- return distinct error message when attempting to create Globalseg with physseg name
- copy directory name to up->genbuf so it stays valid after we unlock(&glogalseglock)
- cleanup wstat() handling, allow changing uid
- make sure global segment size is below SEGMAXSIZE
- move isoverlap() check from globalsegattach() into segattach()
- remove Proc* argument from globalsegattach(), segattach() and isoverlap()
- make Physseg.attr and segattach attr parameter an int for consistency
to figure out what network connection a particular tls
conversation refers to, we add the path of the underlying
we send the encrypted tls traffic over in the status file,
example:
term% grep -n '^Chan:' '#a'/tls/*/status
#a/tls/0/status:7: Chan: /net/tcp/6/data
#a/tls/1/status:7: Chan: /net/tcp/0/data
/n/bugs/open/multicasts_and_udp_buffers
http://bugs.9front.org/open/multicasts_and_udp_buffers/readmemichal@Lnet.pl
I have ported my small MPEG-TS analisis tool to Plan9.
To allow this application working I had to fix a bug in the kernel IPv4 code and increase UDP input buffer.
Bug is related to listening for IPv4 multicast traffic. There is no problem if you listen for only one group or multiple groups with different UDP ports. This works:
Write to UDP ctl:
anounce PORT
addmulti INTERFACE_ADDR MULTICAST_ADDR
headers
and you can read packets from data file.
You need to set headers option because otherwise every UDP packet for MULTICAST_ADDR!PORT is treat as separate connection. This is a bug and should be fixed too, but I didn't tried it.
There is a problem when you need to receive packets for multiple multicast groups. Usually the same destination port is used by multiple streams and above sequence of commands fails for second group because the port is the same.
Simple and probably non-intrusive fix is adding "|| ipismulticast(addr)" to if statement at /sys/src/9/ip/devip.c:861 line:
if(ipforme(c->p->f, addr) || ipismulticast(addr))
This fixes the problem and now you can use the following sequence to listen for multiple multicast groups even if they all have the same destination port:
announce MULTICAST_ADDR!PORT
addmulti INTERFACE_ADDR MULTICAST_ADDR
headers
After that my application started working but signals packet drops at >2 Mb/s input rate. The same is reported by kernel netlog. Increase capacity of UDP connection input queue fixes this problem /sys/src/9/ip/udp.c:153
c->rq = qopen(512*1024, Qmsg, 0, 0);
--
Michał Derkacz
access to the axi segment hangs the machine when the fpga
is not programmed yet. to prevent access, we introduce a
new SG_FAULT flag, that when set on the Segment.type or
Physseg.attr, causes the fault handler to immidiately
return with an error (as if the segment would not be mapped).
during programming, we temporarily set the SG_FAULT flag
on the axi physseg, flush all processes tlb's that have
the segment mapped and when programming is done, we clear
the flag again.
tsleep() used to cancel the timer with:
if(up->tt != nil)
timerdel(up);
which still can result in twakeup() to fire after tsleep()
returns (because we set Timer.tt to nil *before* we call the tfn).
in most cases, this is not an issue as the Rendez*
usually is just &up->sleep, but when it is dynamically allocated
or on the stack like in tsemacquire(), twakeup() will call
wakeup() on a potentially garbage Rendez structure!
to fix the race, we execute the wakup() with the Timer lock
held, and set p->trend to nil only after we called wakeup().
that way, the timerdel(); which unconditionally locks the Timer;
can act as a proper barrier and use up->trend == nil as the
condition if the timer has already fired.
for queue like non-seekable files, it is impossible to implement an
exportfs because one has to run the kernels devtab read() and write()
in separate processes, and that makes it impossible to maintain 9p message
order as the scheduler can come in and randomly schedule one process before
another.
so as soon as we have a transition from 9p -> syscalls, we'r screwed.
i currently see just two possibilities:
- introduce special file type like QTSEQ with strictly ordered i/o semantics
- fix all fileservers and exportfs to only do one outstanding i/o to QTSEQ files
which means maintaining a queue per fid
this doesnt propagate. so exporting slow 9p mount again will be limited
again by latency of the inner mount.
other option:
- return offset in Rread, so client can bring responses back into order. this
requires changing all fileservers and drivers to maintain such an per fid offset
and change the protocol to include it in the response, and also pass it to userspace
(new syscalls or pass it in TOS)
this only works for read pipelining, write is still screwed.
both options suck.
--
cinap
(ppp->secret comes from factotum and it can have any size)
This patch also sets the correct state after success and
failure cases in chap negotiation (without them the code was
working because it expected the other point to pass to net
phase or due to the timer).
p2.patch: Do not request encriptation with -c or -C in ppp
(it was a bit annoying request compression, and when the ACK
from the server was received then send a NAK).
p3.patch: Add support for md5 and mschap in in chap
(without this patch ppp was passing to the net stage
without worring about chap).
