remove unneeded waserror() block, loopoput is alled from
loopbackbwrite only so we will always get called with a
*single* block, so the concatblock() is not needed.
to avoid copying in padblock() when adding cryptographics macs to a block
in devtls/devssl/esp we reserve 16 extra bytes to the allocation.
remove qio ixsummary() function and add acid function qiostats() to
/sys/lib/acid/kernel
simplify iallocb(), remove iallocsummary() statitics.
given that devmnt will almost always write into a pipe
or a network connection, which supports te bwrite routine,
we can avoid the memory copy that would have been done by
devbwrite(). this also means the i/o buffer for writes
will get freed sooner without having to wait for the 9p
rpc to get a response, saving memory.
theres one case where we have to keep the rpc arround and
that is when we write to a cached file, as we want to update
the cache with the data that was written, but the user buffer
cannot be trusted to stay the same during the rpc.
devfs:
- fix memory leak in devfs leaking the aes key
- allocate aes-xts cipher state in secure memory
- actually check if the hexkey got fully parsed
cryptsetup:
- get rid of stupid "type YES" prompt
- use genrandom() to generate salts and keys
- rewrite cryptsetup to use common pbkdf2 and readcons routines
- fix alot of error handling and simplify the code
- move cryptsetup command to disk/cryptsetup
- update cryptsetup(8) manual page
we can encrypt the 256 bit chacha key on each invocation
making it hard to reconstruct previous outputs of the
generator given the current state (backtracking resiatance).
the kernels custom rand() and nrand() functions where not working
as specified in rand(2). now we just use libc's rand() and nrand()
functions but provide a custom lrand() impelmenting the xoroshiro128+
algorithm as proposed by aiju.
we now access the user buffer in randomread() outside of the lock,
only copying and advancing the chacha state under the lock. this
means we can use randomread() within the fault handling path now
without fearing deadlock. this also allows multiple readers to
generate random numbers in parallel.
we might wake up on a different cpu after the sleep so
delta from machX->ticks - machY->ticks can become negative
giving spurious timeouts. to avoid this always use the
same mach 0 tick counter for the delta.
the manpage states that capabilities time out after a minute,
so we add ticks field into the Caphash struct and record the
time when the capability was inserted. freeing old capabilities
is handled in trimcaps(), which makes room for one extra cap
and frees timed out ones.
we also limit the capuse write size to less than 1024 bytes to
prevent denial of service as we have to copy the user buffer.
(memory exhaustion).
we have to check the from user *before* attempting to remove
the capability! the wrong user shouldnt be able to change any
state. this fixes the memory leak of the caphash.
do the hash comparsion with tsmemcmp(), avoiding timing
side channels.
allocate the capabilities in secret memory pool to prevent
debugger access.
The kernel needs to keep cryptographic keys and cipher states
confidential. secalloc() allocates memory from the secret pool
which is protected from debuggers reading the memory thru devproc.
secfree() releases the memory, overriding the data with garbage.
the arm compiler can lift long->vlong casts on multiplcation
and convert 64x64->64 multiplication into a 32x32->64 one
with optional 64 bit accumulate.
- return distinct error message when attempting to create Globalseg with physseg name
- copy directory name to up->genbuf so it stays valid after we unlock(&glogalseglock)
- cleanup wstat() handling, allow changing uid
- make sure global segment size is below SEGMAXSIZE
- move isoverlap() check from globalsegattach() into segattach()
- remove Proc* argument from globalsegattach(), segattach() and isoverlap()
- make Physseg.attr and segattach attr parameter an int for consistency
to figure out what network connection a particular tls
conversation refers to, we add the path of the underlying
we send the encrypted tls traffic over in the status file,
example:
term% grep -n '^Chan:' '#a'/tls/*/status
#a/tls/0/status:7: Chan: /net/tcp/6/data
#a/tls/1/status:7: Chan: /net/tcp/0/data
access to the axi segment hangs the machine when the fpga
is not programmed yet. to prevent access, we introduce a
new SG_FAULT flag, that when set on the Segment.type or
Physseg.attr, causes the fault handler to immidiately
return with an error (as if the segment would not be mapped).
