mirror of
https://github.com/reactos/reactos.git
synced 2024-07-02 18:54:25 +00:00
8049 lines
267 KiB
MonkeyC
8049 lines
267 KiB
MonkeyC
|
|
MessageIdTypedef=DWORD
|
|
|
|
SeverityNames=(Success=0x0:STATUS_SEVERITY_SUCCESS
|
|
Informational=0x1:STATUS_SEVERITY_INFORMATIONAL
|
|
Warning=0x2:STATUS_SEVERITY_WARNING
|
|
Error=0x3:STATUS_SEVERITY_ERROR
|
|
)
|
|
|
|
FacilityNames=(System=0x0:FACILITY_SYSTEM
|
|
)
|
|
|
|
LanguageNames=(English=0x409:MSG00409
|
|
German=0x407:MSG00407
|
|
Polish=0x415:MSG00415
|
|
Portugese=0x816:MSG00416
|
|
Romanian=0x418:MSG00418
|
|
Russian=0x419:MSG00419
|
|
Albanian=0x41C:MSG0041C
|
|
Turkish=0x41F:MSG0041F
|
|
Chinese=0x804:MSG00804
|
|
Taiwanese=0x404:MSG00404
|
|
)
|
|
|
|
|
|
MessageId=10000
|
|
SymbolicName=MSG_COMMAND_ACTIVE
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as active.
|
|
|
|
Syntax: ACTIVE
|
|
|
|
Writes a value to the disk which is read by the basic input/output
|
|
system (BIOS) at boot. This value specifies that the partition is
|
|
a valid system partition.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
DiskPart verifies only that the partition is capable of containing the
|
|
operating system startup files. DiskPart does not check the contents of
|
|
the partition. If you mistakenly mark a partition as active and it does
|
|
not contain the operating system startup files, your computer might not
|
|
start.
|
|
|
|
Example:
|
|
|
|
ACTIVE
|
|
.
|
|
Language=German
|
|
Markiert auf Datenträgern mit MBR-Datenträgerformat (Master Boot
|
|
Record) die Partition, die den Fokus hat, als aktive Partition.
|
|
|
|
Syntax: ACTIVE
|
|
|
|
Schreibt einen Wert auf den Datenträger, der Beim Start vom BIOS
|
|
(Basic Input/Output System) gelesen wird. Durch diesen Wert wird
|
|
angegeben, dass die Partition eine gültige Systempartition ist.
|
|
|
|
Damit dieser Vorgang erfolgreich ausgeführt werden kann, muss eine
|
|
Partition ausgewählt sein.
|
|
|
|
Vorsicht:
|
|
|
|
DiskPart überprüft nur, ob die Partition in der Lage ist, die
|
|
Startdateien des Betriebssystems aufzunehmen. Der Inhalt der Partition
|
|
wird hierbei nicht überprüft. Falls versehentlich eine Partition als
|
|
aktiv markiert wird, die nicht die Startdateien des Betriebssystems
|
|
enthält, kann der Computer möglicherweise nicht gestartet werden.
|
|
|
|
Beispiel:
|
|
|
|
ACTIVE
|
|
.
|
|
Language=Polish
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as active.
|
|
|
|
Syntax: ACTIVE
|
|
|
|
Writes a value to the disk which is read by the basic input/output
|
|
system (BIOS) at boot. This value specifies that the partition is
|
|
a valid system partition.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
DiskPart verifies only that the partition is capable of containing the
|
|
operating system startup files. DiskPart does not check the contents of
|
|
the partition. If you mistakenly mark a partition as active and it does
|
|
not contain the operating system startup files, your computer might not
|
|
start.
|
|
|
|
Example:
|
|
|
|
ACTIVE
|
|
.
|
|
Language=Portugese
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as active.
|
|
|
|
Syntax: ACTIVE
|
|
|
|
Writes a value to the disk which is read by the basic input/output
|
|
system (BIOS) at boot. This value specifies that the partition is
|
|
a valid system partition.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
DiskPart verifies only that the partition is capable of containing the
|
|
operating system startup files. DiskPart does not check the contents of
|
|
the partition. If you mistakenly mark a partition as active and it does
|
|
not contain the operating system startup files, your computer might not
|
|
start.
|
|
|
|
Example:
|
|
|
|
ACTIVE
|
|
.
|
|
Language=Romanian
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as active.
|
|
|
|
Syntax: ACTIVE
|
|
|
|
Writes a value to the disk which is read by the basic input/output
|
|
system (BIOS) at boot. This value specifies that the partition is
|
|
a valid system partition.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
DiskPart verifies only that the partition is capable of containing the
|
|
operating system startup files. DiskPart does not check the contents of
|
|
the partition. If you mistakenly mark a partition as active and it does
|
|
not contain the operating system startup files, your computer might not
|
|
start.
|
|
|
|
Example:
|
|
|
|
ACTIVE
|
|
.
|
|
Language=Russian
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as active.
|
|
|
|
Syntax: ACTIVE
|
|
|
|
Writes a value to the disk which is read by the basic input/output
|
|
system (BIOS) at boot. This value specifies that the partition is
|
|
a valid system partition.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
DiskPart verifies only that the partition is capable of containing the
|
|
operating system startup files. DiskPart does not check the contents of
|
|
the partition. If you mistakenly mark a partition as active and it does
|
|
not contain the operating system startup files, your computer might not
|
|
start.
|
|
|
|
Example:
|
|
|
|
ACTIVE
|
|
.
|
|
Language=Albanian
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as active.
|
|
|
|
Syntax: ACTIVE
|
|
|
|
Writes a value to the disk which is read by the basic input/output
|
|
system (BIOS) at boot. This value specifies that the partition is
|
|
a valid system partition.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
DiskPart verifies only that the partition is capable of containing the
|
|
operating system startup files. DiskPart does not check the contents of
|
|
the partition. If you mistakenly mark a partition as active and it does
|
|
not contain the operating system startup files, your computer might not
|
|
start.
|
|
|
|
Example:
|
|
|
|
ACTIVE
|
|
.
|
|
Language=Turkish
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as active.
|
|
|
|
Syntax: ACTIVE
|
|
|
|
Writes a value to the disk which is read by the basic input/output
|
|
system (BIOS) at boot. This value specifies that the partition is
|
|
a valid system partition.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
DiskPart verifies only that the partition is capable of containing the
|
|
operating system startup files. DiskPart does not check the contents of
|
|
the partition. If you mistakenly mark a partition as active and it does
|
|
not contain the operating system startup files, your computer might not
|
|
start.
|
|
|
|
Example:
|
|
|
|
ACTIVE
|
|
.
|
|
Language=Chinese
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as active.
|
|
|
|
Syntax: ACTIVE
|
|
|
|
Writes a value to the disk which is read by the basic input/output
|
|
system (BIOS) at boot. This value specifies that the partition is
|
|
a valid system partition.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
DiskPart verifies only that the partition is capable of containing the
|
|
operating system startup files. DiskPart does not check the contents of
|
|
the partition. If you mistakenly mark a partition as active and it does
|
|
not contain the operating system startup files, your computer might not
|
|
start.
|
|
|
|
Example:
|
|
|
|
ACTIVE
|
|
.
|
|
Language=Taiwanese
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as active.
|
|
|
|
Syntax: ACTIVE
|
|
|
|
Writes a value to the disk which is read by the basic input/output
|
|
system (BIOS) at boot. This value specifies that the partition is
|
|
a valid system partition.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
DiskPart verifies only that the partition is capable of containing the
|
|
operating system startup files. DiskPart does not check the contents of
|
|
the partition. If you mistakenly mark a partition as active and it does
|
|
not contain the operating system startup files, your computer might not
|
|
start.
|
|
|
|
Example:
|
|
|
|
ACTIVE
|
|
.
|
|
|
|
|
|
MessageId=10001
|
|
SymbolicName=MSG_COMMAND_ADD
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add ADD command help text here>
|
|
.
|
|
Language=German
|
|
<Add ADD command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add ADD command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add ADD command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add ADD command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add ADD command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add ADD command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add ADD command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add ADD command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add ADD command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10002
|
|
SymbolicName=MSG_COMMAND_ASSIGN
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add ASSIGN command help text here>
|
|
.
