Ori Bernstein
4ff82fe7a8
delete obsolete comments (replies are flagged elsewhere)
2019-12-05 00:16:15 -08:00
cinap_lenrek
f9f13bbd0e
merge
2019-12-04 22:04:12 +01:00
cinap_lenrek
f48f1a324a
bcm: use extended small pages so XN bit can work
...
the change to support no-execute bits broke the original
raspberry pi1, as it uses backwards compatible page table
format.
to use the XN bit, subpage AP bits have to be disabled
using the XP bit in CP15 Control Register c1 Bit 23.
2019-12-04 22:02:51 +01:00
cinap_lenrek
c9570c14af
9/boot/net.rc: suppress error from grep if ethernet ifstats file is not found
...
this can happen with nusb/ether, which does not implement ifstats file.
2019-12-04 21:56:13 +01:00
Ori Bernstein
7c55ca5fff
acme: Apply each -/+ only once ( #156 )
...
When plumbing an address like `3-`, Acme selects line 1,
and similarly `3+` selects line 5.
The same problem can be observed for character addresses (`#123+`)
but _not_ for ones like `+`, `.+` or `/foo/+`:
The problem only occurs when a number is followed by a direction (`-`/`+`).
Following along with the example `3-` through `address` (in addr.c):
We read `3` into `c` and match the `case` on line 239.
The `while` loop on line 242ff reads additional digits into `c`
and puts the first non-digit back by decrementing the index `q`.
Then we find the range for line 3 on line 251 and continue.
On the next iteration, we set `prevc` to the last `c`,
but since that part read ahead _into `c`_,
`c` is currently the _next_ character we will read, `-`,
and now `prevc` is too.
Then in the case block (line 210) the condition on line 211 holds
and Acme believes that it has read two `-` in sequence
and modifies the range to account for the “first” `-`.
The “second” `-` gets applied after the loop is done, on line 292.
So the general problem is:
While reading numbers, Acme reads the next character after the number into `c`.
It decrements the counter to ensure it will read it again on the next iteration,
but it still uses it to update `prevc`.
This change solves the problem by reading digits into `nc` instead.
This variable is used to similar effect in the block for directions (line 212)
and fills the role of “local `c` that we can safely use to read ahead” nicely.
(imported from plan9front a82a8b6368274d77d42f526e379b74e79c137e26)
2019-12-04 12:55:03 -08:00
Ori Bernstein
2b5db0d9d4
acme: avoid division by zero when resizing col ( #189 )
...
To reproduce, create a column with at least two windows and resize
acme to have almost zero height.
(imported from plan9port commit 76b9347a5fa3a0970527c6ee1b97ef1c714f636b)
2019-12-04 12:37:07 -08:00
Ori Bernstein
a181f3dd3e
acme, sam: handle >1GB files correctly
...
imported from plan9port, edfe3c016fe6ef10c55f7a17aab668214ec21efc
2019-12-04 11:46:42 -08:00
cinap_lenrek
f7db45e628
merge
2019-12-03 20:57:01 +01:00
cinap_lenrek
a23b88dc26
cmd(3): fix typo, Close -> Closed (thanks kivik)
2019-12-03 20:55:57 +01:00
Alex Musolino
a733f4caa3
rio(4): fix bad cross-reference format
2019-12-03 18:32:30 +10:30
Alex Musolino
aa9b6d3597
seconds(1): add SOURCE section
2019-12-03 18:25:24 +10:30
cinap_lenrek
1eca33b48c
always zero initialize Tm structure for tm2sec()
2019-12-03 08:22:02 +01:00
Ori Bernstein
e624b7ffb8
Remove reply print.
2019-12-02 14:50:53 -08:00
cinap_lenrek
8a0cefb237
merge
2019-12-02 23:33:29 +01:00
cinap_lenrek
5d59a44c21
pc, pc64: clear debug watchpoint registers on exec and exit
...
when a process does an exec syscall, procsetup() is called and
we have to disable the debug watchpoint registers. just clearing
p->dr is not enougth as we are not going thru a procsave() and
procrestore() cycle which would disable and reload the saved
debug registers.
instead of clearing debug registers in procfork(), we should
clear the saved debug registers before a process goes to die
(pexit() calls sched() with up->state = Moribund) as the Proc
structure can get reused for kernel processes (kproc) which
never call procfork() and would therefore have debug registers
loaded.
