* [NTOS:MM] section.c: Remove unused functions
MiSetControlAreaSymbolsLoaded(),
MiLoadUserSymbols():
Added on 436edb2 (r60802). Never used.
MiSubsectionConsistent():
Added on cda03c0 (r57209). Never used.
MiGetFileObjectForSectionAddress():
Added on 635d9ca (r67810). Calls removed on 0dfd233 (r68123).
MiSetProtectionOnSection():
Added on 9f28638 (r56317). Never used.
Plus,
MmCreateArm3Section():
Add an UNIMPLEMENTED on a specific case.
* [NTOS:MM] section.c: Use static instead of NTAPI for local functions
* [NTOS:EX] Various fixes for Daylight Saving Time transitions
* Fix automatic time changes when DST starts and ends.
* Currently it takes two cycles of the update provided by w32time to make the actual change.
* Convert Eric Kohl's TimeZoneID code contained in ExRefreshTimeZoneInformation to a new function.
* Use this new function in ExpSetTimeZoneInformation and ExRefreshTimeZoneInformation functions.
CORE-19290
Follow-up to commit 24a14abf2 (r57412).
HBelusca's comment:
> If this ExFreePoolWithTag() call was left commented, it's probably
> because, back in the day where I introduced it, there was a pool
> corruption that was detected, the source of which was unknown at
> that time. In retrospect, it is most probably the interrupt disconnect
> bug in IoDisconnectInterrupt() that was causing it. Now that this
> bug has been fixed just previously, it should be safe to re-enable
> pool freeing with tag.
- Fix annotations
- Don't use KiServiceExit to return to the caller with an error code, instead just return from the function, that is the same thing.
- Refactor failure path
- Add DPRINTs on failure
- Implement KiExceptionExit, which works like KiServiceExit2, but takes an exception frame as 2nd parameter
- Add a local exception frame to NtRaiseException and NtContinue, which is needed to exit with a full context on x64 and arm
- Use KeContextToTrapFrame again instead of KiSetTrapContext, since we have a proper exception frame now.
* [NTOS:CC] Restore unlock and reacquire locks around MmPageOutPhysicalAddress which was mistakenly lost in commit 2b14056
* Add bypass for problematic code path for now
ExAllocatePoolWithTag doesn't raise an exception on failure, only ExAllocatePoolWithQuotaTag does. Use that when quotas are relevant instead of silently continuing with a NULL pointer.
- Don't wait 1 second for each processor
- Use AFFINITY_MASK
- Use Prcb->Number, which is more future proof than KeGetCurrentProcessorNumber
- Improve for loop
The registers that are saved/restored in the trap / exception frame need to be consistent between all entry/exit points as well as the functions that convert between trap/exception frame and context. The trap frame contains only the non-volatile registers and rbp, the rest is saved in the exception frame.
The previous code didn't save rbp in the syscall handler, which led to it being clobbered when exiting though KiServiceExit2 rather than returning back to the syscall exit path. Also KeContextToTrapFrame would use rbx, rsi and rdi from the trap frame, which wouldn't be saved there by the syscall handler.
We need to save the missing registers in the trap frame before calling KiInitiateUserApc, because they will be used to create the CONTEXT that is saved on the user mode stack, where KiUserApcDispatcher returns back to using NtContinue. This fixes remaining failures in kernel32_apitest QueueUserAPC.
Both due-times and interrupt time are unsigned, but were treated as signed in KiInsertTimerTable, which led to very long (e.g. INFINITE) waits being interpreted as having a negative due-time and being completed instantly.
Mostly fixes kernel32_apitest QueueUserAPC
This is used in KiUserModeCallout instead of KiServiceExit2. The latter is broken, leaks non-volatile registers and will need to be modified to handle an exception frame, which we don't need/have here. It will also use sysret instead of iret and is generally simpler/faster.
Eventually it would be desirable to skip the entire trap frame setup and do everything in KiCallUserMode. This requires some cleanup and special handling for user APC delivery.
This also fixes delivering APCs from the system call handler, which previously would have clobbered rax. Also don't use the thread's TrapFrame member, which is not always set, when returning.