|
|
Language=German
|
|
<Add ASSIGN command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add ASSIGN command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add ASSIGN command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add ASSIGN command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add ASSIGN command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add ASSIGN command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add ASSIGN command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add ASSIGN command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add ASSIGN command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10003
|
|
SymbolicName=MSG_COMMAND_ATTACH
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add ATTACH command help text here>
|
|
.
|
|
Language=German
|
|
<Add ATTACH command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add ATTACH command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add ATTACH command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add ATTACH command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add ATTACH command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add ATTACH command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add ATTACH command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add ATTACH command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add ATTACH command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10004
|
|
SymbolicName=MSG_COMMAND_ATTRIBUTES
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add ATTRIBUTES command help text here>
|
|
.
|
|
Language=German
|
|
<Add ATTRIBUTES command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add ATTRIBUTES command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add ATTRIBUTES command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add ATTRIBUTES command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add ATTRIBUTES command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add ATTRIBUTES command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add ATTRIBUTES command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add ATTRIBUTES command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add ATTRIBUTES command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10005
|
|
SymbolicName=MSG_COMMAND_AUTOMOUNT
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add AUTOMOUNT command help text here>
|
|
.
|
|
Language=German
|
|
<Add AUTOMOUNT command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add AUTOMOUNT command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add AUTOMOUNT command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add AUTOMOUNT command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add AUTOMOUNT command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add AUTOMOUNT command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add AUTOMOUNT command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add AUTOMOUNT command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add AUTOMOUNT command help text here>
|
|
.
|
|
|
|
|
|
|
|
MessageId=10006
|
|
SymbolicName=MSG_COMMAND_BREAK
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add BREAK command help text here>
|
|
.
|
|
Language=German
|
|
<Add BREAK command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add BREAK command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add BREAK command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add BREAK command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add BREAK command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add BREAK command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add BREAK command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add BREAK command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add BREAK command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10007
|
|
SymbolicName=MSG_COMMAND_CLEAN
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Removes any and all partition or volume formatting from the disk with
|
|
focus.
|
|
|
|
Syntax: CLEAN [ALL]
|
|
|
|
ALL Specifies that each and every byte\sector on the disk is set to
|
|
zero, which completely deletes all data contained on the disk.
|
|
|
|
On master boot record (MBR) disks, only the MBR partitioning information
|
|
and hidden sector information are overwritten. On GUID partition table
|
|
(GPT) disks, the GPT partitioning information, including the Protective
|
|
MBR, is overwritten. If the ALL parameter is not used, the first 1MB
|
|
and the last 1MB of the disk are zeroed. This erases any disk formatting
|
|
that had been previously applied to the disk. The disk's state after
|
|
cleaning the disk is 'UNINITIALIZED'.
|
|
|
|
Example:
|
|
|
|
CLEAN
|
|
.
|
|
Language=German
|
|
Entfernt alle Partitions- oder Volumeformatierungen von dem Datenträger
|
|
mit dem Fokus.
|
|
|
|
Syntax: CLEAN [ALL]
|
|
|
|
ALL Gibt an, dass jedes Byte\jeder Sektor auf dem Datenträger
|
|
auf Null gesetzt wird. Damit werden alle auf dem Datenträger
|
|
enthaltenen Daten vollständig gelöscht.
|
|
|
|
Auf MBR-Datenträgern (Master Boot Record) werden nur MBR-
|
|
Partitionierungsinformationen und Informationen zu ausgeblendeten
|
|
Sektoren überschrieben. Auf GUID-Partitionstabellen-Datenträgern
|
|
(GPT) werden die GPT-Partitionierungsinformationen (einschließlich
|
|
Schutz-MBR) überschrieben. If the ALL parameter is not used, the first 1MB
|
|
and the last 1MB of the disk are zeroed. This erases any disk formatting
|
|
that had been previously applied to the disk. The disk's state after
|
|
cleaning the disk is 'UNINITIALIZED'.
|
|
|
|
Beispiel:
|
|
|
|
CLEAN
|
|
.
|
|
Language=Polish
|
|
Removes any and all partition or volume formatting from the disk with
|
|
focus.
|
|
|
|
Syntax: CLEAN [ALL]
|
|
|
|
ALL Specifies that each and every byte\sector on the disk is set to
|
|
zero, which completely deletes all data contained on the disk.
|
|
|
|
On master boot record (MBR) disks, only the MBR partitioning information
|
|
and hidden sector information are overwritten. On GUID partition table
|
|
(GPT) disks, the GPT partitioning information, including the Protective
|
|
MBR, is overwritten. If the ALL parameter is not used, the first 1MB
|
|
and the last 1MB of the disk are zeroed. This erases any disk formatting
|
|
that had been previously applied to the disk. The disk's state after
|
|
cleaning the disk is 'UNINITIALIZED'.
|
|
|
|
Example:
|
|
|
|
CLEAN
|
|
.
|
|
Language=Portugese
|
|
Removes any and all partition or volume formatting from the disk with
|
|
focus.
|
|
|
|
Syntax: CLEAN [ALL]
|
|
|
|
ALL Specifies that each and every byte\sector on the disk is set to
|
|
zero, which completely deletes all data contained on the disk.
|
|
|
|
On master boot record (MBR) disks, only the MBR partitioning information
|
|
and hidden sector information are overwritten. On GUID partition table
|
|
(GPT) disks, the GPT partitioning information, including the Protective
|
|
MBR, is overwritten. If the ALL parameter is not used, the first 1MB
|
|
and the last 1MB of the disk are zeroed. This erases any disk formatting
|
|
that had been previously applied to the disk. The disk's state after
|
|
cleaning the disk is 'UNINITIALIZED'.
|
|
|
|
Example:
|
|
|
|
CLEAN
|
|
.
|
|
Language=Romanian
|
|
Removes any and all partition or volume formatting from the disk with
|
|
focus.
|
|
|
|
Syntax: CLEAN [ALL]
|
|
|
|
ALL Specifies that each and every byte\sector on the disk is set to
|
|
zero, which completely deletes all data contained on the disk.
|
|
|
|
On master boot record (MBR) disks, only the MBR partitioning information
|
|
and hidden sector information are overwritten. On GUID partition table
|
|
(GPT) disks, the GPT partitioning information, including the Protective
|
|
MBR, is overwritten. If the ALL parameter is not used, the first 1MB
|
|
and the last 1MB of the disk are zeroed. This erases any disk formatting
|
|
that had been previously applied to the disk. The disk's state after
|
|
cleaning the disk is 'UNINITIALIZED'.
|
|
|
|
Example:
|
|
|
|
CLEAN
|
|
.
|
|
Language=Russian
|
|
Removes any and all partition or volume formatting from the disk with
|
|
focus.
|
|
|
|
Syntax: CLEAN [ALL]
|
|
|
|
ALL Specifies that each and every byte\sector on the disk is set to
|
|
zero, which completely deletes all data contained on the disk.
|
|
|
|
On master boot record (MBR) disks, only the MBR partitioning information
|
|
and hidden sector information are overwritten. On GUID partition table
|
|
(GPT) disks, the GPT partitioning information, including the Protective
|
|
MBR, is overwritten. If the ALL parameter is not used, the first 1MB
|
|
and the last 1MB of the disk are zeroed. This erases any disk formatting
|
|
that had been previously applied to the disk. The disk's state after
|
|
cleaning the disk is 'UNINITIALIZED'.
|
|
|
|
Example:
|
|
|
|
CLEAN
|
|
.
|
|
Language=Albanian
|
|
Removes any and all partition or volume formatting from the disk with
|
|
focus.
|
|
|
|
Syntax: CLEAN [ALL]
|
|
|
|
ALL Specifies that each and every byte\sector on the disk is set to
|
|
zero, which completely deletes all data contained on the disk.
|
|
|
|
On master boot record (MBR) disks, only the MBR partitioning information
|
|
and hidden sector information are overwritten. On GUID partition table
|
|
(GPT) disks, the GPT partitioning information, including the Protective
|
|
MBR, is overwritten. If the ALL parameter is not used, the first 1MB
|
|
and the last 1MB of the disk are zeroed. This erases any disk formatting
|
|
that had been previously applied to the disk. The disk's state after
|
|
cleaning the disk is 'UNINITIALIZED'.
