cinap_lenrek
ce69208641
igfx: support for X200 (thanks bigato)
2015-01-12 03:09:58 +01:00
cinap_lenrek
90c1959fc4
igfx: properly turn vga monitor off
2015-01-12 02:10:00 +01:00
cinap_lenrek
34f2e1eaf6
igfx: aaand vga support for x200s :-)
2015-01-12 02:04:13 +01:00
cinap_lenrek
9b28b2d97b
igfx: vga support on x230, fix fdi link setup, LG Flatron L1730P vgadb entry
2015-01-12 01:51:51 +01:00
cinap_lenrek
773f1c5f6a
fix missing games/gba target in mkfile (thanks qu7uux)
2015-01-12 00:02:15 +01:00
cinap_lenrek
01a1d96315
igfx: only use mmio... left from debugging
2015-01-11 04:03:14 +01:00
cinap_lenrek
21b0bafd10
igfx: cleanup
2015-01-11 03:44:56 +01:00
cinap_lenrek
b4fcd2d68f
merge
2015-01-11 03:37:07 +01:00
cinap_lenrek
2cdadb1b2f
igfx: get edid information from lvds
2015-01-11 03:35:30 +01:00
mischief
a4650bdf83
ip/ipconfig: set ndb database file with -f argument
2015-01-10 11:27:45 -08:00
stanley lieber
4dfcb4791b
xargs(1) man page: rewritten -> implemented
2015-01-10 13:48:18 -05:00
stanley lieber
cbca753f00
xargs(1) man page: add HISTORY (thanks, jpm_)
2015-01-10 13:46:47 -05:00
cinap_lenrek
6e67b04a1f
igfx: use mmio to access registers instead of pio, fix wrong igfxmmio segment size
...
initially, pio was used to access registers so i didnt need
a kernel driver for initial testing.
pio does not work under efi, so use mmio to access registers.
2015-01-10 03:07:29 +01:00
cinap_lenrek
7c3736a16a
merge
2015-01-10 02:16:50 +01:00
cinap_lenrek
8d8935618c
igfx: perserve frame start delay "magic" bits 27:28 in pipe conf register
...
it turns out, the "magic" bits 27:28 are the frame start
delay setting that need to be preserved.
2015-01-10 02:15:30 +01:00
mischief
f6a9db1bd9
libdraw: don't redraw input box in enter/eenter when mouse is moved outside the rectangle
...
prevents some flickering when devdraw is used over a high latency connection.
Fixes issue 236
2015-01-09 15:41:00 -08:00
cinap_lenrek
79ff9d28bd
igfx: vgadb entries for x230 and x200s
2015-01-10 00:19:16 +01:00
cinap_lenrek
15590e39c6
igfx: implement hardware cursor
...
this can even be used with the vesa driver, just
enable the cursor after mode switch like:
echo hwgc igfxhwgc >/dev/vgactl
2015-01-09 22:23:25 +01:00
cinap_lenrek
cf76346b37
igfx: fix some comments
2015-01-09 03:18:44 +01:00
cinap_lenrek
35ad5c9136
igfx: aaaand the kernel part :(
2015-01-09 03:03:23 +01:00
cinap_lenrek
ce8db466ba
igfx: just kidding, heres the code :)
2015-01-09 02:58:14 +01:00
cinap_lenrek
6fe180657f
igfx: work in progress intel graphics driver
...
this driver can modeset lvds on x200s and x230.
everything else is completely untested.
no hardware cursor implemented.
no vgadb entries are provided.
2015-01-09 02:55:12 +01:00
cinap_lenrek
212db4135d
merge
2015-01-09 02:45:14 +01:00
mischief
97d6d9ddaa
vncs: add -A for no auth to usage
2015-01-06 20:13:16 -08:00
mischief
1bd467fc0e
vncs: turn off auth with -A, do not require -c for -x
2015-01-05 20:21:40 -08:00
mischief
654450bc1d
vnc: put newlines in verbose messages
2015-01-05 20:02:01 -08:00
cinap_lenrek
ef9c5b4cc7
pool: more strict checktree() for poolcheck
...
check that Free.next and Free.prev pointers are not nil.
check that Free.left and Free.right are Poison in non-tree nodes.
check that Free.left and Free.right are *not* Poison in tree nodes.
change Poison to 0xffffffffcafebabe for 64bit machines.
2015-01-05 14:23:01 +01:00
cinap_lenrek
384d4d2d62
sdide: add vid/did for 82801IIH Intel Q35 IDE controller (thanks kenji)
2015-01-04 12:49:44 +01:00
cinap_lenrek
5b24195a0a
sdiahci: sanitize ahci pci bar
...
make sure the ahci pci bar is not in i/o space and has
the right size. also make sure Aport registers are within
the ahci bar range.
