the special sencodefmt() in ndb/dn.c is only used with %H format for
hexadecimal printing for binary strings. removing the unused
calls to enc32() and enc64() reduces the code size by arround 4K.
(this is usefull for ndb/getip which gets linked into the kernel).
the approximation of n*2 to calculate the number of output bytes
for enc64() fails for inputs of size < 3. this is fixed by using
encodefmt() which gets the calculation right and also simplifies
the code avoiding the allocation and freeing of intermediate string
buffers.
mcountseg(), mfreeseg():
use Pte.first/last pointers when possible and avoid constructs
like s->map[i]->pages[j].
freepte():
do not zero entries in freepte(), the segment is going away and
here is no point in zeroing page pointers. hoist common code at
the top avoiding duplication.
segpage(), fixfault():
avoid load after store for Pte** pointer.
fixfault():
return -1 in default case to avoid the "used but not set" warning
for mmuphys and get rid of the useless initialization.
syssegflush():
due to len being unsigned, the pe = PGROUND(pe) can make "chunk"
bigger than len causing a overflow. rewrite the function and deal
with page alignment and errors at the beginning.
syssegflush(), segpage(), fixfault(), putseg(), relocateseg(),
mcountseg(), mfreeseg():
keep naming consistent.
the "to" address can overflow in syssegfree() causing wrong
number of pages to be passed to mfreeseg(). with the current
implementation of mfreeseg() however, this doesnt cause any
data corruption but was just freeing an unexpected number of
pages.
this change checks for this condition in syssegfree() and
errors out instead. also mfreeseg() was changed to take
ulong argument for number of pages instead of int to keep
it consistent with other routines that work with page counts.
sdbio() tests if it can pass the buffer pointer directly to
the driver when it is already in kernel memory. we also need
to check if the buffer is properly aligned but alignment
requirement is handled in system specific sdmalloc() and
was not known to devsd.
to solve this, we *always* page align sd buffers and get rid
of the system specific sdmalloc() macro (was only used in bcm
kernel).
chaninit() does not initialize Chan.qentry and Chan.nentry
and there is no way to get rid of such a channel. nobody is
using it, so removing the function to avoid confusion.
ignore physical segments in mcountseg() and mfreeseg(). physical
segments are not backed by user pages, and doing putpage() on
physical segment pages in mfreeseg() is an error.
do now allow physical segemnts to be resized. the segment size
is only checked in segattach() to be within the physical segment!
ignore physical segments in portcountpagerefs() as pagenumber()
does not work on the malloced page structures of a physical segment.
get rid of Physseg.pgalloc() and Physseg.pgfree() indirection as
this was never used and if theres a need to do more efficient
allocation, it should be done in a portable way.
it is possible to have fonts belong to different or no display, so the
check for defaultsubfont has to be against font->display, not the global
display variable.
remove unused freeup() routine.
handle strdup() error in allocsubfont() and realloc() error in buildfont().
the namespace might be shared by other processes. instead, we
create a anonymous pipe with pipe() and use devdup to open one
end close-on-exec. this is shorter and avoids the race condition.
do not touch Execargs after writing the error message as the
process might be gone after the write. this was to manually
close the fd which isnt neccesary as the kernel will do it
for us on the following exit.
rebuilding the xref table does not work for pdfs with
compressed object streams. as a work arround, we skip
xref table verification and ignore wrong xref gen #
for gen 0 objects.
convert:
x = B || W
MOVxLZX a, r; MOVxQZX r, b -> MOVxQZX a, r; MOVQ r, b
MOVxLSX a, r; MOVxQSX r, r -> MOVxQSX a, r; MOVQ r, r
the MOVQ can then be eleminated by copy propagation.
improve subprop() by accepting other mov and lea
instructions as the source op.
tlsServer() closes the passed in fd, in our case fd=1 leaving it
with no std output which got occupied by pipe() filedescriptor
which it then closed after duping... a classic.
delete all this mess. theres no reason to fork() and copy traffic
on a pipe at all as tlsServer() gives us a perfectly valid filedescriptor.
just dup() and exec() and we'r done.
