- Rewrite hardware id / instance id matching
- Implement support for compatible id
- UsbStor still not attached to disk.sys, needs more research on how to get this done
svn path=/branches/usb-bringup/; revision=51580
- Change parameter name for DeviceObject in functions to clearify which device object is to received IRPs.
- Fix a typo in GetPortStatusAndChange that caused the function to return nothing for status and change.
- Call QueryStatusChangeEndpoint to send the first SCE request in Query Bus Releations.
- Complete implementation of StatusChangeEndpointCompletion. Queue a work item for DeviceStatusChangeThread, which will be used to initialize the usb device and create related device objects.
svn path=/branches/usb-bringup/; revision=51576
- Don't free device descriptor if it failed to acquire it
- Don't move out of usb configuration array. Found by special pool
- Fix bug when storing interface information which lead to a overwrite
- Implement retrieving generic type for device
- Fix bugs in QueryDeviceId
- Implement querying hardware ids
- Implement querying instance ids
- With these changes, usbstor now initializes and create pdo, which is also enumerated
- Needs more code / fixes so that disk.sys attaches to usbstor
- WIP
svn path=/branches/usb-bringup/; revision=51575
- Invoke status change callback at passive level
- Fill out usb descriptor struct instead passing everything in char array
- Use 1 byte interrupt endpoint packet size for hub for now
- Fill in interface information when SelectConfiguration request is passed. Fixes sce callback and pool corruptions
- Return device descriptor in USBHI_QueryDeviceInformation
- Tested in WinXP with special pool enabled & overrun support
svn path=/branches/usb-bringup/; revision=51572
- Start work on reimplementing UsbHub driver.
- Implement SubmitRequestToRootHub, QueryStatusChangeEndpoint, QueryInterface, GetPortStatusAndChange, SetPortFeature and ClearPortFeature.Handle QueryBusRelations.
- Partially implement PNP handling for FDO. When starting the device get all the information about the RootHub the driver will need and enable Power on all ports.
- Partially implement PNP handling for PDO, QueryId and QueryDeviceText.
- WIP
svn path=/branches/usb-bringup/; revision=51569
- Store number of bytes transferred in the transfer descriptors
- Perform queue head completion when the door bell ring has been acknowledged. Fixes race condition between multiple irps in the async list
- Fix calculation of transfer length when the request is an bulk in operation
- Use EndPointDescriptor member to access transfer type / pid direction
- Use MmGetSystemAddressForMdlSafe to retrieve system address for urb buffer
- Fix check if first transfer buffer finishes on first size if the size is of page_size
- With these changes and little luck and good weather, usb mass storage devices have been seen to work in Windows XP SP3
- Code inspired of mjmartin usbehci driver and Haiku's usb stack
svn path=/branches/usb-bringup/; revision=51506
- Port URB_FUNCTION_CLASS_INTERFACE from mjmartin usbehci driver
- Fix typo in interface declaration
- Disable assert for now
- Return irp status pending when irp is added to the queue
- Fix bug in InternalGetPidDirection
- More work on the bulk transfers, not yet working
svn path=/branches/usb-bringup/; revision=51501
- Fix a type causing CommitIrp to fail.
- Add a sanity check in StatusChangeEndpointCallBack to check that a pending SCE irp is queued.
- Start Implementing Bulk Transfers. Needs more work.
svn path=/branches/usb-bringup/; revision=51493
- Set the NakCountReload to 0 in the QueueHead that is set in the Async register, as this is a dead QueueHead marked as halted and does not need it.
- Set the Async register in StartController. Note: The Async and Periodic registers can only be modified when the controller is stopped.
- Driver now works in Qemu.
svn path=/branches/usb-bringup/; revision=51491
- hub_controller.cpp: Change RtlSetBit and RtlClearBit to RtlSetBtis and RtlClearBits for Win2k compatibility.
