The swcursor used a 32x32 image for saving/restoring
screen contents for no reason.
Add a doflush argument to swcursorhide(), so that
disabling software cursor with a double buffered
softscreen is properly hidden. The doflush parameter
should be set to 0 in all other cases as swcursordraw()
will flushes both (current and previours) locations.
Make sure swcursorinit() and swcursorhide() clear the
visibility flag, even when gscreen is nil.
Remove the cursor locking and just do everything within
the drawlock. All cursor functions such as curson(),
cursoff() and setcursor() will be called drawlock
locked. This also means &cursor can be read.
Fix devmouse cursor reads and writes. We now have the
global cursor variable that is only modified under
the drawlock. So copy under drawlock.
Move the pc software cursor implementation into vgasoft
driver, so screen.c does not need to handle it as
a special case.
Remove unused functions such as drawhasclients().
most pc's are multiprocessors these days, that use apic or
msi interrupts, then the irq does not matter anymore. and
uefi does not even assign irq to pci devices anymore. if
we have a problem enabling an interrupt, we will print.
Some UEFI implementations use random UUID based DUID instead of
ethernet address, but use ethernet derived link-local addresses.
So extract the MAC from our IPv6 address.
memory returned by rampage() is not zeroed, so we have to
zero it ourselfs. apparently, this bug didnt show up as we
where zeroing conventional low memory before the new memory
map code. also rampage() never returns nil.
error handling in portreset() was wrong. we called closedev()
on the device without changing the reference.
just call portdetach() when the reset fails.
This replaces the memory map code for both pc and pc64
kernels with a unified implementation using the new
portable memory map code.
The main motivation is to be robust against broken
e820 memory maps by the bios and delay the Conf.mem[]
allocation after archinit(), so mp and acpi tables
can be reserved and excluded from user memory.
There are a few changes:
new memreserve() function has been added for archinit()
to reserve bios and acpi tables.
upareserve() has been replaced by upaalloc(), which now
has an address argument.
umbrwmalloc() and umbmalloc() have been replaced by
umballoc().
both upaalloc() and umballoc() return physical addresses
or -1 on error. the physical address -1 is now used as
a sentinel value instead of 0 when dealing with physical
addresses.
archmp and archacpi now always use vmap() to access
the bios tables and reserve the ranges. more overflow
checks have been added.
ramscan() has been rewritten using vmap().
to handle the population of kernel memory, pc and pc64
now have pmap() and punmap() functions to do permanent
mappings.
This is a generic memory map for physical addresses. Entries
can be added with memmapadd() giving a range and a type.
Ranges can be allocated and freed from the map. The code
automatically resolves overlapping ranges by type priority.
Fix the inconsistent use of ether->mem. Always use physical
addresses. Let ether8390 convert to virtual addresses using
KADDR() when we have to copy data in/out.
in ndb, we use the ethernet mac to identify the client.
in dhcpv6, there is just a uniqueue device id that
might even be generated randomly. to find the ethernet
address of a client, check the duid type and only use
it when the dudid is of type 1 (link layer) or 3 (link
layer address + time) and the link layer address type
is 1 (ethernet). otherwise, assume the source ip is
a link local address and extract it from that.
this hack works for thinkpad t495, which uses random
uuid based client duid.
the previous mkfile had a sneaky hack that would use
sed to delete the first 2 lines of hex output to strip
the 32 byte long a.out header for apbootstrap and rebootcode.
use 8l -H3 flag to strip the header from the output file.
Output buffering is automatically disabled when reading from stdin.
In this case, supplying the -b flag ought to be redundant. However,
since Bflag was being XORed into the flag set - rather than simply
ORed - supplying -b would actually enable output buffering.
while technically a 32 bit ptrdiff_t is in spec on
systems with 64 bit ponters as long as we guarantee
that individual objects are small enough, this can
confuse legitimate code, so lets fix this.
This fixes token pasting, making it expand when
it should expand, and paste before expansion when
it should paste before expanding.
#define CAT(a, b) a ## b
#define BAR 3
#define FOO CAT(BAR, 3)
FOO
now produces 33, while
#define CAT(a, b) a ## b
#define EOF (-1)
#define NOP(x) x
NOP(CAT(foo, EOF))
CAT(,EOF)
CAT(,)
produces
fooEOF
(-1)
<empty>
respectively.
ccom may be called multiple times on the same
node, via 'goto loop' calls from the commute
label, OADD, and a few other places.
Casts to void could null out the LHS of the
node, which would cause the compiler to crash
if the cast was revisited due to one of these
cases, because we tried frobbing n->left.
Now, if n->left is nil, we just return.w
Fix inconsistencies between programs and their usage
messages, correct instances where information seems
to be missing or lost. This includes missing arguments,
making usage consistent with manuals, and so on.