2019-12-02 23:32:24 +01:00
Ori Bernstein
6a3f1f1bca
remove debug print
2019-12-02 13:56:15 -08:00
Ori Bernstein
b2526c7d90
simplify flag parsing.
...
we've only got a few flags, a linear search is good enough,
and is obviously correct; the old search wasn't.
2019-12-02 13:53:57 -08:00
Sigrid
b62fda7bd1
os(1): fix a typo
2019-12-02 17:55:53 +02:00
cinap_lenrek
a815273960
merge
2019-12-02 08:27:49 +01:00
cinap_lenrek
d80826d6e5
vgai81x: remove unused mach0 variable
2019-12-02 08:26:34 +01:00
cinap_lenrek
a9be1374a0
pc: fix ldt memory leak in procsetup()
2019-12-02 07:43:45 +01:00
cinap_lenrek
70498378cf
kernel: add missing FPillegal definition for kw and omap kernels
2019-12-02 07:35:25 +01:00
Ori Bernstein
3681c836ca
fix typo: we don't have cache insurance.
2019-12-01 17:24:02 -08:00
Ori Bernstein
3889b249d4
show and update flags in acme mail
...
now, it's possible to tell whether you've read or replied
to a message.
2019-12-01 17:14:13 -08:00
Ori Bernstein
84c4c81cee
upas/fs imap fixes and improvements
...
do incremental imap fetches after startup, fixes validity handling,
record flags correctly when we aren't in the process of directly
updating a message, fixes off by one in flag parsing, fixes
mis-indexing messages in sync when we get an unsolicited fetch
response.
2019-12-01 17:12:19 -08:00
cinap_lenrek
08d6b0f043
kernel: improve diagnostics by reversing the roles of Proc.parentpid and Proc.parent
...
for better system diagnostics, we *ALWAYS* want to record the parent
pid of a user process, regardless of if the child will post a wait
record on exit or not.
for that, we reverse the roles of Proc.parent and Proc.parentpid so
Proc.parentpid will always be set on rfork() and the Proc.parent
pointer will point to the parent's Proc structure or is set to nil
when no wait record should be posted on exit (RFNOWAIT flag).
this means that we can get the pid of the original parent process
from /proc, regardless of the the child having rforked with the
RFNOWAIT flag. this improves the output of pstree(1) somewhat if
the parent is still alive. note that theres no guarantee that the
parent pid is still valid.
the conditions are unchanged:
a user process that will post wait record has:
up->kp == 0 && up->parent != nil && up->parent->pid == up->parentpid
the boot process is:
up->kp == 0 && up->parent == nil && up->parentpid == 0
and kproc's have:
up->kp != 0 && up->parent == nil && up->parentpid == 0
2019-12-01 17:57:14 +01:00
cinap_lenrek
21a599743e
pc, pc64: merge adjacent e820 map entries of same type
...
some machines give us over 300 e820 ram entries that are
all adjacent to each other causing us to run out of Map
end Emap entries.
this change adds e820clean() function, which sorts the
current e820 map and discards unusable entries and merges
adjacent entries. e820clean() is called after we parsed
the *e820= boot parameter or when we run out of entries.