svn path=/branches/usb-bringup/; revision=51488
- Implement retrieving device / configuration descriptor for usb devices
- Based on mjmartin usbehci driver
- Mass storage device found wizard now pops up (fails to install - WIP)
svn path=/branches/usb-bringup/; revision=51478
- Move error checking if controller reported an error inside the door bell ring check block
- Extend interface of IUSBRequest to include DeviceAddress, which is needed to retrieve configuration descriptor of newly set address
- Allocate CtrlSetup from nonpaged pool
- Release setup packet on cleanup
- Devices now receive an device address
- Currently asserts while retrieving configuration descriptor as this code path is not yet existant
*** Assertion failed: Urb->UrbHeader.UsbdDeviceHandle == NULL
*** Source File: d:\usb-bringup\drivers\usb\usbehci_new\hub_controller.cpp, line 1118
svn path=/branches/usb-bringup/; revision=51477
- Change interface to return real async queue head
- Set the async queue head register after the controller has been started
- Enable async queue in StartController
- Port DumpDeviceDescriptor from mjmartin usbehci driver
- Remove pseudo queue head from usb queue, instead use the real async queue head exported from IUSBHardwareDevice
- Get physical address for transfer data in BuildControlTransferQueueHead
- Retrieving device descriptor now ~works, currently stops at setting device address (needs more work)
svn path=/branches/usb-bringup/; revision=51476
- Check if the current request type is supported (currently only control is supported, bulk will be implemented soon)
- Fix bug in IUSBRequest::CreateQueueHead
- Code runs now until first device descriptor get request (async / periodic queue not yet enabled)
- mjmartin usbehci status not yet reached
- Let the fun now begin ;)
svn path=/branches/usb-bringup/; revision=51474
- Cache port status & port change settings because it appears that some ehci controllers do not store the status reset register bit correctly
- This commit is a temporary solutions, needs to be reworked
- Return correct status from HandleClassOther
- Handle IOCTL_INTERNAL_USB_SUBMIT_IDLE_NOTIFICATION to return status success
svn path=/branches/usb-bringup/; revision=51473
- Return the physical address of the async queue head in CUSBHardwareDevice::GetAsyncListRegister
- Remove superflous entries from queue head structure, they are processed within IUSBRequest class
- Remove USBHI_GetPortHackFlags, this function has been deprecated
- Add interface functions for IUSBRequest / IUSBQueue
- Callback into IUSBQueue when a hardware interrupt arrives
- Implement callback function to check for completed queue heads / free completed queue head depending on the Async Advance interrupt bit
svn path=/branches/usb-bringup/; revision=51466
- Create member for storing the request object
- Add interface function which is invoked when the queue head should be freed
- Add support functions which deal with completed queue heads
svn path=/branches/usb-bringup/; revision=51440
hub_controller:
- Implement StatusChangeEndpointCallBack called by HardwareDevice class when port status has changed on controller.
- Move Status Change Endpoint query code to IQueryStatusChageEndpoint as it is also needed by StatusChangeEndpointCallBack.
usb_request:
- Implement InternalCreateUsbRequest.
usb_queue:
- Implement CreateUsbRequest and AddUsbRequest
hardware:
- Implement GetAsyncListRegister and GetPeriodicListRegister.
- Implement SetStatusChangeEndpointCallBack for setting callback and context. Call the callback when a port status changes.
- Initialize the UsbQueue after creating the AsyncQueueHead, as the UsbQueue calls will call back with GetAsyncListRegister.
svn path=/branches/usb-bringup/; revision=51407
- Fix warning because comparing signed vs unsigned
- Implement function for retrieving the device descriptor
- Implement function for retrieving a configuration descriptor (including contained interface descriptor and endpoint descriptor)
- Cleanup interface for IUSBRequest:
- When caller initializes IUSBRequest with an IRP, then the operation mode is asynchronously. Therefore when the request is completed, IUSBRequest::ShouldReleaseRequestAfterCompletion will return true, which makes IUSBQueue call Release on IUSBRequest
- When the caller initializes IUSBRequest with an setup packet, the operation mode is synchronously. After submitting the IUSBRequest to queue, the caller should call IUSBRequest::GetResultStatus. This function will then block untill the operation has been completed. However, the caller needs to call Release() as those requests are not cleaned up by the IUSBQueue
svn path=/branches/usb-bringup/; revision=51406
- Initialize the MemoryManager only after allocating a CommonBuffer to pass to it.
- Create a QueueHead to put into the AsyncList Register.
svn path=/branches/usb-bringup/; revision=51402
- hub_controller: Implement Status Change Endpoint for RootHub.
Handling the URB can return STATUS_PENDING, as in the new SCE code. Check for this before completing the Irp.
Uncomment calls to PortStatus, SetPortFeature, and ClearPortStatus now that they are implemented.
- For function receiving a port number check that its not larger than the actual number of ports on the controller.
svn path=/branches/usb-bringup/; revision=51401
- Move USB_REQUEST_SET_FEATURE / USB_REQUEST_GET_FEATURE flags to header file.
- Remove QueueHead and Descriptor creation as its in UsbRequest.
- Move DMACommon Buffer allocation back to UsbHardwareDevice class.
- Implement Port Handling functions GetPortStatus, ClearPortStatus and SetPortFeature.
- Implement GetUSBQueue for returning pointer to UsbQueue and GetDMA to return DMAMemoryManager.
- Fix a typo in one of the defines for Port Register Flags.
svn path=/branches/usb-bringup/; revision=51397
- Use PQUEUE_HEAD as the Head of pending list and Async (Active) list vice using PLIST_ENTRY.
- Implement linking/unlinking a QueueHead to these Head QueueHeads.
- Implement chain linking/unlinking of QueueHeads. Thr plan being to used these functions during DMA operations to pull a number of QueueHeads from the pending list to place into the Async list for execution.
- Will look for optimization in these functions later.
svn path=/branches/usb-bringup/; revision=51390
- Use LIST_ENTRY in QueueHeads and Descriptors vice Next and Previous Pointers.
- Add functions to interface for setting AsyncListRegister and PeriodicListRegister.
- USBHardwareDevice: Initialize USBQueue when handling PNPStart.
- USBQueue: Allocate Common Buffer and use it to Create and Initialize DmaMemoryManager object.
