we'r getting a rectangle taller than a single line from
coladd() which causes textresize() to collapse the tag
text to zero height.
should probably fix coladd() instead.
introduce kernel inspured Block structure with
read/write pointers to pass packets arround.
the intend is to avoid copying when adding/removing
frame headers and simplifying the drivers.
the driver now calls etheriq() directly allowing it to
queue multiple packets in one pass without having
to keep state.
transmit gets a buffer passed that has room for
frame headers and trailers so no copying is needed.
blocks are refcounted avoiding another copy when
passed to only one receive queue (common case).
receive queues are now limited to 100KB avoiding
buffer bloat.
Dq* a memory leak in destroyfid has been fixed.
lots of minor cleanups.
from: http://9fans.net/archive/2013/04/327
since <compose>x is not yet entrenched, i have a suggestion for ease of
input. suppose <compose>x were redefined so the syntax were
"<compose>x[0-9a-f]+;". in the case that 6 hex digits are entered, then
the ";" is not necessary.
not only would this allow for entering 21-bit runes, it would also allow for
short sequences to be entered more easily.
- erik
using strlen() gives the number of bytes in the utf-8 string.
could use utflen() instead, but decided to just go in a loop
and get rid of the counters all together.
UTF-16 surrogates are not handled.
the process is *NOT* allowed to exit after a srvrelease() as
it still holds a reference (srv->rref) preventing the srv
from beging freed/ended (listensrv) before srvacquire().
ethernet packets with sizes that where not multiples of 4 where
discarded because the check uses the smsc frame size instead of
the payload size. when a usb read returns just one packet, theres
no next frame header and the calculated frame size is bigger than
the usb read which caused the whole packet to be discarded as invalid.
thanks to mischief for testing and debugging!
usb is bound after /dev, so a hanging usb device will hang
access to /dev. we avoid this by releasing the srv, which
allows the fs to still handle reads and walks of the
directories.
ios are serialized by a qlock in the Umsc structure.
add checktag and nil checks in cfsdump() making sure to notice
when the roroot directory structures is corrupted.
cwrecur() used tag == Tsuper to indicate that this is the first
level recursive invocation. this is confusing as we really expect
Tdir tag in that case for the root directory. instead, we now
pass the correct tag (Tdir) and use cw->depth > 1 to see if we
are past the root.
the block tag was only checked when the block was not in
the memory cache. check the tag always!
fork child exportfs with new rendezvous group.
fix missing close of pipe filedescriptors on error.
fix missing close of other end of pipe in child.
dont bark when we get eof on the first init string read.
this condition can happen when unmount opens and
immidiately closes a exported srv file.
running page in own note group avoids killing it when we
exit mothra.
copypaste dupfds() function from page and use it to close
unneeded file descriptors.
we are not using stdout (fd=1) and it, so dup nullfd over it.
this drops the old window reference when using with -w flag.
the RFNAMEG flag isnt needed because we are calling newwindow()
which forks the namespace for us.
reopen stdin/stdout for the external viewer to the new window.
newwindow() used to mount the new window directly on /dev, resulting
in the old window and the new one being mounted over each other.
we now try to unmount the old window from /dev first, mount new
window to /mnt/wsys (replacing the old) and then bind /mnt/wsys
before /dev.
if theres no /mnt/wsys, just mount window directly before /dev.
dont rely on postnote to shutdown client. instead, make reads on
cons, kbd and mouse error. when we mount a window system over
exportfs, the pid useless and even dangerous! pid should be
only used by clients forked by rio itself.
fix bug in resized(), goodrect() takes rect in screen coordinates!
make rectonscreen() fix window size if the window doesnt fit
on the screen.
improve goodrect() to check for windows outside of the screen or
bigger than screen without borders visible.
the openbsd sis(4) driver does not actually go through the rest
of softreset() with sis cards. also, rev 635 reads the mac address
differently, so copy-paste code from openbsd to handle that.
the automatic routing from jack to dac/adc sometimes gets us
a path thats not audible. manually specifying a route path
gets us arround these. the syntax is just a comma separated
list of node ids in the "pin" and "inpin" audioctl commands
instead of a single pin node id.
to find alternative paths, audiostat now lists all the widgets;
not just the pins; and ther input connections.
initially mute all pins and amps of all function groups.
connectpath() and disconnectpath() will mute and unmute
the widgets as required later.
forkret() labels the instructions that can raise exceptions
so they can be handled in trap(). this can happen when
segment descriptors get invalidated.
the standard is i/o bar 0 is the mixer and bar 1 is status/control.
the magic with the bar sizes made it fail in qemu. so removing it
for now as all devices seen so far comply to the standard.
if we ever see a sis7012 where this might be swaped uncomment the i=0;
the busywait timeout is too long in ac97mixreset() because rd/wr
have a timeout on ther own. just remove the busy looping and do
a one second delay after mixer reset. (tested with t23)
semaphore locks have much higher overhead than initially presented
in the "Semaphores in Plan9" paper. until the reason for it has been
found out i will revert the changes.
validaddr looks up the segments for an address range
and checks the flags and if the address range lies
within bounds on the segments.
as we'r going to lookup the segment in the syssem*
syscalls anyway, we can do the checks ourselfs avoiding
the double segment array lookups.
the implication of this tho is that now a semaphore cannot
span multiple segments. but this would be highly unusual
given that segments are page aligned.
smart boot manager has a "FAT" signature in its mbr causing
9bootfat to "detect" it as a fat filesystem and then fails
to find plan9.ini.
there shouldnt be a fat filesystem on harddrives at block 0, only
on floppy drives. but some bioses use floppy drive numbers
for usb harddrives so still check for a partition table.
thanks aap for debugging this.
