the frequency tolerance used by timesync was from a 10th to 10 times
the frequency of the system clock! switching a system from tsc to pic
timer changes the system clock frequency from 300MHz to arround 1.8Ghz
on a x200s laptop resulting in time running way too slow or way too fast.
so we change timesync to only accept frequencies from half to double the
system clock which still seems huge, but at least catches the case above
resulting in timesync ignoring the old frequency file.
aux/wpa needs to reset its reply counter on deassociation to
properly restart key negotiation. we signal this with a zero
length read on the connections filtering for eapol protocol.
allow the driver to associate the node with a new aid right after
we receive the association response, not just when we transmit
a packet which usualy does not happen as eapol is initiated by
the access point so there are no transmit calls. we just call
transmit from the wifiproc with a nil block to introduce the node.
the splhi() and apictimerlock in the Mach isnt neccesary, as
portclock always holds the ilock of the per mach timer queue
when calling timerset().
as fastticks() and the portclock timers are all handled on a
per processor basis, i think it should be theoretically possible
for the lapics to run at different frequencies. so we measure
the lapic frequency for each individual lapic and keep them in
a per processor Apictimer structure instead of assuming them
to be the same.
loading the divider before programming one shot mode *sometimes*
gives the wrong frequency. (X200s got 192Mhz vs. 266Mhz, after
5 boot attempts)
also reload the divider after programming periodic mode. (from
http://wiki.osdev.org/APIC_timer)
dnauthdb() would relabel expired rr's as rr->db == 0 to make
them get garbage collected by dnage(). but this doesnt work
due to dn->keep and also causes the deduplication to fail on
rrattach() as rrattach1() handles rr->dn/rr->auth as separate
name spaces.
this causes duplicate entries in the rr's when ndb gets
gets changed. to fix, we just delete the expired (removed from
ndb) rr's immidiately in dnauthdb() instead of trying trick
dnage() to garbage collect it.
doesnt seem to be reliable. also, separate tsc frequency measurement
and cpu loopconst measurement. turned out with *notsc=, the simplcycles()
calls would mess up loopconst.
we previously used tsc only on cpu kernel. now that
we use it on terminal kernel too, there might be some
surprises ahead.
so make it possible to disable tsc for machines where
the tsc rate is not kept constant across cores or is
dynamically adjusted by power management.
depending on the font, poping the menu would move your cursor
one pixel down each time (due to division). this is annoying
when using a trackpoint and trying to repeat some operation
over 9000 times.
the cursor should only be moved when the menu is repositioned
to contain it on the screen.
- same problem with wstat, if we error then owner has been already updated...
- avoid smalloc while holding qlock in wstat, do it before
- pikeshedd style...
- wstat would half update the Srv data structure if name was too long
- srvname() walked the linked srv list without holding srv qlock
- dont access sp->chan while not holding srv qlock in srvopen()
- dont modify sp->owner while not holding srv qlock in srvcreate()
- avoid smalloc() allocations while holding srv qlock
- style pikeshedding, sorry
resizewin() has some extra logic making sure the rect doesnt get too big.
rio would otherwise refuse to create the window and the operation will fail
completely.
on usb ethernet, it can happen that we read truncated packets smaller
than the ethernet header size. this produces a warning in pullupblock()
later like: "pullup negative length packet, called from 0xf0199e46"
we cannot assume theres only one instance of an acpi table. some
bios have multiple SSDT tables and we would only find the first
one.
now, we keep a second array to record the physical address of
the table visited by maptable(). load all instances to the
SSDT.
- fix bogus execution of Else{} blocks
- always allocate Env in amleval()
- add Sleep() and Stall() instructions
- keep package size for packages with empty body
from test(1):
f -older t True if file f is older than (modified before)
time t. If t is a integer followed by the letters
y(years), M(months), d(days), h(hours),
m(minutes), or s(seconds), it represents current
time minus the specified time. If there is no
letter, it represents seconds since epoch. You
can also concatenate mixed units. For example,
3d12h means three days and twelve hours ago.
this means *without* [y M d h m s] unit, t is *absolute* time
in seconds since epoch.
If 64-bit multiply has to save both AX and DX, it could load the wrong value
into DX; also, biggen shouldn't allocate either AX or DX as temporaries
when using the template for MUL.
doing poolcheck should give us better context to figure out
what memory blocks / owners corrupted the blocks after free.
this is for hunting down a memory corruption seen in connection
with usb serial.