during programming, we temporarily set the SG_FAULT flag
on the axi physseg, flush all processes tlb's that have
the segment mapped and when programming is done, we clear
the flag again.
tsleep() used to cancel the timer with:
if(up->tt != nil)
timerdel(up);
which still can result in twakeup() to fire after tsleep()
returns (because we set Timer.tt to nil *before* we call the tfn).
in most cases, this is not an issue as the Rendez*
usually is just &up->sleep, but when it is dynamically allocated
or on the stack like in tsemacquire(), twakeup() will call
wakeup() on a potentially garbage Rendez structure!
to fix the race, we execute the wakup() with the Timer lock
held, and set p->trend to nil only after we called wakeup().
that way, the timerdel(); which unconditionally locks the Timer;
can act as a proper barrier and use up->trend == nil as the
condition if the timer has already fired.
for queue like non-seekable files, it is impossible to implement an
exportfs because one has to run the kernels devtab read() and write()
in separate processes, and that makes it impossible to maintain 9p message
order as the scheduler can come in and randomly schedule one process before
another.
so as soon as we have a transition from 9p -> syscalls, we'r screwed.
i currently see just two possibilities:
- introduce special file type like QTSEQ with strictly ordered i/o semantics
- fix all fileservers and exportfs to only do one outstanding i/o to QTSEQ files
which means maintaining a queue per fid
this doesnt propagate. so exporting slow 9p mount again will be limited
again by latency of the inner mount.
other option:
- return offset in Rread, so client can bring responses back into order. this
requires changing all fileservers and drivers to maintain such an per fid offset
and change the protocol to include it in the response, and also pass it to userspace
(new syscalls or pass it in TOS)
this only works for read pipelining, write is still screwed.
both options suck.
--
cinap
theres a bootstrap problem:
when /bin/init is run, it processes /lib/namespace where we might want to
mount or bind resources to /n or /mnt. but mntgen was run later in
cpurc/termrc so these mounts would be ignored.
we already have mntgen in bootfs, so we can provide these mountpoints early.
i keep the termrc/cpurc mntgens where they are, but ignore the error
prints. this way old kernels will continue to work.
introduce cpushutdown() function that does the common
operation of initiating shutdown, returning once all
cpu's got the message and are about to shutdown. this
avoids duplicated code which isnt really machine specific.
automatic reboot on panic only when *debug= is not set
and the machine is a cpu server or has no display,
otherwise just hang.
when opening a /env file ORCLOSE, and the process exits, envgrp() would
return nil can crash in envremove() because procexit will have set up->egrp
to nil before calling closefgrp().
the solution is to capture the environment on open, keeping a reference in
Chan.aux, so it doesnt matter on what process the close happens and a
env chan will always refer to its original environment group.
instead of checking addr+len >= addr, check len >= -addr so
that addr == 0 is never valid for len > 0 even if we decide
to have memory at the zero page so theres never any chance
user can pass in "nil" pointers.
put up some signs where we fall thru the switch cases in
fixfault()
sha256 is only defined for TLS1.2, however, technically, theres
no reason not to use it in TLS1.0/TLS1.1. the choice is up to
tlshand and pushtls, not the kernel.
instead of ordering the source mount list, order the new destination
list which has the advantage that we do not need to wlock the source
namespace, so copying can be done in parallel and we do not need the
copy forward pointer in the Mount structure.
the Mhead back pointer in the Mount strcture was unused, removed.
there was a race between cunmount() and walk() on Mhead.from as Mhead.from was
unconditionally freed when we cunmount(), but findmount might have already
returned the Mhead in walk(). we have to ensure that Mhead.from is not freed
before the Mhead itself (now done in putmhead() once the reference count of the
Mhead drops to zero).
the Mhead struct contained two unused locks, removing.
no need to hold Pgrp.ns lock in closegrp() as nobody can get to it (refcount
droped to zero).