|
|
|
|
Example:
|
|
|
|
CLEAN
|
|
.
|
|
Language=Turkish
|
|
Removes any and all partition or volume formatting from the disk with
|
|
focus.
|
|
|
|
Syntax: CLEAN [ALL]
|
|
|
|
ALL Specifies that each and every byte\sector on the disk is set to
|
|
zero, which completely deletes all data contained on the disk.
|
|
|
|
On master boot record (MBR) disks, only the MBR partitioning information
|
|
and hidden sector information are overwritten. On GUID partition table
|
|
(GPT) disks, the GPT partitioning information, including the Protective
|
|
MBR, is overwritten. If the ALL parameter is not used, the first 1MB
|
|
and the last 1MB of the disk are zeroed. This erases any disk formatting
|
|
that had been previously applied to the disk. The disk's state after
|
|
cleaning the disk is 'UNINITIALIZED'.
|
|
|
|
Example:
|
|
|
|
CLEAN
|
|
.
|
|
Language=Chinese
|
|
Removes any and all partition or volume formatting from the disk with
|
|
focus.
|
|
|
|
Syntax: CLEAN [ALL]
|
|
|
|
ALL Specifies that each and every byte\sector on the disk is set to
|
|
zero, which completely deletes all data contained on the disk.
|
|
|
|
On master boot record (MBR) disks, only the MBR partitioning information
|
|
and hidden sector information are overwritten. On GUID partition table
|
|
(GPT) disks, the GPT partitioning information, including the Protective
|
|
MBR, is overwritten. If the ALL parameter is not used, the first 1MB
|
|
and the last 1MB of the disk are zeroed. This erases any disk formatting
|
|
that had been previously applied to the disk. The disk's state after
|
|
cleaning the disk is 'UNINITIALIZED'.
|
|
|
|
Example:
|
|
|
|
CLEAN
|
|
.
|
|
Language=Taiwanese
|
|
Removes any and all partition or volume formatting from the disk with
|
|
focus.
|
|
|
|
Syntax: CLEAN [ALL]
|
|
|
|
ALL Specifies that each and every byte\sector on the disk is set to
|
|
zero, which completely deletes all data contained on the disk.
|
|
|
|
On master boot record (MBR) disks, only the MBR partitioning information
|
|
and hidden sector information are overwritten. On GUID partition table
|
|
(GPT) disks, the GPT partitioning information, including the Protective
|
|
MBR, is overwritten. If the ALL parameter is not used, the first 1MB
|
|
and the last 1MB of the disk are zeroed. This erases any disk formatting
|
|
that had been previously applied to the disk. The disk's state after
|
|
cleaning the disk is 'UNINITIALIZED'.
|
|
|
|
Example:
|
|
|
|
CLEAN
|
|
.
|
|
|
|
|
|
MessageId=10008
|
|
SymbolicName=MSG_COMMAND_COMPACT
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add COMPACT command help text here>
|
|
.
|
|
Language=German
|
|
<Add COMPACT command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add COMPACT command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add COMPACT command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add COMPACT command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add COMPACT command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add COMPACT command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add COMPACT command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add COMPACT command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add COMPACT command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10010
|
|
SymbolicName=MSG_COMMAND_CONVERT
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add CONVERT command help text here>
|
|
.
|
|
Language=German
|
|
<Add CONVERT command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add CONVERT command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add CONVERT command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add CONVERT command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add CONVERT command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add CONVERT command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add CONVERT command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add CONVERT command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add CONVERT command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10011
|
|
SymbolicName=MSG_COMMAND_CREATE_PARTITION_EFI
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add CREATE PARTITION EFI command help text here>
|
|
.
|
|
Language=German
|
|
<Add CREATE PARTITION EFI command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add CREATE PARTITION EFI command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add CREATE PARTITION EFI command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add CREATE PARTITION EFI command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add CREATE PARTITION EFI command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add CREATE PARTITION EFI command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add CREATE PARTITION EFI command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add CREATE PARTITION EFI command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add CREATE PARTITION EFI command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10012
|
|
SymbolicName=MSG_COMMAND_CREATE_PARTITION_EXTENDED
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Creates an extended partition on the disk with focus.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION EXTENDED [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more free
|
|
space in the extended partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is
|
|
created. If no offset is given, the partition will start
|
|
at the beginning of the first free space on the disk that
|
|
is large enough to hold the new partition.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new partition. Only one extended partition can be created per disk. This
|
|
command fails if you attempt to create an extended partition within another
|
|
extended partition. You must create an extended partition before you can
|
|
create logical partitions.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION EXTENDED SIZE=1000
|
|
.
|
|
Language=German
|
|
Erstellt eine erweiterte Partition auf dem Datenträger, der den Fokus
|
|
besitzt.
|
|
Gilt nur für MBR-Datenträger (Master Boot Record).
|
|
|
|
Syntax: CREATE PARTITION EXTENDED [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> Die Größe der Partition in MB. Falls keine Größe angegeben
|
|
ist, wird die Partition erweitert, bis auf der erweiterten
|
|
Partition kein freier Speicherplatz mehr vorhanden ist.
|
|
|
|
OFFSET=<N> Das Offset, in Kilobyte (KB), in dem die Partition
|
|
erstellt wird. Wird kein Offset angegeben, beginnt die
|
|
Partition am Anfang des ersten freien Speicherplatz auf dem
|
|
Datenträger, der eine ausreichende Größe für die neue Partition
|
|
besitzt.
|
|
|
|
ALIGN=<N> Wird normalerweise bei Hardware-RAID-Arrays mit logischen
|
|
Gerätenummern (LUN) zur Verbesserung der Leistung verwendet. Das
|
|
Offset der Partition ist ein Vielfaches von <N>. Bei Angabe des
|
|
Parameters OFFSET wird dieser auf das nächste Vielfache von <N>
|
|
gerundet.
|
|
|
|
NOERR Nur für Skripting. Bei einem Fehler setzt DiskPart die
|
|
Verarbeitung von Befehlen fort, als sei der Fehler nicht
|
|
aufgetreten.
|
|
Ohne den Parameter NOERR wird DiskPart bei einem Fehler mit
|
|
dem entsprechenden Fehlercode beendet.
|
|
|
|
Nachdem die Partition erstellt wurde, wird der Fokus automatisch auf die
|
|
neue Partition gesetzt. Auf jedem Datenträger kann jeweils nur eine
|
|
erw. Partition erstellt werden. Dieser Befehl kann nicht ausgeführt
|
|
werden, wenn versucht wird, eine erweiterte Partition innerhalb einer
|
|
anderen erweiterten Partition zu erstellen. Sie müssen zuerst eine
|
|
erweiterte Partition erstellen, bevor logische Partitionen erstellt werden
|
|
können.
|
|
|
|
Damit dieser Vorgang erfolgreich ausgeführt werden kann, muss ein
|
|
MBR-Basisdatenträger ausgewählt werden.
|
|
|
|
Beispiel:
|
|
|
|
CREATE PARTITION EXTENDED SIZE=1000
|
|
.
|
|
Language=Polish
|
|
Creates an extended partition on the disk with focus.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION EXTENDED [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more free
|
|
space in the extended partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is
|
|
created. If no offset is given, the partition will start
|
|
at the beginning of the first free space on the disk that
|
|
is large enough to hold the new partition.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new partition. Only one extended partition can be created per disk. This
|
|
command fails if you attempt to create an extended partition within another
|
|
extended partition. You must create an extended partition before you can
|
|
create logical partitions.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION EXTENDED SIZE=1000
|
|
.
|
|
Language=Portugese
|
|
Creates an extended partition on the disk with focus.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION EXTENDED [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more free
|
|
space in the extended partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is
|
|
created. If no offset is given, the partition will start
|
|
at the beginning of the first free space on the disk that
|
|
is large enough to hold the new partition.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new partition. Only one extended partition can be created per disk. This
|
|
command fails if you attempt to create an extended partition within another
|
|
extended partition. You must create an extended partition before you can
|
|
create logical partitions.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION EXTENDED SIZE=1000
|
|
.
