- do not write /net/ndb for loopback medium unless -p is specified
- use defmask() instead of hardcoded /64 for v6 to get correct /128 mask for ::1
- only do duplicate address detection on ethernet
- increase buffer size to support up to 4096 bit RSA keys
- handle PMTUDiscovery option and respond to pmtu probes
- handle port in Address option
- wlock(&netlk) before closing udpfd to sync with writers
- move default subnet handling out of gethost()
using ~IP_DF mask to select offset and "more fragments" bits
includes the evil bit 15. so instead define a constant IP_FO
for the fragment offset bits and use (IP_MF|IP_FO). that way
the evil bit gets ignored and doesnt cause any useless calls
to ipreassemble().
tested on a t43 with igfx and a 1600x1200 t43p screen
what works: lvds, blanking
what doesn't: hwgc (not visible), snarfing edid
untested: vga
based on realemu traces.
only try listen/dial on udp when IndirectData/TcpOnly is not
enabled.
add support for scipts:
host-up
host-down
tinc-up
tinc-down
subnet-up
subnet-down
when dialing udp connection, only switch when there is no
other udp connection active. when we receive an authenticated
message, we switch to that connection immidiately.
unfraglen() had the side effect that it would always copy the
nexthdr field from the fragment header to the previous nexthdr
field. this is fine when we reassemble packets but breaks
fragments that we want to just forward unchanged.
given that we now keep the block size consistent with the
ip packet size, the variable header part of the ip packet
is just: BLEN(bp) - fp->flen == fp->hlen.
fix bug in ip6reassemble() in the non-fragmented case:
reload ih after ip header was moved before writing ih->ploadlen.
use concatbloc() instead of pullupblock().
some protocols assume that Ip4hdr.length[] and Ip6hdr.ploadlen[]
are valid and not out of range within the block but this has
not been verified. also, the ipv4 and ipv6 headers can have variable
length options, which was not considered in the fragmentation and
reassembly code.
to make this sane, ipiput4() and ipiput6() now verify that everything
is in range and trims to block to the expected size before it does
any further processing. now blocklen() and Ip4hdr.length[] are conistent.
ipoput4() and ipoput6() are simpler now, as they can rely on
blocklen() only, not having a special routing case.
ip fragmentation reassembly has to consider that fragments could
arrive with different ip header options, so we store the header+option
size in new Ipfrag.hlen field.
unfraglen() has to make sure not to run past the buffer, and hadle
the case when it encounters multiple fragment headers.
kivik wrote:
I've found a nasty bug in lib9p handling of Tversion
messages, where an invalid version string in the request
leads to servers abort()ing the spaceship.
To reproduce:
; ramfs -S ram
; aux/9pcon /srv/ram
Tversion ~0 DIE
The issue lies in sversion() where in case an invalid
version string is received we respond right away with
ofcall.version="unknown"; however, we fail to set the
ofcall.msize, which at this point is cleared to 0. This
causes the convS2M call in respond() to fail and abort being
called.