avoid cclose() and freemount() while holding Mhead.lock or Pgrp.ns locks as
it might block on a hung up fileserver.
remove the debug prints...
cleanup: use nil for pointers, remove redundant nil checks before putmhead().
we have to validaddr() and vmemchr() all argv[] elements a second
time when we copy to the new stack to deal with the fact that another
process can come in and modify the memory of the process doing the
exec. so the argv[] strings could have changed and increased in
length. we just make sure the data being copied will fit into the
new stack and error when we would overflow.
also make sure to free the ESEG in case the copy pass errors.
argv[] strings get copied to the new processes stack segment, which
has a maximum size of USTKSIZE, so limit the size of the strings to
that and check early for overflow.
this moves the name validation out of segattach() to syssegattach()
to make sure the segment name cannot be changed by the user while
segattach looks at it.
when executing a script, we did advance argp0 unconditionally
to replace argv[0] with the script name. this fails when
argv[] is empty, then we'd advance argp0 past the nil terminator.
the alternative would be to *not* advance if *argp0 == nil, but that
would require another validaddr() check for a case that is unlikely
to have been anticipated in most programs being invoked as
libc's ARGBEGIN macro assumes argv[0] being non-nil as it also
unconditionally advances the argv pointer.
to keep us sane, we now reject an empty argv[]. on entry, we
verify that argv[] is valid for at least two elements:
- the program name argv[0], has to be non-nil
- the first potential nil terminator in argv[1]
when argv[0] == nil, we throw Ebadarg "bad arg in system call"
we already export mntauth() and mntversion(), so why not stop
being sneaky and just export mntattach() so bindmount() and
devshr can just call it directly with proper arguments being
checked.
we can also avoid handling #M attach specially in namec()
by having the devmnt's attach function do error(Enoattach).
to avoid double caching, attachimage() and setswapchan() clear
the CCACHE flag on the channel but this keeps the read ahread
state of the cache arround (until the chan gets closed), so also
call cclunk() to detach the mcp and free the read ahead state.
avoid the call to cread() when CCACHE flag is clear.
use the actual iounit returned from Ropen/Rcreate to chunk reads and writes
instead of c->mux->msize-IOHDRSZ.
dont preallocate the rpc buffers to msize, most 9p requests are rather small
(except Twrite of course). so we allocate the buffer on demand in mountio()
with some rounding to avoid frequent reallocations.
avoid malloc()/free() while holding mntalloc lock.
this changes devmnt adding mntrahread() function and some helpers
for it to do pipelined sequential read ahead for the mount cache.
basically, cread() calls mntrahread() with Mntrah structure and it
figures out if we where reading sequentially and if thats the case
issues reads of c->iounit size in advance.
the read ahead state (Mntrah) is kept in the mount cache so we can
handle (read ahead) cache invalidation in the presence of writes.
as the Fgrp can be shared with other processes, we have to
recheck the fd index after locking the Fgrp in fdclose()
to make sure not to read beyond the bounds of the fd array.
using the user buffer has a race where the user can modify
the buffer from another process before it is copied into the cache.
this allows poisoning the cache for every file where the user
has read access.
instead, we update the cache from kernel memory.
Wnode gets two new counters: txcount and txerror
and actrate pointer that will be between minrate
and maxrate.
driver should use actrate instead of maxrate for
transmission when it can provide error feedback.
when a driver detects a transmission failed, it calls
wifitxfail() with the original packet. wifitxfail() then
reduces wn->actrate.
every 256th packet, we optimistically increase wn->actrate
before transmitting.