This is needed, because KiSystemCallHandler can be called multiple times for the same syscall entry, which would mess up the linkage. This replaces a previous hack and makes things cleaner.
In case of failure, ObInsertObject itself dereferences the object, so calling ObDereferenceObject one more time in the failure handler is redundant.
- Remove ObDereferenceObject call from CmpCreateRegistryRoot in case ObInsertObject fails.
- Add missing RootKey dereference if CmpCreateRegistryRoot failed to get the key cell (KeyCell).
CORE-17904
- Use an index for the table instead of ugly pointer offset
- Invert the check for GUI calls
- Fail with proper status code on invalid win32k syscall ids
This is required since while interrupts are enabled, another user APC could get queued and we want to guarantee that those are all delivered before returning to user mode.
A hive whose KCBs have a reference count of 0, meaning nobody is using these keys anymore, will not get removed from the cache table.
As a result during a normal hive unloading operation you will get orphaned KCBs which results in an unload failure.
This is wrong, because this is what a normal hive unloading is supposed to do. What it cannot do of course is that it cannot
scramble the references of opened keys by the users who use the Registry, as it is the job of force unloading mechanism to do that.
Also remove a misleading debug print. Force unloading works as intended by scrambling the references of keys and marking the KCB for deletion,
which is what how a force unload works. Namely Windows does exactly that.
CORE-10705
- Annotate the CmpEnumerateOpenSubKeys function with SAL2
- When removing an orphaned cached KCB, ensure that it is locked before clearing it from cache table entries
Problematic behaviour was added in commit a97f262ed (r26067), and
commit c39812d1b (r46193) converted to RtlUpcaseUnicodeString() call.
This was modifying the caller's given string. This is not really
a good practice to do so just to make display fancier.
For example, IopInitializeBuiltinDriver(), that calls the display
function, also uses the passed ServiceName later after.
Because IopDisplayLoadingMessage() executes only in SOS mode,
uppercasing the ServiceName in one case but not the other would
implicitly modify the observable OS behaviour.
IopSuffixUnicodeString() is adapted to be similar to RtlPrefixUnicodeString().
- Make the boolean SosEnabled from ex/init.c visible globally so that
it can be checked against by IopDisplayLoadingMessage().
- Also use RtlString* function to construct the string.
- Doxygen comments;
- SAL annotations;
- These two functions are local to driver.c file only -> static'ify them.
- 2 -> sizeof(WCHAR);
- Rename Length to NumChars;
- static const'ify the L".SYS" string.
Otherwise the USHORT members are aligned to 4-byte boundary space
which overflows the disk sector buffer and ultimately results in crash.
This can be reproduced by trying to format the USB drive with Rufus.
Also put some additional C_ASSERT checks for extra safety.
On the uniprocessor kernel KiAcquirePrcbLock is a stub that doesn't modify the current Prcb's PrcbLock value.
Quickly protect this assert around CONFIG_SMP
Fixed in x86 and ARM (this was already done in x64).
This is needed because thread preparation routine KxQueueReadyThread()
releases PRCB lock, but does not acquire it, so that the locking must
always be done outside the function, same as in all its other usage cases.
This fixes an assert from release PRCB routine, when booting x86 ReactOS
in SMP mode, because it attempts to release the lock when it is not
actually acquired.
Addendum to commit a011d19ed.
+ Add an assert in KxQueueReadyThread() to ensure the PRCB lock is actually acquired.
CORE-1697
Raise IRQL to SYNCH_LEVEL when exiting from the idle thread in the
idle loop, in case it is scheduled for execution. Then restore it
back to DISPATCH_LEVEL, after this is done.
This behaviour is a bit similar to the way it's done on x64.
This IRQL raise is necessary only in SMP builds.
Calls are placed in CONFIG_SMP ifdef: this avoids unnecessary IRQL
changes on UP, since SYNCH_LEVEL and DISPATCH_LEVEL are identical
there, unlike in MP, where SYNCH_LEVEL is IPI_LEVEL - 2 actually.
