Git has the ability to track the person who
creates a commit separately from the person
who wrote the commit. For git9, we ignored
this feature.
However, as we start using git/import more,
it will be useful to figure out who imported
a commit, as well as who wrote it.
This change adds support for seeing this
information in git, as well as setting the
author and committer separately in git/import.
Target generation is revised, split into $YTARG and $TARG.
$PROGS is inlined to the cmd target.
%.cpus is added to allow chaining: mk all.cpus
$POWERLESS is added, since dtracy doesn't build yet on ppc.
$DIRS regexp is simplified, simplifing $NOMK.
$cpuobjtype is replaced with cp's recipe for copying itself on $cputype.
$APEDIRS is removed.
The none target is renamed to usage, since it prints out usage.
The ape target is removed.
The dirs target is replaced by all.dirs
%.directories is replaced by %.dirs
The all target serializes directories after cmds to match the install target recipe.
All regexp rules are replaced with nonregexp versions for clarity.
The &:n: rule is removed. Just build the $O.$cmd file.
.y files now build .c files, not .tab.c files, and remove (bc|units|mpc|pc).c:R:
All safeinstall rules are removed.
The cleanfiles rule is renamed to cleancmds and simplified.
%.clean is removed. Just use mk cleancmds.
The install rule serializes cp and yacc before building anything else, avoiding races.
The installall recipe is simplified with the install.cpus prereq.
%.installall is removed. Just use mk $cmd.install.cpus
The $O.cj, %.update, and compilers rules are removed.
openssh now disables RSA/SHA-1 by default, so using RSA/SHA-1 will
eventually cause us problems:
https://undeadly.org/cgi?action=article;sid=20210830113413
in addition, github will disable RSA/SHA-1 for recently added RSA keys:
https://github.blog/2021-09-01-improving-git-protocol-security-github/
this patch modifies ssh.c to use RSA/SHA-256 (aka rsa-sha2-256)
instead of RSA/SHA-1 (aka ssh-rsa) as the public key algorithm.
NOTE: public rsa keys and thumbprints are ***NOT AFFECTED***
by this patch.
while we're here, remove the workaround for github.com. it seems
that github has fixed their implementation, and does not look into
macalgs when we're using an aead cipher.
---
remove old /sys/src/games/nes/joynes in favor of joy(1).
joy(1) has more buttons for the other emulators; there is
no longer a significance in the order of the keys.
document nusb/joy, add information in each emulator manpage.
> This patch enables use of the igfx controller rather than vesa on the
> eeepc1005ha netbook. This means using the full screen resolution of
> 1024x600.
> *Andrew Eggenberger*
Per the docs:
the sender SHOULD include a LF, but the
receiver MUST NOT complain if it is not
present.
I typoed away the SHOULD, and got missed the
MUST NOT.
thanks qbit.
the subst utility no longer supports a '-g'
flag, but this was left behind in commit;
this means that the lines listing modified
files were not correctly commented in the
commit header.
This is mostly harmless, but when using an
editor like sam to edit the commit message,
the modified lines would have to be removed
manually.
was testing out the git/import tweaks and accidentally
pushed this commit. No comment on whether we want it,
but it definitely wasn't ready for merge.
Oops.
Often, people (including myself) will write emails that
can almost be applied with git/import. This changes
git/diff and git/import so that things will generally
work even when assembling diffs by hand:
1. git/import becomes slightly more lax:
^diff ...
^--- ...
will both be detected as the start of a patch.
2. git/diff produces the same format of diff
as git/export, starting with paths:
--- a/path/to/file
+++ b/path/to/file
which means that the 'ape/patch -p1' used
within git/import will just work.
So with this, if you send an email to the mailing list,
write up a committable description, and append the
output of git/diff to the end of the email, git/import
should just work.
[this patch was send through the mailing list using the
above procedure, and will be committed with git/import
to verify that it works as advertised]
2021-08-14 17:50 GMT, kemal <kemalinanc8@gmail.com>:
> 1- as driver reads 8 bytes from nvm instead of 6 so fw doesn't
> spit us an ADVANCED_SYSASSERT, it was reading 2 more
> extra bytes. apparently those 2 extra bytes were put to
> the first 2 bytes of our buffer, so we got to skip that.
some more thoughts on this, i think as 0x15*2 is not multiple
of 8, fw rounds the offset to 0x14*2. i have touched to code
to read data from 0x14*2 then ignore the first 2 bytes, just
so it's not confusing. if this causes mac to be read wrong again,
report.
also, some more changes:
1. set the fwname at iwlpci, just to align the behavior with 8000+.
this is a cosmetic change.
2. i have discovered that on device boot/reset/shutdown functions,
our driver slept way much more than it should. the reason for that is,
driver used the function delay() on places where it needs to use
microdelay() instead. i have modified the code to use microdelay().
wpi likely needs similar changes too. i hope that this does not
break the code.
3. zzz a bit more on tx/rx scheduler shutdowns and niclock.
