Implement work-in-progress code that, when upgrading an existing
ReactOS installation, verifies whether the (existing) system registry
hives are valid (by loading & unloading them, this allows using the
built-in repair functionality if needed), or not.
If a given hive cannot be repaired successfully, it is backed up
(with a '.brk' extension, "brk" as "broken"), then is marked up for
recreation.
When all hives have been checked, if there are any hive that needs
to be recreated, we recreate its hive file, mount it, but we do *NOT*
mount the other valid existing hives for update. We create instead
dummy registry hives so that we can actually use, as the update code,
the same one as the one used when fully creating the registry hives
for a clean installation (of course, this choice can be improved later on).
The update code (i.e. the same as the registry clean-install one) then
adds the registry keys & values, either putting them in the dummy
registry hives (the ones that we don't want to recreate) or in the
registry hive that is recreated.
At the end, the (re)created registry hives are flushed back to disk,
and a copy of them (under a '.sav' extension) are created, so that they
can be used for restoration purposes if 2nd-stage (and up) goes berserk.
Extra fixes:
- Use the correct structure member field when initializing the
'InstallDir' variable, when performing an upgrade.
- CreateNestedKey() should be better analysed to see whether it correctly
creates the full registry path compatible with volatile/non-volatile keys
(under inspection).
svn path=/branches/setup_improvements/; revision=75010
Will be used soon to make backups of system files, like the registry hive files just freshly created.
- Make the SetupCopyFile() function closer to its win32 counterpart.
- Adjust the code that calls SetupCopyFile().
svn path=/branches/setup_improvements/; revision=75008
svn path=/branches/setup_improvements/; revision=75009
The rationale is as follows.
We now have the 1st-stage ReactOS setup running with its own registry SYSTEM hive,
similarly to regular ROS running instances (livecd, regular installation...).
The ReactOS-specific SetInstallPathValue() hack, introduced in a76689e9 (r3794)
and 5f973ce0 (r3795), is removed. This hack told the kernel that, during the setup,
it had to "switch" the used registry hives and instead use the ones of the ROS
installation being prepared.
This was really hackish because this means, mixing between registry settings used only
for the setup running instance, that could use different registry settings
than the ones that should be set for the ROS installation being actually performed.
Also, note that in the case of a 1st-stage GUI setup, consisting in running the
LiveCD + the GUI setup program, this situation would be untenable. Note also that
for people willing to use the Setup*** functions exported by setupapi.dll to parse
the registry INF files to initialize the registry of the ROS installation being
prepared, this would be impossible either.
Hence the need to have offline registry modification functionality.
svn path=/branches/setup_improvements/; revision=74766
- Also, reserve a new field to display whether the disk is MBR or GPT-initialized.
- Adjust the code that used the "STRING_HDDINFOUNKx" string labels.
The extra slot added to some of the strings is to indicate whether the disk is MBR or GPT.
As attentive readers will notice, the code that "determines" whether the disk is either MBR or GPT
is of course just temporary: it's just a placeholder code that should currently just show "MBR".
Having the NoMbr flag mostly signifies that the disk is uninitialized. A GPT disk also has a MBR
but it's for "backcompatibility" / "protective" reasons (so that MBR-only tools would see the disk
as just a big 1-partitioned only disk with which they could barely do anything). A real involved test
for the nature of the disk should involve calling the correct IOCTLs in the disk detection code in partlist.c .
This is for the future (and when ReactOS will better support GPT disks).
svn path=/branches/setup_improvements/; revision=74614
svn path=/branches/setup_improvements/; revision=74615
- The "intro" page is renamed into the "Welcome" page, because its corresponding resource indeed is the welcome screen;
- Because the "setup start" page can only be displayed once, move it out of the while-loop, and use its result as the initial value of the 'Page' variable.
- Remove unneeded _PAGE_NUMBER_DEFINED guards;
- Add a DPRINT in the RepairUpdateFlag case of RegistryPage() (because we don't implement yet a correct upgrading or repairing of the registry).
- In InstallIntroPage(), display the page itself only if needed (i.e. after all the validation checks & repair/update or unattended checks are done). Similar modifications are done also in DeviceSettingsPage(), SelectPartitionPage()
- Turn both CheckUnattendedSetup() and UpdateKBLayout() into static functions.
- Fix the code of ScsiControllerPage() so that it can be compiled if needed, and add a dummy OemDriverPage().
svn path=/branches/setup_improvements/; revision=74575
Fixes in particular a regression brought by 57402ee (thanks George Bisoc
for having noticed this), where the BTRFS bootsector code could not be
installed anymore.