- reject files smaller or equal to two bytes, they are bogus
- fix out of bounds access in shargs() when n <= 2
- only copy the bytes read into line buffer
- use nil for pointers instead of 0
imagereclaim(), pagereclaim():
- move imagereclaim() and pagereclaim() declarations to portfns.h
- consistently use ulong type for page counts
- name number of pages to free "pages" instead of "min"
- check for pages == 0 on entry
freepages():
- move pagechaindone() call to wakeup newpage() consumers inside
palloc critical section.
putimage():
- use long type for refcount
addresses va's of 0 and -BY2PG cause trouble with some memmove()/memset()
implementations and possibly other code because of the nil pointer
and end pointers wrapping to zero.
unlock()/iunlock():
we need to place the coherence() *before* "l->key = 0", so that any
stores that where done while holding the lock become observable
*before* other processors see the lock released.
cas()/tas():
place memory barrier before successfull return to prevent reordering.
making sure to close the dot in every kproc appears repetitive,
so instead stop inheriting the dot in kproc() as this is usually
never what you wanted in the first place.
give kernel processes and local disk file servers (procs
having noswap flag set) a clear advantage for page allocation
under starved condition by giving them ther own wait queue so
they get readied as soon as pages become available.
the intend of posting a note to the faulting process is to
interrupt the syscall to give the note handler a chance
to handle it. kernel processes however, have no note handlers
and all the postnote() does is set up->notepending which will
make the next attempt to sleep raise an Eintr[] error. this
is harmless, but usually not what we want.
there's no need to waste space for a error buffer in the Segio
structure, as the segmentio kproc will be waiting for the next
command after an error and will not overwite it until we issue
another command.
devproc's procctlmemio() did not handle physical segment
types correctly, as it assumed it can just kmap() the page
in question and write to it. physical segments however
need to be mapped uncached but kmap() will always map
cached as it assumes normal memory. on some machines with
aliasing memory with different cache attributes
leads to undefined behaviour!
we borrow the code from devsegment and provide a generic
segio() function to read and write user segments which
handles all the cases without using kmap by just spawning
a kproc that attaches the segment that needs to be read
from or written to. fault() will setup the right mmu
attributes for us. it will also properly flush pages for
segments that maintain instruction cache when written.
however, tlb's have to be flushed separately.
segio() is used for devsegment and devproc now, which
also allows for simplification of fixfault() as there is no
special error handling case anymore as fixfault() is now
called from faulting process *only*.
reads from /proc/$pid/mem can now span multiple pages.
code like "return g->dlen;" is wrong as we do not hold the
qlock of the global segment. another process could come in
and override g->dlen making us return the wrong byte count.
avoid copying when we already got a kernel address (kernel memory
is the same on processes) which is the case with bread()/bwrite().
this is the same optimization that devsd does.
also avoid allocating/freeing and copying while holding the qlock.
when we copy to/from user memory, we might fault preventing
others from accessing the segment while fault handling is in
progress.
walking the freelist for every page is too slow. as we
are freeing a range, we can do a single pass unlinking all
pages in our range and at the end, check if all pages
where freed, if not put the pages that we did free back
and retry, otherwise we'r done.
fixed segments are continuous in physical memory but
allocated in user pages. unlike shared segments, they
are not allocated on demand but the pages are allocated
on creation time (devsegment). fixed segments are
never swapped out, segfreed or resized and can only be
destroyed as a whole.
the physical base address can be discovered by userspace
reading the ctl file in devsegment.
the mount cache uses Page.va to store cached range offset and
limit, but mips kernel uses cache index bits from Page.va to
maintain page coloring. Page.va was not initialized by auxpage().
this change removes auxpage() which was primarily used only
by the mount cache and use newpage() with cache file offset
page as va so we will get a page of the right color.
mount cache keeps the index bits intact by only using the top
and buttom PGSHIFT bits of Page.va for the range offset/limit.
when we are skipping a process because we could not acquire
its segment lock, dont call reclaim() again (which is pointless
as we didnt pageout any pages), instead try the next process.
the Pte.last pointer is inclusive, so don't miss the last page
in pageout().
mcountseg(), mfreeseg():
use Pte.first/last pointers when possible and avoid constructs
like s->map[i]->pages[j].
freepte():
do not zero entries in freepte(), the segment is going away and
here is no point in zeroing page pointers. hoist common code at
the top avoiding duplication.
segpage(), fixfault():
avoid load after store for Pte** pointer.