4. openbsd's iwm and linux apparently does not check if ownership
was obtained anymore in their handover functions. instead they
just loop until the hw is ready. aligned the behavior.
see linux commit: 289e5501c3141191dd830957f1d764d3dc14a54f
5. don't take antenna masks from nvm. it's apparently empty
in some cards from 7k family. we will rely on what the fw file gives
us.
6. when the calibration is completed, wakeup the proc that runs
postboot. otherwise that thing sleeps for like 2 whole seconds
even if calibration completed earlier.
i honestly don't think any of these changes will fix 7260 not
being able to get calibration results, but i don't see anything
wrong at all in postboot7000 at this point. i will just hope
these changes somehow make it get calibration results.
NOTE: latest patch on the 9front ml, posted Mon, 14 Feb 2022 15:26:55 +0300
(non functional as of yet)
Some gba cartridges use flash chips produced by a few different
manufacturers for backup memory. A game rom may then try to read the
device id for its flash chip and break if it's the wrong one. There's
no way for us to know which chip is supposed to be there, save for
looking it up in some database. These chips are either 64k or 128k
big. gba(1) hardcodes the id for the SST 64k chip, but games like the
Pokémon ones use a 128k Macronix chip and expect a different id,
completely breaking them.
This patch sets a different default for 128k flash backups, and gives
the ability to set the exact type when creating the save file if it's
really necessary. This new default fixes the Pokémons. The type is
saved in the save file, but this will *not* break existing ones. It
may be that we don't need to worry about the type and just have an id
that corresponds to the right chip size, which is why these defaults
make sense, but I haven't tested more than a dozen roms, mostly since
I don't really know which games use 128k flash.
Before applying this patch the following will fail to open ed
in the '/tmp/s p a c e' folder:
<snip>
% mkdir '/tmp/s p a c e'
% window -cd '/tmp/s p a c e' ed
!pwd
/tmp/s p a c e
!
q
<snap>
After applying the patch the above sequence works as expected,
opening ed in the '/tmp/s p a c e' folder, printing the present
working directory, and quitting ed.
The root cause was a faulty computation of the pointer `s`,
being off by one, leading to any arguments after the
directory path to be skipped.
This regression was introduced in revision:
• 614f1d6268
Thanks umbraticus for finding and reporting the issue.
The device address is highly variable and depends on
all prior enumerated devices.
This can happen with some devices that do not have
a serial number and all devices of the same type
having the same hname.
Using a counter of collisions per hname makes more sense
and is more stable (given that the order devices are
enumerated is deterministic).
This allows mapping incoming filenames to a different name
using regular expressions, followed by subtitutions
of the %[ICE] format strings.
I needed this to have individual cmdline.txt files for
netbooted raspberry pi's. In this example, i map cmdline.txt
to %C, which gets substituted for /cfg/pxe/$ether of the client.
When grep gets a single file argument, it does
not show the file name. This makes seeing the
file name in the output of 'g' difficult.
Pass a spare /dev/null to each invocation of g,
in order to force it to show the file name.
The transitional PCI device ID for block devices is 0x1001, and the
virtio spec says that devices must have the transitional device ID or
0x1040 + the virtio device ID (2).
Mothra does not currently render text inside <samp> tags inline
similar to <code>, but instead treats them like <pre> which is actually
incorrect behavior. The following small patch should fixes issue.
Sometimes, there is the one-off occation when one needs to
pass a huge list in rc...
This change makes devenv track total memory consumption
of environment groups allowing them to grow up to 1MB in
size (including overhead).
(Before, only the variable size was restricted, but
not the amount of files being created).
The maximum value size of a single environment variable
is set to half of the total size, which allows the
occational large value. (But not many of them).
Because we track all memory consuption, it is also
now possible to create around 10k small environment
variales.
A hashtable is added for name lookups and the qid.path
was changed to allow direct indexing into the entry
array without needing a scan lookup.
All smalloc() calls have been removed, exhaustion is
handled with error(Enomem) avoiding deadlock
in case we run out of kernel memory.
This does not have any adverse effect, since yylex never calls mpatov
with a string with leading 0 (and not 0x) that contains non-octal
digits, but the condition was wrong regardless.
Strings for existing codes in the most used server (OpenSSH) just
repeat the error code name. OTOH we like to have wording of the
strings under our control as much as possible, so we can easier find
and process them. Error strings are still usefull as fallback for
compatibility with future versions of the server.
- fix showpage1 only decrementing proc counter once limit is reached;
this blocked having more than one loadpages process after NPROC calls,
since the next one has to wait until the last has exited
- allow procs to skip pages currently being loaded by others; this
forced processes to wait for each other at the same page
- bump NPROC from 4 to 8
- (hack) immediately fork a few times after adding all pages at
startup to force loading a batch of pages in parallel
To avoid a MAXMACH limit of 32 and make
txtflush into an array for the bitmap.
Provide portable macros for testing and clearing
the bits: needtxtflush(), donetxtflush().
On pc/pc64, define inittxtflush()/settxtflush()
as no-op macros, avoiding the storage overhead of
the txtflush array alltogether.
