loading the divider before programming one shot mode *sometimes*
gives the wrong frequency. (X200s got 192Mhz vs. 266Mhz, after
5 boot attempts)
also reload the divider after programming periodic mode. (from
http://wiki.osdev.org/APIC_timer)
dnauthdb() would relabel expired rr's as rr->db == 0 to make
them get garbage collected by dnage(). but this doesnt work
due to dn->keep and also causes the deduplication to fail on
rrattach() as rrattach1() handles rr->dn/rr->auth as separate
name spaces.
this causes duplicate entries in the rr's when ndb gets
gets changed. to fix, we just delete the expired (removed from
ndb) rr's immidiately in dnauthdb() instead of trying trick
dnage() to garbage collect it.
doesnt seem to be reliable. also, separate tsc frequency measurement
and cpu loopconst measurement. turned out with *notsc=, the simplcycles()
calls would mess up loopconst.
we previously used tsc only on cpu kernel. now that
we use it on terminal kernel too, there might be some
surprises ahead.
so make it possible to disable tsc for machines where
the tsc rate is not kept constant across cores or is
dynamically adjusted by power management.
depending on the font, poping the menu would move your cursor
one pixel down each time (due to division). this is annoying
when using a trackpoint and trying to repeat some operation
over 9000 times.
the cursor should only be moved when the menu is repositioned
to contain it on the screen.
- same problem with wstat, if we error then owner has been already updated...
- avoid smalloc while holding qlock in wstat, do it before
- pikeshedd style...
- wstat would half update the Srv data structure if name was too long
- srvname() walked the linked srv list without holding srv qlock
- dont access sp->chan while not holding srv qlock in srvopen()
- dont modify sp->owner while not holding srv qlock in srvcreate()
- avoid smalloc() allocations while holding srv qlock
- style pikeshedding, sorry
resizewin() has some extra logic making sure the rect doesnt get too big.
rio would otherwise refuse to create the window and the operation will fail
completely.
on usb ethernet, it can happen that we read truncated packets smaller
than the ethernet header size. this produces a warning in pullupblock()
later like: "pullup negative length packet, called from 0xf0199e46"
we cannot assume theres only one instance of an acpi table. some
bios have multiple SSDT tables and we would only find the first
one.
now, we keep a second array to record the physical address of
the table visited by maptable(). load all instances to the
SSDT.
- fix bogus execution of Else{} blocks
- always allocate Env in amleval()
- add Sleep() and Stall() instructions
- keep package size for packages with empty body
from test(1):
f -older t True if file f is older than (modified before)
time t. If t is a integer followed by the letters
y(years), M(months), d(days), h(hours),
m(minutes), or s(seconds), it represents current
time minus the specified time. If there is no
letter, it represents seconds since epoch. You
can also concatenate mixed units. For example,
3d12h means three days and twelve hours ago.
this means *without* [y M d h m s] unit, t is *absolute* time
in seconds since epoch.
If 64-bit multiply has to save both AX and DX, it could load the wrong value
into DX; also, biggen shouldn't allocate either AX or DX as temporaries
when using the template for MUL.
doing poolcheck should give us better context to figure out
what memory blocks / owners corrupted the blocks after free.
this is for hunting down a memory corruption seen in connection
with usb serial.
this simplifies the arm ports and keeps all the stuff in one place
instead of spreading it thru notify(), trap() and syscall() functions
and prevents useless fp state copying for kernel procs.
also make sure to save fp in notify while still splhi().
the tag-word is not compatible between x87 and sse, have to convert
properly for emulation to work.
we now copy fp state across fork (again!) to preserve FCW and MXCSR
registers. this might not be neccesary as we could probably just
get the current value for the curren process and avoid the fpsave()
call, but become conservative again.
to fix this, make genwww return 0 if w->url is nil and output an error message when attempting to access selection if it's nil. the problem with the w->url fix is that after clicking on the url scroll bar, an empty url history row could be highlighted by clicking on it. fix this by making sure lp->lo is not less than zero.
when we fail to fork resources for the child due to resource
exhaustion, make the half forked child process call pexit()
to free the resources that where allocated and error out.