fixfault():
return -1 in default case to avoid the "used but not set" warning
for mmuphys and get rid of the useless initialization.
syssegflush():
due to len being unsigned, the pe = PGROUND(pe) can make "chunk"
bigger than len causing a overflow. rewrite the function and deal
with page alignment and errors at the beginning.
syssegflush(), segpage(), fixfault(), putseg(), relocateseg(),
mcountseg(), mfreeseg():
keep naming consistent.
the "to" address can overflow in syssegfree() causing wrong
number of pages to be passed to mfreeseg(). with the current
implementation of mfreeseg() however, this doesnt cause any
data corruption but was just freeing an unexpected number of
pages.
this change checks for this condition in syssegfree() and
errors out instead. also mfreeseg() was changed to take
ulong argument for number of pages instead of int to keep
it consistent with other routines that work with page counts.
sdbio() tests if it can pass the buffer pointer directly to
the driver when it is already in kernel memory. we also need
to check if the buffer is properly aligned but alignment
requirement is handled in system specific sdmalloc() and
was not known to devsd.
to solve this, we *always* page align sd buffers and get rid
of the system specific sdmalloc() macro (was only used in bcm
kernel).
ignore physical segments in mcountseg() and mfreeseg(). physical
segments are not backed by user pages, and doing putpage() on
physical segment pages in mfreeseg() is an error.
do now allow physical segemnts to be resized. the segment size
is only checked in segattach() to be within the physical segment!
ignore physical segments in portcountpagerefs() as pagenumber()
does not work on the malloced page structures of a physical segment.
get rid of Physseg.pgalloc() and Physseg.pgfree() indirection as
this was never used and if theres a need to do more efficient
allocation, it should be done in a portable way.
the following hooks have been added to the ehci Ctlr
structore to handle cache coherency (on arm):
void* (*tdalloc)(ulong,int,ulong);
void* (*dmaalloc)(ulong);
void (*dmafree)(void*);
void (*dmaflush)(int,void*,ulong);
tdalloc() is used to allocate descriptors and the periodic
frame schedule array. on arm, this needs to return uncached
memory. tdalloc()ed memory is never freed.
dmaalloc()/dmafree() is used for io buffers. this can return
cached memory when when hardware maintains cache coherency (pc)
or dmaflush() is provided to flush/invalidate the cache (zynq),
otherwise needs to return uncached memory.
dmaflush() is used to flush/invalidate the cache. the first
argument tells us if we need to flush (non zero) or
invalidate (zero).
uncached.h is gone now. this change makes the handling explicit.
there are no kernels currently that do page coloring,
so the only use of cachectl[] is flushing the icache
(on arm and ppc).
on pc64, cachectl consumes 32 bytes in each page resulting
in over 200 megabytes of overhead for 32gb of ram with 4K
pages.
this change removes cachectl[] and adds txtflush ulong
that is set to ~0 by pio() to instruct putmmu() to flush
the icache.
this bug happens when the kernel runs out of mount rpc
buffers when allocating a flush rpc. in this case, mntflushalloc()
will errorjump out of mountio() leaving the currently in
flight rpc in the mount. the caller of mountrpc()/mountio()
frees the rpc thats still queued in the mount leaving
to interesting results.
for the fix, we add a waserror() arround mntflushalloc() and
handle the error case like a mount rpc failure which will
properly dequeue the rpc's in flight.
to allow bytewise access to /proc/#/fd, the contents of the file where
recreated on each call. if fd's had been closed or reassigned between
the reads, the offset would be inconsistent and a read could start off
in the middle of a line. this happens when you cat /proc/#/fd file of
a busy process that mutates its filedescriptor table.
to fix this, we now return one line record at a time. if the line
fits in the read size, then this means the next read will always start
at the beginning of the next line record. we remember the consumed
byte count in Chan.mrock and the current record in Chan.nrock. (these
fields are free to usefor non-directory files)
if a read comes in and the offset is the same as c->mrock, we do not
need to regenerate the file and just render the next c->nrock's record.
