This patch adds dirmodefmt from fcall.h to pretty-print file
permissions, similarly to ls -l. I didn't notice any performance
degradation.
I hope no-one relied on the old behaviour.
i have found one bug. when i put glenda in a position like this
i somehow win, but the glenda can escape from there.
in addition, i have changed the games manpage to include more info about glendy.
We can take advantage of the fact that xinit() allocates
kernel memory from conf.mem[] banks always at the beginning
of a bank, so the separate palloc.mem[] array can be eleminated
as we can calculate the amount of non-kernel memory like:
upages = cm->npage - (PGROUND(cm->klimit - cm->kbase)/BY2PG)
for the number of reserved kernel pages,
we provide the new function: ulong nkpages(Confmem*)
This eleminates the error case of running out of slots in
the array and avoids wasting memory in ports that have simple
memory configurations (compared to pc/pc64).
To reproduce the suicide try running the following in acme:
• 'Edit B <ls lib'
by select and middle clicking in a window that is in your $home.
There is a very high chance acme will commit suicide like this:
<snip>
cpu% broke
echo kill>/proc/333310/ctl # acme
cpu% acid 333310
/proc/333310/text:amd64 plan 9 executable
/sys/lib/acid/port
/sys/lib/acid/amd64
acid: lstk()
edittext(nr=0x31,q=0x0,r=0x45aa10)+0x8 /sys/src/cmd/acme/ecmd.c:135
xfidwrite(x=0x461230)+0x28a /sys/src/cmd/acme/xfid.c:479
w=0x0
qid=0x5
fc=0x461390
t=0x1
nr=0x100000031
r=0x45aa10
eval=0x3100000000
a=0x405621
nb=0x500000001
err=0x419310
q0=0x100000000
tq0=0x80
tq1=0x8000000000
buf=0x41e8d800000000
xfidctl(arg=0x461230)+0x35 /sys/src/cmd/acme/xfid.c:52
x=0x461230
launcheramd64(arg=0x461230,f=0x22357e)+0x10 /sys/src/libthread/amd64.c:11
0xfefefefefefefefe ?file?:0
</snap>
The suicide issue is caused by the following chain of events:
• /sys/src/cmd/acme/ecmd.c:/^edittext is called at
/sys/src/cmd/acme/xfid.c:479 passing nil as its first parameter:
<snip>
...
case QWeditout:
r = fullrunewrite(x, &nr);
if(w)
err = edittext(w, w->wrselrange.q1, r, nr);
else
err = edittext(nil, 0, r, nr);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...
</snap>
...and /sys/src/cmd/acme/ecmd.c:/^edittext dereferences the
first parameter that is *nil* at the first statement:
<snip>
char*
edittext(Window *w, int q, Rune *r, int nr)
{
File *f;
f = w->body.file;
^^^^^^^^^^^^^^^^^^^^^
This will crash if 'w' is *nil*
switch(editing){
...
</snap>
Moving the the derefernce of 'w' into the case where it is
needed (see above patch) fixes the suicude.
The memory leak is fixed in /sys/src/cmd/acme/ecmd.c:/^filelist. The
current implementation of filelist(...) breaks its contract with its
caller, thereby leading to a memory leak in /sys/src/cmd/acme/ecmd.c:/^B_cmd
and /sys/src/cmd/acme/ecmd.c:/^D_cmd.
The contract /sys/src/cmd/acme/ecmd.c:/^filelist seems to have with
its callers is that in case of success it fills up a 'collection' that
callers can then clear with a call to clearcollection(...).
The fix above honours this contract and thereby removes the leak.
After you apply the patch the following two tests should succeed:
• Execute by select and middle click in a Tag:
'Edit B lib/profile'
• Execute by select and middle click in a Tag:
'Edit B <ls lib'
The former lead to a resource leak that is now fixed.
The latter lead to a suicide that is now fixed by moving the statement
that dereferences the parameter to the location where it is needed,
which is not the path used in the case of 'Edit B <ls'.
Cheers,
Igor
The confstr was shared between readers so seprintconf() could
write concurrently to that buffer which is not safe.
This replaces the shared static confstr[Maxconf] buffer with a
pointer that is initially nil and a buffer that is alloced on
demand.
The new confstr pointer (and buffer) is now only updated while
wlock()ed from the new setconfstr() function.
This is now done by mconfig() / mdelctl() just before releasing
the wlock.
Now, rdconf() will check if confstr has been initialized, and
test for it again while wlock()ed; making sure the configuration
is read only once.
