the driver should work for standard sdhc
(see http://www.sdcard.org/) controllers,
but matches for the ricoh controller only
as it was the only one i have for testing.
if LocalX or ArgX is a package, the store into
a element should *not* type convert. so when taking
the index reference, we have to carry over the type.
empty href="" attribute in base-tag causes the page to break.
while at it, handle empty attributes in other parts of the
code as well. (mostly stuff like id, name shouldnt be empty)
it could happen that we unblanked while vesaproc was
currently blanking (when manually blanking using vgactl
for example). the wakeup of the unblank is lost.
disabled LAPIC entries overwrote the bootstrap processor
apic causing the machine panic with: "no bootstrap processor".
(problem with lenovo X230)
just ignore entries that are disabled or collide with
entries already found. (should not happen)
the issues with the previous tsc change where not related to the tsc
but where problems with timesync using an old frequency file. a
patch to fix timesync was commited, so so we reintroduce the *notsc=
again.
the frequency tolerance used by timesync was from a 10th to 10 times
the frequency of the system clock! switching a system from tsc to pic
timer changes the system clock frequency from 300MHz to arround 1.8Ghz
on a x200s laptop resulting in time running way too slow or way too fast.
so we change timesync to only accept frequencies from half to double the
system clock which still seems huge, but at least catches the case above
resulting in timesync ignoring the old frequency file.
aux/wpa needs to reset its reply counter on deassociation to
properly restart key negotiation. we signal this with a zero
length read on the connections filtering for eapol protocol.
allow the driver to associate the node with a new aid right after
we receive the association response, not just when we transmit
a packet which usualy does not happen as eapol is initiated by
the access point so there are no transmit calls. we just call
transmit from the wifiproc with a nil block to introduce the node.
the splhi() and apictimerlock in the Mach isnt neccesary, as
portclock always holds the ilock of the per mach timer queue
when calling timerset().
as fastticks() and the portclock timers are all handled on a
per processor basis, i think it should be theoretically possible
for the lapics to run at different frequencies. so we measure
the lapic frequency for each individual lapic and keep them in
a per processor Apictimer structure instead of assuming them
to be the same.
loading the divider before programming one shot mode *sometimes*
gives the wrong frequency. (X200s got 192Mhz vs. 266Mhz, after
5 boot attempts)
also reload the divider after programming periodic mode. (from
http://wiki.osdev.org/APIC_timer)
dnauthdb() would relabel expired rr's as rr->db == 0 to make
them get garbage collected by dnage(). but this doesnt work
due to dn->keep and also causes the deduplication to fail on
rrattach() as rrattach1() handles rr->dn/rr->auth as separate
name spaces.
this causes duplicate entries in the rr's when ndb gets
gets changed. to fix, we just delete the expired (removed from
ndb) rr's immidiately in dnauthdb() instead of trying trick
dnage() to garbage collect it.
doesnt seem to be reliable. also, separate tsc frequency measurement
and cpu loopconst measurement. turned out with *notsc=, the simplcycles()
calls would mess up loopconst.
we previously used tsc only on cpu kernel. now that
we use it on terminal kernel too, there might be some
surprises ahead.
so make it possible to disable tsc for machines where
the tsc rate is not kept constant across cores or is
dynamically adjusted by power management.
depending on the font, poping the menu would move your cursor
one pixel down each time (due to division). this is annoying
when using a trackpoint and trying to repeat some operation
over 9000 times.
the cursor should only be moved when the menu is repositioned
to contain it on the screen.
- same problem with wstat, if we error then owner has been already updated...
- avoid smalloc while holding qlock in wstat, do it before
- pikeshedd style...
- wstat would half update the Srv data structure if name was too long
- srvname() walked the linked srv list without holding srv qlock
- dont access sp->chan while not holding srv qlock in srvopen()
- dont modify sp->owner while not holding srv qlock in srvcreate()
- avoid smalloc() allocations while holding srv qlock
- style pikeshedding, sorry
resizewin() has some extra logic making sure the rect doesnt get too big.
rio would otherwise refuse to create the window and the operation will fail
completely.
on usb ethernet, it can happen that we read truncated packets smaller
than the ethernet header size. this produces a warning in pullupblock()
later like: "pullup negative length packet, called from 0xf0199e46"
we cannot assume theres only one instance of an acpi table. some
bios have multiple SSDT tables and we would only find the first
one.
now, we keep a second array to record the physical address of
the table visited by maptable(). load all instances to the
SSDT.
- fix bogus execution of Else{} blocks
- always allocate Env in amleval()
- add Sleep() and Stall() instructions
- keep package size for packages with empty body
from test(1):
f -older t True if file f is older than (modified before)
time t. If t is a integer followed by the letters
y(years), M(months), d(days), h(hours),
m(minutes), or s(seconds), it represents current
time minus the specified time. If there is no
letter, it represents seconds since epoch. You
can also concatenate mixed units. For example,
3d12h means three days and twelve hours ago.
this means *without* [y M d h m s] unit, t is *absolute* time
in seconds since epoch.
