cinap_lenrek
3f9d5e4a4f
awk: don't get into a infinite loop with eof while in string (thanks BurnZeZ)
2017-08-11 03:38:10 +02:00
cinap_lenrek
6b999263ae
kernel: double READSTR buffer size to 8000 bytes for devusb
2017-08-11 01:32:24 +02:00
cinap_lenrek
7dab492324
devusb: superspeed bandwidth allocation handled by controller, skip usbload() calculation
...
with xhci, bandwidth allocations are handled by the controller
and there are various speed settings possible that currently
not exposed in the Udev. so just keep usbload() as it is for
usb2 and keep ep->load as zero for superspeed.
2017-08-11 01:08:13 +02:00
cinap_lenrek
153793714e
nusb/disk: add a 100ms sleep after ums reset, remove unused note handler, cleanup
...
my pretec usb stick sometimes hangs on the first inquiry request,
waiting for the inquiry response forever. adding a 100ms delay after
the reset command seems to fix it.
getting rid of unused "ding()" note handler and simplify umsrequest()
incomplete read handling.
2017-08-11 01:00:09 +02:00
qwx
0daed9edea
doom: clean up temporary mus files
2017-08-10 17:09:49 +02:00
qwx
16ef6e5596
add games/wadfs
2017-08-10 11:39:18 +02:00
cinap_lenrek
4be612946f
vt: fix silly bug causing characters be drawn one at a time
2017-08-09 18:53:48 +02:00
cinap_lenrek
ef3af6eaa3
sysinfo: run aux/icanhasvmx with verbose flag
2017-08-08 19:02:42 +02:00
cinap_lenrek
541e211b7c
sysinfo: only dump #r/nvram on amd64,386
...
right now, theres no kernel that stores hostowner keys
in #r/nvram, but this could change in the future. so
only dump #r/nvram on the pc where we know that its
not used to hold keys.
2017-08-08 10:16:13 +02:00
cinap_lenrek
ddf977d25c
vmx: fix hlt idle problem
2017-08-07 19:10:32 +02:00
cinap_lenrek
e0474599dd
usbxhci: implement recovery from host controller errors
2017-08-07 01:59:54 +02:00
cinap_lenrek
7d1b9e39f7
inst: don't hardcode /net/ether0, might have usb ethernet
2017-08-05 14:30:48 +02:00
cinap_lenrek
caddc9a6ea
inst: get rid of ppp configuration
2017-08-04 14:18:40 +02:00
cinap_lenrek
d5bbee50a0
inst: get rid of halt, just run fshalt in finish directly
2017-08-04 14:17:29 +02:00
cinap_lenrek
f777f7c421
inst: post newfs fileservers under /srv/$fstype.newfs to avoid conflict with preexisting local filesystem
2017-08-04 14:16:07 +02:00
cinap_lenrek
8fce6cb18b
cwfs: -n always overrides postservice() name, no matter if config mode changes service
2017-08-04 14:12:02 +02:00
cinap_lenrek
bb625cebfc
etheriwl: add pci id for Intel Centrino Advanced-N 6200 on x201 tablet (thanks arpunk)
2017-08-03 23:15:58 +02:00
cinap_lenrek
83b87729d9
usbxhci: handle out of memory in controller initialization
2017-08-02 21:17:50 +02:00
cinap_lenrek
1ea109345b
usbxhci: abandon multiple requests per endpoint, cleanup
...
more conservative approach: only one transaction in flight
per endpoint (except iso). also serialize controller commands.
no driver currently uses this and i doubt it is usefull.
create constants for common TRB flags and remove bogus 1<<16
flag on TR_NORMAL.
2017-08-02 20:25:19 +02:00
cinap_lenrek
8ed13fe664
usbxhci: have to serialize and set read pointer for endpoint stop command
2017-08-02 01:45:30 +02:00
cinap_lenrek
f001ddfdb5
disk/edisk: add some headroom in the type table for dynamic entries
2017-08-01 02:22:01 +02:00
cinap_lenrek
3c7eaa9d6b
disk/edisk: add more partition type uuid's from wikipedia (thanks qeed)
2017-08-01 02:08:58 +02:00
cinap_lenrek
5f23d78f06
usbohci, usbehci, usbxhci: save mmio base address in ctlr, cant PADDR() on 386...