- USBQueue: Implement CreateQueueHead and CreateDescriptor.
svn path=/branches/usb-bringup/; revision=51388
- Update interfaces with new methods needed for UsbHardWare class.
- Remove GetDmaMemoryManager as the DmaMemory will only be needed by UsbQueue class.
- GetDeviceDetails: Only fill in a parameter if its not null.
- Start implementing UsbQueue class.
svn path=/branches/usb-bringup/; revision=51386
- Implement IRP_MN_QUERY_DEVICE_RELATIONS for hub controller object
- Implement stub handler for URB_FUNCTION_CLASS_OTHER, URB_FUNCTION_SELECT_CONFIGURATION
- Partly implement URB_FUNCTION_GET_STATUS_FROM_DEVICE
- Return success from unimplemented USBHI_Initialize20Hub routine
- based on mjmartin usbehci driver
- Tested in Windows XP SP2
svn path=/branches/usb-bringup/; revision=51385
- Setup a default device descriptor for the root hub and initialize it with vendor & product id
- Partly implement URB_FUNCTION_GET_DESCRIPTOR_FROM_DEVICE, URB_FUNCTION_CLASS_DEVICE
- based on mjmartin usbehci
svn path=/branches/usb-bringup/; revision=51384
- Fix bug in CDMAMemoryManager initialization, which calculated the bitmap length wrong
- Create interface IUSBDevice, which will be used to abstract connected usb devices
- Implement support functions for the device interface.
- Implement USBHI_CreateUsbDevice, USBHI_InitializeUsbDevice, USBHI_GetUsbDescriptors, USBHI_RemoveUsbDevice, USBHI_GetExtendedHubInformation, USBHI_RootHubInitNotification, USBHI_SetDeviceHandleData, USBDI_GetUSBDIVersion, USBDI_IsDeviceHighSpeed
- Partly implement USBHI_QueryDeviceInformation
- Based on mjmartin usbehci
svn path=/branches/usb-bringup/; revision=51372
- Implement IDMAMemoryManager interface, with IDMAMemoryManager::Allocate, IDMAMemoryManager::Free
- Fix interface of IDMAMemoryManager
- Will be used by IUSBHardwareDevice
svn path=/branches/usb-bringup/; revision=51369
- Add reference count when the hub controller is created. Necessary to prevent the controller from getting deleted when the hub driver performs interface reference removes
- Implement IRP_MN_QUERY_ID, based on mjmartin ehci driver
- Fix bug in IRP_MN_QUERY_BUS_INFORMATION, it is supposed to return a PNP_BUS_INFORMATION not a simple guid
- Implement IOCTL_INTERNAL_USB_GET_DEVICE_HANDLE, IOCTL_INTERNAL_USB_GET_ROOTHUB_PDO, IOCTL_INTERNAL_USB_GET_HUB_COUNT based on mjmartin ehci driver
- Add interfaces for communicating with the hub driver
- Dispatch internal device requests not wmi requests (EHCI_Dispatch)
svn path=/branches/usb-bringup/; revision=51368
- Change VendorId and DeviceId to the same size as PciConfig members, PUSHORT.
- Add support function GetBusInterface.
- Implement GetDeviceDetails and ResetPort.
svn path=/branches/usb-bringup/; revision=51367
- Add flags for Port Status Control Register and remove structiures for Port Status Control Register.
- Remove USB Status Register and use the flags instead.
- Remove functions that are not used and never will be.
- Implement InterruptServiceRoutine and Deffered Procedure Routine.
- Partially implement port status change to detect device insert and removal.
svn path=/branches/usb-bringup/; revision=51366
- Add flags and structures needed for communicating with controller and handling schedules.
- Add support routines for modifying operational registers on controller.
- Implement getting the controller capabilties, starting and stopping the controller.
svn path=/branches/usb-bringup/; revision=51365
- Create Interface IDispatchIrp which is used to handle ioctl requests
- Partly implement IHubController interface
svn path=/branches/usb-bringup/; revision=51355
- Define tag for allocations
- Fixes assert hit in ReactOS
- Fix typo in IHubController interface declaration
svn path=/branches/usb-bringup/; revision=51353
- Fix IOCTL_GET_HCD_DRIVERKEY_NAME implementation
- Now needs IOCTL_USB_GET_ROOT_HUB_NAME to get further in usbview
- Tested in Windows XP SP2
svn path=/branches/usb-bringup/; revision=51350
- Build fix#1 for mingw
- Define cxa_pure_virtual which is required that gcc is aware that it should really use the libc++ instead of falling back to libc
svn path=/branches/usb-bringup/; revision=51348
- Implement CHCDController::Initialize, CHCDController::HandlePnp for PDO / FDO,
- Partly implement CHCDController::HandleDeviceControl
- Based on mjmartin usbehci sources
- Driver now startups and acquires pnp resources
- Fails in HandleDeviceControl with IOCTL_GET_HCD_DRIVERKEY_NAME when usbview is launched
- Tested in Windows XP SP2 + Vmware Server 2.0.2
svn path=/branches/usb-bringup/; revision=51343
