- allow for external command to be run to install a challenge using -e flag
- remove the challengedom argument, it is given by the subject in the csr
- fix some filedescriptor leaks in error paths
In a few places, we where using a fixed buffer of sizeof(Dir)+100
size for stat. This is not correct and fails if the name returned
in stat is long.
This results in being unable to seek to the end of file with a
long filename.
The kernel should do the same thing as dirfstat() from libc;
handling the conversion and buffer allocation and returning a
freeable Dir* pointer.
For this, a new dirchanstat() function was added.
The fstat syscall was not rewriting the name to the last path
element; fix it.
In addition, gracefully handle the mountfix case, reallocating
the buffer to accomidate the required stat length plus
size of the new name so dirsetname() does not fail.
this patch fixes bugs in tls extension handling:
1. if conn->serverName is an empty string, tlsClientExtensions
will generate a SNI with an empty hostname, which is forbidden
according to RFC 6066:
opaque HostName<1..2^16-1>;
check if conn->serverName has at least one char.
2. checkClientExtensions fail with clients that doesn't have
extensions, because it doesn't check if ext is nil. fix that
up.
3. rewrite checkClientExtensions. some parts of the code does
not check the length properly, and it could be simplified
heavily.
The standard states in section 19.5.93:
.... Notice that if this operation is performed
on an obeject reference such as one produced by
the Alias, Index, or RefOf statements, the obect
type of the base object is returned.
Do the debuglevel check before calling the print
function for _threaddebug, by making it a macro.
Do not waste cycles passing arguments.
Generalize the _threaddebug function into _threadprint()
and add a varargcheck pragma. This function can
also be used from _threadassert().
Fix missing arguments in one case, fix trailing
newlines in _threaddebug().
Make _threadgetproc()/_threadsetproc() a macro,
just dereferencing Proc**_threadprocp.
Simplify the mainjump, just call _threadsetproc()
directly without that mainp dance. Remove the
_schedinit() argument, it uses _threadgetproc() now.
Get rid of Mainarg struct, just have a global variable
for argc.
The timing loop is here for the case if the
controller doesnt produce an interrupt when
becoming broken. In normal case, we should
just get worken up from the interrupt.
In any case, 100 times a second polling is
not neccessary here, increase to 1 second.
The old strategy of wait and retry doesnt seem to
work very well as it keeps all the forking parents
stuck waiting in the kernel worsening the situation.
The idea with this change is to have rfork() return
error quickly; and without whining; as most callers
would just react with a sysfatal() which might be
better for surviving this.
It is a bit of a annoyance that kenc will try to expand
function like macros on any symbol with the same name
and then complain when it doesnt see the '(' in the
invocation.
test case below:
void
foo(int)
{
}
struct Bar
{
int baz; /* <- should not conflict */
};
void
main(void)
{
baz(123);
}
The current behaviour of the kernel to deadlock itself
instead of returning an error on fork.
This might change in the future, so prepare libthread
to handle this case.
For _schedfork(), we'r going to just retry forking
on every switch, while for _schedexec(), the exec
will fail and send ~0 down the pid channel.
The ipoput4() and ipoput6() functions can raise an error(),
which means before calling sndrst() or limbo() (from tcpiput()),
we have to get rid of our blist by calling freeblist(bp).
Makse sure to set the Block pointer to nil after freeing in
ipiput() to avoid accidents.
Fix wrong panic string in sndsynack, and make any sending
functions like sndrst(), sndsynack() and tcpsendka()
return the value of ipoput*(), so we can distinguish
"no route" error.
Add a Enoroute[] string constant.
Both htontcp4() and htontcp6() can never return nil,
as they will allocate new or resize the existing block.
Remove the misleading error handling code that assumes
that it can fail.
Unlock proto on error in limborexmit() which can
be raised from sndsynack() -> ipoput*() -> error().
Make sndsynack() pass a Routehint pointer to ipoput*()
as it already did the route lookup, so we dont have todo
it twice.
i'm not confident about mutating the route tree
pointers and have concurrent readers walking the
pointer chains.
given that most route lookups are bypassed now
for non-routing case and we are not building a
high performance router here, lets play it safe.
theres no structure in the lower 32 bits of an ipv6 address.
use the top bit to distinguish special stuff like multicast
and link-local addresses, and use the 16-bit subnet-id bits
for the rest.
