xfnw/plan9fox
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity
plan9fox/sys/src/9/imx8/reform

50 lines
483 B
Plaintext
Raw Normal View History

imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm
2022-05-08 16:50:29 +00:00
dev
root
cons
swap
env
pipe
proc
mnt
srv
shr
dup
tls
cap
fs
ether netif
ip arp chandial ip ipv6 ipaux iproute netlog nullmedium pktmedium inferno
imx8: mainscreen turn on! supports the lcd panel and adds alot of infrastructure like for the ccm clock module and the i2c controllers.
2022-06-11 21:12:04 +00:00
draw screen swcursor
mouse screen swcursor
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm
2022-05-08 16:50:29 +00:00
uart
imx8: add xhci driver for the soc This is mostly a copy of port/usbxhci.c with PCIWADDR() replaced by PADDR() and the pci specific code stripped out. This could be refactored at a later time. There is a gpio line for the main hub reset that needs to be asserted and some power management functions that are currently done by u-boot (using "usb start" command). We will do these ourselfs once we have the infrastructure for it in place.
2022-05-15 11:57:52 +00:00
usb
imx8: mainscreen turn on! supports the lcd panel and adds alot of infrastructure like for the ccm clock module and the i2c controllers.
2022-06-11 21:12:04 +00:00
i2c
imx8: add xhci driver for the soc This is mostly a copy of port/usbxhci.c with PCIWADDR() replaced by PADDR() and the pci specific code stripped out. This could be refactored at a later time. There is a gpio line for the main hub reset that needs to be asserted and some power management functions that are currently done by u-boot (using "usb start" command). We will do these ourselfs once we have the infrastructure for it in place.
2022-05-15 11:57:52 +00:00
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm
2022-05-08 16:50:29 +00:00
link
imx8: add xhci driver for the soc This is mostly a copy of port/usbxhci.c with PCIWADDR() replaced by PADDR() and the pci specific code stripped out. This could be refactored at a later time. There is a gpio line for the main hub reset that needs to be asserted and some power management functions that are currently done by u-boot (using "usb start" command). We will do these ourselfs once we have the infrastructure for it in place.
2022-05-15 11:57:52 +00:00
usbxhciimx
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm
2022-05-08 16:50:29 +00:00
etherimx ethermii
ethermedium
loopbackmedium
imx8: mainscreen turn on! supports the lcd panel and adds alot of infrastructure like for the ccm clock module and the i2c controllers.
2022-06-11 21:12:04 +00:00
i2cimx devi2c
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm
2022-05-08 16:50:29 +00:00
ip
tcp
udp
il
ipifc
icmp
icmp6
ipmux
misc
imx8: mainscreen turn on! supports the lcd panel and adds alot of infrastructure like for the ccm clock module and the i2c controllers.
2022-06-11 21:12:04 +00:00
ccm
imx8: make gpc functionality available with a powerup() function
2022-06-12 21:16:47 +00:00
gpc
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm
2022-05-08 16:50:29 +00:00
gic
uartimx
imx8: mainscreen turn on! supports the lcd panel and adds alot of infrastructure like for the ccm clock module and the i2c controllers.
2022-06-11 21:12:04 +00:00
lcd
imx8: add work in progress i.MX8MQ kernel for the mntreform2 laptop This is a work in progress port to the mntreform2 laptop. Working so far: - mmu (same as raspberry pi 3b+) - arm generic timer - gicv3 - uart1 - enet With access to the uart, one can netboot this kernel in u-boot using the following commands: > dhcp > bootm
2022-05-08 16:50:29 +00:00
port
int cpuserver = 0;
bootdir
/$objtype/bin/paqfs
/$objtype/bin/auth/factotum
bootfs.paq
boot
Reference in a new issue Copy permalink