an example of such a broken e820 map (thanks mischief):
*e820=1 0000000000000000 0000000000008000 1 0000000000008000 000000000000c000 1 000000000000c000 000000000003f000 1 000000000003f000 0000000000040000 1 0000000000040000 00000000000a0000 1 0000000000100000 0000000001000000 1 0000000001000000 0000000001020000 1 0000000001020000 0000000009d82000 2 0000000009d82000 000000000a000000 1 000000000a000000 000000000a200000 4 000000000a200000 000000000a20b000 1 000000000a20b000 000000000b000000 2 000000000b000000 000000000b020000 1 000000000b020000 0000000010000000 1 0000000010000000 000000001000b000 1 000000001000b000 00000000d9634000 1 00000000d9634000 00000000d96be000 1 00000000d96be000 00000000d96cc000 1 00000000d96cc000 00000000d96db000 1 00000000d96db000 00000000d97df000 1 00000000d97df000 00000000d97ed000 1 00000000d97ed000 00000000d9837000 1 00000000d9837000 00000000d9844000 1 00000000d9844000 00000000d985e000 1 00000000d985e000 00000000d9865000 1 00000000d9865000 00000000d9897000 1 00000000d9897000 00000000d98d7000 1 00000000d98d7000 00000000d98db000 1 00000000d98db000 00000000d98dd000 1 00000000d98dd000 00000000d999d000 1 00000000d999d000 00000000d9a8e000 1 00000000d9a8e000 00000000d9add000 1 00000000d9add000 00000000d9ae2000 1 00000000d9ae2000 00000000d9af3000 1 00000000d9af3000 00000000d9af4000 1 00000000d9af4000 00000000d9af6000 1 00000000d9af6000 00000000d9af7000 1 00000000d9af7000 00000000d9af8000 1 00000000d9af8000 00000000d9af9000 1 00000000d9af9000 00000000d9b5e000 1 00000000d9b5e000 00000000d9b60000 1 00000000d9b60000 00000000d9b8c000 1 00000000d9b8c000 00000000d9b8d000 1 00000000d9b8d000 00000000d9c85000 1 00000000d9c85000 00000000d9c8a000 1 00000000d9c8a000 00000000d9caf000 1 00000000d9caf000 00000000d9cb5000 1 00000000d9cb5000 00000000d9cc1000 1 00000000d9cc1000 00000000d9cc2000 1 00000000d9cc2000 00000000da986000 1 00000000da986000 00000000daeb6000 1 00000000daeb6000 00000000daed7000 1 00000000daed7000 00000000daed8000 1 00000000daed8000 00000000daf61000 1 00000000daf61000 00000000daf7c000 1 00000000daf7c000 00000000db3e6000 1 00000000db3e6000 00000000db4ea000 1 00000000db4ea000 00000000db57d000 1 00000000db57d000 00000000db587000 1 00000000db587000 00000000db58a000 1 00000000db58a000 00000000db58b000 1 00000000db58b000 00000000db591000 1 00000000db591000 00000000db5a7000 1 00000000db5a7000 00000000db5b2000 1 00000000db5b2000 00000000db5ba000 1 00000000db5ba000 00000000db5bb000 1 00000000db5bb000 00000000db5c6000 1 00000000db5c6000 00000000db5c7000 1 00000000db5c7000 00000000db5c8000 1 00000000db5c8000 00000000db5c9000 1 00000000db5c9000 00000000db5cb000 1 00000000db5cb000 00000000db5d0000 1 00000000db5d0000 00000000db5e8000 1 00000000db5e8000 00000000db5ea000 1 00000000db5ea000 00000000db5eb000 1 00000000db5eb000 00000000db5ee000 1 00000000db5ee000 00000000db601000 1 00000000db601000 00000000db602000 1 00000000db602000 00000000db60e000 1 00000000db60e000 00000000db610000 1 00000000db610000 00000000db612000 1 00000000db612000 00000000db614000 1 00000000db614000 00000000db61d000 1 00000000db61d000 00000000db645000 1 00000000db645000 00000000db64c000 1 00000000db64c000 00000000db650000 1 00000000db650000 00000000db651000 1 00000000db651000 00000000db653000 1 00000000db653000 00000000db658000 1 00000000db658000 00000000db659000 1 00000000db659000 00000000db661000 1 