for reads smaller than the line count, we have to regenerate the content
up to the offset and the race is still possible, but this should not
be the common case.
the same algorithm is now used for /proc/#/ns file, allowing a simpler
reimplementation and getting rid of Mntwalk state strcture.
the purpose of checkpages() is to verify consitency of the hardware mmu state,
not to notify on the console that a program faulted. a program could also
continue after handling the note. (this seems to be the case in go programs)
this is a new more simple version of the mount cache
that does not require dynamic allocations for extends.
the Mntcache structure now contains a page bitmap
that is used for quick page invalidation. the size
of the bitmap is proportional to MAXCACHE.
instead of keeping track of cached range in the
Extend data structure, we keep all the information
in the Page itself. the offset from the page where
the cache range starts is in the low PGSHIT bits and
the end in the top bits of Page.va.
we choose Page.daddr to map 1:1 the Mountcache number
and page number (pn) in the Mountcache. to find a page,
we first check the bitmap if the page is there and then
do a pagelookup() with the daddr key.
change page cache ids (bid) to uintptr so we use the full
address space of Page.daddr.
make maxcache offset check consistent in cread().
use consistent types in cupdate() and simplify with goto.
make internal functions static.
use nil instead of 0 for pointers.
there is no use for "bootdisk" variable parametrization
of /boot/boot and no point for the boot section with its
boot methods in the kernel configuration anymore. so
mkboot and boot$CONF.out are gone.
move the rules for bootfs.paq creation in 9/boot/bootmkfile.
location of bootfs.proto is now in 9/boot/bootfs.proto.
our /boot/boot target is now just "boot".
expand the list of files specified in bootfs.proto and use them
as dependencies to bootfs.paq rule. this way, bootfs.paq is
regenerated when the to be included files have been modified.
we can avoid some flickering when removing the software cursor
from the shadow framebuffer by avoiding the flushscreenimage()
call.
once the cursor is redrawn, we flush the combined rect of its
old and new position in one go.
theres a race where procstopwait() is interrupted by a note,
setting p->pdbg to nil *before* acquiering the lock and
and pexit() and procctl() accessing it assuming it doesnt
change under them while they are holding the lock.
alexchandel got the kernel to crash with divide error
on qemu 2.1.2/macosx at this location. probably
caused by perfticks()/tsc being wrong or accounttime()
not having been called yet from timer interrupt yet for
some reason.
WHAT WHERE THEY *THINKING*??!?!
unlike seek, the (new) nsec syscall (not used in 9front libc)
returns the time value in register (from nix), so do the same
for compatibility.
from segattach(2):
Va and len specify the position of the segment in the
process's address space. Va is rounded down to the nearest
page boundary and va+len is rounded up. The system does not
permit segments to overlap. If va is zero, the system will
choose a suitable address.
just rounding up len isnt enougth. we have to round up va+len
instead of just len so that the span [va, va+len) is covered
even if va is not page aligned.
kenjis example:
print("%p\n",ap); // 206cb0
ap = segattach(0, "shared", ap, 1024);
print("%p\n",ap); // 206000
term% cat /proc/612768/segment
Stack defff000 dffff000 1
Text R 1000 6000 1
Data 6000 7000 1
Bss 7000 7000 1
Shared 206000 207000 1
term%
note that 0x206cb0 + 0x400 > 0x20700.
we have to recheck the condition under tod lock, otherwise
another process can come in and updated tod.last and
tod.off and once we have the lock, we would make time
jump backwards.
when mountmux() completes a request for another process, enforce odering
of the loads and stores to the request prior to writing q->done = 1
so mntflushfree() sees q->done != 0 only when the request has actually
completed. otherwise, the q->done = 1 store could have been reordered
before the load from q->z, reading from already freed request and causing
spurious wakeups.
removing unused mntstats callback.
use nil for pointers instead of 0.
dont kill the calling process when demand load fails if fixfault()
is called from devproc. this happens when you delete the binary
of a running process and try to debug the process accessing uncached
pages thru /proc/$pid/mem file.
fixes to procctlmemio():
- fix missed unlock as txt2data() can error
- make sure the segment isnt freed by taking a reference (under p->seglock)
- access the page with segment locked (see comment)
- get rid of the segment stealer lock
other stuff:
- move txt2data() and data2txt() to segment.c
- add procpagecount() function
- make return type mcounseg() to ulong
make the Page stucture less than half its original size by getting rid of
the Lock and the lru.