Instead of having to do an arp hash table lookup for each
outgoing ip packet, forward the Routehint pointer to the
medium's bwrite() function and let it cache the arp entry
pointer.
This avoids route and arp hash table lookups for tcp, il
and connection oriented udp.
It also allows us to avoid multiple route and arp table
lookups for the retransmits once an arp/neighbour solicitation
response arrives.
The Mhead structures have two sources of references to them:
- from Pgrp.mnthash hash-table
- from a channels Chan.umh pointer as returned by namec() for a union directory
Unless one holds the Mhead.lock RWLock, the Mhead.mount chain
can be mutated by eigther cmount(), cunmount() or closepgrp().
Readers, skipping acquiering the lock where:
mountfix(): responsible for rewriting directory entries for
union directory reads; was walking the Mhead.mount chain to
detect if the passed channel itself appears in the mount list.
cmount(): had a check and copy when "new" chan was a union itself
and if the MCREATE flag is set and would copy the mount table.
All this needs to be done with Mhead read-locked while copying
the mount entries.
devproc(): in the handler for reading /proc/n/ns file.
namec(): while checking if the Chan->umh should be initialized.
In addition to this, cmount() is changed to do the mountfree()
of the original mount chain when MREPL is done after releasing
the locks.
Also, some cosmetic changes...
The IPv4 ARP cache used to indefinitely buffer packets in the Arpent hold list.
This is bad in case of a router, because it opens a 1 second
(retransmit time) window to leak all the to be forwarded packets.
This change makes the ipv4 arp code path similar to the IPv6 neighbour
solicitation path, using the retransmit process to time out old entries
(after 3 arp retransmits => 3 seconds).
A new function arpcontinue() has been added that unifies the point when
we schedule the (ipv6 sol retransmit) / (ipv4 arp timeout) and reduce
the hold queue to the last packet and unlock the cache.
As a bonus, we also now send a icmp host unreachable notification
for the dropped packets.
tlsbwrite() would call checkstate() before calling tlsrecwrite()
to make sure the channel is open. however, because checkstate()
only raises the error, the Block* passed wont be freed and
would result in a memory leak.
move the checkstate() call inside tlsrecwrite() to reuse the
error handling that frees the block on error.
in OpenBSD 6.9 and up, the kernel (bsd, bsd.mp) still has
the ostype symbols, but bsd.rd appears to have lost them,
even when decompressed.
so, as a result, we should use what we have, which isn't
much.
Due to the way LCA is defined, a using a strict LCA
on a graph like this:
<--a--b--c--d--e--f--g
\ /
+-----h-------
can lead to spurious requests to merge. This happens
because 'lca(b, g)' would return 'a', since it can be
reached in one step from 'b', and 2 steps from 'g', while
reaching 'b' from 'a' would be a longer path.
As a result, we need to implement an lca variant that
returns the starting node if one is reachable from the
other, even if it's already found the technically correct
least common ancestor.
This replaces our LCA algorithm with one based on the
painting we do while finding a twixt, making it give
the resutls we want.
git/query: fix spurious merge requests
Due to the way LCA is defined, a using a strict LCA
on a graph like this:
<--a--b--c--d--e--f--g
\ /
+-----h-------
can lead to spurious requests to merge. This happens
because 'lca(b, g)' would return 'a', since it can be
reached in one step from 'b', and 2 steps from 'g', while
reaching 'b' from 'a' would be a longer path.
As a result, we need to implement an lca variant that
returns the starting node if one is reachable from the
other, even if it's already found the technically correct
least common ancestor.
This replaces our LCA algorithm with one based on the
painting we do while finding a twixt.
directory entries cannot span sector boundaries, meaning
that the end of a sector would be zero padded until the
next sector.
we have to skip over these zero paddings to fully read
the directory.
Plumber both posts a service to /srv and sets a $plumbsrv environment
variable. Our libplumb no longer uses $plumbsrv and nothing else
does. It's a silly hack; rc doesn't update /env immediately, and
scripts, which for instance set up subrios, cannot rely on it to
clean up the plumber at the end.
Instead, add the option to specify a srvname, actually check for some
common errors and print a usage string.
Thanks to Ori for input and a preliminary patch.
