empty href="" attribute in base-tag causes the page to break.
while at it, handle empty attributes in other parts of the
code as well. (mostly stuff like id, name shouldnt be empty)
the frequency tolerance used by timesync was from a 10th to 10 times
the frequency of the system clock! switching a system from tsc to pic
timer changes the system clock frequency from 300MHz to arround 1.8Ghz
on a x200s laptop resulting in time running way too slow or way too fast.
so we change timesync to only accept frequencies from half to double the
system clock which still seems huge, but at least catches the case above
resulting in timesync ignoring the old frequency file.
dnauthdb() would relabel expired rr's as rr->db == 0 to make
them get garbage collected by dnage(). but this doesnt work
due to dn->keep and also causes the deduplication to fail on
rrattach() as rrattach1() handles rr->dn/rr->auth as separate
name spaces.
this causes duplicate entries in the rr's when ndb gets
gets changed. to fix, we just delete the expired (removed from
ndb) rr's immidiately in dnauthdb() instead of trying trick
dnage() to garbage collect it.
resizewin() has some extra logic making sure the rect doesnt get too big.
rio would otherwise refuse to create the window and the operation will fail
completely.
from test(1):
f -older t True if file f is older than (modified before)
time t. If t is a integer followed by the letters
y(years), M(months), d(days), h(hours),
m(minutes), or s(seconds), it represents current
time minus the specified time. If there is no
letter, it represents seconds since epoch. You
can also concatenate mixed units. For example,
3d12h means three days and twelve hours ago.
this means *without* [y M d h m s] unit, t is *absolute* time
in seconds since epoch.
If 64-bit multiply has to save both AX and DX, it could load the wrong value
into DX; also, biggen shouldn't allocate either AX or DX as temporaries
when using the template for MUL.
to fix this, make genwww return 0 if w->url is nil and output an error message when attempting to access selection if it's nil. the problem with the w->url fix is that after clicking on the url scroll bar, an empty url history row could be highlighted by clicking on it. fix this by making sure lp->lo is not less than zero.
pread does not guarantee that it would read all the data asked for.
But acme usage of disk assumes that. This issues as many reads as
needed to make acme work when read returns less data than it wanted.
the integer division instructions are emulated with _div()
function patched in by 5l which does not handle conditional
execution. so do not optimize away the branch in that case.
specifing -d on the command line now only disables synchronous
drawing events.
- use threaded mouse and keyboard to allow for asynchronous
receoption of quit messages. this allows plot to exit before drawing
is completed. for programs like mapdemo, this is important.
there were two things that needed to get fixed as a result
- replace fprint(2, ...); exits("bad"); with sysfatal. also get rid
of stdio.
- dpoint needed a mach-dependentent (sic) version. otherwise
points on a resized screen will not be properly placed.
Charles Forsyth described the problem below in:
http://9fans.net/archive/2013/04/190
In a few cases, the kernel will use pprint to put a diagnostic on the
standard error (file descriptor 2). One of those is a warning that the
process has used more than 100 file descriptors. That message is possibly
obsolete and could be removed, but there are others, such as notifying an
uncaught trap that are probably helpful to make visible. In any case, as
things stand, a busy exportfs might have many file descriptors open,
provoking the diagnostic. Unfortunately, aux/listen and aux/listen1 connect
file descriptor 2 to the incoming network connection. If the connection's
protocol is not a simple, unstructured, textual one, diagnostics on the
standard error will cause confusion, in particular to devmnt.c if 9p is used.
/rc/bin/service files that start applications that run special protocols
might want to redirect file descriptor 2; alternatively, perhaps aux/listen
shouldn't redirect fd 2 by default: the few commands that do connect the remote
user to shells, or equivalent, including telnetd and sshd could dup 1 to 2
when that was sensible.
overriding aborttime in udpquery() makes no sense. it causes
recursive queries to extend the timeout infinitely. nobody
but the issuer of the request should modify aborttime.
in wpa2, the rsc field of the eapol message3 is the packet number for
*group* messages that the ap will use as there is no separate group
key message. in wpa1, we use it for the peerwise key.
store errno on the private process stack so its always per process
and not just per memory space. errno itself becomes a macro
dereferencing int *_errnoloc; which is initialized from main9.s
pointing to the private stack location.
various fixes in programs that just imported errno variable with
"extern int errno;" instead of including <errno.h>.
diskparts fails on thinkpad x200 sdcard reader if we dont
give the unit some time to startup. the device took about
100ms to become ready so status poll loop with a long
timeout would be overkill.