The Lock was required to coordinate the unchaining of pages that where
both cached and on the lru freelist.
now pages have a single next pointer that is used for palloc.head
freelist xor for page cache hash chains in Image.pghash[].
cached pages are not on the freelist anymore, but will be reclaimed
from images by the pager when the freelist runs out of pages.
each Image has its own 512 hash chains for cached page lookup. That is
2MB worth of pages and there should be no collisions for most text images.
page reclaiming can be done without holding palloc.lock as the Image is
the owner of the page hash chains protected by the Image's lock.
reclaiming Image structures can be done quickly by only reclaiming pages from
inactive images, that is images which are not currently in use by segments.
the Ref structure has no Lock anymore. Only a single long that is atomically
incremented or decremnted using cmpswap().
there are various other changes as a consequence code. and lots of pikeshedding,
sorry.
we have to make sure the *swap address* doesnt go away,
after putting the swap address in the segment pte.
after we unlock the segment, the process could be
killed or fault which would cause the swap address to
be freed *before* we write the page to disk when it
pulls the page from the cache and putswap() swap pte.
keeping a reference to the page is no good. we have
to hold on the swap address. this also has the advantage
that we can now test if the swap address is still
referenced and can avoid writing to disk.
as with the Block refcount changes, _xinc() and _xdec() arent
used anymore, so remove them.
architecure can still define ainc()/adec() when it needs them.
change Proc.nlocks from Ref to int and just use normal increment and decrelemt
as done in erik quanstros 9atom.
It is not clear why we used atomic increment in the fist place as even if we
get preempted by interrupt and scheduled before we write back the incremented
value, it shouldnt be a problem and we'll just continue where we left off as
our process is the only one that can write to it.
Yoann Padioleau found that the Mach pointer Lock.m wasnt maintained
consistently for lock() vs canlock() and ilock(). Fixed.
Use uintptr instead of ulong for maxlockpc, maxilockpc and ilockpc debug variables.
the palloc.pages array takes arround 5% of the upages which
gives us:
16GB = ~0.8GB
32GB = ~1.6GB
64GB = ~3.2GB
we only have 2GB of address space above KZERO so this will not
work for long.
instead, pageinit() was altered to accept a preallocated memory
in palloc.pages. and preallocpages() in pc64/main.c allocates the
in upages memory, mapping it in the VMAP area (which has 512GB).
the drawback is that we cannot poke at Page structures now from
/proc/n/mem as the VMAP area is not accessible from it.
procwrite() did truncate the offset to 32bit ulong.
introduce off2addr() function that does the sign
extension hack and use it conststently for Qmem
reads and writes.
for the CMclose procctl, the fd number was not
bounds checked before indexing in the Fgrp.fd
array.
for the CMclosefiles, we looped fd from 0..maxfd-1,
but need to loop from 0..maxfd as maxfd is inclusive.
on amd64, the text segment is aligned and padded to
2MB, but segment granularity is 4K which can give
us page faults that are beyond the highest file
offset. this is perfectly valid, but was not handled
correctly in pio().
make mntflushfree() return the original rpc and do the
botched clunk check on the original instead of the
current rpc.
so if we get a botched flush of a clunk, we abandon the
fid of the channel as well.
if theres an error transmitting a Tclunk or Tremove request,
we cannot assume the fid to be clunked. in case this was
a transient error, reusing the fid on further requests
will fail.
as a work arround, we zero the channels fid and allocate
a new fid before the chan is reused.
this is not correct as we essentially leak the fid
on the fileserver, but we will still be able to use
the mount.
