- remove redundant flushimage() calls before readmouse()
- remove flushimage() calls for allocimage(),freeimage() and originwindow()
this is experimental. it will break allocimage() error handling unless the
caller does explicit flushimage() calls, tho the gains
in usability over high latency connections is huge. in most cases, programs
will just terminate when encountering these errors.
both server and client need to be convinced that the connection
is broken for a connection reestablishment to happen as the server
will only start looking for incoming clients when the connection
already broke. so use the 8 second interval sync messages
to check for connection lifeness. if we miss two syncs in time,
we declare the connecton to be broken and will try to reconnect.
k0ga reports:
Hello,
While I was setting my pppoe conexion with my ISP
I discovered several problems in ip/pppoe. I used
the command line ip/pppoe -A '' ether0 and I got
this:
...
dropping unwanted pkt: wrong ac name
panic: D2B called on non-block dc10 (double-free?)
note rcved: sys: trap: fault read addr=0x0 pc=0x000066e1
pppoe 1013: suicide: sys: trap: fault read addr=0x0 pc=0x000066e1
cpu% acid 1013
/proc/1013/text:386 plan 9 executable
/sys/lib/acid/port
/sys/lib/acid/386
acid: stk()
abort()+0x0 /sys/src/libc/9sys/abort.c:6
ppanic(p=0xd1b8,fmt=0xc7f9)+0x146 /sys/src/libc/port/malloc.c:166
D2B(p=0xd1b8,v=0xdc10)+0x57 /sys/src/libc/port/pool.c:926
poolfreel(v=0xdc10,p=0xd1b8)+0x20 /sys/src/libc/port/pool.c:1152
poolfree(p=0xd1b8,v=0xdc10)+0x3b /sys/src/libc/port/pool.c:1287
free(v=0xdc18)+0x23 /sys/src/libc/port/malloc.c:250
clearstate()+0x1b /sys/src/cmd/ip/pppoe.c:328
pppoe(ether=0xdfffefc1)+0x123 /sys/src/cmd/ip/pppoe.c:426
main(argv=0xdfffefa0,argc=0x1)+0x89 /sys/src/cmd/ip/pppoe.c:100
_main+0x31 /sys/src/libc/386/main9.s:16
acid:
clearstate() is called in pppoe.c:424, and it frees acname and sets it
to nil. pktread() is called in pppoe.c:434 with parameter wantoffer,
which frees acname again in line pppoe.c:360 but doesn't set it to
nil, so clearstate() makes a double free in the next iteration.
for version <= TLS1.1, there is no sigalg field in the ServerKeyExchange
message and the signature digest algorithm is fixed to md5+sha1 and we
only support RSA signatures (TLS1.1 doesnt know about ECDSA).
this allows running kbdfs under kbdfs :-)
going use this in new drawterm. drawterm provides the initial
/dev/kbd, but only sends rune up/down messages (keeps it simple).
the servers kbdfs reads that and exports itself the full
set of files, similar to what we do in vncs. this also
provides note processing.
the dns file service can be restarted, which causes it to forget
all fid state. given the simple file system structure of the dns
service (just a single dns file), we can assume that rpcs
on a unknown fid refers to the root, so the mountpoint will stay
valid and /net/dns can be reopend avoiding the need for a remount
of the dns service after restart.
The execexec() function should never return, as it irreversably changes
the filedescriptor table for the new program. This means rc's internal
filedesciptors for reading the script get implicitely closed and we cannot
continue the rc interpreter when Execute() fails. So Execute() now sets the
error status, and execexec() runs Xexit() in case Execute() returns.
when we look up role=speakfor key and askforkeys is set, the
findkey() can return RpcNeedkey, which causes us to skip the
query for a role=client key. Instead, we now check for the
return value != RpcOk (and != RpcConfirm which we want to
handle the same for both queries).
we have to free the attribute lists when returning RpcConfirm.
the ini buffer was not reset when we got eof in the message
body read causing a endless loop. instead of defining our
own read9pmsg() function, just handle the first read specially
when we consumed the first 4 bytes for the "impo" protocol
escape check.