1. Go group spotted that a slightly-obscured pointer move was done by AMOVL not AMOVQ.
2. Inspecting the code further, I noticed that other pointer types were set to TLONG not TIND,
causing similar truncation of pointers to 32 bits.
Fix the behavior of exportfs -r.
Check the return of chdir(srv) to prevent exporting accidentally
the current working directory when the directory specified
with option -r doesn't exist.
Also fix at the same time the missing trailing \n in error
messages printed just before exits().
we gave wrong content-length in range requests. r->stop - r->start
is wrong because r->stop is the byte offset of the *last* byte, not
the *next* byte after the last.
Another band-aid fix to the usb mouse driver, to cope with a mouse which has
an interrupt endpoint number 3 but no number 1 or 2, and a report descriptor
more than 128 bytes long.
we used to do getbuf() with nodata flag so it only worked when
we where lucky and got the same in memory block back. this
is uncritical once you have reamed the filesystem, its just
that sometimes ream would fail with "ream successfull, then
hjfs: fsinit: file ./hjfs not found".
we have to run the 9p service process in its own namespace
otherwise the attach filename might point onto the served
filesystem causing it to deadlock. this happens especially
if 9660srv is used as root filesystem. (cdboot)
if a window gets hidden/unhidden/resized too fast, the client might have no
chance attaching to that image using winname. so we move the window
offscreen instead and delay the freeimage() by doing it in the deletethread().
some devices freeze up with inqiry allocation length
other than 36 bytes. as we do not really care about
the vendor specific part of the inquiry, lets only do
36 byte inquiry for now.
previously, we had to maintain 3 sets of pci vid/did's:
1) in /lib/vgadb for detection
2) in the userspace driver in aux/vga
3) in the kernel mode driver
this change makes the kernel mode driver more dumb in
the cases where possible. we let userspace do the pci
enumeration and if needed, it can set the pci address
of the vga card. kernel mode drivers can assume to get
the right pci device passed in scr->pci for enable()
and linear() functions and just do very basic sanity
checking before mapping framebuffer and mmio regions.
vgalinearpciid() was removed as userspace is responsible
to pick pci device.
theres a new vgactl message "pcidev" where userspace
can set the bus address. we initialize scr->pci in
vgareset() to the first pci graphics card found. this
should cover cases when an old aux/vga binary is used
that doesnt use the new pcidev message.
userspace drivers will now use the pci device that got
a match from /lib/vgadb and skip ther own enumeration.
this way, vga cards can be made to work by simply adding
an entry in vgadb with no need to modify userspace or
kernelspace drivers. this is not always possible if
the driver derives information from the specific card
model.
after some thought, the file attachment headers Attach: and Include:
(before Inline:) are more like the Subject: line and should be interpreted
every time.
mouse acceleration can be done by software in the kernels
devmouse device like:
echo hwaccel off >/dev/mousectl
echo accelerated 5 >/dev/mousectl
it is hard to pass nusb/kb parameters anyway as it is started
from nusbrc in bootfs.paq, so i remove the option.
Bread() always reads exactly nbytes of data if it can. only
when it reaches end of file or an error it will return less.
so the Breadn() function that was introduced has been removed.
sorry for the confusion.
instead of forcing mouse to boot protocol, which often
doesnt work, we set it to report protocol and parse
the hid report descriptor. if thers no such descriptor
we revert to boot protocol.
all mouse packet parsing is done by report parser,
even for boot protocol. also all the work arrounds
for the leadbyte hack (report id?) are removed.
keyboards should not be affected by this change.
to support µ-law audio embedded in wav and big endian pcm
in sun audio files the µ-law and a-law and big endian integer
decoding was added to pcmconv. sundec now parses the sun
audio header supporting stereo now.
there are devices which do not return a string if used
with invalid language id, so at least try to use the first
one and choose english if failed.
this fixes CDC ethernet for N900
allow attach as none. (this was supposed to work but it
doesnt for 9p2000 because we have to check for
afid being NOFID instead of checking the uname string).
and add "nonone" flag to disable this.
fix repeatproc timeout handling, add constants for Kbdelay
and Kbrepeat.
set procname so one knows which is keyboard and which is mouse
and on what endpoints they work.
