plan9fox/sys/src/9/imx8/reform

dev
	root
	cons
	swap
	env
	pipe
	proc
	mnt
	srv
	shr
	dup
	tls
	cap
	fs
	ether	netif
	ip	arp chandial ip ipv6 ipaux iproute netlog nullmedium pktmedium inferno
	uart
	usb

link
	usbxhciimx
	etherimx	ethermii
	ethermedium
	loopbackmedium
ip
	tcp
	udp
	il
	ipifc
	icmp
	icmp6
	ipmux
misc
	gic
	uartimx
port
	int cpuserver = 0;
bootdir
	/$objtype/bin/paqfs
	/$objtype/bin/auth/factotum
	bootfs.paq
	boot
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm 2022-05-08 16:50:29 +00:00			`dev`
			`root`
			`cons`
			`swap`
			`env`
			`pipe`
			`proc`
			`mnt`
			`srv`
			`shr`
			`dup`
			`tls`
			`cap`
			`fs`
			`ether netif`
			`ip arp chandial ip ipv6 ipaux iproute netlog nullmedium pktmedium inferno`
			`uart`
imx8: add xhci driver for the soc This is mostly a copy of port/usbxhci.c with PCIWADDR() replaced by PADDR() and the pci specific code stripped out. This could be refactored at a later time. There is a gpio line for the main hub reset that needs to be asserted and some power management functions that are currently done by u-boot (using "usb start" command). We will do these ourselfs once we have the infrastructure for it in place. 2022-05-15 11:57:52 +00:00			`usb`

imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm 2022-05-08 16:50:29 +00:00			`link`
imx8: add xhci driver for the soc This is mostly a copy of port/usbxhci.c with PCIWADDR() replaced by PADDR() and the pci specific code stripped out. This could be refactored at a later time. There is a gpio line for the main hub reset that needs to be asserted and some power management functions that are currently done by u-boot (using "usb start" command). We will do these ourselfs once we have the infrastructure for it in place. 2022-05-15 11:57:52 +00:00			`usbxhciimx`
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm 2022-05-08 16:50:29 +00:00			`etherimx ethermii`
			`ethermedium`
			`loopbackmedium`
			`ip`
			`tcp`
			`udp`
			`il`
			`ipifc`
			`icmp`
			`icmp6`
			`ipmux`
			`misc`
			`gic`
			`uartimx`
			`port`
			`int cpuserver = 0;`
			`bootdir`
			`/$objtype/bin/paqfs`
			`/$objtype/bin/auth/factotum`
			`bootfs.paq`
			`boot`