- enforce same behaviour as cachedb server in dblookup():
- force Taaaa record type on ipv6= attributes, regardless of value
- return Taaaa records for ip= attributes containing ipv6 values
- return Ta records only for ip= attributes containing ipv4 values
- for compatibility, bring back support for txtrr= type, but handle consistently
Git has the ability to track the person who
creates a commit separately from the person
who wrote the commit. For git9, we ignored
this feature.
However, as we start using git/import more,
it will be useful to figure out who imported
a commit, as well as who wrote it.
This change adds support for seeing this
information in git, as well as setting the
author and committer separately in git/import.
Target generation is revised, split into $YTARG and $TARG.
$PROGS is inlined to the cmd target.
%.cpus is added to allow chaining: mk all.cpus
$POWERLESS is added, since dtracy doesn't build yet on ppc.
$DIRS regexp is simplified, simplifing $NOMK.
$cpuobjtype is replaced with cp's recipe for copying itself on $cputype.
$APEDIRS is removed.
The none target is renamed to usage, since it prints out usage.
The ape target is removed.
The dirs target is replaced by all.dirs
%.directories is replaced by %.dirs
The all target serializes directories after cmds to match the install target recipe.
All regexp rules are replaced with nonregexp versions for clarity.
The &:n: rule is removed. Just build the $O.$cmd file.
.y files now build .c files, not .tab.c files, and remove (bc|units|mpc|pc).c:R:
All safeinstall rules are removed.
The cleanfiles rule is renamed to cleancmds and simplified.
%.clean is removed. Just use mk cleancmds.
The install rule serializes cp and yacc before building anything else, avoiding races.
The installall recipe is simplified with the install.cpus prereq.
%.installall is removed. Just use mk $cmd.install.cpus
The $O.cj, %.update, and compilers rules are removed.
openssh now disables RSA/SHA-1 by default, so using RSA/SHA-1 will
eventually cause us problems:
https://undeadly.org/cgi?action=article;sid=20210830113413
in addition, github will disable RSA/SHA-1 for recently added RSA keys:
https://github.blog/2021-09-01-improving-git-protocol-security-github/
this patch modifies ssh.c to use RSA/SHA-256 (aka rsa-sha2-256)
instead of RSA/SHA-1 (aka ssh-rsa) as the public key algorithm.
NOTE: public rsa keys and thumbprints are ***NOT AFFECTED***
by this patch.
while we're here, remove the workaround for github.com. it seems
that github has fixed their implementation, and does not look into
macalgs when we're using an aead cipher.
---
remove old /sys/src/games/nes/joynes in favor of joy(1).
joy(1) has more buttons for the other emulators; there is
no longer a significance in the order of the keys.
document nusb/joy, add information in each emulator manpage.
> This patch enables use of the igfx controller rather than vesa on the
> eeepc1005ha netbook. This means using the full screen resolution of
> 1024x600.
> *Andrew Eggenberger*
Per the docs:
the sender SHOULD include a LF, but the
receiver MUST NOT complain if it is not
present.
I typoed away the SHOULD, and got missed the
MUST NOT.
thanks qbit.
the subst utility no longer supports a '-g'
flag, but this was left behind in commit;
this means that the lines listing modified
files were not correctly commented in the
commit header.
This is mostly harmless, but when using an
editor like sam to edit the commit message,
the modified lines would have to be removed
manually.
was testing out the git/import tweaks and accidentally
pushed this commit. No comment on whether we want it,
but it definitely wasn't ready for merge.
Oops.
Often, people (including myself) will write emails that
can almost be applied with git/import. This changes
git/diff and git/import so that things will generally
work even when assembling diffs by hand:
1. git/import becomes slightly more lax:
^diff ...
^--- ...
will both be detected as the start of a patch.
2. git/diff produces the same format of diff
as git/export, starting with paths:
--- a/path/to/file
+++ b/path/to/file
which means that the 'ape/patch -p1' used
within git/import will just work.
So with this, if you send an email to the mailing list,
write up a committable description, and append the
output of git/diff to the end of the email, git/import
should just work.