00000000db661000 00000000db662000 1 00000000db662000 00000000db665000 1 00000000db665000 00000000db677000 1 00000000db677000 00000000db69d000 1 00000000db69d000 00000000db6a0000 1 00000000db6a0000 00000000db6a8000 1 00000000db6a8000 00000000db6ae000 1 00000000db6ae000 00000000db6c2000 1 00000000db6c2000 00000000db6d4000 1 00000000db6d4000 00000000db6de000 1 00000000db6de000 00000000db6e0000 1 00000000db6e0000 00000000db6e2000 1 00000000db6e2000 00000000db6ef000 1 00000000db6ef000 00000000db6f0000 1 00000000db6f0000 00000000db6f2000 1 00000000db6f2000 00000000db6f3000 1 00000000db6f3000 00000000db810000 1 00000000db810000 00000000db815000 1 00000000db815000 00000000db81f000 1 00000000db81f000 00000000db821000 1 00000000db821000 00000000db85d000 1 00000000db85d000 00000000db869000 1 00000000db869000 00000000db881000 1 00000000db881000 00000000db889000 1 00000000db889000 00000000db88e000 1 00000000db88e000 00000000db88f000 1 00000000db88f000 00000000db891000 1 00000000db891000 00000000db899000 1 00000000db899000 00000000db8a9000 1 00000000db8a9000 00000000db8ab000 1 00000000db8ab000 00000000db8af000 1 00000000db8af000 00000000db8b1000 1 00000000db8b1000 00000000db8b5000 1 00000000db8b5000 00000000db8b7000 1 00000000db8b7000 00000000db8be000 1 00000000db8be000 00000000db8c2000 1 00000000db8c2000 00000000db8c7000 1 00000000db8c7000 00000000db8cf000 1 00000000db8cf000 00000000db8e0000 1 00000000db8e0000 00000000db8e1000 1 00000000db8e1000 00000000db8e2000 1 00000000db8e2000 00000000db8e6000 1 00000000db8e6000 00000000db8e8000 1 00000000db8e8000 00000000db8f4000 1 00000000db8f4000 00000000db904000 1 00000000db904000 00000000db90c000 1 00000000db90c000 00000000db91c000 1 00000000db91c000 00000000db91d000 1 00000000db91d000 00000000db922000 1 00000000db922000 00000000db923000 1 00000000db923000 00000000db929000 1 00000000db929000 00000000db92b000 1 00000000db92b000 00000000db92d000 1 00000000db92d000 00000000db92f000 1 00000000db92f000 00000000db933000 1 00000000db933000 00000000db934000 1 00000000db934000 00000000db936000 1 00000000db936000 00000000db937000 1 00000000db937000 00000000db952000 1 00000000db952000 00000000db96b000 1 00000000db96b000 00000000db998000 1 00000000db998000 00000000db9a1000 1 00000000db9a1000 00000000db9a2000 1 00000000db9a2000 00000000db9a3000 1 00000000db9a3000 00000000db9a4000 1 00000000db9a4000 00000000db9a5000 1 00000000db9a5000 00000000db9a7000 1 00000000db9a7000 00000000db9a8000 1 00000000db9a8000 00000000db9aa000 1 00000000db9aa000 00000000db9ba000 1 00000000db9ba000 00000000db9da000 1 00000000db9da000 00000000db9f7000 1 00000000db9f7000 00000000dba00000 1 00000000dba00000 00000000dba0a000 1 00000000dba0a000 00000000dba11000 1 00000000dba11000 00000000dba12000 1 00000000dba12000 00000000dba51000 1 00000000dba51000 00000000dba5d000 1 00000000dba5d000 00000000dba6c000 1 00000000dba6c000 00000000dba88000 1 00000000dba88000 00000000dba92000 1 00000000dba92000 00000000dba94000 1 00000000dba94000 00000000dbac0000 1 00000000dbac0000 00000000dbac6000 1 00000000dbac6000 00000000dbad2000 1 00000000dbad2000 00000000dbad9000 1 00000000dbad9000 00000000dbae0000 1 00000000dbae0000 00000000dbaeb000 1 00000000dbaeb000 00000000dbaf6000 1 00000000dbaf6000 00000000dbb01000 1 00000000dbb01000 00000000dbb17000 1 00000000dbb17000 00000000dbb1f000 1 00000000dbb1f000 00000000dbb20000 