Also, rdconf() used to check for a undocumented "fsdev:\n" string
at the beginning of config data tho that was never documented.
This changes mconfig() to ignore that particular signature so
the example from the manpage will work as documented.
The sunStringUnpack() routine was miscompiled by 7c, as
pointer arithmetic is done in 64 bit but the constant -1
offset got expended to a unsigned 32 bit integer.
The Plan 9 foundation has ownership of the Plan 9 code now,
and has made it accessible under the MIT license, so we're
taking that version of the code as our base now.
The expression value of the assignment operation was
returned implicitely by relying on regalloc() on the
right hand side "nod" borrowing the register from nn.
But this only works if nn is a register.
In case of 6c, it can also be a ONAME from a .safe
rathole returned by regsalloc().
This change adds explicit gmove() calls to assign the
expression value. Note that gmove() checks if source
and destination are the same register so it wont emit
redundant move operations in the common case.
The same is applied also to OPREINC and OPOSTINC operations.
Mutating lists that are being iterated is needlessly error
prone, and we were removing the wrong message in some cases
if it the dummy got inserted in the right place.
Separating deletion into a redraw/relink and zap phase
simplifies the problem.
Switching window focus used to be non deterministic
as the current window in focus (Window *input) was set
concurrently while processing window messages such as
Resized and Topped.
This implements a new approach where wcurrent() and
wuncurrent() are responsible for the synchronization
and switch of the input.
It is implemented by sending a Repaint message to the
old input window first, neccesarily waiting until that
window releases the focus and then input is updated
and then a Topped or Reshaped message is send to the
new input window.
Note, that when the whole screen is resized that no
input changes need to happening anymore.
This change makes the text window be focused on startup when using
default riostart (e.g: when using the release ISO). This little change
makes you able to immediately reach the rc shell without clicking the
window, which at the very least is more convenient, and if you have
problems to use your mouse but want to install the system, you also
can (I had to stop profile from running at boot to patch it in my VPS
KVM console because the mouse wasn't working properly. Could install
and setup it to connect through drawterm).
let pci.c deal with the special cardbus controller bar0 and
expansion roms.
handle apic interrupt routing for devices behind a cardbus slot.
do not free the pcidev on card removal, as the drivers
most certanly are not prepared to handle this yet.
instead, we provide a pcidevfree() function that just unlinks
the device from pcilist and the parent bridge.
When deleting messages that came in just
the right order, we would end up stuck in
a loop deleting and reinserting a dummy
parent, rather than the messages we wanted
to remove.
p.kosyh writes:
Hello! I finally bought rpi4 4Gb specially for 9front. It seems,
that default bpp of framebuffer is 16. I changed it to 24 (via
cmdline.txt and config.txt) and found, that rendering is much faster!
(May be due removing overheads in 16->24 conversions?)
But on rpi4 r and b channels are swapped. So, i changed BGR24 to
RGB24 in bcm/screen.c and now it works fine!
Sacrifice some of the sub-millisecond timer precision in favor of less
cpu load when the timer is about to be kicked a bit early. Result is
visible *especially* when the guest idling.
Timer proc *still* has to send to the channel (in order to kick PIT
and RTC logic), which takes time, and compensates a bit for possibly
early runs.
tftpd currently unconditionally sets its namespace via /lib/namespace
(newns("none", nil)), which stymied my attempts to pxe boot the
openbsd installer without creating a real /etc dir on 9front, which
would've been gross.
I tried working around this with -h (and -r for good measure), but
again hit issues because the namespace is rebuilt from scratch -- any
binds of /386, /amd64, /cfg/pxe, etc. into the tftp-specific directory
disappeared from tftpd's namespace and rendered my *9front* boxes
unable to boot. I could maintain copies of the needed files in the
tftp-specific directory, but that'd be kind of a drag.
The following patch adds a -n flag to allow the specification of a
namespace file in place of /lib/namespace; similar to ip/ftpd.
I thought about setting up a /lib/namespace.tftp to act as a default
rather than continuing to use /lib/namespace by default (which
security-wise is about the same as allowing 9p mounts by user none,
which I also have disabled), but I had trouble coming up with a sane
default. Maybe someone more experienced would like to try that out.
- sam-d
IndexField is supposed to increment the index value when an
access is done with a bigger size than the data field.
The index value is always a byte offset.
Now that we always calculate the offset for each field unit
access for IndexField, rename the indexv to bank (the bank
value), as it is only used for that. Also, do not compare
it with nil, as it is a integer constant which can be
encoded as nil to mean zero.