|
|
Language=Romanian
|
|
Creates an extended partition on the disk with focus.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION EXTENDED [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more free
|
|
space in the extended partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is
|
|
created. If no offset is given, the partition will start
|
|
at the beginning of the first free space on the disk that
|
|
is large enough to hold the new partition.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new partition. Only one extended partition can be created per disk. This
|
|
command fails if you attempt to create an extended partition within another
|
|
extended partition. You must create an extended partition before you can
|
|
create logical partitions.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION EXTENDED SIZE=1000
|
|
.
|
|
Language=Russian
|
|
Creates an extended partition on the disk with focus.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION EXTENDED [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more free
|
|
space in the extended partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is
|
|
created. If no offset is given, the partition will start
|
|
at the beginning of the first free space on the disk that
|
|
is large enough to hold the new partition.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new partition. Only one extended partition can be created per disk. This
|
|
command fails if you attempt to create an extended partition within another
|
|
extended partition. You must create an extended partition before you can
|
|
create logical partitions.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION EXTENDED SIZE=1000
|
|
.
|
|
Language=Albanian
|
|
Creates an extended partition on the disk with focus.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION EXTENDED [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more free
|
|
space in the extended partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is
|
|
created. If no offset is given, the partition will start
|
|
at the beginning of the first free space on the disk that
|
|
is large enough to hold the new partition.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new partition. Only one extended partition can be created per disk. This
|
|
command fails if you attempt to create an extended partition within another
|
|
extended partition. You must create an extended partition before you can
|
|
create logical partitions.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION EXTENDED SIZE=1000
|
|
.
|
|
Language=Turkish
|
|
Creates an extended partition on the disk with focus.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION EXTENDED [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more free
|
|
space in the extended partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is
|
|
created. If no offset is given, the partition will start
|
|
at the beginning of the first free space on the disk that
|
|
is large enough to hold the new partition.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new partition. Only one extended partition can be created per disk. This
|
|
command fails if you attempt to create an extended partition within another
|
|
extended partition. You must create an extended partition before you can
|
|
create logical partitions.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION EXTENDED SIZE=1000
|
|
.
|
|
Language=Chinese
|
|
Creates an extended partition on the disk with focus.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION EXTENDED [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more free
|
|
space in the extended partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is
|
|
created. If no offset is given, the partition will start
|
|
at the beginning of the first free space on the disk that
|
|
is large enough to hold the new partition.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new partition. Only one extended partition can be created per disk. This
|
|
command fails if you attempt to create an extended partition within another
|
|
extended partition. You must create an extended partition before you can
|
|
create logical partitions.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION EXTENDED SIZE=1000
|
|
.
|
|
Language=Taiwanese
|
|
Creates an extended partition on the disk with focus.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION EXTENDED [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more free
|
|
space in the extended partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is
|
|
created. If no offset is given, the partition will start
|
|
at the beginning of the first free space on the disk that
|
|
is large enough to hold the new partition.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new partition. Only one extended partition can be created per disk. This
|
|
command fails if you attempt to create an extended partition within another
|
|
extended partition. You must create an extended partition before you can
|
|
create logical partitions.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION EXTENDED SIZE=1000
|
|
.
|
|
|
|
|
|
MessageId=10013
|
|
SymbolicName=MSG_COMMAND_CREATE_PARTITION_LOGICAL
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Creates a logical partition in an extended partition.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION LOGICAL [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). The partition is
|
|
at least as big in bytes as the number specified by N. If you
|
|
specify a size for the logical partition, it must be smaller
|
|
than the extended partition. If no size is given, the partition
|
|
continues until there is no more free space in the extended
|
|
partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new logical partition.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION LOGICAL SIZE=1000
|
|
.
|
|
Language=German
|
|
Erstellt eine logische Partition in einer erweiterten Partition.
|
|
Gilt nur für MBR-Datenträger (Master Boot Record).
|
|
|
|
Syntax: CREATE PARTITION LOGICAL [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> Die Größe der Partition in MB. Die Länge der Partition in MB.
|
|
Die Länge der Partition in Byte entspricht mindestens dem durch
|
|
N angegebenen Wert. Wenn Sie eine Größe für die logische
|
|
Partition angeben, muss diese kleiner sein als die erweiterte
|
|
Partition. Falls keine Größe angegeben ist, wird die Partition
|
|
erweitert, bis sie den gesamten freien Speicherplatz im
|
|
Bereich umfasst.
|
|
|
|
OFFSET=<N> Das Offset, in Kilobyte (KB), an dem die Partition erstellt
|
|
wird. Falls kein Offset angegeben ist, wird die Partition im
|
|
ersten Datenträgerbereich erstellt, der eine ausreichende Größe
|
|
für die Partition hat.
|
|
|
|
ALIGN=<N> Wird normalerweise bei Hardware-RAID-Arrays mit logischen
|
|
Gerätenummern (LUN) zur Verbesserung der Leistung verwendet. Das
|
|
Offset der Partition ist ein Vielfaches von <N>. Bei Angabe des
|
|
Parameters OFFSET wird dieser auf das nächste Vielfache von <N>
|
|
gerundet.
|
|
|
|
NOERR Nur für Skripting. Bei einem Fehler setzt DiskPart die
|
|
Verarbeitung von Befehlen fort, als sei der Fehler nicht
|
|
aufgetreten. Ohne den Parameter NOERR wird DiskPart bei einem
|
|
Fehler mit dem entsprechenden Fehlercode beendet.
|
|
|
|
Nachdem die Partition erstellt wurde, wird der Fokus automatisch auf die
|
|
neue logische Partition gesetzt.
|
|
|
|
Damit dieser Vorgang erfolgreich ausgeführt werden kann, muss ein
|
|
MBR-Basisdatenträger ausgewählt sein.
|
|
|
|
Beispiel:
|
|
|
|
CREATE PARTITION LOGICAL SIZE=1000
|
|
.
|
|
Language=Polish
|
|
Creates a logical partition in an extended partition.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION LOGICAL [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). The partition is
|
|
at least as big in bytes as the number specified by N. If you
|
|
specify a size for the logical partition, it must be smaller
|
|
than the extended partition. If no size is given, the partition
|
|
continues until there is no more free space in the extended
|
|
partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new logical partition.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION LOGICAL SIZE=1000
|
|
.
|
|
Language=Portugese
|
|
Creates a logical partition in an extended partition.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION LOGICAL [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). The partition is
|
|
at least as big in bytes as the number specified by N. If you
|
|
specify a size for the logical partition, it must be smaller
|
|
than the extended partition. If no size is given, the partition
|
|
continues until there is no more free space in the extended
|
|
partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new logical partition.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION LOGICAL SIZE=1000
|
|
.
|
|
Language=Romanian
|
|
Creates a logical partition in an extended partition.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION LOGICAL [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). The partition is
|
|
at least as big in bytes as the number specified by N. If you
|
|
specify a size for the logical partition, it must be smaller
|
|
than the extended partition. If no size is given, the partition
|
|
continues until there is no more free space in the extended
|
|
partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new logical partition.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION LOGICAL SIZE=1000
|
|
.
|
|
Language=Russian
|
|
Creates a logical partition in an extended partition.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION LOGICAL [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). The partition is
|
|
at least as big in bytes as the number specified by N. If you
|
|
specify a size for the logical partition, it must be smaller
|
|
than the extended partition. If no size is given, the partition
|
|
continues until there is no more free space in the extended
|
|
partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new logical partition.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION LOGICAL SIZE=1000
|
|
.
|
|
Language=Albanian
|
|
Creates a logical partition in an extended partition.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION LOGICAL [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). The partition is
|
|
at least as big in bytes as the number specified by N. If you
|
|
specify a size for the logical partition, it must be smaller
|
|
than the extended partition. If no size is given, the partition
|
|
continues until there is no more free space in the extended
|
|
partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new logical partition.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION LOGICAL SIZE=1000
|
|
.
|
|
Language=Turkish
|
|
Creates a logical partition in an extended partition.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION LOGICAL [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). The partition is
|
|
at least as big in bytes as the number specified by N. If you
|
|
specify a size for the logical partition, it must be smaller
|
|
than the extended partition. If no size is given, the partition
|
|
continues until there is no more free space in the extended
|
|
partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new logical partition.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION LOGICAL SIZE=1000
|
|
.