ftrvxmtrx repots devices that use the endpoint number for
input and output of different types like:
nusb/ether: parsedesc endpoint 5[7] 07 05 81 03 08 00 09 # ep1 in intr
nusb/ether: parsedesc endpoint 5[7] 07 05 82 02 00 02 00
nusb/ether: parsedesc endpoint 5[7] 07 05 01 02 00 02 00 # ep1 out bulk
the previous change tried to work arround this but had the
concequence that only the lastly defined endpoint was
usable.
this change addresses the issue by allowing up to 32 endpoints
per device (16 output + 16 input endpoints) in devusb. the
hci driver will ignore the 4th bit and will only use the
lower 4 bits as endpoint address when talking to the usb
device.
when we encounter a conflict, we map the input endpoint
to the upper id range 16..31 and the output endpoint
to id 0..15 so two distinct endpoints are created.
the original format for addresses was %8lux which was changed
to %p for amd64. this broke linuxemu which assumes fixed format
in the segment file. as a compromize we change it to %8p and
amd64 port of linuxemu will hopefully use a more robust parser :)
the comment about Physseg.size being in pages is wrong,
change type to uintptr and correct the comment.
change the length parameter of segattach() and isoverlap()
to uintptr as well. segments can grow over 4GB in pc64 now
and globalsegattach() in devsegment calculates len argument
of isoverlap() by s->top - s->bot. note that the syscall
still takes 32bit ulong argument for the length!
check for integer overflow in segattach(), make sure segment
goes not beyond USTKTOP.
change PTEMAPMEM constant to uvlong as it is used to calculate
SEGMAXSIZE.
simplifying paging code by getting rid of duppage(). instead,
fixfault() now always makes a copy of the shared/cached page
and leaves the cache alone. newpage() uncaches pages as
neccesary.
thanks charles forsyth for the suggestion.
from http://9fans.net/archive/2014/03/26:
> It isn't needed at all. When a cached page is written, it's trying hard to
> replace the page in the cache by a new copy,
> to return the previously cached page. Instead, I copy the cached page and
> return the copy, which is what it already
> does in another instance. ...
imagereclaim() sabotaged itself by breaking the invariant
that cached pages are kept at the end of the page list.
once we made a hole of uncached pages, we would stop
reclaiming cached pages before it as the loop breaks
once it hits a uncached page. (we iterate backwards from
the tail to the head of the pagelist until pages have been
reclaimed or we hit a uncached page).
the solution is to move pages to the head of the pagelist
after removing them from the image cache.
file offset is 64 bit signed integer, negative offsets
are invalid and rejected by the kernel. to still access
kernel memory on amd64, we unconditionally clear the sign
bit of the 64 bit offset in libmach and devproc sign
extends the offset back to a 64 bit address.
this doubling affects all segment types, not just bss.
(tho text/data are usually small...)
and theres no telling if the segment will actually
grow in the future justifying the reduction of memmove
overhead in ibrk().
some ape programs are approaching the 16mb ssegmap size
so that code might trigger.
removing the smarts...
as erik quanstro suggests, theres not much of a point in
storing the full 64bit pc as one cannot get a code segment
bigger than 4G and amd64 makes it hard to use a pc that
isnt 64bit sign extension of 32bit.
instead, we only store ulong (as originally), but sign
extend back when returning in getmalloctag() and
getrealloctag().
getrealloctag() used to be broken. its now fixed.
this change is in preparation for amd64. the systab calling
convention was also changed to return uintptr (as segattach
returns a pointer) and the arguments are now passed as
va_list which handles amd64 arguments properly (all arguments
are passed in 64bit quantities on the stack, tho the upper
part will not be initialized when the element is smaller
than 8 bytes).
this is partial. xalloc needs to be converted in the future.
when user does read of exactly 12*12 bytes on draw
ctl file, the snprint() adds one more \0 byte writing
beyond the user buffer and corrupting memory.
fix this by not snprint()ing the final space and add
it manually.