2017-07-31 17:36:56 +02:00
cinap_lenrek
48352be825
usbxhci: provide shutdown function to halt the controller
2017-07-31 16:05:58 +02:00
cinap_lenrek
56ac6ea29e
nusb/*: cleanup
2017-07-31 15:29:08 +02:00
cinap_lenrek
b1d4e86064
nusb/usbd: support for usb3 hubs
2017-07-31 14:38:39 +02:00
cinap_lenrek
b4c1cf2ea1
libregexp: fix lexer so it doesnt move past the string when it gets a \ escape
2017-07-31 06:56:22 +02:00
cinap_lenrek
6e65596827
xhci: experimental usb3 support
2017-07-31 03:22:23 +02:00
cinap_lenrek
215b67ff3d
nusb/usbd: create endpoint files for conf #1 , usb3 preparation
2017-07-31 03:19:24 +02:00
cinap_lenrek
d46099e3af
usbehci: fix crash in cancelisoio() for highspeed device due to wrong pollival
2017-07-31 03:07:14 +02:00
cinap_lenrek
adfb0e9371
pc, pc64: enable usbxhci in the configuration
2017-07-29 01:15:05 +02:00
cinap_lenrek
cd108e2f0b
usbxhci: simplify xecp()
2017-07-29 01:12:32 +02:00
cinap_lenrek
c74538a67e
usbxhci: implement controller handoff, ignore usb3.0 ports, honor pollival for isochronous endpoints
2017-07-29 01:02:23 +02:00
cinap_lenrek
aaf6d7c558
usbxhci: basic iso write support (usb soundcard playback)
2017-07-24 23:48:50 +02:00
cinap_lenrek
a397bfd48c
usb: fix wrong pollival calculation in setmaxpkt()
2017-07-24 23:47:55 +02:00
cinap_lenrek
0b4ace02c4
usbxhci: handle changing maxpkt on control endpoint by reevaluating endpoint context
...
while endpoints != 0 are opend after the device descriptor has been
parsed and the endpoint properties like maxpkt have been set, the
control endpoint is opend with a guessed maxpkt value. once the first
8 bytes of the descriptor have been read by usbd, maxpkt gets set and
we need to reevaluate the control endpoint 0 context to update the value.
2017-07-22 19:35:32 +02:00
cinap_lenrek
f72bcce2c7
usbxhci: use physical register addresses for matcing controllers and printing. simplify endpoint slot initialization.
2017-07-22 16:37:05 +02:00
cinap_lenrek
f0217d2c3f
usbohci, usbuhci, usbehci: use physical address of registers for matching controllers and printing
2017-07-22 16:35:13 +02:00
cinap_lenrek
ffb28698bf
kernel: fix bounds check in screenputc()
2017-07-20 21:03:00 +02:00
cinap_lenrek
4fd68773e2
usbxhci: implement command timeouts and aborts, serialize unstall
2017-07-20 19:57:14 +02:00
cinap_lenrek
40dc39bf7d
usbxhci: better approach to unstalling endpoint and fixup td ring
...
instead of guessing where the controllers dequeue pointer went,
stop the endpoint and then explicitely set te dequeue pointer to
the next write td position. that way we do not need to fix the cycle
bit in the td's and dont need to rely on if the controller
advanced the dequeue pointer after a stall or not.
add ctx and slot back pointers to ring.
2017-07-17 21:10:25 +02:00
BurnZeZ
eee7357c27
hpost: delimit @filenames by newline so files with whitespace aren’t mangled
2017-07-17 04:56:09 +00:00
BurnZeZ
37e0d4ab29
hpost: fix field content mangling when newlines are present
2017-07-17 04:34:14 +00:00
cinap_lenrek
e7e18aac7f
pc kernel: mkfile target usbehcipc.$O needs ../port/usb.h, add usbxhci.$O
2017-07-16 22:33:24 +02:00
cinap_lenrek
5e6f1b5769
usbxhci: commit work in progress xhci driver, no config yet
2017-07-16 22:29:29 +02:00
stanley lieber
990a985836
/lib/{rob, rsc, theo}: Yup.
2017-07-02 15:49:44 -04:00
Ethan Grammatikidis
64195aea41
print(2): clean up vlong flag description
2017-07-02 19:12:50 +01:00
Ethan Grammatikidis
a4c35d47bf
rc(1): catch up with a change made long before 9front
2017-07-01 16:10:57 +01:00
Ethan Grammatikidis
4bcde1a30b
pc(1) clarification
2017-07-01 16:02:18 +01:00
cinap_lenrek
f58706f2cf
zynq: simplify initcode stack setup (just do it in init0 when the stack is mapped)
2017-06-28 18:57:13 +02:00