CORE-15192
- Fix the usage of the BootEntry's "Version" member.
- Don't surround with too many quotation marks the "friendly" boot entry name in AddBootStoreEntry().
svn path=/branches/setup_improvements/; revision=74964
In particular the helper functions CreateCommonFreeLdrSections() and (Un)protectBootIni() are now removed from there (they are used in bldrsup.c only).
This should pave the way for future integration with other sorts of NT boot loaders (BootMgr and (u)EFI boot loader).
svn path=/branches/setup_improvements/; revision=74954
- Convert almost all swprintf() into StringCchPrintfW() and wcscpy() into StringCchCopyW();
- Explicitly add a trailing path separator to the "\Device\HarddiskX\PartitionY(\)" paths
when they refer to FS directories (and not to partition objects);
- Remove useless (and half-buggy) "Remove trailing backslash" code.
With that, it is possible to install ReactOS in e.g. C:\ReactOS (as usual), C:\ReactOS\dir1\dir2 (as many dirs as you wish), and also in C:\ (yes yes!).
But in that latter case, a strange bug related to the registry arises...
Additionally:
- Adjust some comments;
- Add some debugging DPRINTs;
- The SetInstallPathValue() is part of the big hack I've mentioned in f51faa4a (r74709).
svn path=/branches/setup_improvements/; revision=74717
Also, trim any potential trailing path separator from the NT disk partition path before opening the partition object itself for read/write access.
svn path=/branches/setup_improvements/; revision=74715
- Add the MUI ID resource.
- Implement the shutdown timeout progress bar function and the TimeOut string handler.
- Add the resource string to other resource languages.
- Simplify the usage of the PUPDATE_PROGRESS callback.
- Add the possibility of specifying an initial non-zero StepCount when
creating the progress-bar (using the -Ex version), so that it can be
initially drawn with the expected initial count.
Of course ProgressSetStepCount() can continue to be used.
Updated the font substitutions to use the new Hebrew glyphs in the updated Tahoma font.
Also added substitution for the Ubuntu font to make the Lautus and Modern themes legible with Hebrew UI elements.
Follow up to PR #789 and #790 ; CORE-14880, CORE-14943
Improve the progress bar functions:
- Add a member in the struct, which will be used as a bar colour parameter for the new CreateProgressBarEx().
- CreateProgressBar() which will now invoke the Ex variant without the additional parameter.
- Improved Italian translation for USETUP, WELCOME, REACTOS, EXPLORER.
- Completed translation in SYSSETUP.
- Correct some characters encoding and text alignment in USETUP.
DIRECTORY_ALL_ACCESS is not the correct flag, because it is used with the NtCreateDirectoryObject API
that creates virtual "directories" in the NT object namespace; that's not our purpose here.
svn path=/branches/setup_improvements/; revision=74716
- Use NT string safe functions.
- Add support for other bootloaders;
- Update a couple of comments;
- Remove deprecated __REACTOS__ #ifdefs.
svn path=/branches/setup_improvements/; revision=74713
- Remove a redundant NtClose() call;
- Return failure if NtQuerySymbolicLinkObject() fails;
- Use RTL_CONSTANT_STRING and RtlInitEmptyUnicodeString() where needed;
- Reduce code indent level;
- Add old-style function annotations;
- Remove the deprecated code copyright notice, since the copyright in usage is already reported in the COPYING file in the top level ReactOS source code directory.
svn path=/branches/setup_improvements/; revision=74698
- Adjust also its callers, adjust OpenAndMapFile() parameters.
- Related to that, simplify IsValidNTOSInstallation() parameters & introduce a IsValidNTOSInstallation_UStr()
that does the same, but takes a UNICODE_STRING instead.
- Simplify CheckForValidPEAndVendor().
Now only exactly 5 calls use the "old" 'DoesFileExist' syntax, using a temporarily auxiliary function "DoesFileExist_2"...
svn path=/branches/setup_improvements/; revision=74641
This allows building concatenated paths with an arbitrary number of separated components.
- Use the newly-introduced CombinePaths() and ConcatPaths() functions.
- Fix also few comments, and place some UNICODE_NULLs here & there.
svn path=/branches/setup_improvements/; revision=74637
svn path=/branches/setup_improvements/; revision=74640
- filesup.c's functions ConcatPaths(), Does[Path|File]Exist(), NtPathToDiskPartComponents(), OpenAndMapFile(), UnMapFile();
- Move the inicache library to setuplib as it'll be used for the 1st stage GUI setup too (indeed, there is no good INI file API
under Win32; the Win32 profile "API" is just good enough to manipulate the win16 ini files, and are here anyways for backward
compatibility purposes only);
- Move the OS detector too.