1 00000000dbb20000 00000000dbb23000 1 00000000dbb23000 00000000dbb24000 1 00000000dbb24000 00000000dbb25000 1 00000000dbb25000 00000000dbb3a000 1 00000000dbb3a000 00000000dbb3d000 1 00000000dbb3d000 00000000dbb43000 1 00000000dbb43000 00000000dbb45000 1 00000000dbb45000 00000000dbb49000 1 00000000dbb49000 00000000dbb4c000 1 00000000dbb4c000 00000000dbb4e000 1 00000000dbb4e000 00000000dbb51000 1 00000000dbb51000 00000000dbb54000 1 00000000dbb54000 00000000dbb5a000 1 00000000dbb5a000 00000000dbb5e000 1 00000000dbb5e000 00000000dbb62000 1 00000000dbb62000 00000000dbb67000 1 00000000dbb67000 00000000dbb91000 1 00000000dbb91000 00000000dbb93000 1 00000000dbb93000 00000000dbb94000 1 00000000dbb94000 00000000dbb9d000 1 00000000dbb9d000 00000000dbb9f000 1 00000000dbb9f000 00000000dbbcf000 1 00000000dbbcf000 00000000dbbd0000 1 00000000dbbd0000 00000000dbbd1000 1 00000000dbbd1000 00000000dbbd5000 1 00000000dbbd5000 00000000dbbd6000 1 00000000dbbd6000 00000000dbbd7000 1 00000000dbbd7000 00000000dbbd8000 1 00000000dbbd8000 00000000dbbd9000 1 00000000dbbd9000 00000000dbbdd000 1 00000000dbbdd000 00000000dbbdf000 1 00000000dbbdf000 00000000dbbe1000 1 00000000dbbe1000 00000000dbbeb000 1 00000000dbbeb000 00000000dbbec000 1 00000000dbbec000 00000000dbbef000 1 00000000dbbef000 00000000dbbff000 1 00000000dbbff000 00000000dbc01000 1 00000000dbc01000 00000000dbc05000 1 00000000dbc05000 00000000dbc0f000 1 00000000dbc0f000 00000000dbc11000 1 00000000dbc11000 00000000dbc12000 1 00000000dbc12000 00000000dbc14000 1 00000000dbc14000 00000000dbc15000 1 00000000dbc15000 00000000dbc20000 1 00000000dbc20000 00000000dbc21000 1 00000000dbc21000 00000000dbc22000 1 00000000dbc22000 00000000dbc2a000 1 00000000dbc2a000 00000000dbc2c000 1 00000000dbc2c000 00000000dbc2d000 1 00000000dbc2d000 00000000dbc2f000 1 00000000dbc2f000 00000000dbc30000 1 00000000dbc30000 00000000dbc42000 1 00000000dbc42000 00000000dbc44000 1 00000000dbc44000 00000000dbc54000 1 00000000dbc54000 00000000dbc5c000 1 00000000dbc5c000 00000000dbc5e000 1 00000000dbc5e000 00000000dbc60000 1 00000000dbc60000 00000000dbc64000 1 00000000dbc64000 00000000dbc6d000 1 00000000dbc6d000 00000000dbc7f000 1 00000000dbc7f000 00000000dbc85000 1 00000000dbc85000 00000000dbca3000 1 00000000dbca3000 00000000dbca6000 1 00000000dbca6000 00000000dbcb9000 1 00000000dbcb9000 00000000dbcba000 1 00000000dbcba000 00000000dbcbb000 1 00000000dbcbb000 00000000dbcbc000 1 00000000dbcbc000 00000000dbcbd000 1 00000000dbcbd000 00000000dbcd5000 1 00000000dbcd5000 00000000dbcd8000 1 00000000dbcd8000 00000000dbcd9000 1 00000000dbcd9000 00000000dbcda000 1 00000000dbcda000 00000000dbce1000 1 00000000dbce1000 00000000dbce3000 1 00000000dbce3000 00000000dbce4000 1 00000000dbce4000 00000000dbd06000 1 00000000dbd06000 00000000dbd07000 1 00000000dbd07000 00000000dbd0a000 1 00000000dbd0a000 00000000dbd0b000 1 00000000dbd0b000 00000000dbd0c000 1 00000000dbd0c000 00000000dbd0e000 1 00000000dbd0e000 00000000dbd10000 1 00000000dbd10000 00000000dbd12000 1 00000000dbd12000 00000000dbd15000 1 00000000dbd15000 00000000dbd17000 1 00000000dbd17000 00000000dbd19000 1 00000000dbd19000 00000000dbd1b000 1 00000000dbd1b000 00000000dbd44000 1 00000000dbd44000 00000000dbd46000 1 00000000dbd46000 00000000dbd60000 1 00000000dbd60000 00000000dbd70000 1 00000000dbd70000 00000000dbd79000 1 00000000dbd79000 