[this patch was send through the mailing list using the
above procedure, and will be committed with git/import
to verify that it works as advertised]
2021-08-14 17:50 GMT, kemal <kemalinanc8@gmail.com>:
> 1- as driver reads 8 bytes from nvm instead of 6 so fw doesn't
> spit us an ADVANCED_SYSASSERT, it was reading 2 more
> extra bytes. apparently those 2 extra bytes were put to
> the first 2 bytes of our buffer, so we got to skip that.
some more thoughts on this, i think as 0x15*2 is not multiple
of 8, fw rounds the offset to 0x14*2. i have touched to code
to read data from 0x14*2 then ignore the first 2 bytes, just
so it's not confusing. if this causes mac to be read wrong again,
report.
also, some more changes:
1. set the fwname at iwlpci, just to align the behavior with 8000+.
this is a cosmetic change.
2. i have discovered that on device boot/reset/shutdown functions,
our driver slept way much more than it should. the reason for that is,
driver used the function delay() on places where it needs to use
microdelay() instead. i have modified the code to use microdelay().
wpi likely needs similar changes too. i hope that this does not
break the code.
3. zzz a bit more on tx/rx scheduler shutdowns and niclock.
4. openbsd's iwm and linux apparently does not check if ownership
was obtained anymore in their handover functions. instead they
just loop until the hw is ready. aligned the behavior.
see linux commit: 289e5501c3141191dd830957f1d764d3dc14a54f
5. don't take antenna masks from nvm. it's apparently empty
in some cards from 7k family. we will rely on what the fw file gives
us.
6. when the calibration is completed, wakeup the proc that runs
postboot. otherwise that thing sleeps for like 2 whole seconds
even if calibration completed earlier.
i honestly don't think any of these changes will fix 7260 not
being able to get calibration results, but i don't see anything
wrong at all in postboot7000 at this point. i will just hope
these changes somehow make it get calibration results.
NOTE: latest patch on the 9front ml, posted Mon, 14 Feb 2022 15:26:55 +0300
(non functional as of yet)
Some gba cartridges use flash chips produced by a few different
manufacturers for backup memory. A game rom may then try to read the
device id for its flash chip and break if it's the wrong one. There's
no way for us to know which chip is supposed to be there, save for
looking it up in some database. These chips are either 64k or 128k
big. gba(1) hardcodes the id for the SST 64k chip, but games like the
Pokémon ones use a 128k Macronix chip and expect a different id,
completely breaking them.
This patch sets a different default for 128k flash backups, and gives
the ability to set the exact type when creating the save file if it's
really necessary. This new default fixes the Pokémons. The type is
saved in the save file, but this will *not* break existing ones. It
may be that we don't need to worry about the type and just have an id
that corresponds to the right chip size, which is why these defaults
make sense, but I haven't tested more than a dozen roms, mostly since
I don't really know which games use 128k flash.
Before applying this patch the following will fail to open ed
in the '/tmp/s p a c e' folder:
<snip>
% mkdir '/tmp/s p a c e'
% window -cd '/tmp/s p a c e' ed
!pwd
/tmp/s p a c e
!
q
<snap>
After applying the patch the above sequence works as expected,
opening ed in the '/tmp/s p a c e' folder, printing the present
working directory, and quitting ed.
The root cause was a faulty computation of the pointer `s`,
being off by one, leading to any arguments after the
directory path to be skipped.
This regression was introduced in revision:
• 614f1d6268
Thanks umbraticus for finding and reporting the issue.
The device address is highly variable and depends on
all prior enumerated devices.
This can happen with some devices that do not have
a serial number and all devices of the same type
having the same hname.
Using a counter of collisions per hname makes more sense
and is more stable (given that the order devices are
enumerated is deterministic).
This allows mapping incoming filenames to a different name
using regular expressions, followed by subtitutions
of the %[ICE] format strings.
I needed this to have individual cmdline.txt files for
netbooted raspberry pi's. In this example, i map cmdline.txt
to %C, which gets substituted for /cfg/pxe/$ether of the client.
The transitional PCI device ID for block devices is 0x1001, and the
virtio spec says that devices must have the transitional device ID or
0x1040 + the virtio device ID (2).
Mothra does not currently render text inside <samp> tags inline
similar to <code>, but instead treats them like <pre> which is actually
incorrect behavior. The following small patch should fixes issue.
Sometimes, there is the one-off occation when one needs to
pass a huge list in rc...
This change makes devenv track total memory consumption
of environment groups allowing them to grow up to 1MB in
size (including overhead).
