LMv2 authentication, here is a new
AuthNTLM ticket request now with length and dom fields.
in ntlmv2, the client will retry the challenge response trying a bunch
of different domain names assuming the same server challenge. so we have
to make retries work with factotum and the auth server.
also, windows 7 with compatlevel=4 sends all zeros LM response.
the dnsquery() library function should not start mouting /srv/dns on
its own. this problem arrises only for ndb/cs as it is started before
ndb/dns.
the issue with mounting /srv/dns before /net is when ndb/cs attempts
to read the list of interfaces, accessing /net/ipifc, which triggers
a rpc to ndb/dns as it is ontop of the mount. this can yield a deadlock
when ndb/dns blocks its 9p loop waiting for requests to complete on
a refresh and the requests are stuck waiting for ndb/cs to translate
a dial string for announce().