- When clearing feature port reset, remove the flag from Change and if the port is hardware enabled set the enable flag in Status.
- When checking port status, if Change has any flags set an SCE request most be completed. Verified while writing usbhub driver in xp.
- Probably fixes a case where an endless loop of completing SCE requests.
svn path=/branches/usb-bringup/; revision=51642
- Implement constructing CompatibleIds string using device descriptor. However, if the Class of the device descriptor is 0, then Class, SubClass and Prot which make up this string must come from the Interface.
- Change Ids and Descriptions to Unicode Strings.
- Move the creating of Id strings to one place, CreateDeviceIds, and called it at device creation.
svn path=/branches/usb-bringup/; revision=51641
- Some devices implement a default Language, LangId of 0. Some do not. Use LangId 0x0409 (English) until LangId is implemented.
- Remove an unused variable.
svn path=/branches/usb-bringup/; revision=51622
- The lower level driver completes the SCE IRP whenever the change state has been modified for a port. When handling the SCE IRP completion only check for flags in change state. The Change flags must be cleared else the hub driver will get non stop SCE IRP completions.
- Allocate IRP from Pool vice calling IoAllocateIrp. Dont free the IRP in the completion routine as the port driver, oddly, frees them.
- GetUsbDeviceDescriptor: Remove use of MDL and use only buffer instead to make our new usbehci happy.
- When calling the interface routines, correctly use the BusContext returned from the interface instead of the RootHubPdo. This worked on windows as it just happened they were the same.
- Implement RootHubInitCallbackFunction, which only job currently is to send the first SCE IRP.
- For Start Device for child device objects fake success for now. Will be implemented later.
- Implement returning IRP_MN_QUERY_IDs, IRP_MN_QUERY_DEVICE_TEXTs and IRP_MN_QUERY_BUS_INFORMATION.
- Add basic handling for IRP_MJ_POWER.
- Misc code changes.
svn path=/branches/usb-bringup/; revision=51620
- Implement retrieving drive capacity
- Use constant from scsi.h instead of defining own format
- Don't reset returned parameters length to zero, as ioctl handler might set it
svn path=/branches/usb-bringup/; revision=51608
- Make DeviceId generation to match ms usbstor
- Don't hardcode the device type in USBSTOR_PdoHandleQueryHardwareId
- Don't hardcode device type in USBSTOR_PdoHandleQueryCompatibleId
- Hackfix generation of instance id
- Add comments
- Cleanup code
- Usbstor now receives ioctl from disk.sys
svn path=/branches/usb-bringup/; revision=51582
- Add UsbDeviceHandle to child device extensions structure to be passed with URB requests.
- Reimplement the Worker Thread DeviceStatusChangeThread called on SCE completion. Each SetFeature and ClearFeature resend SCE request.
Only create the usb child device if the PortStatusChange member of the device extensions was modified.
- Implement CreateUsbChildDeviceObject used for creating a deviceobject for the USB device and initializing it.
- Implement GetUsbStringDescriptor for getting DeviceId, TextDescription and InstanceId from USB Device.
- Move the initial QueryStatusChangeEndpoint to after the hub device receives start pnp.
- USBHUB driver is now back to the same functionality of previous version. Showing the device wizard for connected devices.
svn path=/branches/usb-bringup/; revision=51581
- Rewrite hardware id / instance id matching
- Implement support for compatible id
- UsbStor still not attached to disk.sys, needs more research on how to get this done
svn path=/branches/usb-bringup/; revision=51580
- Change parameter name for DeviceObject in functions to clearify which device object is to received IRPs.
- Fix a typo in GetPortStatusAndChange that caused the function to return nothing for status and change.
- Call QueryStatusChangeEndpoint to send the first SCE request in Query Bus Releations.
- Complete implementation of StatusChangeEndpointCompletion. Queue a work item for DeviceStatusChangeThread, which will be used to initialize the usb device and create related device objects.
svn path=/branches/usb-bringup/; revision=51576
- Don't free device descriptor if it failed to acquire it
- Don't move out of usb configuration array. Found by special pool
- Fix bug when storing interface information which lead to a overwrite
- Implement retrieving generic type for device
- Fix bugs in QueryDeviceId
- Implement querying hardware ids
- Implement querying instance ids
- With these changes, usbstor now initializes and create pdo, which is also enumerated
- Needs more code / fixes so that disk.sys attaches to usbstor
- WIP
svn path=/branches/usb-bringup/; revision=51575
- Invoke status change callback at passive level
- Fill out usb descriptor struct instead passing everything in char array
- Use 1 byte interrupt endpoint packet size for hub for now
- Fill in interface information when SelectConfiguration request is passed. Fixes sce callback and pool corruptions
- Return device descriptor in USBHI_QueryDeviceInformation
- Tested in WinXP with special pool enabled & overrun support
svn path=/branches/usb-bringup/; revision=51572
- Start work on reimplementing UsbHub driver.