00000000dbd7a000 1 00000000dbd7a000 00000000dbd7c000 1 00000000dbd7c000 00000000dbd7d000 1 00000000dbd7d000 00000000dbd90000 1 00000000dbd90000 00000000dbd93000 1 00000000dbd93000 00000000dbd97000 1 00000000dbd97000 00000000dbd9a000 1 00000000dbd9a000 00000000dbd9b000 1 00000000dbd9b000 00000000dbd9e000 1 00000000dbd9e000 00000000dbda1000 1 00000000dbda1000 00000000dbda5000 1 00000000dbda5000 00000000dbda9000 1 00000000dbda9000 00000000dbdaf000 1 00000000dbdaf000 00000000dbdb3000 1 00000000dbdb3000 00000000dbdb4000 1 00000000dbdb4000 00000000dbdbe000 1 00000000dbdbe000 00000000dbdbf000 1 00000000dbdbf000 00000000dbdc0000 1 00000000dbdc0000 00000000dbdc1000 1 00000000dbdc1000 00000000dbdc2000 1 00000000dbdc2000 00000000dbdc5000 1 00000000dbdc5000 00000000dbdc6000 1 00000000dbdc6000 00000000dbdc7000 1 00000000dbdc7000 00000000dbdcb000 1 00000000dbdcb000 00000000dbdcf000 1 00000000dbdcf000 00000000dbdd5000 1 00000000dbdd5000 00000000dbdd8000 1 00000000dbdd8000 00000000dbddf000 1 00000000dbddf000 00000000dbde1000 1 00000000dbde1000 00000000dbde5000 1 00000000dbde5000 00000000dbde8000 1 00000000dbde8000 00000000dbded000 1 00000000dbded000 00000000dbdf0000 1 00000000dbdf0000 00000000dbdf4000 1 00000000dbdf4000 00000000dbdf7000 1 00000000dbdf7000 00000000dbdfb000 1 00000000dbdfb000 00000000dbe1e000 1 00000000dbe1e000 00000000dbe20000 1 00000000dbe20000 00000000dbe23000 1 00000000dbe23000 00000000dbe27000 1 00000000dbe27000 00000000dbe28000 1 00000000dbe28000 00000000dbe2a000 1 00000000dbe2a000 00000000dbe2b000 1 00000000dbe2b000 00000000dc24d000 1 00000000dc24d000 00000000dc25c000 1 00000000dc25c000 00000000dc25d000 1 00000000dc25d000 00000000dc25e000 1 00000000dc25e000 00000000dc273000 1 00000000dc273000 00000000dc274000 1 00000000dc274000 00000000dc275000 1 00000000dc275000 00000000dc276000 1 00000000dc276000 00000000dc27a000 1 00000000dc27a000 00000000dc27e000 1 00000000dc27e000 00000000dc283000 1 00000000dc283000 00000000dc284000 1 00000000dc284000 00000000dc2a2000 1 00000000dc2a2000 00000000dc2a6000 1 00000000dc2a6000 00000000dd163000 2 00000000dd163000 00000000dd2a8000 1 00000000dd2a8000 00000000dd42a000 4 00000000dd42a000 00000000dd83e000 1 00000000dd83e000 00000000de38b000 1 00000000de38b000 00000000de430000 1 00000000de430000 00000000de733000 1 00000000de733000 00000000de74f000 1 00000000de74f000 00000000de770000 1 00000000de770000 00000000de77d000 1 00000000de77d000 00000000de783000 1 00000000de783000 00000000de78b000 1 00000000de78b000 00000000de7a4000 1 00000000de7a4000 00000000de7b4000 1 00000000de7b4000 00000000de7c9000 1 00000000de7c9000 00000000de7e0000 1 00000000de7e0000 00000000deff9000 1 00000000deff9000 00000000df000000 1 0000000100000000 000000021f380000 2 00000000000a0000 0000000000100000 2 00000000df000000 00000000e0000000 2 00000000f8000000 00000000fc000000 2 00000000fd000000 0000000100000000
2019-12-01 14:06:30 +01:00
cinap_lenrek
2359389570
os(1): add c implementation of inferno os command and cmd(3) device manpages
...
this is a reimplementation of infernos os(1) command, which
allows running commands in the underhying host operating
system when inferno runs in hosted mode (emu). but unlike
inferno, we want to use it to run commands on the client
side of a inferno or drawterm session from the plan9 cpu
server, so it defaults to /mnt/term/cmd for the mountpoint.