If 64-bit multiply has to save both AX and DX, it could load the wrong value
into DX; also, biggen shouldn't allocate either AX or DX as temporaries
when using the template for MUL.
doing poolcheck should give us better context to figure out
what memory blocks / owners corrupted the blocks after free.
this is for hunting down a memory corruption seen in connection
with usb serial.
this simplifies the arm ports and keeps all the stuff in one place
instead of spreading it thru notify(), trap() and syscall() functions
and prevents useless fp state copying for kernel procs.
also make sure to save fp in notify while still splhi().
the tag-word is not compatible between x87 and sse, have to convert
properly for emulation to work.
we now copy fp state across fork (again!) to preserve FCW and MXCSR
registers. this might not be neccesary as we could probably just
get the current value for the curren process and avoid the fpsave()
call, but become conservative again.
to fix this, make genwww return 0 if w->url is nil and output an error message when attempting to access selection if it's nil. the problem with the w->url fix is that after clicking on the url scroll bar, an empty url history row could be highlighted by clicking on it. fix this by making sure lp->lo is not less than zero.
when we fail to fork resources for the child due to resource
exhaustion, make the half forked child process call pexit()
to free the resources that where allocated and error out.
imagereclaim would happily uncache pages from the mountcache (port/cache.c)
without ever getting a Image* released from it. simple fix, just check for
p->image->notext but make sure todo it under the page lock :)
the compiler optimizes setting unused variables out, which is
problematic if they are used in waserror() handler which the
compiler isnt aware of. rearrange the code to avoid this problem.
catch potential interrupt error from kproc(). this can happen when
we run out of processes, then newproc() will call rsrcwait()
which does tsleep(). if the process gets a note, this might
raise a interrupt error.
get a bit more verbose about process image exhaustion and make
imagreclaim() try to get at least one image on the freelist.
use rsrcwait() to notify the state, and call freebroken() in
case imagereclaim() couldnt free any images.
the variables elem and file0 and commited are explicitely
set to avoid that they get freed in ther waserror() handlers.
but it turns out the compiler optimizes this out as he
thinks the variables arent used any further. (the compiler
is not aware of the waserror() / longjmp() semantics).
rearrange the code to account for this. instead of using
a local variable to check for point of no return (commited),
we use up->seg[SSEG] to figure it out.
for file0 and elem, we just rearrange the code. elem can be
checked in the error handler if it was already assigned to
up->text, and file0 is just free()'d after the poperror().
remove silly busy loop in sysrendez. it is not needed.
dequeueproc() will make sure that the process has come to
rest.
we now always use the new FXSAVE format in FPsave structure and fpregs
file, converting back and forth in fpx87save() and fpx87restore().
document that fprestore() is a destructive operation now.
change fp register definition in libmach and adapt fpr() acid funciton.
avoid unneccesary copy of fpstate and fpsave in sysfork(). functions
including syscalls do not preserve the fp registers and copying fpstate
from the current process would mean we had to fpsave(&up->fpsave); first.
simply not doing it, new process starts in FPinit state.
If you run this:
{for (i in `{seq 1 70000}) echo '½•α·'} | mc | wc
mc will eventually suicide. The error comes from
/sys/src/libdraw/font.c:/^agefont which assumes it has a
display. Normally, this is set up by geninitdraw (usually
via initdraw), but mc.c avoids that to avoid the screen
redraws (flicker, at a minimum, but worse in long-running
cases).
graphics(2) does not prohibit this use, so I made the least
intrusive change to make it work.
the fpenv() instruction stores in x87 format, using mathstate()
would interpret fpsave as FPssestate in case it was enabled!
instead, pass the status word and fppc explicitely to mathnote()
in matherror().
get rid of m->fpsavealign buffer, as we can just use FPssesave struct
which has enougth padding so rounding up base pointer will not overflow.
use resrcwait() when waiting for memory to become available. randomize
the sleep time and properly restore old process status in case tsleep()
gets interrupted.
filesystems do not handle i/o errors well (cwfs will abandon the blocks),
and temporary exhaustion of kernel memory (because of too many i/o's in
parallel) causes read and write on the partition to fail.
i think it is better to wait for the memory to become available in
this case. the single allocation is at max SDmaxio bytes, which makes
it likely to become available. if we havnt even enought fo that, then
rebooting the machine would be the best option. (aux/reboot)
the fist problem is that qopen() might return nil and that kstrdup() will
sleep, so we should try to avoid holding the mntalloc lock. so we move
the kstrdup() and qopen() calls before the Mnt allocation, and properly
recover the memory if we fail later.
the second problem was that we error(Eshort) after we already created the Mnt
when returnlen < sizeof(f.version). this check has to happen *before* we
even attempt to allocate the Mnt structures. note that we only copy the
version string once everything is in the clear, so the semantics of the
user buffer not being modified in case of error is not changed.
a little cleanup in muxclose(), getting rid of mntptfree()...
pread does not guarantee that it would read all the data asked for.
But acme usage of disk assumes that. This issues as many reads as
needed to make acme work when read returns less data than it wanted.