the imported wc from sources is arround 8 times slower
than our old one. it is common to run wc on large log files
to count lines. so i think the implementation complexity
is justified. (just like with grep)
the following hooks have been added to the ehci Ctlr
structore to handle cache coherency (on arm):
void* (*tdalloc)(ulong,int,ulong);
void* (*dmaalloc)(ulong);
void (*dmafree)(void*);
void (*dmaflush)(int,void*,ulong);
tdalloc() is used to allocate descriptors and the periodic
frame schedule array. on arm, this needs to return uncached
memory. tdalloc()ed memory is never freed.
dmaalloc()/dmafree() is used for io buffers. this can return
cached memory when when hardware maintains cache coherency (pc)
or dmaflush() is provided to flush/invalidate the cache (zynq),
otherwise needs to return uncached memory.
dmaflush() is used to flush/invalidate the cache. the first
argument tells us if we need to flush (non zero) or
invalidate (zero).
uncached.h is gone now. this change makes the handling explicit.
map the whole ocm memory on boot so we can translate physical to
virtual addresses and back for uncached memory using KADDR() and
PADDR().
replace ualloc() with ucalloc() returning virtual address. physical
address can be acquired with PADDR() now.
as ocm is now always mapped, use KADDR() instead of tmpmap() for
mp bootstrap.
passing "", "." or ".." as name caused a crash in
getenv() as it would open the directory; then seek()
to determine the file size would fail and return -1.
now checking for these special names and set
error string when its bad.
doing a single read() will not work when /env has a
9p fileserver mounted onto it and the file size is bigger
than the i/o unit. so doing incremental reads until
we get eof.
there are no kernels currently that do page coloring,
so the only use of cachectl[] is flushing the icache
(on arm and ppc).
on pc64, cachectl consumes 32 bytes in each page resulting
in over 200 megabytes of overhead for 32gb of ram with 4K
pages.
this change removes cachectl[] and adds txtflush ulong
that is set to ~0 by pio() to instruct putmmu() to flush
the icache.
vbs/vbe members in Mode was only used in the vesadb
and cannot be changed from vgadb.
use shs/ehs in drivers when refering to the horizontal
sync pulse. clarify the matter in a comment.
link detailed timing modes at the head of the edid
modelist. these are the modes we'r interested in,
not the ones from vesadb.
igfx and vesa can determine monitor timing information from ddc
and store the edid info for connected monitors in vga->edid[].
when monitor type cannot be found in vgadb, we consult the edid
information and make a mode based on the edid info.
this avoids having to maintain a vgadb entry for each monitor.
monitor can be set to "[width]x[height]@[freq]Hz" for a specific
edid setting. when not found, a mode is searched based on the
size.
so the following should work:
aux/vga -m 1366x768@60Hz -l 1366x768x32
aux/vga -m auto -l 1366x768x32
dbvesamode() modified the passed in size string in the process
of option parsing. this is a no-go because the string might be
constant in the read only section. provide cracksize() function
for the parsing and make a static copy.
do the vendor specific monitor detection in vbesnarf() instead
of vbecheck(). vbecheck()'s purpose is to check if vesa bios
service is avialable, not snarf graphics card state.
nvidiascale() was a no-op because it missed the vbecall() at
the end of the function. this means it was never tested so i
add the missing vbecall(), but disable nvidiascale for now
until someone tests this.
keep fancy stuff out of the Vbe structure. it is just there for
making bios calls, not keep state about the graphics card.
we used to read beyond the boundaries of the becon because of
the end pointer was offset by the beacon header. this is
also what caused the double entries.
this bug happens when the kernel runs out of mount rpc
buffers when allocating a flush rpc. in this case, mntflushalloc()
will errorjump out of mountio() leaving the currently in
flight rpc in the mount. the caller of mountrpc()/mountio()
frees the rpc thats still queued in the mount leaving
to interesting results.
for the fix, we add a waserror() arround mntflushalloc() and
handle the error case like a mount rpc failure which will
properly dequeue the rpc's in flight.
this adds support for eap-peap/mschapv2 and eap-ttls/pap.
code has only been tested with freeradius and a cheap
access point, not tested with actual eduroam network.