(Before, only the variable size was restricted, but
not the amount of files being created).
The maximum value size of a single environment variable
is set to half of the total size, which allows the
occational large value. (But not many of them).
Because we track all memory consuption, it is also
now possible to create around 10k small environment
variales.
A hashtable is added for name lookups and the qid.path
was changed to allow direct indexing into the entry
array without needing a scan lookup.
All smalloc() calls have been removed, exhaustion is
handled with error(Enomem) avoiding deadlock
in case we run out of kernel memory.
This does not have any adverse effect, since yylex never calls mpatov
with a string with leading 0 (and not 0x) that contains non-octal
digits, but the condition was wrong regardless.
Strings for existing codes in the most used server (OpenSSH) just
repeat the error code name. OTOH we like to have wording of the
strings under our control as much as possible, so we can easier find
and process them. Error strings are still usefull as fallback for
compatibility with future versions of the server.
- fix showpage1 only decrementing proc counter once limit is reached;
this blocked having more than one loadpages process after NPROC calls,
since the next one has to wait until the last has exited
- allow procs to skip pages currently being loaded by others; this
forced processes to wait for each other at the same page
- bump NPROC from 4 to 8
- (hack) immediately fork a few times after adding all pages at
startup to force loading a batch of pages in parallel
To avoid a MAXMACH limit of 32 and make
txtflush into an array for the bitmap.
Provide portable macros for testing and clearing
the bits: needtxtflush(), donetxtflush().
On pc/pc64, define inittxtflush()/settxtflush()
as no-op macros, avoiding the storage overhead of
the txtflush array alltogether.
The new rc's exit status will be '' for a successfull
pipeline execution instead of '|'.
This is a bit too tightly coupled, so just use if()
statement instead, handling this in a portable way.
programs that try to use /srv would choke when running
under iostats, because we intercepted operations on the
special, magic fd passing; we should instead give them
access to the real /srv.
when running outside of a repository, we would try to
remove '$msgfile.tmp', but we had never actually set
'$msgfile'.
the error is harmless, but annoying.
The following patch fixes acme display glitches at the bottom fringe
of columns when adding/moving/resizing windows.
Here an example of an easy to reproduce case:
• https://invidio.xamh.de/watch?v=iLekQrxycaM
…opening acme and resizing a column to the right is all that is needed.
The functions winresize(…) and textresize(…) are extended with an
additional parameter `fillfringe` to indicate if a window/tag shall
fill a potential fringe area that would otherwise remain white.
The changes have been inspired by the approach taken in plan9port
acme.
Eckard's test case:
cat <<! | cat
asdf
!
The issue is that we have to continue parsing until we see
the '\n' before consuming the here document.
So we revert to the old approach of having two functions:
heredoc() which remembers if we'v seen a heredoc redirection
and a second readhere() function that reads the doc from
the lexers input and sets Tree.str on thee REDIR node.
due to the way the size of buf was calculated, the parent
file had one trailing null byte for each parent. also, while
we're here, replace the sprint with seprint, and compute the
size from how much we printed in.
Fixup remaining Plan9 dependencies (chartorune()).
Add Makefile for UNIX-like systems (tested with Linux and APE).
Make error printing consistent, use Errstr() explicitely.
Get rid of NSTATUS buffer limit, just malloc it.
git used to track cache size in object
count, rather than bytes. This had the
unfortunate effect of making memory use
depend on the size of objects -- repos
with lots of large objects could cause
out of memory deaths.
now, we track sizes in bytes, which should
keep our memory usage flatter.
Untangle the lexer and interpreter thread state.
Fix the file and line number error reporting, getting rid of
Xsrcfile instruction, as the whole code block can only come
from a single file, stuff the source file in slot[1] of the
code block instead.
Remove limitations for globber (path element limits)
and be more intelligent about handling globbing by
inserting Xglob instruction only when needed and not
run it over every Xsimple argument list.
Remove fragile ndot magic and make it explicit by adding
the -q flag to . builtin command.
Add -b flag for full compilation.
Make exitnext() smart, so we can speculate thru rcmain and
avoid the fork().
Get rid of all print(2) format functions and use io
instead.
Improve the io library, adding rstr() to handle tokenization,
which allows us to look ahead in the already read buffer
for the terminators, avoiding alot of string copies.