- Remove the duplicated ConcatPaths() code in arcname.c.
svn path=/branches/setup_improvements/; revision=74634
svn path=/branches/setup_improvements/; revision=74638
- In the partlist.c disk getters: Remove useless "IsListEmpty(&List->DiskListHead)" checks, because this is actually the kind of check the while() loop does just after...
- Fix few DPRINTs.
svn path=/branches/setup_improvements/; revision=74629
- Improve FindExistingNTOSInstall() so that we can find an existing installation either by system root
ARC path or NT path. This is used during the enumeration of available installations from the boot.ini/freeldr.ini
and during other existence & validity checks of NTOS installations.
- Improve AddNTOSInstallation() so that we can save the system root ARC path and NT path of the installation,
as well as its partition entry structure pointer, for caching & later retrieval purposes.
- Remove some deprecated comments & todos, and implement other todos.
- Improve the output of some DPRINTs.
- Fix the return value of FindSubStrI.
svn path=/branches/setup_improvements/; revision=74632
In all the disks/partitions available, it searches for the presence of freeldr.ini / boot.ini, open & parse them,
and enumerates the available boot entries (as candidates for installations). For each of them, it maps their ARC paths
into the NT namespace (hence the ARC 2 NT path resolver committed in r74621), then attempts to detect in these paths
the existence of NTOS installations.
svn path=/branches/setup_improvements/; revision=74622
The aim is to use this detector to be able to detect and select an existing installation of ReactOS for upgrading.
The user then could either select one, or skip this step and perform a regular ReactOS installation.
What remains to be done, is to parse the NTOS loader configuration files (freeldr.ini in ReactOS' case, or boot.ini in Win2k3's case, etc...)
to retrieve the actual installation paths. So far these are currently hardcoded for testing purposes only.
The detector attempts to distinguish between ReactOS and Windows installations by checking at the company name vendor of the ntoskrnl.exe & ntdll.dll files,
so that only ReactOS installations are allowed to be upgraded.
svn path=/branches/setup_improvements/; revision=74527
svn path=/branches/setup_improvements/; revision=74550
From the existing IniCacheLoad() function, introduce a IniCacheLoadFromMemory() function that just does the same (initialize an INI file cache and parse the INI file), but takes the input from a memory buffer. Then, rewrite the IniCacheLoad() function to just open the file given in input, and then fall back to calling IniCacheLoadFromMemory.
The IniCacheLoadFromMemory() function will be used later.
svn path=/branches/setup_improvements/; revision=74620
- Add a NtPathToDiskPartComponents() helper, that takes in input a fully qualified NT path to a file on hard disk,
e.g.: \Device\Harddisk1\Partition2\foo\bar, and returns in output the disk number ('1'), the partition number ('2'),
and the the path component "\foo\bar" that is after the device-harddisk-partition identifier.
- Make the OpenAndMapFile() return the file size of the opened file.
Both of these additions will be used soon.
- Turn a isspace() call into a iswspace() one.
svn path=/branches/setup_improvements/; revision=74619
- Use the previously-introduced 'PreparePartitionForFormatting()' function; set the FormatState of the newly-formatted partition to Formatted.
- Remove the hackish call to CreateFileSystemList() in SelectFileSystemPage().
- Move 'TempPartition' and 'FormatState' back to USETUP.
- Put large "case"-blocks into brackets.
svn path=/branches/setup_improvements/; revision=74575
svn path=/branches/setup_improvements/; revision=74576
- Add a PreparePartitionForFormatting routine that sets the partition ID depending on the chosen filesystem.
- The 'FORMATMACHINESTATE FormatState' machine-state and the 'TempPartition' members of the partition list structure is purely a USETUP convenience, so remove them from the PARTLIST structure and move them back into USETUP.
- Attempt to recognize the filesystem (set the 'FileSystem' member of PARTENTRY) of partitions we are adding into the PARTLIST list.
- Fix the return value of the SelectPartition function, which is by the way completely broken (it doesn't do what it is supposed to do; alternatively its naming is completely wrong...).
svn path=/branches/setup_improvements/; revision=74572
svn path=/branches/setup_improvements/; revision=74573
- Create the beginnings of a "setuplib" library, whose aim is to be shared between the (currently existing) 1st-stage text-mode installer, and the (future) 1st-stage GUI installer.
- Finish to split the GenList and PartList codes into their UI part, which remain in usetup, and their algorithmic part, which go into setuplib.
- Move SetMountedDeviceValue into the PartList module.