This prevents bugcheck DRIVER_IRQL_NOT_LESS_OR_EQUAL when booting
SMP x86 ReactOS, in KiTimerExpiration when calling it 2nd time.
The BSOD happened due to IRQL levels mismatch.
+ Improve related comments.
Registry hives are opened in shared read access when NT is loaded in PE
mode (MININT) or from network (the hives residing on a network share).
This is true in particular for the main system hives (SYSTEM, SOFTWARE,
DEFAULT, ...).
However, in PE mode, we can allow other hives, e.g. those loaded by the
user (with NtLoadKey) to be loaded with full read/write access, since we
boot from a local computer.
In particular remove some extra-parentheses around single code tokens,
and replace few "DPRINT1 + while (TRUE);" by UNIMPLEMENTED_DBGBREAK.
+ Improve some comments.
- Move the GUID_DEVICE_ENUMERATED event from the TargetDeviceChangeEvent category to the DeviceInstallEvent category
- Create a new function that handles DeviceInstallEvent category events
Co-authored-by: Victor Perevertkin <victor.perevertkin@reactos.org>
Introduce the initial changes needed to get other processors up and into kernel mode.
This only supports x86 as of now but is the first real step towards using other system processors.
Sometimes repairing a broken hive with a hive log does not always guarantee the hive
in question has fully recovered. In worst cases it could happen the LOG itself is even
corrupt too and that would certainly lead to a total unbootable system. This is most likely
if the victim hive is the SYSTEM hive.
This can be anyhow solved by the help of a mirror hive, or also called an "alternate hive".
Alternate hives serve the purpose as backup hives for primary hives of which there is still
a risk that is not worth taking. For now only the SYSTEM hive is granted the right to have
a backup alternate hive.
=== NOTE ===
Currently the SYSTEM hive can only base upon the alternate SYSTEM.ALT hive, which means the
corresponding LOG file never gets updated. When time comes the existing code must be adapted
to allow the possibility to use .ALT and .LOG hives simultaneously.
If FreeLdr performed recovery against the SYSTEM hive with a log, all of its data is only present in volatile memory thus dirty. So the kernel is responsible to flush all the data that's been recovered within the SYSTEM hive into the backing storage.
In addition to that, in some functions like CmFlushKey, CmSaveKey and CmSaveMergedKeys we must validate the underlying hives as a matter of precaution that everything is alright and we don't fuck all the shit up.
CmCheckRegistry is a function that provides the necessary validation checks for a registry hive. This function usually comes into action when logs have been replayed for example, or when a registry hive internals have changed such as when saving a key, loading a key, etc.
This commit implements the whole Check Registry infrastructure (cmcheck.c) in CMLIB library for ease of usage and wide accessibility across parts of the OS. In addition, two more functions for registry checks are also implemented -- HvValidateHive and HvValidateBin.
Instead of having the CmCheckRegistry implementation in the kernel, it's better to have it in the Configuration Manager library instead (aka CMLIB). The benefits of having it in the library are the following:
- CmCheckRegistry can be used in FreeLdr to fix the SYSTEM hive
- It can be used on-demand in the kernel
- It can be used for offline registry repair tools
- It makes the underlying CmCheckRegistry implementation code debug-able in user mode
CORE-9195
CORE-6762
During a I/O failure of whatever kind the upper-level driver, namely a FSD, can raise a hard error and a deadlock can occur. We wouldn't want that to happen for particular files like hives or logs so in such cases we must disable hard errors before toying with hives until we're done.
In addition to that, annotate the CmpFileSetSize function's parameters with SAL.
When shutting down the registry of the system we don't want that the registry in question gets poked again, such as flushing the hives or syncing the hives and respective logs for example. The reasoning behind this is very simple, during a complete shutdown the system does final check-ups and stuff until the computer
shuts down.
Any writing operations done to the registry can lead to erratic behaviors. CmShutdownSystem call already invokes a final flushing of all the hives on the backing storage which is more than enough to ensure consistency of the last session configuration. So after that final flushing, mark HvShutdownComplete as TRUE indicating
that any eventual flushing or syncying (in the case where HvSyncHive gets called) request is outright ignored.