Auto indent pcmd(), to make line number reporting more usefull.
Implement here documents properly, so they can work everywhere.
We seem to have a botch in the protocol negotiation, where
we leak some protocol packets into the packfile; this will
need to be fixed before we put this change in.
The initial working directory of a new window may be set by a
`-cd directory` option. However, the `-cd directory` option is
not capable of handling paths with spaces when used via wctl.
To enable paths with spaces the function
/sys/src/cmd/rio/wctl.c:/^parsewctl is extended to handle quoted
directory paths.
Before applying the patch the following will fail to open a new
window by writing to /dev/wctl:
<snip>
% rio -i window
% mkdir '/tmp/path with space'
% echo new -cd '''/tmp/path with space''' window -x rc >> /dev/wctl
% pwd
/tmp/path with space
<snap>
The following invocation fails as well:
<snip>
% window -cd '/tmp/path with space'
% pwd
/tmp/path with space
<snap>
After applying the patch the above sequences work as expected,
opening a window running rc with the working directory set to
'/tmp/path with space'.
exportfs -d logs 9p traffic to /tmp/exportdb.
-f allows writing to a different file.
exportfs silently continues if it doesn't have
permissions to create or write to /tmp/exportdb.
These are poor behaviors.
A better default is to write to stderr, since it
is 9P debug info that is better immediately printed,
and not user info that is better handled by syslog().
As a result, -f is obsolete and thus removed.
Redirect responsibility is now on rc.
As a side effect, rc will fail if it doesn't
have permissions to write.
exportfs(4) is updated to reflect all changes
and with a better Synopsis.
oexportfs is changed to match exportfs.
oexportfs(4) is updated to reflect all changes.
The Synopsis is not changed due to the number of flags.
Removed -f from iostats.
iostats(4) is updated to reflect all changes.
---
http://fqa.9front.org/fqa1.html#1.2 states the supported archs.
However, clean and nuke also remove build files for 0 (spim) and q
(power). 'mk all' using those archs fails; 'mk kernels' also tries to
build all the kernels, even those which are not supported. For
example, I tried to build the power arch (qc, qa, ql) and without
surprise it failed (when building dtracy): ...
mk dtracy
qc -FTVw dtracy.c
yacc -v -d -D1 parse.y
qc -FTVw cgen.c
qc -FTVw act.c
qc -FTVw type.c
== regfree ==
REGISTER R0 <11> STRUCT DTAct cgen.c:302
== regfree ==
REGISTER R0 <11> STRUCT DTAct act.c:266
== regfree ==
qc -FTVw agg.c
cgen.c:299 unknown type in regalloc: STRUCT DTAct
cgen.c:299 bad opcode in gmove INT -> STRUCT DTAct
cgen.c:302 unknown type in regalloc: STRUCT DTAct
cgen.c:302 bad opcode in gmove INT -> STRUCT DTAct
cgen.c:302 error in regfree: 0 [0]
REGISTERmk: qc -FTVw cgen.c : exit status=rc 387386: qc 387392: error R0
<11> STRUCT DTAct act.c:269
act.c:250 unknown type in regalloc: STRUCT DTAct
act.c:250 bad opcode in gmove INT -> STRUCT DTAct
act.c:266 unknown type in regalloc: STRUCT DTAct
act.c:266 bad opcode in gmove INT -> STRUCT DTAct
act.c:266 error in regfree: 0 [0]
act.c:269 unknown type in regalloc: STRUCT DTAct
act.c:269 bad opcode in gmove INT -> STRUCT DTAct
act.c:269 error in regfree: 0 [0]
act.c:274 unknown type in regalloc: STRUCT DTAct
act.c:274 bad opcode in gmove INT -> STRUCT DTAct
act.c:274 error in regfree: 0 [0]
too many errors
mk: for(i in cc ... : exit status=rc 382748: rc 387379: mk 387381: error
mk: date for (i ... : exit status=rc 373781: rc 382226: mk 382227: error
cpu%
The patch below skips over non-supported architectures. Is that
something we want? This way, 'mk kernels' should work without a
problem (tested on amd64). Then if someone works on getting those
architectures supported again in the future, they can be added back
in.
snoopy shares ndb/dns's dns parser code, but has its own
copy of rralloc() function, which is responsible to allocating
auxiolary data structures on an RR depending on the type.
ndb/dns gained some support for some new types, but snoopy's
copy of rralloc() was not updated, resulting the auxiolary
structures to be nil, and the shared parsing routines crashes
when trying to dereference them.
this just syncs the copies, we might consider moving rralloc()
into its own file so it can be completely shared.