|
|
Language=Chinese
|
|
Creates a logical partition in an extended partition.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION LOGICAL [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). The partition is
|
|
at least as big in bytes as the number specified by N. If you
|
|
specify a size for the logical partition, it must be smaller
|
|
than the extended partition. If no size is given, the partition
|
|
continues until there is no more free space in the extended
|
|
partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new logical partition.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION LOGICAL SIZE=1000
|
|
.
|
|
Language=Taiwanese
|
|
Creates a logical partition in an extended partition.
|
|
Applies to master boot record (MBR) disks only.
|
|
|
|
Syntax: CREATE PARTITION LOGICAL [SIZE=<N>] [OFFSET=<N>] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). The partition is
|
|
at least as big in bytes as the number specified by N. If you
|
|
specify a size for the logical partition, it must be smaller
|
|
than the extended partition. If no size is given, the partition
|
|
continues until there is no more free space in the extended
|
|
partition.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After the partition has been created, the focus automatically shifts to the
|
|
new logical partition.
|
|
|
|
A basic MBR disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION LOGICAL SIZE=1000
|
|
.
|
|
|
|
|
|
MessageId=10014
|
|
SymbolicName=MSG_COMMAND_CREATE_PARTITION_MSR
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add CREATE PARTITION MSR command help text here>
|
|
.
|
|
Language=German
|
|
<Add CREATE PARTITION MSR command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add CREATE PARTITION MSR command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add CREATE PARTITION MSR command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add CREATE PARTITION MSR command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add CREATE PARTITION MSR command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add CREATE PARTITION MSR command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add CREATE PARTITION MSR command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add CREATE PARTITION MSR command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add CREATE PARTITION MSR command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10015
|
|
SymbolicName=MSG_COMMAND_CREATE_PARTITION_PRIMARY
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Creates a primary partition on the basic disk with focus.
|
|
|
|
Syntax: CREATE PARTITION PRIMARY [SIZE=<N>] [OFFSET=<N>] [ID={<BYTE> | <GUID>}]
|
|
[ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more
|
|
unallocated space in the current region.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the partition type.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. If this
|
|
parameter is not specified for an MBR disk, the command creates
|
|
a partition of type 0x06 (specifies no file system is installed).
|
|
|
|
LDM data partition:
|
|
0x42
|
|
|
|
Recovery partition:
|
|
0x27
|
|
|
|
Recognized OEM Ids:
|
|
0x12
|
|
0x84
|
|
0xDE
|
|
0xFE
|
|
0xA0
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition you want to create.
|
|
Recognized GUIDs include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215ae
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Recovery partition:
|
|
de94bba4-06d1-4d40-a16a-bfd50179d6ac
|
|
|
|
If this parameter is not specified for a GPT disk, the command
|
|
creates a basic data partition.
|
|
|
|
Any partition type byte or GUID can be specified with this
|
|
parameter. DiskPart does not check the partition type for
|
|
validity except to ensure that it is a byte in hexadecimal form
|
|
or a GUID.
|
|
|
|
Caution:
|
|
|
|
Creating partitions with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are
|
|
an OEM or an IT professional experienced with GPT disks, do
|
|
not create partitions on GPT disks using this parameter.
|
|
Instead, always use the CREATE PARTITION EFI command to
|
|
create EFI System partitions, the CREATE PARTITION MSR
|
|
command to create Microsoft Reserved partitions, and the
|
|
CREATE PARTITION PRIMARY command without this parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After you create the partition, the focus automatically shifts to the new
|
|
partition. The partition does not receive a drive letter. You must use the
|
|
assign command to assign a drive letter to the partition.
|
|
|
|
A basic disk must be selected for this operation to succeed.
|
|
|
|
If a partition type is not specified, the disk is uninitialized and disk
|
|
size is greater than 2TB, it will be initialized to GPT.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION PRIMARY SIZE=1000
|
|
CREATE PARTITION PRIMARY SIZE=128 ID=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=12
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=DE
|
|
.
|
|
Language=German
|
|
Erstellt eine primäre Partition auf dem Basisdatenträger, der den Fokus
|
|
hat.
|
|
|
|
Syntax: CREATE PARTITION PRIMARY [SIZE=<N>] [OFFSET=<N>]
|
|
[ID={<BYTE> | <GUID>}] [ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> Die Größe der Partition in MB. Falls keine Größe angegeben ist,
|
|
wird die Partition erweitert, bis sie den gesamten
|
|
verfügbaren Speicherplatz im aktuellen Bereich umfasst.
|
|
|
|
OFFSET=<N> Das Offset, in Kilobyte (KB), an dem die Partition erstellt
|
|
werden soll. Falls kein Offset angegeben ist, wird die
|
|
Partition in der ersten Datenträgererweiterung platziert, die
|
|
eine ausreichende Größe besitzt.
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Gibt den Partitionstyp an.
|
|
|
|
Zur ausschließlichen Verwendung durch Originalgerätehersteller.
|
|
|
|
Für MBR-Datenträger (Master Boot Record) können Sie für
|
|
die Partition ein Partitionstypbyte im Hexadezimalformat
|
|
angeben. Falls dieser Parameter für einen MBR-Datenträger
|
|
nicht angegeben ist, erstellt der Befehl eine Partition des
|
|
Typs 0x06 (gibt an, dass kein Dateisystem installiert ist).
|
|
|
|
LDM-Datenpartition:
|
|
0x42
|
|
|
|
Wiederherstellungspartition:
|
|
0x27
|
|
|
|
Erkannte OEM-IDs:
|
|
0x12
|
|
0x84
|
|
0xDE
|
|
0xFE
|
|
0xA0
|
|
|
|
Für GPT-Datenträger (GPT = GUID-Partitionstabelle) können Sie
|
|
einen Partitionstyp-GUID für die zu erstellende Partition
|
|
angeben. Zu den erkannten GUIDs gehören:
|
|
|
|
EFI-Systempartition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
MSR-Partition (Microsoft Reserved):
|
|
e3c9e316-0b5c-4db8-817d-f92df00215ae
|
|
|
|
Basisdatenpartition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
LDM-Metadatenpartition auf einem dynamischen Datenträger:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM-Datenpartition auf einem dynamischen Datenträger:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Wiederherstellungspartition:
|
|
de94bba4-06d1-4d40-a16a-bfd50179d6ac
|
|
|
|
Wenn dieser Parameter für einen GPT-Datenträger nicht angegeben
|
|
ist, wird mit diesem Befehl eine Basisdatenpartition erstellt.
|
|
|
|
Mit diesem Parameter kann ein beliebiger Partitionstyp
|
|
oder ein beliebiger GUID angegeben werden. DiskPart überprüft
|
|
die Gültigkeit dieses Partitions-GUIDs nicht. Es wird lediglich
|
|
sichergestellt, dass es sich um ein Byte im Hexadezimalformat
|
|
oder um einen GUID handelt.
|
|
|
|
Vorsicht:
|
|
|
|
Das Erstellen von Partitionen mit diesem Parameter kann
|
|
dazu führen, dass der Computer fehlerhaft arbeitet oder
|
|
nicht mehr gestartet werden kann. Sofern Sie kein Original-
|
|
gerätehersteller oder IT-Fachmann sind, der mit GPT-Daten-
|
|
trägern vertraut ist, sollten Sie keine Partitionen auf
|
|
GPT-Datenträgern mit diesem Parameter erstellen.
|
|
Verwenden Sie stattdessen immer den Befehl
|
|
CREATE PARTITION EFI zum Erstellen von EFI-System-
|
|
Partitionen, den Befehl CREATE PARTITION MSR zum Erstellen
|
|
von MSR-Partitionen und den Befehl
|
|
CREATE PARTITION PRIMARY (ohne diesen Parameter) zum
|
|
Erstellen von primären Partitionen auf GPT-Datenträgern.
|
|
|
|
ALIGN=<N> Wird normalerweise bei Hardware-RAID-Arrays mit logischen
|
|
Gerätenummern (LUN) zur Verbesserung der Leistung verwendet. Das
|
|
Offset der Partition ist ein Vielfaches von <N>. Bei Angabe des
|
|
Parameters OFFSET wird dieser auf das nächste Vielfache von <N>
|
|
gerundet.
