"" looks for patterns in the form 'prompt;' or 'prompt%',
and gets confused when proof emits 'illegal;'. This change
replaces the ';' with a ':', which both matches other
conventional error outputs and prevents "" from getting
confused.
Initially the code tried to guess the date format. This
turned out to be a bit too magical, so the feature was
removed, but the manpage still documented the nonfeature.
As long as the client as the mouse file open
and maintains reading the winname file of the window
after a resize we will avoid drawing the text frame
on a resize as it will be overdrawn by the client.
This reduces flicker on resize somewhat for slow systems.
This implements proper intrdisable() support for all
interrupt controllers.
For enable, (*arch->intrassign)(Vctl*) fills in the
Vctl.enable and Vctl.disable pointers with the
appropriate routines and returns the assigned
vector number.
Once the Vctl struct has been linked to its vector
chain, Vctl.enable(Vctl*, shared) gets called with a
flag if the vector has been already enabled (shared).
This order is important here as enabling the interrupt
on the controller before we have linked the chain can
cause spurious interrupts, expecially on mp system
where the interrupt can target a different cpu than
the caller of intrenable().
The intrdisable() case is the other way around.
We first disable the interrupt on the controller
and after that unlink the Vctl from the chain.
On a multiprocessor, the xfree() of the Vctl struct
is delayed to avoid freeing it while it is still
in use by another cpu.
The xen port now also uses pc/irq.c which has been
made generic enougth to handle xen's irq scheme.
Also, archgeneric is now a separate file to avoid
pulling in dependencies from the 8259 interrupt
controller code.
Plan 9 memcpy(2) uses the same implementation as memmove(2) to handle
overlapping ranges. Hovewer, the MIX MOVE instruction, as described
in TAOCP, specifically does not do this. It copies words one at a
time starting from the lowest address.
This change also expands the address validation to check that all
addresses within the source and destination ranges are valid before
proceeding.
Fixes 3 issues in our upas mkfiles:
- mk/mkfile and send/mkfile were rebuilding
only the rfc822.tab.$O, even though the
header also needed to be rebuilt.
- CLEANFILES had a pattern that would not
get expanded.
- Third, ../upas/mkfile was being included
in the wrong place and making the wrong
rule default.
currently the EFI loader's behavior is to search all disks in a
firmware-defined order. we search the list returned by the firmware
in reverse order in the hopes of searching the first 9FAT instead of
the ESP, but this results in unintuitive behavior when there are
multiple FAT partitions (possibly in multiple disks), such as loading
a plan9.ini and kernel from a different disk than the one you executed
the EFI loader from.
to resolve this, we change the EFI loader to instead prefer read
plan9.ini and the kernel from the same disk as the EFI loader was read
from, and then fall back to the old behavior, since the old behavior
is relied on by current installations.
dc crashes because a Blk* sometimes ends getting double freed.
To make it crash, any of these lines will do:
(each line is a separate input to dc):
1 sa 2 :a le d sa v :a
1 sa 2 :a le d sa :a
1 sa 2 :a le d sa c
Fix by assigning p to sptr->val before EMTPY causes a jump.
Additionally, dcgetwd() can return 0. all other uses check for
0 ptr; Also fix a buffer overflow.
It appears that our IDT overlaps with the data structures
passed from grub in multiboot load.
So defer setup of the interrupt table after the multiboot
parameters have been processed.
The driver used to register the interrupt handler just
after reset, tho the Ctlr struct, including the buffer
descriptor arrays where only allocated on attach.
This moves most of the reset/init out of pnp
function and into attach. This also means we can
error out and even retry on the next attach.
The logic of the reseter kproc has been changed:
now it is only started once the first initialization
completely succeeded. This avoids the strange qlock
passing.
Implement a shutdown function so the device gets
halted for /dev/reboot.
Assume 64 bit physical addresses for dma.
Check that pci bar0 is actually I/O.
the hid 1.11 specification says that for hid devices which arent in
the boot subclass (subclass 1), it is only optional to support the set
protocol command. for my devices, trying to set protocol results in a
stall error and unusable devices.
fixes my Tex Shinobi keyboard and Playstation 4 controller.