imagereclaim would happily uncache pages from the mountcache (port/cache.c)
without ever getting a Image* released from it. simple fix, just check for
p->image->notext but make sure todo it under the page lock :)
the compiler optimizes setting unused variables out, which is
problematic if they are used in waserror() handler which the
compiler isnt aware of. rearrange the code to avoid this problem.
catch potential interrupt error from kproc(). this can happen when
we run out of processes, then newproc() will call rsrcwait()
which does tsleep(). if the process gets a note, this might
raise a interrupt error.
get a bit more verbose about process image exhaustion and make
imagreclaim() try to get at least one image on the freelist.
use rsrcwait() to notify the state, and call freebroken() in
case imagereclaim() couldnt free any images.
the variables elem and file0 and commited are explicitely
set to avoid that they get freed in ther waserror() handlers.
but it turns out the compiler optimizes this out as he
thinks the variables arent used any further. (the compiler
is not aware of the waserror() / longjmp() semantics).
rearrange the code to account for this. instead of using
a local variable to check for point of no return (commited),
we use up->seg[SSEG] to figure it out.
for file0 and elem, we just rearrange the code. elem can be
checked in the error handler if it was already assigned to
up->text, and file0 is just free()'d after the poperror().
remove silly busy loop in sysrendez. it is not needed.
dequeueproc() will make sure that the process has come to
rest.
we now always use the new FXSAVE format in FPsave structure and fpregs
file, converting back and forth in fpx87save() and fpx87restore().
document that fprestore() is a destructive operation now.
change fp register definition in libmach and adapt fpr() acid funciton.
avoid unneccesary copy of fpstate and fpsave in sysfork(). functions
including syscalls do not preserve the fp registers and copying fpstate
from the current process would mean we had to fpsave(&up->fpsave); first.
simply not doing it, new process starts in FPinit state.
If you run this:
{for (i in `{seq 1 70000}) echo '½•α·'} | mc | wc
mc will eventually suicide. The error comes from
/sys/src/libdraw/font.c:/^agefont which assumes it has a
display. Normally, this is set up by geninitdraw (usually
via initdraw), but mc.c avoids that to avoid the screen
redraws (flicker, at a minimum, but worse in long-running
cases).
graphics(2) does not prohibit this use, so I made the least
intrusive change to make it work.
the fpenv() instruction stores in x87 format, using mathstate()
would interpret fpsave as FPssestate in case it was enabled!
instead, pass the status word and fppc explicitely to mathnote()
in matherror().
get rid of m->fpsavealign buffer, as we can just use FPssesave struct
which has enougth padding so rounding up base pointer will not overflow.
use resrcwait() when waiting for memory to become available. randomize
the sleep time and properly restore old process status in case tsleep()
gets interrupted.
filesystems do not handle i/o errors well (cwfs will abandon the blocks),
and temporary exhaustion of kernel memory (because of too many i/o's in
parallel) causes read and write on the partition to fail.
i think it is better to wait for the memory to become available in
this case. the single allocation is at max SDmaxio bytes, which makes
it likely to become available. if we havnt even enought fo that, then
rebooting the machine would be the best option. (aux/reboot)
the fist problem is that qopen() might return nil and that kstrdup() will
sleep, so we should try to avoid holding the mntalloc lock. so we move
the kstrdup() and qopen() calls before the Mnt allocation, and properly
recover the memory if we fail later.
the second problem was that we error(Eshort) after we already created the Mnt
when returnlen < sizeof(f.version). this check has to happen *before* we
even attempt to allocate the Mnt structures. note that we only copy the
version string once everything is in the clear, so the semantics of the
user buffer not being modified in case of error is not changed.
a little cleanup in muxclose(), getting rid of mntptfree()...
pread does not guarantee that it would read all the data asked for.
But acme usage of disk assumes that. This issues as many reads as
needed to make acme work when read returns less data than it wanted.
pbs failed to load (silently loading garbage) 9BOOTFAT from start
cluster beyond FFFF because we ignored the low word from the
directory entry. now taking the high 16 bit of the directory's
start cluster into account.
Fsprotoclone() is not supposed to raise error, but return nil.
ipopen() seemed to assume otherwise as it setup error label
before calling Fsprotoclone(). fix ipopen(), make Fsprotoclone()
return nil instead of raising error.