- remove redundant flushimage() calls before readmouse()
- remove flushimage() calls for allocimage(),freeimage() and originwindow()
this is experimental. it will break allocimage() error handling unless the
caller does explicit flushimage() calls, tho the gains
in usability over high latency connections is huge. in most cases, programs
will just terminate when encountering these errors.
both server and client need to be convinced that the connection
is broken for a connection reestablishment to happen as the server
will only start looking for incoming clients when the connection
already broke. so use the 8 second interval sync messages
to check for connection lifeness. if we miss two syncs in time,
we declare the connecton to be broken and will try to reconnect.
k0ga reports:
Hello,
While I was setting my pppoe conexion with my ISP
I discovered several problems in ip/pppoe. I used
the command line ip/pppoe -A '' ether0 and I got
this:
...
dropping unwanted pkt: wrong ac name
panic: D2B called on non-block dc10 (double-free?)
note rcved: sys: trap: fault read addr=0x0 pc=0x000066e1
pppoe 1013: suicide: sys: trap: fault read addr=0x0 pc=0x000066e1
cpu% acid 1013
/proc/1013/text:386 plan 9 executable
/sys/lib/acid/port
/sys/lib/acid/386
acid: stk()
abort()+0x0 /sys/src/libc/9sys/abort.c:6
ppanic(p=0xd1b8,fmt=0xc7f9)+0x146 /sys/src/libc/port/malloc.c:166
D2B(p=0xd1b8,v=0xdc10)+0x57 /sys/src/libc/port/pool.c:926
poolfreel(v=0xdc10,p=0xd1b8)+0x20 /sys/src/libc/port/pool.c:1152
poolfree(p=0xd1b8,v=0xdc10)+0x3b /sys/src/libc/port/pool.c:1287
free(v=0xdc18)+0x23 /sys/src/libc/port/malloc.c:250
clearstate()+0x1b /sys/src/cmd/ip/pppoe.c:328
pppoe(ether=0xdfffefc1)+0x123 /sys/src/cmd/ip/pppoe.c:426
main(argv=0xdfffefa0,argc=0x1)+0x89 /sys/src/cmd/ip/pppoe.c:100
_main+0x31 /sys/src/libc/386/main9.s:16
acid:
clearstate() is called in pppoe.c:424, and it frees acname and sets it
to nil. pktread() is called in pppoe.c:434 with parameter wantoffer,
which frees acname again in line pppoe.c:360 but doesn't set it to
nil, so clearstate() makes a double free in the next iteration.
for version <= TLS1.1, there is no sigalg field in the ServerKeyExchange
message and the signature digest algorithm is fixed to md5+sha1 and we
only support RSA signatures (TLS1.1 doesnt know about ECDSA).
this allows running kbdfs under kbdfs :-)
going use this in new drawterm. drawterm provides the initial
/dev/kbd, but only sends rune up/down messages (keeps it simple).
the servers kbdfs reads that and exports itself the full
set of files, similar to what we do in vncs. this also
provides note processing.
the dns file service can be restarted, which causes it to forget
all fid state. given the simple file system structure of the dns
service (just a single dns file), we can assume that rpcs
on a unknown fid refers to the root, so the mountpoint will stay
valid and /net/dns can be reopend avoiding the need for a remount
of the dns service after restart.
The execexec() function should never return, as it irreversably changes
the filedescriptor table for the new program. This means rc's internal
filedesciptors for reading the script get implicitely closed and we cannot
continue the rc interpreter when Execute() fails. So Execute() now sets the
error status, and execexec() runs Xexit() in case Execute() returns.
when we look up role=speakfor key and askforkeys is set, the
findkey() can return RpcNeedkey, which causes us to skip the
query for a role=client key. Instead, we now check for the
return value != RpcOk (and != RpcConfirm which we want to
handle the same for both queries).
we have to free the attribute lists when returning RpcConfirm.
the ini buffer was not reset when we got eof in the message
body read causing a endless loop. instead of defining our
own read9pmsg() function, just handle the first read specially
when we consumed the first 4 bytes for the "impo" protocol
escape check.
this code was if(0) for a long time due to wrong parentesis,
fixed parentesis cause print spam on some machines making them
unusage (kenji okomoto). removing the check alltogether.
theres a bootstrap problem:
when /bin/init is run, it processes /lib/namespace where we might want to
mount or bind resources to /n or /mnt. but mntgen was run later in
cpurc/termrc so these mounts would be ignored.
we already have mntgen in bootfs, so we can provide these mountpoints early.
i keep the termrc/cpurc mntgens where they are, but ignore the error
prints. this way old kernels will continue to work.
When a window is moved or reshaped, that implicitely tops
the window and makes it current. The conseqence of this
is that we always have to redraw the window as if it where
a current window in any case. This was handled for Reshaped
windows, but not when the window was just moved. We now
handle both cases the exact same way, getting rid of the
Moved wctl message.
make kbdproc() and mouseproc() share fd table with the main proc
and not explicitely close the file descriptors. so /dev/mouse gets
closed *after* /dev/draw/new to avoid the white window refresh issue.
apparently, this causes some quadcore ramnode vm to hang on boot,
even tho all cores successfully started up and are operational.
i suspect some side effect from timersinit()... this would also
mean *notsc= would break it (syncclock() would continue)...
its unclear.
i'm reverting this for now until the problem is better understood.
when testing in qemu, launching each ap became slower and slower
because all the ap's where spinning in syncclock() waiting for
cpu0 to update its mach0->tscticks, which happens only much later
after all cpu's have been started up.
now we wait for each cpu to do its timer callibration and
manually update our tscticks while we wait and each cpu will
not spin but halt while waiting for active.thunderbirdsarego.
this reduces the system load and noise for timer callibration
and makes the mp startup linear with regard to the number of
cores.
the shared command language assumed 512 byte sectors, which is
not the case for fdisk as it uses cylinders for the block unit.
so we introduce an extra argument in the Edit structure and
parseexpr() function so byte sizes are properly converted to
the block unit when the K,M,G and T postfixes are used.
the pcap files produced by snoopy had the wrong timestamps because it expected:
/* magic=0xa1b2c3d4 */
ulong ts_sec; /* seconds*/
ulong ts_usec; /* microseconds */
but we wrote:
uvlong ts; /* nanoseconds */
now, we write:
/* magic=0xa1b23c4d */
ulong ts_sec; /* seconds */
ulong ts_nsec; /* nanoseconds */