|
|
|
|
NOERR Nur für Skripting. Bei einem Fehler setzt DiskPart die
|
|
Verarbeitung von Befehlen fort, als sei der Fehler nicht
|
|
aufgetreten. Ohne den Parameter NOERR wird DiskPart bei
|
|
einem Fehler mit dem entsprechenden Fehlercode beendet.
|
|
|
|
Nachdem Sie die Partition erstellt haben, wird der Fokus automatisch auf
|
|
die neue Partition gesetzt. Diese Partition erhält keinen Laufwerkbuch-
|
|
staben. Sie müssen der Partition mit dem Befehl ASSIGN einen Laufwerkbuch-
|
|
staben zuweisen.
|
|
|
|
Damit dieser Vorgang erfolgreich durchgeführt werden kann, muss ein Basis-
|
|
datenträger ausgewählt sein. Falls kein Partitionstyp angegeben ist, wird die Initialisierung
|
|
des Datenträgers aufgehoben, und wenn der Datenträger größer ist als 2 TB,
|
|
wird er für GPT initialisiert.
|
|
|
|
Beispiel:
|
|
|
|
CREATE PARTITION PRIMARY SIZE=1000
|
|
CREATE PARTITION PRIMARY SIZE=128 ID=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=12
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=DE
|
|
.
|
|
Language=Polish
|
|
Creates a primary partition on the basic disk with focus.
|
|
|
|
Syntax: CREATE PARTITION PRIMARY [SIZE=<N>] [OFFSET=<N>] [ID={<BYTE> | <GUID>}]
|
|
[ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more
|
|
unallocated space in the current region.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the partition type.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. If this
|
|
parameter is not specified for an MBR disk, the command creates
|
|
a partition of type 0x06 (specifies no file system is installed).
|
|
|
|
LDM data partition:
|
|
0x42
|
|
|
|
Recovery partition:
|
|
0x27
|
|
|
|
Recognized OEM Ids:
|
|
0x12
|
|
0x84
|
|
0xDE
|
|
0xFE
|
|
0xA0
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition you want to create.
|
|
Recognized GUIDs include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215ae
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Recovery partition:
|
|
de94bba4-06d1-4d40-a16a-bfd50179d6ac
|
|
|
|
If this parameter is not specified for a GPT disk, the command
|
|
creates a basic data partition.
|
|
|
|
Any partition type byte or GUID can be specified with this
|
|
parameter. DiskPart does not check the partition type for
|
|
validity except to ensure that it is a byte in hexadecimal form
|
|
or a GUID.
|
|
|
|
Caution:
|
|
|
|
Creating partitions with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are
|
|
an OEM or an IT professional experienced with GPT disks, do
|
|
not create partitions on GPT disks using this parameter.
|
|
Instead, always use the CREATE PARTITION EFI command to
|
|
create EFI System partitions, the CREATE PARTITION MSR
|
|
command to create Microsoft Reserved partitions, and the
|
|
CREATE PARTITION PRIMARY command without this parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After you create the partition, the focus automatically shifts to the new
|
|
partition. The partition does not receive a drive letter. You must use the
|
|
assign command to assign a drive letter to the partition.
|
|
|
|
A basic disk must be selected for this operation to succeed.
|
|
|
|
If a partition type is not specified, the disk is uninitialized and disk
|
|
size is greater than 2TB, it will be initialized to GPT.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION PRIMARY SIZE=1000
|
|
CREATE PARTITION PRIMARY SIZE=128 ID=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=12
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=DE
|
|
.
|
|
Language=Portugese
|
|
Creates a primary partition on the basic disk with focus.
|
|
|
|
Syntax: CREATE PARTITION PRIMARY [SIZE=<N>] [OFFSET=<N>] [ID={<BYTE> | <GUID>}]
|
|
[ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more
|
|
unallocated space in the current region.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the partition type.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. If this
|
|
parameter is not specified for an MBR disk, the command creates
|
|
a partition of type 0x06 (specifies no file system is installed).
|
|
|
|
LDM data partition:
|
|
0x42
|
|
|
|
Recovery partition:
|
|
0x27
|
|
|
|
Recognized OEM Ids:
|
|
0x12
|
|
0x84
|
|
0xDE
|
|
0xFE
|
|
0xA0
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition you want to create.
|
|
Recognized GUIDs include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215ae
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Recovery partition:
|
|
de94bba4-06d1-4d40-a16a-bfd50179d6ac
|
|
|
|
If this parameter is not specified for a GPT disk, the command
|
|
creates a basic data partition.
|
|
|
|
Any partition type byte or GUID can be specified with this
|
|
parameter. DiskPart does not check the partition type for
|
|
validity except to ensure that it is a byte in hexadecimal form
|
|
or a GUID.
|
|
|
|
Caution:
|
|
|
|
Creating partitions with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are
|
|
an OEM or an IT professional experienced with GPT disks, do
|
|
not create partitions on GPT disks using this parameter.
|
|
Instead, always use the CREATE PARTITION EFI command to
|
|
create EFI System partitions, the CREATE PARTITION MSR
|
|
command to create Microsoft Reserved partitions, and the
|
|
CREATE PARTITION PRIMARY command without this parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After you create the partition, the focus automatically shifts to the new
|
|
partition. The partition does not receive a drive letter. You must use the
|
|
assign command to assign a drive letter to the partition.
|
|
|
|
A basic disk must be selected for this operation to succeed.
|
|
|
|
If a partition type is not specified, the disk is uninitialized and disk
|
|
size is greater than 2TB, it will be initialized to GPT.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION PRIMARY SIZE=1000
|
|
CREATE PARTITION PRIMARY SIZE=128 ID=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=12
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=DE
|
|
.
|
|
Language=Romanian
|
|
Creates a primary partition on the basic disk with focus.
|
|
|
|
Syntax: CREATE PARTITION PRIMARY [SIZE=<N>] [OFFSET=<N>] [ID={<BYTE> | <GUID>}]
|
|
[ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more
|
|
unallocated space in the current region.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the partition type.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. If this
|
|
parameter is not specified for an MBR disk, the command creates
|
|
a partition of type 0x06 (specifies no file system is installed).
|
|
|
|
LDM data partition:
|
|
0x42
|
|
|
|
Recovery partition:
|
|
0x27
|
|
|
|
Recognized OEM Ids:
|
|
0x12
|
|
0x84
|
|
0xDE
|
|
0xFE
|
|
0xA0
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition you want to create.
|
|
Recognized GUIDs include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215ae
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Recovery partition:
|
|
de94bba4-06d1-4d40-a16a-bfd50179d6ac
|
|
|
|
If this parameter is not specified for a GPT disk, the command
|
|
creates a basic data partition.
|
|
|
|
Any partition type byte or GUID can be specified with this
|
|
parameter. DiskPart does not check the partition type for
|
|
validity except to ensure that it is a byte in hexadecimal form
|
|
or a GUID.
|
|
|
|
Caution:
|
|
|
|
Creating partitions with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are
|
|
an OEM or an IT professional experienced with GPT disks, do
|
|
not create partitions on GPT disks using this parameter.
|
|
Instead, always use the CREATE PARTITION EFI command to
|
|
create EFI System partitions, the CREATE PARTITION MSR
|
|
command to create Microsoft Reserved partitions, and the
|
|
CREATE PARTITION PRIMARY command without this parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After you create the partition, the focus automatically shifts to the new
|
|
partition. The partition does not receive a drive letter. You must use the
|
|
assign command to assign a drive letter to the partition.
|
|
|
|
A basic disk must be selected for this operation to succeed.
|
|
|
|
If a partition type is not specified, the disk is uninitialized and disk
|
|
size is greater than 2TB, it will be initialized to GPT.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION PRIMARY SIZE=1000
|
|
CREATE PARTITION PRIMARY SIZE=128 ID=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=12
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=DE
|
|
.
|
|
Language=Russian
|
|
Creates a primary partition on the basic disk with focus.