For BankField, the banking field was written using store(),
which does nothing when the destination is a Field*.
Use rwfield() to fix it in the new rwfieldunit().
Resolve all the Name*'s when IndexField, BankField and
Field are created. Now, Field.reg points to eigther
Buffer object, Region or Field (data Field of an IndexField).
PS: initial bug report by Michael Forney follows below:
In /dev/kmesg on my T14, I saw a message
amlmapio: [0xffffff18-0x100000018] overlaps usable memory
amlmapio: mapping \_SB.FRTP failed
Here is the relevant snippet from my DSDT:
Scope (_SB)
{
...
OperationRegion (ECMC, SystemIO, 0x72, 0x02)
Field (ECMC, AnyAcc, NoLock, Preserve)
{
ECMI, 8,
ECMD, 8
}
IndexField (ECMI, ECMD, ByteAcc, NoLock, Preserve)
{
Offset (0x08),
FRTB, 32
}
OperationRegion (FRTP, SystemMemory, FRTB, 0x0100)
Field (FRTP, AnyAcc, NoLock, Preserve)
{
...
}
}
With some debugging output:
amlmapio(\_SB.ECMC): Io 72 - 74
rwreg(\_SB.ECMC): Io [72+0]/1 <- 8
rwreg(\_SB.ECMC): Io [72+1]/1 -> 18
amlmapio(\_SB.FRTP): Mem ffffff18 - 100000018
amlmapio: [0xffffff18-0x100000018) overlaps usable memory
amlmapio: mapping \_SB.FRTP failed
It seems that libaml does not handle IndexField correctly and just did
a single read from ECMD after setting ECMI to 8, causing the FRTP
region to be evaluated as 0xffffff18-0x100000018. Instead, it should
be reading 4 bytes [18 c0 22 cc], evaluating it as
0xcc22c018-0xcc22118:
amlmapio(\_SB.ECMC): Io 72 - 74
rwreg(\_SB.ECMC): Io [72+0]/1 <- 8
rwreg(\_SB.ECMC): Io [72+1]/1 -> 18
rwreg(\_SB.ECMC): Io [72+0]/1 <- 9
rwreg(\_SB.ECMC): Io [72+1]/1 -> c0
rwreg(\_SB.ECMC): Io [72+0]/1 <- a
rwreg(\_SB.ECMC): Io [72+1]/1 -> 22
rwreg(\_SB.ECMC): Io [72+0]/1 <- b
rwreg(\_SB.ECMC): Io [72+1]/1 -> cc
amlmapio(\_SB.FRTP): Mem cc22c018 - cc22c118
I wrote a patch (attached) to fix this, and it seems to work. Though,
it's not clear to me when things should be dereferenced. Previously,
the data field was dereferenced at evalfield, but the region and index
field were not until rwfield. After the patch, the index field is
also dereferenced in evalfield.
For BankField, the index *is* dereferenced in evalfield. I'm pretty
sure that this means that BankField does not work currently, since
store() just returns nil for 'f' objects. The bank selector will
never get set.
Anyway, I don't know if this solves any real problems; it's just
something I noticed and thought I'd try to fix.
When the save folder did not exist, and we could not create
it, we would handle up to one Biobuf worth of message, and
then fail, due to a failed tee. The sequence of events leading
up to this was:
openfolder() -> error
tee(0, fd, -1) -> wait for read
write(0, data) ->
write(fd, data) -> ok
write(-1, data) -> error, tee terminates
write(0, attachment) -> error
This change prevents us from writing to a closed fd, and
therefore from erroring out when sending.
We also warn the user.
---
To: 9front@9front.org
Date: Sun, 07 Feb 2021 14:56:39 +0100
From: kvik@a-b.xyz
Subject: Re: [9front] transient dns errors cause smtp failure
Reply-To: 9front@9front.org
I think I found a reason for DNS failing on known good domains.
/sys/src/cmd/ndb/dns.h:156,157
/* tune; was 60*1000; keep it short */
Maxreqtm= 8*1000, /* max. ms to process a request */
So, 8 seconds is how much the resolver will bother with a request it
has been handed, before dropping it on the floor with little
explanation.
It seems quite possible that this is too short a timeout on a machine
during a spam queue run, which predictably stresses the compute and
network resources.
In turn, negative response caching might explain why a particular
unlucky domain would basically stop receiveing any mail for a while.
I'm dying to know if bumping this limit would clear up the queue of
such DNS errors.
---
[narrator: it did.]