2019-11-30 20:10:08 +01:00
cinap_lenrek
d32e5d130c
sd53c8xx: fix the driver for amd64, fix alignment/padding issues, fix freechain handling
2019-11-24 21:56:54 +01:00
cinap_lenrek
87c8fa5415
upas/fs: remove useless loop in rf822()
2019-11-24 03:46:53 +01:00
Ori Bernstein
6c2017f6a6
fix ref822 again: remove uniqarray(), fix case with many entries in 'n'.
2019-11-23 08:23:21 -08:00
Alex Musolino
cac853084c
upas/marshal: fix printinreplyto function
...
According to RFC822, the message identifier (msg-id) in a
"In-Reply-To" header must start with a '<' and end with a '>'.
2019-11-22 17:29:35 +10:30
Ori Bernstein
543c35deba
fix ref882 reference parsing.
...
we were getting nils in the list when there were many references.
this fixes and simplifies the copying loop and makes the code rhyme.
2019-11-21 17:17:54 -08:00
Ori Bernstein
4cef9b12fd
show urls in html messages.
...
sometimes, I get phishing emails with links that I have an unstoppable
urge to click.
2019-11-21 10:48:13 -08:00
BurnZeZ
29b6ad3330
grep: error if sbrk fails
2019-11-21 16:44:41 +00:00
Ori Bernstein
5510488879
merge
2019-11-20 16:12:21 -08:00
Ori Bernstein
0ff4099a60
improve language in delay(9)
...
give the reader enough context to know when to use and not
use the delay family of functions.
2019-11-20 16:05:52 -08:00
cinap_lenrek
07e3d1c254
merge
2019-11-21 00:40:15 +01:00
cinap_lenrek
8e20bc7515
vac(1): assimilate manpage additions from plan9port and complete usage lines (thanks joe9)
...
the usage lines in vac where out of sync with the implementation
and the manpages.
document the -a and -x options, from:
https://github.com/9fans/plan9port/blob/master/man/man1/vac.1
2019-11-21 00:39:07 +01:00
Alex Musolino
48a804e3fd
mail(1): fix typo
2019-11-20 17:46:29 +10:30
Alex Musolino
088ec01b1e
timezones: change DST timezone string for South Australia
...
Use "CDT" for DST as distinct from "CST" for non-DST.
2019-11-20 11:49:16 +10:30
Ori Bernstein
eca7cac908
merge
2019-11-19 12:31:42 -08:00
Ori Bernstein
0b6f0c70db
add start of section 9 manpages (thanks rgl)
...
this change adds some of the kernel manpages from 9legacy,
fixed and updated to match the changes in 9front.
2019-11-19 12:30:40 -08:00
cinap_lenrek
2c9e3861a5
rio: fix cons read breakage from previous commit
2019-11-19 09:03:45 +01:00
Alex Musolino
37d6ddd8f3
rio(4): update description of wctl file format
...
State strings are now padded to 12-characters. Remove ambiguous
reference to "12-character style", instead referring the reader to
image(6).
2019-11-19 12:43:53 +10:30
Alex Musolino
59115ba407
rio: pad window status strings in wctl files
...
This makes it possible to read the entire initial contents of the wctl
files without blocking.
2019-11-19 12:40:53 +10:30
Alex Musolino
4d4107b385
rio: fix bug causing short reads of wctl files
...
Previously, reads of wctl files would return one byte less than
requested as the returned string must be null terminated. Now we pass
the actual size of the allocated buffer to the handler, which is large
enough to accommodate a trailing partial rune and terminating null
byte.
2019-11-19 12:38:13 +10:30
Ori Bernstein
f32148b290
document 'T' flag misbehavior (thanks rgl)
2019-11-18 01:06:02 -08:00
Ori Bernstein
b2e29cf315
Specifiy the restrictions on 9boot file names more clearly.
2019-11-17 16:17:15 -08:00
Ori Bernstein
3e1a75d08f
Document 9bootfat limitation.
2019-11-17 16:08:48 -08:00