- Implement SubmitRequestToRootHub, QueryStatusChangeEndpoint, QueryInterface, GetPortStatusAndChange, SetPortFeature and ClearPortFeature.Handle QueryBusRelations.
- Partially implement PNP handling for FDO. When starting the device get all the information about the RootHub the driver will need and enable Power on all ports.
- Partially implement PNP handling for PDO, QueryId and QueryDeviceText.
- WIP
svn path=/branches/usb-bringup/; revision=51569
- Store number of bytes transferred in the transfer descriptors
- Perform queue head completion when the door bell ring has been acknowledged. Fixes race condition between multiple irps in the async list
- Fix calculation of transfer length when the request is an bulk in operation
- Use EndPointDescriptor member to access transfer type / pid direction
- Use MmGetSystemAddressForMdlSafe to retrieve system address for urb buffer
- Fix check if first transfer buffer finishes on first size if the size is of page_size
- With these changes and little luck and good weather, usb mass storage devices have been seen to work in Windows XP SP3
- Code inspired of mjmartin usbehci driver and Haiku's usb stack
svn path=/branches/usb-bringup/; revision=51506
- Port URB_FUNCTION_CLASS_INTERFACE from mjmartin usbehci driver
- Fix typo in interface declaration
- Disable assert for now
- Return irp status pending when irp is added to the queue
- Fix bug in InternalGetPidDirection
- More work on the bulk transfers, not yet working
svn path=/branches/usb-bringup/; revision=51501
- Fix a type causing CommitIrp to fail.
- Add a sanity check in StatusChangeEndpointCallBack to check that a pending SCE irp is queued.
- Start Implementing Bulk Transfers. Needs more work.
svn path=/branches/usb-bringup/; revision=51493
- Set the NakCountReload to 0 in the QueueHead that is set in the Async register, as this is a dead QueueHead marked as halted and does not need it.
- Set the Async register in StartController. Note: The Async and Periodic registers can only be modified when the controller is stopped.
- Driver now works in Qemu.
svn path=/branches/usb-bringup/; revision=51491
- hub_controller.cpp: Change RtlSetBit and RtlClearBit to RtlSetBtis and RtlClearBits for Win2k compatibility.
svn path=/branches/usb-bringup/; revision=51488
- Implement retrieving device / configuration descriptor for usb devices
- Based on mjmartin usbehci driver
- Mass storage device found wizard now pops up (fails to install - WIP)
svn path=/branches/usb-bringup/; revision=51478
- Move error checking if controller reported an error inside the door bell ring check block
- Extend interface of IUSBRequest to include DeviceAddress, which is needed to retrieve configuration descriptor of newly set address
- Allocate CtrlSetup from nonpaged pool
- Release setup packet on cleanup
- Devices now receive an device address
- Currently asserts while retrieving configuration descriptor as this code path is not yet existant
*** Assertion failed: Urb->UrbHeader.UsbdDeviceHandle == NULL
*** Source File: d:\usb-bringup\drivers\usb\usbehci_new\hub_controller.cpp, line 1118
svn path=/branches/usb-bringup/; revision=51477
- Change interface to return real async queue head
- Set the async queue head register after the controller has been started
- Enable async queue in StartController
- Port DumpDeviceDescriptor from mjmartin usbehci driver
- Remove pseudo queue head from usb queue, instead use the real async queue head exported from IUSBHardwareDevice
- Get physical address for transfer data in BuildControlTransferQueueHead
- Retrieving device descriptor now ~works, currently stops at setting device address (needs more work)
svn path=/branches/usb-bringup/; revision=51476
- Check if the current request type is supported (currently only control is supported, bulk will be implemented soon)
- Fix bug in IUSBRequest::CreateQueueHead
- Code runs now until first device descriptor get request (async / periodic queue not yet enabled)
- mjmartin usbehci status not yet reached
- Let the fun now begin ;)
svn path=/branches/usb-bringup/; revision=51474
- Cache port status & port change settings because it appears that some ehci controllers do not store the status reset register bit correctly
- This commit is a temporary solutions, needs to be reworked
- Return correct status from HandleClassOther
- Handle IOCTL_INTERNAL_USB_SUBMIT_IDLE_NOTIFICATION to return status success
svn path=/branches/usb-bringup/; revision=51473
- Return the physical address of the async queue head in CUSBHardwareDevice::GetAsyncListRegister
- Remove superflous entries from queue head structure, they are processed within IUSBRequest class
- Remove USBHI_GetPortHackFlags, this function has been deprecated
- Add interface functions for IUSBRequest / IUSBQueue
- Callback into IUSBQueue when a hardware interrupt arrives
- Implement callback function to check for completed queue heads / free completed queue head depending on the Async Advance interrupt bit
svn path=/branches/usb-bringup/; revision=51466
- Create member for storing the request object
- Add interface function which is invoked when the queue head should be freed
- Add support functions which deal with completed queue heads
svn path=/branches/usb-bringup/; revision=51440
hub_controller:
- Implement StatusChangeEndpointCallBack called by HardwareDevice class when port status has changed on controller.
