When a match() fails, we need to unget the character we
tried to match against, rather than leaving it consumed.
Also, we can't break out of a conversion before we reach
the end of a format string, because things like the '%n'
conversion do not consume anything, and should still be
handled.
As said in the code comment:
Elecom trackball report descriptor lies by
omission, failing to mention all its buttons.
We patch the descriptor with a correct count
which lets us parse full reports. Tested with:
Elecom HUGE (M-HT1DRBK, M-HT1URBK)
The descriptor fixup is adapted from Linux kernel:
drivers/hid/hid-elecom.c
in which a more detailed account of why and how this
works may be found.
A followup change to nusb/kb will be needed to expose
these additional events for potential remapping.
spectacular bug. cmpswap() had a sign extension bug
using sign extending MOV to load the old compare
value and LDXRW using zero extension while the CMP
instruction compared 64 bit registers.
this caused cmpswap with negative old value always
to fail.
interestingly, libc's version of this function was
fine.
C99 requires that if intXX_t types are defined, int_fastxx_t and
int_leastxx_t types are defined as well. We define all three to
be identical (intXX_t == int_fastXX_t == int_leastXX_t).
This makes the flagfmt parser more robust and accepting
a looser input language — namely by allowing whitespace
around specifier fields and ignoring any empty fields.
Long flagfmts can thus be pleasingly displayed:
flagfmt='
a, b, c, C:cache,
m:mtpt mountpoint,
s:srvn srvname'
The mount() and bind() syscalls return -1 on error,
and the mountid sequence number on success.
The manpage states that the mountid sequence number
is a positive integer, but the kernels implementation
currently uses a unsigned 32-bit integer and does not
guarantee that the mountid will not become negative.
Most code just cares about the error, so test for
the -1 error value only.
mischief provided the following test that shows the issue:
ramfs -S crash
aux/9pcon /srv/crash <<EOF
Tversion 8192 9P2000
Tattach 0 -1 $user ''
Tcreate 0 dir 020000000777 0
Tattach 5 -1 $user ''
Twalk 5 6 dir
Tread 6 0 512
EOF
the problem is that lib9p wrongly allowed reads on closed fids,
due to the permission check only considering the lower 2 bits.
a closed fid has fid->omode == -1 and it would pass on read for:
(-1 & 3) == 3 == OEXEC
the following change explicitely checks for for the closed case
and also rejects writes on directories (they are rejected on
open/create, but a broken 9p client could still issue the request).
when reclaiming pages from an image, always reclaim all
the hash chains equally. that way, we avoid being biased
towards the chains at the start of the Image.pghash[] array.
images can be in two states: active or inactive. inactive
images are the ones which are not used by program while
active ones aare.
when reclaiming pages, we should try to reclaim pages
from inactive images first and only if that set becomes
exhausted attempt to release text pages and attempt to
reclaim pages from active images.
when we run out of Image structures, it makes only sense
to reclaim pages from inactive images, as reclaiming pages
from active ones will never free any Image structures.
change putimage() to require a image already locked and
make it unlock the image. this avoids many pointless
unlock()/lock() sequences as all callers of putimage()
already had the image locked.
- nil check pl_blue allocation, and don't do it every time pl_rtdraw is called
- fix re-adding previously removed flushimage calls
- correct format for pointer
- sysfatal in pl_drawinit on error
if we do 'CAT(foo bar, baz quux)', the resulting token row
should have 3 tokens: 'foo', 'barbaz', 'quux'.
tested by jonasa, rebuilding /sys/src, perl, netsurf, and nuklear.
Modify aux/kbdfs to work with neo2 layout.
- add new modifier, increase limit on layers.
- Add Kaltgr for mod3
- Add mod4
This change only implements the alphanumeric
block of the keyboard in the kbmap, as neo2
is mainly used for blind typing and is not
needed that much anywhere else, this leaves
the numpad like it is.
(Thanks, jstsmthrgk@jstsmthrgk.eu)
grow selection from point of click, not start of selection region.
starting at the beginning of the selection region causes the match
logic to kick in, which is confusing.
the caller of macexpand() needs one more byte in
the buffer to append peekc.
make macexpand() actually check for buffer overflow.
just use strdup() to duplicate include file name
instead of the hunk dance.
move GETC() macro in cc.h
looks like linux changed the device tree names for
the memory node:
4b17654f51 (diff-ac03c9402b807c11d42edc9e8d03dfc7)
this fixes the memory size detection with latest firmware
on raspberry pi4-b (4GB) for kenji.
with scroll-wheel scrolling, this case can happen with the
command window:
umbraticus → cinap: create fullscreen file buffer by right-clicking in cmd window
slookup() copies to symb, so use the symb[NSYMB] buffer directly
to declare type conversion functions and get rid of the arbitrary
sized local buffer. replace sprint() with snprint().