9front's /dev/mousein and /dev/kbdin allow multiple opens,
so theres no need for the refcounted Kin structures.
spawn the worker procs in ther own note group, so they wont
get killed on interrupt in the original notegroup.
when -8 flag is given, upas/marshal override To:, Cc: and Bcc: headers.
add -B option for Bcc. it is also now valid to pass recipient list
on upas/marshal arguments and have -8 flag set. make nedmail and
/rc/bin/mail call upas/marshal with -8 now to make it effective.
handle short reads as errors and retry. this can happen
on ohci and some ps2 to usb converter. it might'v deen caused
by a recent change on sources handling td overrun differently.
fix error handling. have to check f->ep == nil after recovery
and check packet size. also, use f->ep->dfd instead of ptrfd
and kbdfd as it might be different after recovery. make a
setleds() error non fatal.
boost process priority for keyboard and mouse worker processes.
cleanup: use single write() in putmod(), improve error reporting.
lazily close revlog files and keep up to 8
revlogs arround. also cache the latest extracted
file descriptor of a revision in the revlog.
this avoids the quite expensive reextracting/patching
when we reopen the same file revision.
dont use the racy mktemp()/create, instead create
a uniqueue name and create with OEXCL. this also
avoids a bunch of access() calls.
fix eof case and use pread() in fcopy() to avoid the
seeks.
dont modify changelog temp file but simulate trailing
newline instead.
check for write premission in the parent directory
for open with ORCLOSE. honor CHFNOPERM not just in
chancreat(), pikeshedd the error handling. added
estrdup()/erealloc() that call sysfatal instead
of returning nil.
getdent() introduced a bug as the qid check fails in
the case when we walk to DUMPROOTQID, but get ROOTQID
in the directory instead.
newentry() getblk(..., GBCREATE) caused the whole
directory to get dumped until it hit a free slot.
we cannot do this because this changes the addresses
of Dentries of files but doesnt update the loctree.
this caused the bogus walks when we hit a different
directory than we expected.
what we do now is the following: newentry() was changed
to never dump anything. it will just read the directory
and return a the address of a free slot or create a
new block having space for one. chancreat() then makes
a loc in the loctree for the free slot, drops the dirent
buffer and calls willmodify() on the new slot. this will
dump the block containing the slot (and possible other
slots) and updates the loctree to the new version.
after that, chancreate() modifies the slot filling the
Dentry. there should be no race, as newentry() skips
slots that have a loc in the loctree.
theres one case where newentry() can dump the block
immidiately when it is called from dump. added new
parameter for that and documented in the comment.
createuserdir() was simplified by just calling chancreat().
to get arround the permission check, a new per channel
flag CHFNOPERM was added.
always check if the directory entry qid from the loc still
matches the one on disk before doing anything. helps
catching bugs and is basically equivalent to what cwfs does
with its checktag.
make a haveloc() check in newentry() to make sure we dont
allocate a file slot thats still in use, but deleted.
this seems to fix the NPROC>1 build problems.
This patch adds client TLS authentication to libsec in compliance with
rfc 4346.
A new -c flag has been introduced for tlsclient allowing the user to
specify a certificate in pem(8) format which will be provided to the
server upon request.
A -D debug flag has been introduced to enable debugging output.
The patch has been tested against OpenSSL 0.9.7j 04 May 2006.
It exists today because of the great (debugging) help and insight
provided by Matthias Bauer.
TODOs:
- specification of a certain client key in factotum is not possible at
the moment
- tlssrv should support this too
These will get added in another patch.
The first try to submit this patch failed due to a network error.
Sorry for the duplication!
Kind regards,
Christian