- Move Status Change Endpoint query code to IQueryStatusChageEndpoint as it is also needed by StatusChangeEndpointCallBack.
usb_request:
- Implement InternalCreateUsbRequest.
usb_queue:
- Implement CreateUsbRequest and AddUsbRequest
hardware:
- Implement GetAsyncListRegister and GetPeriodicListRegister.
- Implement SetStatusChangeEndpointCallBack for setting callback and context. Call the callback when a port status changes.
- Initialize the UsbQueue after creating the AsyncQueueHead, as the UsbQueue calls will call back with GetAsyncListRegister.
svn path=/branches/usb-bringup/; revision=51407
- Fix warning because comparing signed vs unsigned
- Implement function for retrieving the device descriptor
- Implement function for retrieving a configuration descriptor (including contained interface descriptor and endpoint descriptor)
- Cleanup interface for IUSBRequest:
- When caller initializes IUSBRequest with an IRP, then the operation mode is asynchronously. Therefore when the request is completed, IUSBRequest::ShouldReleaseRequestAfterCompletion will return true, which makes IUSBQueue call Release on IUSBRequest
- When the caller initializes IUSBRequest with an setup packet, the operation mode is synchronously. After submitting the IUSBRequest to queue, the caller should call IUSBRequest::GetResultStatus. This function will then block untill the operation has been completed. However, the caller needs to call Release() as those requests are not cleaned up by the IUSBQueue
svn path=/branches/usb-bringup/; revision=51406
- Initialize the MemoryManager only after allocating a CommonBuffer to pass to it.
- Create a QueueHead to put into the AsyncList Register.
svn path=/branches/usb-bringup/; revision=51402
- hub_controller: Implement Status Change Endpoint for RootHub.
Handling the URB can return STATUS_PENDING, as in the new SCE code. Check for this before completing the Irp.
Uncomment calls to PortStatus, SetPortFeature, and ClearPortStatus now that they are implemented.
- For function receiving a port number check that its not larger than the actual number of ports on the controller.
svn path=/branches/usb-bringup/; revision=51401
- Move USB_REQUEST_SET_FEATURE / USB_REQUEST_GET_FEATURE flags to header file.
- Remove QueueHead and Descriptor creation as its in UsbRequest.
- Move DMACommon Buffer allocation back to UsbHardwareDevice class.
- Implement Port Handling functions GetPortStatus, ClearPortStatus and SetPortFeature.
- Implement GetUSBQueue for returning pointer to UsbQueue and GetDMA to return DMAMemoryManager.
- Fix a typo in one of the defines for Port Register Flags.
svn path=/branches/usb-bringup/; revision=51397
- Use PQUEUE_HEAD as the Head of pending list and Async (Active) list vice using PLIST_ENTRY.
- Implement linking/unlinking a QueueHead to these Head QueueHeads.
- Implement chain linking/unlinking of QueueHeads. Thr plan being to used these functions during DMA operations to pull a number of QueueHeads from the pending list to place into the Async list for execution.
- Will look for optimization in these functions later.
svn path=/branches/usb-bringup/; revision=51390
- Use LIST_ENTRY in QueueHeads and Descriptors vice Next and Previous Pointers.
- Add functions to interface for setting AsyncListRegister and PeriodicListRegister.
- USBHardwareDevice: Initialize USBQueue when handling PNPStart.
- USBQueue: Allocate Common Buffer and use it to Create and Initialize DmaMemoryManager object.
- USBQueue: Implement CreateQueueHead and CreateDescriptor.
svn path=/branches/usb-bringup/; revision=51388