2015-01-04 04:26:58 +01:00
cinap_lenrek
b5008f3b56
devvga: disable hardware blanking when switching drivers, check softscreen
...
we have to reset hwblank when switching drivers to
prevent the generic vgablank() to be called by
blankscreen().
remove code setting hwblank from vga drivers as
devvga will always force hwblank to be 1 or 0
depending on if the driver provides a native blanking
routine.
set hwaccel to 1 when the driver provides native fill
and scroll routines independent of softscreen being
disabled. this allows hw acceleration to be used when
softscreen gets switched off.
2015-01-03 18:33:35 +01:00
stanley lieber
ce2e8e5687
lucidasans font: restore remaining truncated *unicode.*.font files
2015-01-02 22:56:12 -05:00
stanley lieber
60e56f9b52
lucidasans font: restore truncated unicode.*.font files (thanks, mischief)
2015-01-02 22:53:59 -05:00
mischief
1b4b4e89aa
bin(2): fix tab formatting
2014-12-31 23:45:05 -08:00
ftrvxmtrx
a053d902db
aux/realemu: remove unused global
2015-01-02 19:07:40 +01:00
ftrvxmtrx
753bb6b87a
aux/vga: revert vbegetmode
2015-01-02 19:07:01 +01:00
cinap_lenrek
68b8351f8c
devdraw: remove broken color palette blanking
...
the code did not work as drawactive() was called with
the drawlock held. instead of fixing, the code for
palette blanking has been removed.
2015-01-02 18:48:22 +01:00
cinap_lenrek
6cb93914f2
devvga: better way to prevent blank hwaccel race
...
don't hold drawlock duing vga enable and disable, but just zero
the function pointers under drawlock *before* disabling the vga
device.
holding the drawlock while calling out into enable and disable
is not a good idea. with vgavesa, this might deadlock when
userspace realemu tries to print in a rio window with vgavesa.
2015-01-02 17:07:47 +01:00
cinap_lenrek
9aec87c46c
vgavesa: get rid of the vesa kproc
...
in 9front, screen blanking is always initiated from process context,
so there is no need for a kproc anymore.
care has been taken for the race between vesadisable() and vesablank()
by acquiering the drawlock prior calling scr->dev->enable() and
scr->dev->disable(). this also has the side effect of accelerated
fills and scrolls not being called during device disable.
2015-01-02 15:29:15 +01:00
ftrvxmtrx
7848fe5970
aux/vga: do not set mode 3 unless connected
2015-01-02 13:29:58 +01:00
ftrvxmtrx
8b9badd6a6
aux/vga: fix switching with different mode
...
Prior to switching display, switch to text mode 3, which
is supported by anything, then set display, search for the
desired mode, load it if found. If not found, set the display
to the old one and switch to the old mode back.
2015-01-02 13:24:27 +01:00
cinap_lenrek
96595f5101
nedmail: do not recursively plumb email multipart attachments in print command
2015-01-02 12:05:35 +01:00
ftrvxmtrx
c5da8810ee
nusb/kb: fix alt/altgr being swapped for some reason
2015-01-01 22:53:17 +01:00
ftrvxmtrx
f1b1e0d637
aux/vga: display switching for Intel adapters
...
Magic was discovered by abusing INT 10 on several machines
while switching cables back and forth and watching the end result.
2015-01-01 16:19:24 +01:00
cinap_lenrek
9e45c8bc9b
zynq: differentiate various pagefault types in faultarm()
2015-01-01 11:32:00 +01:00
ftrvxmtrx
04efb3a4a3
tcs: update charsets. Fixes issue #214
2015-01-01 11:20:23 +01:00
cinap_lenrek
6adf8466a2
hjfs: fix missing superblock dirty mark when reaming
2015-01-01 23:18:07 +01:00
aiju
941912f5ff
hjfs: make -m default 4 MB instead of 40 KB
2014-12-31 20:04:10 +01:00
stanley lieber
cfc0a3b904
terminus font: update .font files, remove references to old vga bitmaps
2014-12-30 01:17:26 -05:00
stanley lieber
96b09e8c3d
lucidasans font: update font files, remove references to old vga bitmaps
2014-12-30 23:44:06 -05:00
stanley lieber
cb95db4f68
germgoth/unicode.12.font: update mappings, remove references to old vga bitmaps
2014-12-30 18:27:25 -05:00