|
|
|
|
Syntax: CREATE PARTITION PRIMARY [SIZE=<N>] [OFFSET=<N>] [ID={<BYTE> | <GUID>}]
|
|
[ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more
|
|
unallocated space in the current region.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the partition type.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. If this
|
|
parameter is not specified for an MBR disk, the command creates
|
|
a partition of type 0x06 (specifies no file system is installed).
|
|
|
|
LDM data partition:
|
|
0x42
|
|
|
|
Recovery partition:
|
|
0x27
|
|
|
|
Recognized OEM Ids:
|
|
0x12
|
|
0x84
|
|
0xDE
|
|
0xFE
|
|
0xA0
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition you want to create.
|
|
Recognized GUIDs include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215ae
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Recovery partition:
|
|
de94bba4-06d1-4d40-a16a-bfd50179d6ac
|
|
|
|
If this parameter is not specified for a GPT disk, the command
|
|
creates a basic data partition.
|
|
|
|
Any partition type byte or GUID can be specified with this
|
|
parameter. DiskPart does not check the partition type for
|
|
validity except to ensure that it is a byte in hexadecimal form
|
|
or a GUID.
|
|
|
|
Caution:
|
|
|
|
Creating partitions with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are
|
|
an OEM or an IT professional experienced with GPT disks, do
|
|
not create partitions on GPT disks using this parameter.
|
|
Instead, always use the CREATE PARTITION EFI command to
|
|
create EFI System partitions, the CREATE PARTITION MSR
|
|
command to create Microsoft Reserved partitions, and the
|
|
CREATE PARTITION PRIMARY command without this parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After you create the partition, the focus automatically shifts to the new
|
|
partition. The partition does not receive a drive letter. You must use the
|
|
assign command to assign a drive letter to the partition.
|
|
|
|
A basic disk must be selected for this operation to succeed.
|
|
|
|
If a partition type is not specified, the disk is uninitialized and disk
|
|
size is greater than 2TB, it will be initialized to GPT.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION PRIMARY SIZE=1000
|
|
CREATE PARTITION PRIMARY SIZE=128 ID=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=12
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=DE
|
|
.
|
|
Language=Albanian
|
|
Creates a primary partition on the basic disk with focus.
|
|
|
|
Syntax: CREATE PARTITION PRIMARY [SIZE=<N>] [OFFSET=<N>] [ID={<BYTE> | <GUID>}]
|
|
[ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more
|
|
unallocated space in the current region.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the partition type.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. If this
|
|
parameter is not specified for an MBR disk, the command creates
|
|
a partition of type 0x06 (specifies no file system is installed).
|
|
|
|
LDM data partition:
|
|
0x42
|
|
|
|
Recovery partition:
|
|
0x27
|
|
|
|
Recognized OEM Ids:
|
|
0x12
|
|
0x84
|
|
0xDE
|
|
0xFE
|
|
0xA0
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition you want to create.
|
|
Recognized GUIDs include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215ae
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Recovery partition:
|
|
de94bba4-06d1-4d40-a16a-bfd50179d6ac
|
|
|
|
If this parameter is not specified for a GPT disk, the command
|
|
creates a basic data partition.
|
|
|
|
Any partition type byte or GUID can be specified with this
|
|
parameter. DiskPart does not check the partition type for
|
|
validity except to ensure that it is a byte in hexadecimal form
|
|
or a GUID.
|
|
|
|
Caution:
|
|
|
|
Creating partitions with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are
|
|
an OEM or an IT professional experienced with GPT disks, do
|
|
not create partitions on GPT disks using this parameter.
|
|
Instead, always use the CREATE PARTITION EFI command to
|
|
create EFI System partitions, the CREATE PARTITION MSR
|
|
command to create Microsoft Reserved partitions, and the
|
|
CREATE PARTITION PRIMARY command without this parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After you create the partition, the focus automatically shifts to the new
|
|
partition. The partition does not receive a drive letter. You must use the
|
|
assign command to assign a drive letter to the partition.
|
|
|
|
A basic disk must be selected for this operation to succeed.
|
|
|
|
If a partition type is not specified, the disk is uninitialized and disk
|
|
size is greater than 2TB, it will be initialized to GPT.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION PRIMARY SIZE=1000
|
|
CREATE PARTITION PRIMARY SIZE=128 ID=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=12
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=DE
|
|
.
|
|
Language=Turkish
|
|
Creates a primary partition on the basic disk with focus.
|
|
|
|
Syntax: CREATE PARTITION PRIMARY [SIZE=<N>] [OFFSET=<N>] [ID={<BYTE> | <GUID>}]
|
|
[ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more
|
|
unallocated space in the current region.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the partition type.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. If this
|
|
parameter is not specified for an MBR disk, the command creates
|
|
a partition of type 0x06 (specifies no file system is installed).
|
|
|
|
LDM data partition:
|
|
0x42
|
|
|
|
Recovery partition:
|
|
0x27
|
|
|
|
Recognized OEM Ids:
|
|
0x12
|
|
0x84
|
|
0xDE
|
|
0xFE
|
|
0xA0
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition you want to create.
|
|
Recognized GUIDs include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215ae
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Recovery partition:
|
|
de94bba4-06d1-4d40-a16a-bfd50179d6ac
|
|
|
|
If this parameter is not specified for a GPT disk, the command
|
|
creates a basic data partition.
|
|
|
|
Any partition type byte or GUID can be specified with this
|
|
parameter. DiskPart does not check the partition type for
|
|
validity except to ensure that it is a byte in hexadecimal form
|
|
or a GUID.
|
|
|
|
Caution:
|
|
|
|
Creating partitions with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are
|
|
an OEM or an IT professional experienced with GPT disks, do
|
|
not create partitions on GPT disks using this parameter.
|
|
Instead, always use the CREATE PARTITION EFI command to
|
|
create EFI System partitions, the CREATE PARTITION MSR
|
|
command to create Microsoft Reserved partitions, and the
|
|
CREATE PARTITION PRIMARY command without this parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After you create the partition, the focus automatically shifts to the new
|
|
partition. The partition does not receive a drive letter. You must use the
|
|
assign command to assign a drive letter to the partition.
|
|
|
|
A basic disk must be selected for this operation to succeed.
|
|
|
|
If a partition type is not specified, the disk is uninitialized and disk
|
|
size is greater than 2TB, it will be initialized to GPT.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION PRIMARY SIZE=1000
|
|
CREATE PARTITION PRIMARY SIZE=128 ID=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=12
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=DE
|
|
.
|
|
Language=Chinese
|
|
Creates a primary partition on the basic disk with focus.
|
|
|
|
Syntax: CREATE PARTITION PRIMARY [SIZE=<N>] [OFFSET=<N>] [ID={<BYTE> | <GUID>}]
|
|
[ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more
|
|
unallocated space in the current region.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the partition type.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. If this
|
|
parameter is not specified for an MBR disk, the command creates
|
|
a partition of type 0x06 (specifies no file system is installed).
|
|
|
|
LDM data partition:
|
|
0x42
|
|
|
|
Recovery partition:
|
|
0x27
|
|
|
|
Recognized OEM Ids:
|
|
0x12
|
|
0x84
|
|
0xDE
|
|
0xFE
|
|
0xA0
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition you want to create.
|
|
Recognized GUIDs include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215ae
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Recovery partition:
|
|
de94bba4-06d1-4d40-a16a-bfd50179d6ac
|
|
|
|
If this parameter is not specified for a GPT disk, the command
|
|
creates a basic data partition.
|
|
|
|
Any partition type byte or GUID can be specified with this
|
|
parameter. DiskPart does not check the partition type for
|
|
validity except to ensure that it is a byte in hexadecimal form
|
|
or a GUID.
|
|
|
|
Caution:
|
|
|
|
Creating partitions with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are
|
|
an OEM or an IT professional experienced with GPT disks, do
|
|
not create partitions on GPT disks using this parameter.
|
|
Instead, always use the CREATE PARTITION EFI command to
|
|
create EFI System partitions, the CREATE PARTITION MSR
|
|
command to create Microsoft Reserved partitions, and the
|
|
CREATE PARTITION PRIMARY command without this parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After you create the partition, the focus automatically shifts to the new
|
|
partition. The partition does not receive a drive letter. You must use the
|
|
assign command to assign a drive letter to the partition.
|
|
|
|
A basic disk must be selected for this operation to succeed.
|
|
|
|
If a partition type is not specified, the disk is uninitialized and disk
|
|
size is greater than 2TB, it will be initialized to GPT.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION PRIMARY SIZE=1000
|
|
CREATE PARTITION PRIMARY SIZE=128 ID=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=12
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=DE
|
|
.
|
|
Language=Taiwanese
|
|
Creates a primary partition on the basic disk with focus.
|
|
|
|
Syntax: CREATE PARTITION PRIMARY [SIZE=<N>] [OFFSET=<N>] [ID={<BYTE> | <GUID>}]
|
|
[ALIGN=<N>] [NOERR]
|
|
|
|
SIZE=<N> The size of the partition in megabytes (MB). If no size is
|
|
given, the partition continues until there is no more
|
|
unallocated space in the current region.
|
|
|
|
OFFSET=<N> The offset, in kilobytes (KB), at which the partition is created.
|
|
If no offset is given, the partition is placed in the first disk
|
|
extent that is large enough to hold it.
