plan9fox/sys/src/9/imx8/reform

dev
	root
	cons
	swap
	env
	pipe
	proc
	mnt
	srv
	shr
	dup
	tls
	cap
	fs
	ether	netif
	bridge	log
	ip	arp chandial ip ipv6 ipaux iproute netlog nullmedium pktmedium inferno
	draw	screen swcursor
	mouse	screen swcursor
	uart
	usb
	i2c
	rtc	devi2c
	sd

link
	usbxhciimx
	etherimx	ethermii
	ethermedium
	loopbackmedium
	netdevmedium
	i2cimx		devi2c
	pciimx		pci

ip
	tcp
	udp
	il
	ipifc
	icmp
	icmp6
	ipmux
misc
	ccm
	gic
	gpc
	gpio
	lcd
	uartimx
	iomux
	sdmmc	usdhc
	sdnvme	pci
port
	int cpuserver = 0;
bootdir
	/$objtype/bin/paqfs
	/$objtype/bin/auth/factotum
	bootfs.paq
	boot
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm 2022-05-08 16:50:29 +00:00			`dev`
			`root`
			`cons`
			`swap`
			`env`
			`pipe`
			`proc`
			`mnt`
			`srv`
			`shr`
			`dup`
			`tls`
			`cap`
			`fs`
			`ether netif`
kernel: consistently add devbridge and netdevmedium to kernel configs 2022-07-18 17:19:57 +00:00			`bridge log`
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm 2022-05-08 16:50:29 +00:00			`ip arp chandial ip ipv6 ipaux iproute netlog nullmedium pktmedium inferno`
imx8: mainscreen turn on! supports the lcd panel and adds alot of infrastructure like for the ccm clock module and the i2c controllers. 2022-06-11 21:12:04 +00:00			`draw screen swcursor`
			`mouse screen swcursor`
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm 2022-05-08 16:50:29 +00:00			`uart`
imx8: add xhci driver for the soc This is mostly a copy of port/usbxhci.c with PCIWADDR() replaced by PADDR() and the pci specific code stripped out. This could be refactored at a later time. There is a gpio line for the main hub reset that needs to be asserted and some power management functions that are currently done by u-boot (using "usb start" command). We will do these ourselfs once we have the infrastructure for it in place. 2022-05-15 11:57:52 +00:00			`usb`
imx8: mainscreen turn on! supports the lcd panel and adds alot of infrastructure like for the ccm clock module and the i2c controllers. 2022-06-11 21:12:04 +00:00			`i2c`
imx8: add simple i2c rtc driver for NXP PCF8523 datasheet: http://nxp.com/docs/en/data-sheet/PCF8523.pdf 2022-07-20 18:49:28 +00:00			`rtc devi2c`
imx8: port usdhc driver (from bcm/sdhc) for external sdcard this is a total hack, only works up to 25MHz for now. 2022-06-14 23:53:03 +00:00			`sd`
imx8: add xhci driver for the soc This is mostly a copy of port/usbxhci.c with PCIWADDR() replaced by PADDR() and the pci specific code stripped out. This could be refactored at a later time. There is a gpio line for the main hub reset that needs to be asserted and some power management functions that are currently done by u-boot (using "usb start" command). We will do these ourselfs once we have the infrastructure for it in place. 2022-05-15 11:57:52 +00:00
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm 2022-05-08 16:50:29 +00:00			`link`
imx8: add xhci driver for the soc This is mostly a copy of port/usbxhci.c with PCIWADDR() replaced by PADDR() and the pci specific code stripped out. This could be refactored at a later time. There is a gpio line for the main hub reset that needs to be asserted and some power management functions that are currently done by u-boot (using "usb start" command). We will do these ourselfs once we have the infrastructure for it in place. 2022-05-15 11:57:52 +00:00			`usbxhciimx`
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm 2022-05-08 16:50:29 +00:00			`etherimx ethermii`
			`ethermedium`
			`loopbackmedium`
kernel: consistently add devbridge and netdevmedium to kernel configs 2022-07-18 17:19:57 +00:00			`netdevmedium`
imx8: mainscreen turn on! supports the lcd panel and adds alot of infrastructure like for the ccm clock module and the i2c controllers. 2022-06-11 21:12:04 +00:00			`i2cimx devi2c`
imx8: pcie and nvme support 2022-07-03 11:36:50 +00:00			`pciimx pci`
kernel: consistently add devbridge and netdevmedium to kernel configs 2022-07-18 17:19:57 +00:00
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm 2022-05-08 16:50:29 +00:00			`ip`
			`tcp`
			`udp`
			`il`
			`ipifc`
			`icmp`
			`icmp6`
			`ipmux`
			`misc`
imx8: mainscreen turn on! supports the lcd panel and adds alot of infrastructure like for the ccm clock module and the i2c controllers. 2022-06-11 21:12:04 +00:00			`ccm`
imx8: port usdhc driver (from bcm/sdhc) for external sdcard this is a total hack, only works up to 25MHz for now. 2022-06-14 23:53:03 +00:00			`gic`
imx8: make gpc functionality available with a powerup() function 2022-06-12 21:16:47 +00:00			`gpc`
imx8: add gpio helper gpioout()/gpioin() 2022-06-13 23:00:06 +00:00			`gpio`
imx8: mainscreen turn on! supports the lcd panel and adds alot of infrastructure like for the ccm clock module and the i2c controllers. 2022-06-11 21:12:04 +00:00			`lcd`
imx8: port usdhc driver (from bcm/sdhc) for external sdcard this is a total hack, only works up to 25MHz for now. 2022-06-14 23:53:03 +00:00			`uartimx`
imx8: add iomuxpad() helper for pad and mux control 2022-06-13 19:06:00 +00:00			`iomux`
imx8: port usdhc driver (from bcm/sdhc) for external sdcard this is a total hack, only works up to 25MHz for now. 2022-06-14 23:53:03 +00:00			`sdmmc usdhc`
imx8: pcie and nvme support 2022-07-03 11:36:50 +00:00			`sdnvme pci`
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm 2022-05-08 16:50:29 +00:00			`port`
			`int cpuserver = 0;`
			`bootdir`
			`/$objtype/bin/paqfs`
			`/$objtype/bin/auth/factotum`
			`bootfs.paq`
			`boot`