On ARM, it turns out that comparisons with NaN can be made to do the
right thing with no code penalty, by a more careful selection of
condition code values in the subsequent conditional branch. The
meaning of the CC bits in the PSR is subtly different when they've
been copied from the floating point status register.
Suggested patch is 5c-nan-cmp (works on both vfp and emulated arm7500).
the changeset r541ead66e8af:
"libdraw: make ebread() return buffer immidiately if available"
makes mouse sluggish when the program cant keep up as mouse
events queue up. this more or less restores the original
behaviour but only for mouse events.
when the screen is resized, we scale the windows to
match the new screen size. when the screen is too
small tho, the scaled down window rect might result
in a bad window rect. before, we kept the window
in its original position and size making it possible
to move a window out of the screen by resizing its
outer rio.
now, if we get a bad rectangle after scaling, we
just tralslate position to the new scaled r.min
point but preserve its orginal size. this keeps
the window always accessible.
we loaded APMDSEG instead of APMDSEL into DS. (ouch!)
its not really clear why we loaded DS (wong) in the
first place as bios is supposed to do this. for the
machines where this worked it could have no effect
anyway because it was wrong so removing the DS load
and just zero all segment registers.
we cannot do:
cmdpid = rfork(... RFMEM);
because cmdpid is a global variable in the data segment
and hence shared between parent and child process. use a
temporary variable on the stack.
- TLSconn structure on stack but not initialized (zeroed)
- original filedescriptor double closed in error case
- original filedescriptor leaked in success case
- leaked TLSconn.sessionID and TLSconn.cert
- clarify in pushtls(2) and pushssl(2)
new io interface was added. user defines amlmapio() and amlunmapio() functions
that will fill out Amlio structure with function pointers to read/write
routines for a particular region.
amlnew() function added allowing the creation of aml objects like buffers
or packages. these can be passed to amleval() with b, p or * format.
amltake()/amldrop() exclude an aml object from garbage collection.
on load, names are not always resolvable until the whole table is loaded.
for this, we create n objects that are just name strings. after load, we
recursively traverse the namespace and resolve them (see fixnames()).
the FindSetLeftBit and FindSetRightBit opcodes got implemened.
the difficulty is freeing items while parsing because items might already
be linked into various linked lists like in docinfo.images or form.fiels.
so we link images, tables and formfields to the docinfo as the final step
of getitems() pass using the new recursive function linkitems(). as only
reachable items get linked theres no danger of dangeling pointers.
always look for 9fat in plan9 partition even tho the partition
is *not* maked active. marking partitions active is not
recommended anymore with grub so this makes life easier for
some people. multiple plan9 partitions on a single drive
is not supported.
have to copy partition table as buf gets trashed when reading
first block of fat partition. it worked only when the first
fat partition found (the one marked active) was the right one,
but conffat() can fail.
png: colorspace will never be CYCbCr (this is no
doubt from copy-pasting from jpg)
tif: everyone else uses colorspace as a function
argument, so we will too
readtif, writetif: credit paul bourke
Port Reset R/W. 1=Port is in Reset. 0=Port is not in Reset. Default = 0. When
software writes a one to this bit (from a zero), the bus reset sequence as defined in the
USB Specification Revision 2.0 is started. Software writes a zero to this bit to terminate
the bus reset sequence. Software must keep this bit at a one long enough to ensure the
reset sequence, as specified in the USB Specification Revision 2.0, completes. Note:
when software writes this bit to a one, it must also write a zero to the Port Enable bit.
Note that when software writes a zero to this bit there may be a delay before the bit
status changes to a zero. The bit status will not read as a zero until after the reset
has completed.
openmode() can raise error with invalid mode passed, but we already
incremented the exclusive mouse refcount at that point! call openmode()
early to avoid this.
spawn a kernel process to check the broken state of the controller.
if the firmware crashed, or rfkill was toggled we will reset and
reboot the firmware. also power down the card when rfkill is off.
double the td abort delay and make sure the tsleep() isnt
shortened by a pending note. in that case, tsleep() would
raise error(Eintr); immidiately and would not sleep the
requested amount potentially cauing us to release active
dma memory too early! so we wrap the tsleep() call in a
while(waserror()) so we will at least wait the Abortdelay
amount if error is raised.
also, only try to idle the still active td's.
do not copy data in epio() when there was an error, theres
no reason to touch user buffer in that case.
for uhci, we also check that theres not more data in the
buffers than requested to avoid overflowing user buffer
in epio(). this should not happen but we'r paranoid.
for ehci, we also halt the queue head first in aborttds().
mark the queue heads as Qfree after unlinking and remove
some silly nil checks that are impossible.
on races... normal forks will all share the /env environment but
not the in memory variables of rc. so when we would normally fork
whoever does an exec (flush) first will override what the values of the
/env variables are, *independent* of the variables that where
actually modified *in* the process.
when we flush *before* fork, then at least both processes start out
with marked clean in memory variables and the processes will flush
only the things they actually change.
the "auth" ctl command only sets the rsne of the current selected
access point. so on deassociation, we wait for the connection to
the potentially new access point and then setup new rsne before
processing eapol messages.