- Split the FileSystem list code into its UI and the algorithmic part (which goes into setuplib under the name fsutil.c).
* The algo part is meant to be able to manage the filesystems available on the running system, similarly to what is mostly done (in scattered form) in fmifs, format, chkdsk / autochk codes...
It also manages the partition filesystem recognition, using OS routines.
* The UI part manages the FS list as it appears on screen, showing only the possible FSes that can be used to format the selected partition (a bit similar to what we do in the shell32's drive.c, etc...).
- Adapt the calling code to these changes.
- Remove some "host" code that was dating back from the dark old times.
svn path=/branches/setup_improvements/; revision=74570
svn path=/branches/setup_improvements/; revision=74659
This will allow to reuse it for the 1st-stage GUI setup too, while using another UI representation.
Add also two partition iterator functions: GetNextPartition and GetPrevPartition.
svn path=/branches/setup_improvements/; revision=74554
The aim here is to decouple the UI-specific code from code that can be used by both the text-mode USETUP and a future 1st-stage GUI setup.
Indeed, the GenLists can actually be used in the 1st-stage GUI; and their contents be displayed inside ListBoxes/ListViews... (this is just one example amongst others).
Additionally (in usetup.c):
- Make both FormatPartitionPage and CheckFileSystemPage return PAGE_NUMBERs.
- Improve a couple of comments.
svn path=/branches/setup_improvements/; revision=74553
- Allow retrieving the number of items existing in the list;
- Fix the name of some function parameters.
svn path=/branches/setup_improvements/; revision=74547
- Document more some of the fields in the PARTENTRY, DISKETNRY and PARTLIST structures;
- Remove the redundant members "SystemDisk", "OriginalSystemDisk" and "TempDisk" in PARTLIST as these can be consistently deduced from the corresponding (Original)(System)(Temp)Partition members
(note that we however keep "CurrentDisk" alongside "CurrentPartition", see the comment in the code why we do it so).
- Adjust the rest of the code to take the removal of the redundant members into account. The 2nd parameter of GetNextUnformattedPartition() and GetNextUncheckedPartition() is now really optional.
- Introduce a SetPartitionType() helper to simplify the code that sets the partition type, which also automatically adjusts other internal variables of said partition in accordance.
- "Mounted" logical drives can have assigned letters too, registered in \DosDevices\.
svn path=/branches/setup_improvements/; revision=74532
- Use explicit ansi string safe functions (where they are used ansi, but not explicitely);
- Add (old-school) function parameters annotations;
- Use PARTITION_ENTRY_UNUSED where needed (instead of hardcoding its value);
- Turn some functions static to this module;
- Turn the 2nd parameter of both GetNextUnformattedPartition() and GetNextUncheckedPartition() optional (for next commit);
- Improve some comments;
- Use NT types.
svn path=/branches/setup_improvements/; revision=74531
- Introduce code that detects the filesystem of a (mounted?) partition, using NtQueryVolumeInformationFile() with FileFsAttributeInformation class,
aka. rely on ReactOS itself (kernel, storage stack, filesystem drivers...) to recognize the FS on a partition that should normally be seen by the system.
This currently half-works for whatever reason (to be insvestigated), while it works on Windows.
- Fix few comments & a function parameter name.
- Use NT string pointer types.
svn path=/branches/setup_improvements/; revision=74529
- ConcatPaths that concatenates paths (or a path and a file name);
- OpenAndMapFile (resp. UnMapFile), whose purpose is to open a file and map it in memory (resp. unmap it from memory).
- Add extra optional parameters to DoesPathExist and DoesFileExist: an optional "RootDirectory" handle and, for DoesFileExist only, an optional PathName.
- Close the opened file handles only on success.
svn path=/branches/setup_improvements/; revision=74528
svn path=/branches/setup_improvements/; revision=74538
svn path=/branches/setup_improvements/; revision=74549
- Path must not contain whitespace characters.
- Path must be at least 2 characters long.
- Path must start with a backslash.
- Path must not end with a backslash.
- Path components must not end with a dot.
CORE-9529
This avoids the open failing on certain file systems where GENERIC_WRITE access would be denied
for a readonly file.
This is an addendum to 82f44a2.
CORE-14158
In such situation, try to drop the readonly attribute before overwritting the file.
This fixes setup not being able to overwrite FAT bootcode when reusing a FAT partition
already installed without reformatting.
CORE-14158
it only perform a full check if dirty bit is set (which should never happen *cough*).
This is needed because otherwise, ReactOS installation takes forever when IopParseDevice is gone
due to slow ChkDsk.