We used to treat all operators as right associative,
which means that we would evaluate them incorrecty.
For example, '2 - 1 + 1' would evaluate as '2 - (1 + 2)',
instead of '(2 - 1) + 1'.
This adds an assoc parameter to struct pri, and then uses
it to decide how to evaluate operators.
when pushing expressions in cpp, particularly complex ones could
overflow the stack and silently corrupt our data structures. add
checks when we push, and bump the stack size up.
for floating point operations, reuse the return register
on the right hand side if it has higher complex number
than the left hand side to conserve registers.
this makes the following code compile, that was previously
run out of floating point register:
float
f(float r[15])
{
return (r[0] + (r[1] * (r[2] + r[3] * (r[4] + r[5] * (r[6] + r[7] * (r[8] + r[9] * (r[10] + r[11] * (r[12] + r[13] * r[14]))))))));
}
the downside is that this produces extra move operations.
BurnZeZ reported this the other day. It seems like if we have
a pipeline that looks like:
fn foo{cat < <{echo hi}}
then the '<' will get merged in /env/'fn#foo'. This change
fixes pcmd to add a space. It looks to me like this is the
only token that can get merged this way by pcmd.
The previous patch to plumb non-whitespace segments was
confusing due to lack of visual feedback. This removes
the empty selecton plumb behavior, and instead makes
triple clicking work to get a plumbable selection.
when running ndb configuration, we might inherit the ipgw=
attribute from the ipnet pointing to our own ip address
(we are the default gateway). ignore such entries.
do not add default routes with gateway equal to our own
local (ip4) or link-local ip address (ipv6).
mysbrk() was only used in gethunk() and should not be
called by anyone, so dont export the symbol.
simplify gethunk() using brk().
double allocation size on each call until we reach
1000*NHUNK.
use signed long for nhunk as alignment rountin might
make it negative and handle that case.
for gethunk() to work, all allocators have to use it,
including allocations done by libc thru malloc(),
so the fake allocation functions are mandatory for
everyone.
to avoid duplication the code is moved to cc/compat
and prototypes provided in new cc/compat.h header.
the assemblers share gethunk() cc/macbody but are compiled
without compat.c, so calls such as getenv() trigger malloc()
which does its own sbrk() calls, breaking the continuity
of the hunk.
so this change needs another revision. until then, this is
backed out.
the compilers and linkers use ther own memory allocator.
free memory is between hunk and hunk+nhunk. allocation
works by checking if nhunk is bigger or equal to the
amount needed, and if not, repeatedly call gethunk()
until there is. after that, the allocated amount is added
from hunk and subtracted from nhunk by the user.
the problem was when the needed amount was bigger than
the default NHUNK size gethunk() allocates per call.
gethunk() would not actually grow nhunk, but instead
just set hunk and nhunk variables to the last allocated
block. this resulted in a infinite loop of calls to
gethunk() until sbrk() would hit the maximum size for
the BSS segment.
this change makes gethunk() actually grow the hunk space,
increasing nhunk, and only updating hunk when nhunk was
previously zero. we assume that mysbrk() retuns increasing
addresses and that the space between the previous hunk+nhunk
and the new block base returned by mysbrk() is usable.
the real problem is that gethunk() does not grow the allocation
but just allocates a new hunk, so repeated calls to gethunk()
wont make nhunk grow to satisfy the allocation.
this will be fixed in a upcoming commit.
The swcursor used a 32x32 image for saving/restoring
screen contents for no reason.
Add a doflush argument to swcursorhide(), so that
disabling software cursor with a double buffered
softscreen is properly hidden. The doflush parameter
should be set to 0 in all other cases as swcursordraw()
will flushes both (current and previours) locations.
Make sure swcursorinit() and swcursorhide() clear the
visibility flag, even when gscreen is nil.
Remove the cursor locking and just do everything within
the drawlock. All cursor functions such as curson(),
cursoff() and setcursor() will be called drawlock
locked. This also means &cursor can be read.
Fix devmouse cursor reads and writes. We now have the
global cursor variable that is only modified under
the drawlock. So copy under drawlock.
Move the pc software cursor implementation into vgasoft
driver, so screen.c does not need to handle it as
a special case.
Remove unused functions such as drawhasclients().
most pc's are multiprocessors these days, that use apic or
msi interrupts, then the irq does not matter anymore. and
uefi does not even assign irq to pci devices anymore. if
we have a problem enabling an interrupt, we will print.
Some UEFI implementations use random UUID based DUID instead of
ethernet address, but use ethernet derived link-local addresses.
So extract the MAC from our IPv6 address.
memory returned by rampage() is not zeroed, so we have to
zero it ourselfs. apparently, this bug didnt show up as we
where zeroing conventional low memory before the new memory
map code. also rampage() never returns nil.
error handling in portreset() was wrong. we called closedev()
on the device without changing the reference.
just call portdetach() when the reset fails.