Fsprotocone():
qopen() and qbypass() can fail and return nil, so make sure
the connection was not partially created by checking if read
and write queues have been setup by the protocol create hanler.
on error, free any resources of the partial connection and
error out.
netlogopen(): check malloc() error.
the initial fontresize() might fail but its error code is ignored
potentially leaving f->cacheimage == nil. make sure we call
fontresize() in loadchar() when theres no cacheimage and check the
return value to avoid nil pointer dereference.
instead of trying to resize the segment (which will not work when
the kernel picks the address as it will allocate right before
the base of the topmost segment), we create the mux segment with the
maximum size needed (arround 1.4MB) for OPEN_MAX filedescriptors.
buf slots will be reused and slots get demand paged once used.
1 the config string was grabbed Aoehsz too far into the packet due to using the wrong pointer to start.
2 never accept a response with tag Tmgmt or Tfree.
3 defend against "malicious" responses; ones with a response Aoehdr.type != request Aoehdr.type. this previously could
cause the initiator to crash.
4 vendor commands were improperly filtered out.
the integer division instructions are emulated with _div()
function patched in by 5l which does not handle conditional
execution. so do not optimize away the branch in that case.
specifing -d on the command line now only disables synchronous
drawing events.
- use threaded mouse and keyboard to allow for asynchronous
receoption of quit messages. this allows plot to exit before drawing
is completed. for programs like mapdemo, this is important.
there were two things that needed to get fixed as a result
- replace fprint(2, ...); exits("bad"); with sysfatal. also get rid
of stdio.
- dpoint needed a mach-dependentent (sic) version. otherwise
points on a resized screen will not be properly placed.
Charles Forsyth described the problem below in:
http://9fans.net/archive/2013/04/190
In a few cases, the kernel will use pprint to put a diagnostic on the
standard error (file descriptor 2). One of those is a warning that the
process has used more than 100 file descriptors. That message is possibly
obsolete and could be removed, but there are others, such as notifying an
uncaught trap that are probably helpful to make visible. In any case, as
things stand, a busy exportfs might have many file descriptors open,
provoking the diagnostic. Unfortunately, aux/listen and aux/listen1 connect
file descriptor 2 to the incoming network connection. If the connection's
protocol is not a simple, unstructured, textual one, diagnostics on the
standard error will cause confusion, in particular to devmnt.c if 9p is used.
/rc/bin/service files that start applications that run special protocols
might want to redirect file descriptor 2; alternatively, perhaps aux/listen
shouldn't redirect fd 2 by default: the few commands that do connect the remote
user to shells, or equivalent, including telnetd and sshd could dup 1 to 2
when that was sensible.
the software cursor starts flickering and reacts bumby if a process
spends most of its time with drawlock acquired because the timer interrupt
thats supposed to redraw the cursor fails to acquire the lock at the time
the timer fires.
instead of trying to draw the cursor on the screen from a timer interrupt
30 times per second, devmouse now creates a process calling cursoron() and
cursoroff() when the cursor needs to be redrawn. this allows the swcursor
to schedule a redraw while holding the drawlock in swcursoravoid() and
cursoron()/cursoroff() are now able to wait for a qlock (drawlock) because
they get called from process context.
the overall responsiveness is also improved with this change as the cursor
redraw rate isnt limited to 30 times a second anymore.
from ehci spec:
The buffer pointer list in the qTD is long enough to support a maximum
transfer size of 20K bytes. This case occurs when all five buffer pointers
are used and the first offset is zero. A qTD handles a 16Kbyte buffer
with any starting buffer alignment.
overriding aborttime in udpquery() makes no sense. it causes
recursive queries to extend the timeout infinitely. nobody
but the issuer of the request should modify aborttime.