this code was if(0) for a long time due to wrong parentesis,
fixed parentesis cause print spam on some machines making them
unusage (kenji okomoto). removing the check alltogether.
this is a reimplementation of cpu and import utilities in rc using a tlsclient
and tlssrv as the encryption and authentication layers. there is only one new
service, which after authentication and encryption setup accepts an arbitrary
rc script over the network and executes it with the standard filedescriptors
redirected to the conversaion (this is *after* authentication and in the
context of the authorized user).
the new rcpu program has a few improvements over cpu(1):
- doesnt mangle program arguments
- the remote process will get the clients standard file descriptors, so error
and output are separated and you can consume the clients input from the
remote side :-)
- forwards error status of remote process
theres no backwards mode for rimport, but a new program called rexport
for the same purpose.
all these services use exportfs without the bolted on initial handshake,
so the hope is to clean up exportfs in the future and remove all the ugly
crap in there.
theres a bootstrap problem:
when /bin/init is run, it processes /lib/namespace where we might want to
mount or bind resources to /n or /mnt. but mntgen was run later in
cpurc/termrc so these mounts would be ignored.
we already have mntgen in bootfs, so we can provide these mountpoints early.
i keep the termrc/cpurc mntgens where they are, but ignore the error
prints. this way old kernels will continue to work.
When a window is moved or reshaped, that implicitely tops
the window and makes it current. The conseqence of this
is that we always have to redraw the window as if it where
a current window in any case. This was handled for Reshaped
windows, but not when the window was just moved. We now
handle both cases the exact same way, getting rid of the
Moved wctl message.
make kbdproc() and mouseproc() share fd table with the main proc
and not explicitely close the file descriptors. so /dev/mouse gets
closed *after* /dev/draw/new to avoid the white window refresh issue.
apparently, this causes some quadcore ramnode vm to hang on boot,
even tho all cores successfully started up and are operational.
i suspect some side effect from timersinit()... this would also
mean *notsc= would break it (syncclock() would continue)...
its unclear.
i'm reverting this for now until the problem is better understood.
when testing in qemu, launching each ap became slower and slower
because all the ap's where spinning in syncclock() waiting for
cpu0 to update its mach0->tscticks, which happens only much later
after all cpu's have been started up.
now we wait for each cpu to do its timer callibration and
manually update our tscticks while we wait and each cpu will
not spin but halt while waiting for active.thunderbirdsarego.
this reduces the system load and noise for timer callibration
and makes the mp startup linear with regard to the number of
cores.
the shared command language assumed 512 byte sectors, which is
not the case for fdisk as it uses cylinders for the block unit.
so we introduce an extra argument in the Edit structure and
parseexpr() function so byte sizes are properly converted to
the block unit when the K,M,G and T postfixes are used.
the pcap files produced by snoopy had the wrong timestamps because it expected:
/* magic=0xa1b2c3d4 */
ulong ts_sec; /* seconds*/
ulong ts_usec; /* microseconds */
but we wrote:
uvlong ts; /* nanoseconds */
now, we write:
/* magic=0xa1b23c4d */
ulong ts_sec; /* seconds */
ulong ts_nsec; /* nanoseconds */
spew → I fixed the memory leak setjmp/longjmp problem with libjson
spew → http://www.spew.club/json.patch
spew → full file: http://www.spew.club/json.c
spew → going to bed, I'll annoy cinap_lenrek tomorrow to try to get this committed
instead of testing for special field primes each time in mpmod(),
make it explicit with a mpfiled() function that tests a modulus N
to be of some special form that can be reduced more efficiently with
some precalculation, and replaces N with a Mfield* when it can. the
Mfield*'s are recognized by mpmod() as they have the MPfield flag
set and provide a function pointer that executes the fast reduction.
as the generated parser intermixes lines from .y source
and the parser text, the line source/lineno for yyparse()
shows up wrong in the debugger. to make stack traces a
bit less crazy, put a #line 1 "/sys/lib/yaccpar" before
copying in the parser text.