this is used for wpa2 enterprise peap/mschapv2. server role
is not implemented as that would require changing the
wire format on the auth server.
the naming is unfortunate as we already have proto=mschap2 which
really refers to ntlmv2.
the FPOFF macro that follows the FXSAVE/FSAVE instructions in l.s
used to execute WAIT instruction when the TS flag was not set. this
is wrong and causes pending exceptions to be raised from fpsave which
is called from provsave() which holds up->rlock making it deadlock
when matherror() tries to postnote() to itself.
so making FPOFF non-waiting (just set TS flag).
we handle pending exception when restoring the context.
program secret plane size and position registers described as "reserved"
in g45_vol_3_register_0_0.pdf that was found by inspecting vesa bios
port traces.
also, we have to set 18:19 (Cursor/Dispaly/Overlay Planes Off) in
PIPExCONF while programming the planes on this card. this is what
vesa bios does on modeset.
avoid sync the jar file when fids get clunked.
the only reason to sync the jar on clunk is when it has
been marked dirty (cookies added or deleted) and we
want to flush the changes to disk.
- rewrite when jar->dirty != 0 (caller modified the in memory jar)
- reread when the jar->qid != stat(jar->file)->qid (on disk file changed)
- ignore deleted cookies in cookiesearch()
initially, pio was used to access registers so i didnt need
a kernel driver for initial testing.
pio does not work under efi, so use mmio to access registers.
check that Free.next and Free.prev pointers are not nil.
check that Free.left and Free.right are Poison in non-tree nodes.
check that Free.left and Free.right are *not* Poison in tree nodes.
change Poison to 0xffffffffcafebabe for 64bit machines.
we have to reset hwblank when switching drivers to
prevent the generic vgablank() to be called by
blankscreen().
remove code setting hwblank from vga drivers as
devvga will always force hwblank to be 1 or 0
depending on if the driver provides a native blanking
routine.
set hwaccel to 1 when the driver provides native fill
and scroll routines independent of softscreen being
disabled. this allows hw acceleration to be used when
softscreen gets switched off.
don't hold drawlock duing vga enable and disable, but just zero
the function pointers under drawlock *before* disabling the vga
device.
holding the drawlock while calling out into enable and disable
is not a good idea. with vgavesa, this might deadlock when
userspace realemu tries to print in a rio window with vgavesa.
in 9front, screen blanking is always initiated from process context,
so there is no need for a kproc anymore.
care has been taken for the race between vesadisable() and vesablank()
by acquiering the drawlock prior calling scr->dev->enable() and
scr->dev->disable(). this also has the side effect of accelerated
fills and scrolls not being called during device disable.
Prior to switching display, switch to text mode 3, which
is supported by anything, then set display, search for the
desired mode, load it if found. If not found, set the display
to the old one and switch to the old mode back.
the boolcopy optimization doesnt doesnt use Buffer.alpha, tho
the debug function dumpbuf() still can dereference it. to keep
it simple, always have Buffer.alpha point to the channel or
&ones when not used.
previously ircrc dialed through /net itself and resolved ips on its own. this prevented the use of an ip address, and also prevented use of ipv6. now you can use an ip, or a dns name that resolves to ipv6. the -T flag is also added to use tlsclient for encrypted connections.
At least on some NVIDIA cards the default scaling mode makes
black borders visible on all sides, even on native resolution.
This patch adds a generic "scaling MODE" command to vgactl
and adds support for it on VESA through NVIDIA VBE OEM extension.
It hasn't been tested on any other video cards, but shouldn't
break anything as the scaling mode is only set on write to vgactl.
we have to call tmpmap() with interrupts disabled as the map
is a per cpu and a interrupt can preempt us while we where
commited to use a entry but *before* we wrote it!
tmpunmap() already calls coherence() before flushpg() so it
is not needed after tmpunmap().
splhi() in l2free() isnt needed as l2free() is always called
with interrupts disabled from mmuswitch() and mmurelease().
fpsave needs to disable the fpu! otherwise we won't catch
the mathtrap() in the kernel or when context switching to
another process that will attempt to use it.