*alen has to be initialized to the size of the buffer
by the caller, and we are supposed to put the real
size of the address in there, but not copy more than
the original *alen value (truncate).
in wpa2, the rsc field of the eapol message3 is the packet number for
*group* messages that the ap will use as there is no separate group
key message. in wpa1, we use it for the peerwise key.
the kernel uses fixed area (TSTKTOP, TSTKSIZ) of the address
space to temporarily map the new stack segment for exec. for
386 and arm, this area was right below the stack segment which
has the problem that the program can map arbitrary segments
there (even readonly).
alpha and ppc dont have this problem as they map the temporary
exec stack *above* the user reachable stack segement and segattach
prevents one from mapping anything above or overlaping the stack.
lots of arch code assumes USTKTOP being the end of userspace
address space and changing this to TSTKTOP would work, but results
in lots of hard to test changes.
instead, we'r going to map the temporary stack programmatically
finding a hole in the address space where to map it. we also lift
the size limitation for arguments and allow arguments to fill
the whole new stack segement.
the TSTKTOP and TSTKSIZ are not used anymore so they where removed.
references:
http://9fans.net/archive/2013/03/203http://9fans.net/archive/2013/03/202http://9fans.net/archive/2013/03/197http://9fans.net/archive/2013/03/195http://9fans.net/archive/2013/03/181
store errno on the private process stack so its always per process
and not just per memory space. errno itself becomes a macro
dereferencing int *_errnoloc; which is initialized from main9.s
pointing to the private stack location.
various fixes in programs that just imported errno variable with
"extern int errno;" instead of including <errno.h>.
in ape close(), do the real filedescriptor _CLOSE() *after* we cleared
the _fdinfo[] slot because once closed, we dont own the slot anymore and
another process doing open() can trash the slot. make sure open() retuns
fd < OPEN_MAX.
double check in _startbuf() holding mux->lock if the fd is already buffered
preveting running double copyprocs on a fd.
dont zero the mux->rwant/ewant bitmaps at the end of select() as we do not
hold the mix->lock.
in _closebuf() kill copyproc while holding the mux->lock to make sure the
copyproc isnt holding it at the time it is killed. run kill() multiple times
to make sure the proc is gone.
python uses processes sharing memory. it requires at least fopen() to
be called by multiple threads at once so we introduce _IO_newfile()
which allocates the FILE structure slot under a lock.
diskparts fails on thinkpad x200 sdcard reader if we dont
give the unit some time to startup. the device took about
100ms to become ready so status poll loop with a long
timeout would be overkill.
1. Go group spotted that a slightly-obscured pointer move was done by AMOVL not AMOVQ.
2. Inspecting the code further, I noticed that other pointer types were set to TLONG not TIND,
causing similar truncation of pointers to 32 bits.
add PASS_MAX to limits.h for ape, and make getpass respect it. also increase the size of
the maximum passwords (we use long ones at work). Needed for native port of SVN (in progress).
the kernel would go into endless loop when stating "stats" and "ifstats"
files and the network interface having no connections, or otherwise return
wrong stat info.
boot(8) claims that boot will launch /$objtype/init;
that is incorrect. It launches /$cputype/init (so says
both boot.c and cpurc(8)). That's the more sensible
choice. This patch fixes the man page to resolve the
mismatch.
the channel= plan9.ini parameter isnt needed anymore as we now
hop the channels to scan for beacons. the status is also indicated
with the link led :-)
handle all these flags on packet transmission like RTS for big
packets and sending data packets to the AP instead of broadcasting
everything.
properly setup bss hardware node table and filtering. now promisc
mode is only used when requested.
handle deauth message from ap.
increase node table to 32 entries.
Fix the behavior of exportfs -r.
Check the return of chdir(srv) to prevent exporting accidentally
the current working directory when the directory specified
with option -r doesn't exist.
Also fix at the same time the missing trailing \n in error
messages printed just before exits().
we gave wrong content-length in range requests. r->stop - r->start
is wrong because r->stop is the byte offset of the *last* byte, not
the *next* byte after the last.
Another band-aid fix to the usb mouse driver, to cope with a mouse which has
an interrupt endpoint number 3 but no number 1 or 2, and a report descriptor
more than 128 bytes long.
use the Srv.end callback for freeing the srv and closing the
file descriptor of a connection. this makes sure we wont free
the srv while there are still outstanding requests that would
access the srv when doing the respond() call.
we used to do getbuf() with nodata flag so it only worked when
we where lucky and got the same in memory block back. this
is uncritical once you have reamed the filesystem, its just
that sometimes ream would fail with "ream successfull, then
hjfs: fsinit: file ./hjfs not found".