The new MTRR code handles overlapping ranges
and supports AMD specific TOM2 MSR.
The format in /dev/archctl now only shows
the effective cache ranges only, without
exposing the low level registers.
Before the "native" awk work, a call to the fflush function resulted
in one or more calls to the APE fflush(2).
Calling fflush on a stream open for reading has different behavior
based on the environment: within APE, it's a no-op¹; on OpenBSD, it's
an error²; in musl, it depends on whether or not the underlying file
descriptor is seekable³; etc. I'm sure glibc is subtly different.
Now that awk uses libbio, things are different: calling Bflush(2) on a
file open for reading simply discards any data in the buffer. This
explains why we're seeing truncated input. When awk attempts to read
in the next record, there's nothing in the buffer and no more data to
read so it gets EOF and exits normally. Note that this behavior is not
documented in bio(2). It was added in the second edition but I haven't
figured out why or what depends on it.
The simple fix is to have awk only call Bflush on files that were
opened for writing. You could argue that this is the only correct
behavior according to the awk(1) manual and it is, in fact, how GNU
awk behaves⁴.
1. /sys/src/ape/lib/ap/stdio/fflush.c
2. https://cvsweb.openbsd.org/src/lib/libc/stdio/fflush.c?rev=1.9
3. https://git.musl-libc.org/cgit/musl/tree/src/stdio/fflush.c
4. https://git.savannah.gnu.org/cgit/gawk.git/tree/io.c#n1492
Changeset 50ad211fb12f broke the libcommon rule in
mkupas. Deleting the 'mk clean' in the recipe fixes
this.
Cleanup includes deleting UPDATE vars from all mkfiles,
reorganization of vars in TARG,LIB,OFILE,HFILE order,
and deletion of extra vars used for UPDATE.
loading the interrupt vector table early allows
us to handle traps during bootup before mmuinit()
which gives better diagnostics for debugging.
we also can handle general protection fault on
rdmsr() and wrmsr() which helps during
cpuidentify() and archinit() when probing for
cpu features.
before removing the double map at 0, load our
initial gdt pointer with its new KZERO based
virtual address.
this is prerequisite for handling traps early during
bootup before mmuinit() loads the final gdt.
The fsdestroyfid() is called regardless if the open succeeded
or failed. This causes erroneous videoclose() when opening
the frame or video file while the camera is active.
When using /dev/reboot, the MSI vecor might have already
been setup causing interrupts to fire on the designated
cpu while we send the commands to the card.
reseting irbsts bits in hdacmd() only works
while interrupts are disabled during hdareset().
once interrupts are enabled we need to reset the
irbsts bits in the interrupt handler or else the
interrupt never clears and locks up the system.
Upas/marshal -F was broken with the '-8' command, and silly
without it: It used aliases passed on the command line, so
the destination address was ignored with -8 was passed.
In addition, it would create a new mailbox for any aliases
being sent to, instead of putting them all in one location.
The new -S option is similar to -F, but specifies where the
message should go.
The change 3306:c5cf77167bfe made the code reuse MTRR slots
of the default memory type.
But this did not take overlapping ranges into account!
If two or more variable-range MTRRs overlap, the following rules apply:
a. If the memory types are identical, then that memory type is used.
b. If at least one of the memory types is UC, then UC memory type is used.
c. If at least of of the memory types is WT. and the only other memory type
is WB, then th WT memory type is used.
d. If the combination of memory types is not listed above,
then the memory type used in undefined.
It so happend that on a Dell Latitude E7450 that the BIOS defines
the default type as UC. and the first slot defines a 16GB range
of type WB. Then the rest of the ranges mark the PCI space back
as UC, but overlapping the first WB range! This works because
of rule (B) above.
When trying to make the framebuffer write-combining, we would
falsely reuse one of the UC sub-ranges and making the UC memory
into WB as a side effect.
Thanks to Fulton for his patience and providing debug logs and
doing experiments for us to narrow the problem down.