Git currently gets a bit confused if you try to
manipulate files by absolute path. There were also a
number of places where user-controlled file paths ended
up getting passed to regex interpretation, which could
confuse things.
This change mainly does 2 things:
- Adds a 'drop' function which drops
a non-regex prefix from a string, and uses
that to manipulate paths, simplifies 'subst',
and removes 'subst -g', which was only used
with fixed regexes; sed does this job fine.
- When getting a path from a user, we
make it absolute and then strip out the head
Along the way it cleans up a couple of stupids:
- 'for(f in $list) if(! ~ $#f 0) use $f:
$f can't be a nil list because of
list flattening.
- removes a useless substitution here:
all=`$nl{{git/query -c $1 $2; git/query -c $2 $3} | sed 's/^..//' | \
gsubst '^('$ourbr'|'$basebr'|'$theirbr')/*' | sort | uniq}
where git/query -c doesn't produce
paths prefixed with the query.
exportfs -d logs 9p traffic to /tmp/exportdb.
-f allows writing to a different file.
exportfs silently continues if it doesn't have
permissions to create or write to /tmp/exportdb.
These are poor behaviors.
A better default is to write to stderr, since it
is 9P debug info that is better immediately printed,
and not user info that is better handled by syslog().
As a result, -f is obsolete and thus removed.
Redirect responsibility is now on rc.
As a side effect, rc will fail if it doesn't
have permissions to write.
exportfs(4) is updated to reflect all changes
and with a better Synopsis.
Update tinc(8) man page to:
1. state the implementation aligns with 1.0.36 of tinc.org;
2. use same hostname as mentioned in usage line.
Fix typos in tinc.c.
The '-m' flag was added to date largely
to support git scripts. It predates the
tmdate code, which is why it exists, but
it's a recent enough addition that nothing
I'm aware of uses it, other than git.
As a result, it would be good to remove
it, so let's do that.
As part of the transition to 64 bit userspace
APIs, we need to make our libc functions which
take arrays all accept and deal with large sizes.
This does the work for qsort.
According to the ASN.1 BER spec, we should be encoding
all sequences (including empty ones) as constructed:
8.9.1 The encoding of a sequence value shall be constructed.
8.10.1 The encoding of a sequence-of value shall be constructed.
8.11.1 The encoding of a set value shall be constructed.
8.12.1 The encoding of a set-of value shall be constructed.
However, we were only setting them as constructed when the
list was non-empty.
This changes it, and makes letsencrypt happy with the CSRs that
we generate.
when running 'mk clean', we get a stray
libpanel.$O.a, because our 'mk clean'
rule expects libpanel.a$O.
This causes build failures after mk clean
on a symbol change.
> After some tinkering I managed to get igfx working on this device.
> hw cursor works.
> The only caveat is that I can only get video over hdmi...
> will revisit displayport later
- avoid print() format routines (saves alot of code)
- avoid useless opens of /dev/cons (already done by initcode)
- avoid useless binds of /env and /dev (already done by initcode)
- do bind of /shr in bootrc, it is not needed by us
- we'r pid 1 so kernel will print the exit message for us
currently, git/fetch prints the refs
to update before it fully fetches the
pack files; this can lead to updates
to the refs before we're 100% certain
that the objects are present.
This change prints the updates after
the packfile has been successfully
indexed.
We used to use performance cycle counter for cycles(),
but it is kind of useless in userspace as each core
has its own counter and hence not comparable between
cores. Also, the cycle counter stops counting when
the cores are idle.
Most callers expect cycles() to return a high resolution
timestamp instead, so do the best we can do here
and enable the userspace generic timer virtual counter.
sbrk(0) returns the current end address of the BSS segment,
not the base. This might have been confused with the behaviour
of segbrk(), which when given a zero address returns the base.
> String becomes stringbg so we have guaranteed max contrast in case the
> user changes the picture. (If you don't change the picture, it's
> white-on-black-on-black (sic) and you would never notice the change.)