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the partition type.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. If this
|
|
parameter is not specified for an MBR disk, the command creates
|
|
a partition of type 0x06 (specifies no file system is installed).
|
|
|
|
LDM data partition:
|
|
0x42
|
|
|
|
Recovery partition:
|
|
0x27
|
|
|
|
Recognized OEM Ids:
|
|
0x12
|
|
0x84
|
|
0xDE
|
|
0xFE
|
|
0xA0
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition you want to create.
|
|
Recognized GUIDs include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215ae
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Recovery partition:
|
|
de94bba4-06d1-4d40-a16a-bfd50179d6ac
|
|
|
|
If this parameter is not specified for a GPT disk, the command
|
|
creates a basic data partition.
|
|
|
|
Any partition type byte or GUID can be specified with this
|
|
parameter. DiskPart does not check the partition type for
|
|
validity except to ensure that it is a byte in hexadecimal form
|
|
or a GUID.
|
|
|
|
Caution:
|
|
|
|
Creating partitions with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are
|
|
an OEM or an IT professional experienced with GPT disks, do
|
|
not create partitions on GPT disks using this parameter.
|
|
Instead, always use the CREATE PARTITION EFI command to
|
|
create EFI System partitions, the CREATE PARTITION MSR
|
|
command to create Microsoft Reserved partitions, and the
|
|
CREATE PARTITION PRIMARY command without this parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
ALIGN=<N> Typically used with hardware RAID Logical Unit Number (LUN)
|
|
arrays to improve performance. The partition offset will be
|
|
a multiple of <N>. If the OFFSET parameter is specified, it
|
|
will be rounded to the closest multiple of <N>.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
After you create the partition, the focus automatically shifts to the new
|
|
partition. The partition does not receive a drive letter. You must use the
|
|
assign command to assign a drive letter to the partition.
|
|
|
|
A basic disk must be selected for this operation to succeed.
|
|
|
|
If a partition type is not specified, the disk is uninitialized and disk
|
|
size is greater than 2TB, it will be initialized to GPT.
|
|
|
|
Example:
|
|
|
|
CREATE PARTITION PRIMARY SIZE=1000
|
|
CREATE PARTITION PRIMARY SIZE=128 ID=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=12
|
|
CREATE PARTITION PRIMARY SIZE=10000 ID=DE
|
|
.
|
|
|
|
|
|
MessageId=10016
|
|
SymbolicName=MSG_COMMAND_DELETE_DISK
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add DELETE DISK command help text here>
|
|
.
|
|
Language=German
|
|
<Add DELETE DISK command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add DELETE DISK command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add DELETE DISK command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add DELETE DISK command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add DELETE DISK command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add DELETE DISK command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add DELETE DISK command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add DELETE DISK command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add DELETE DISK command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10017
|
|
SymbolicName=MSG_COMMAND_DELETE_PARTITION
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Deletes the partition with focus.
|
|
|
|
Syntax: DELETE PARTITION [NOERR] [OVERRIDE]
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
OVERRIDE Enables DiskPart to delete any partition regardless of type.
|
|
Typically, DiskPart only permits you to delete known data
|
|
partitions.
|
|
|
|
You cannot delete the system partition, boot partition, or any partition
|
|
that contains the active paging file or crash dump (memory dump) filed.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Partitions cannot be deleted from dynamic disks or created on dynamic
|
|
disks.
|
|
|
|
Example:
|
|
|
|
DELETE PARTITION
|
|
.
|
|
Language=German
|
|
Löscht die Partition, die den Fokus hat.
|
|
|
|
Syntax: DELETE PARTITION [NOERR] [OVERRIDE]
|
|
|
|
NOERR Nur für Skripting. Bei einem Fehler setzt DiskPart die
|
|
Verarbeitung von Befehlen fort, als sei der Fehler nicht
|
|
aufgetreten. Ohne den Parameter NOERR wird DiskPart bei
|
|
einem Fehler mit dem entsprechenden Fehlercode beendet.
|
|
|
|
OVERRIDE Ermöglicht DiskPart das Löschen einer beliebigen Partition
|
|
unabhängig von deren Typ. Normalerweise gestattet DiskPart
|
|
nur das Löschen bekannter Datenpartitionen.
|
|
|
|
Sie können keine Systempartition, Startpartition oder Partition löschen,
|
|
die eine aktive Auslagerungsdatei oder ein Absturzabbild (Speicherabbild)
|
|
enthält.
|
|
|
|
Damit dieser Vorgang erfolgreich ausgeführt werden kann, muss eine
|
|
Partition ausgewählt sein.
|
|
|
|
Partitionen könnnen nicht von dynamischen Datenträgern gelöscht oder auf
|
|
dynamischen Datenträgern erstellt werden.
|
|
|
|
Beispiel:
|
|
|
|
DELETE PARTITION
|
|
.
|
|
Language=Polish
|
|
Deletes the partition with focus.
|
|
|
|
Syntax: DELETE PARTITION [NOERR] [OVERRIDE]
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
OVERRIDE Enables DiskPart to delete any partition regardless of type.
|
|
Typically, DiskPart only permits you to delete known data
|
|
partitions.
|
|
|
|
You cannot delete the system partition, boot partition, or any partition
|
|
that contains the active paging file or crash dump (memory dump) filed.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Partitions cannot be deleted from dynamic disks or created on dynamic
|
|
disks.
|
|
|
|
Example:
|
|
|
|
DELETE PARTITION
|
|
.
|
|
Language=Portugese
|
|
Deletes the partition with focus.
|
|
|
|
Syntax: DELETE PARTITION [NOERR] [OVERRIDE]
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
OVERRIDE Enables DiskPart to delete any partition regardless of type.
|
|
Typically, DiskPart only permits you to delete known data
|
|
partitions.
|
|
|
|
You cannot delete the system partition, boot partition, or any partition
|
|
that contains the active paging file or crash dump (memory dump) filed.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Partitions cannot be deleted from dynamic disks or created on dynamic
|
|
disks.
|
|
|
|
Example:
|
|
|
|
DELETE PARTITION
|
|
.
|
|
Language=Romanian
|
|
Deletes the partition with focus.
|
|
|
|
Syntax: DELETE PARTITION [NOERR] [OVERRIDE]
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
OVERRIDE Enables DiskPart to delete any partition regardless of type.
|
|
Typically, DiskPart only permits you to delete known data
|
|
partitions.
|
|
|
|
You cannot delete the system partition, boot partition, or any partition
|
|
that contains the active paging file or crash dump (memory dump) filed.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Partitions cannot be deleted from dynamic disks or created on dynamic
|
|
disks.
|
|
|
|
Example:
|
|
|
|
DELETE PARTITION
|
|
.
|
|
Language=Russian
|
|
Deletes the partition with focus.
|
|
|
|
Syntax: DELETE PARTITION [NOERR] [OVERRIDE]
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
OVERRIDE Enables DiskPart to delete any partition regardless of type.
|
|
Typically, DiskPart only permits you to delete known data
|
|
partitions.
|
|
|
|
You cannot delete the system partition, boot partition, or any partition
|
|
that contains the active paging file or crash dump (memory dump) filed.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Partitions cannot be deleted from dynamic disks or created on dynamic
|
|
disks.
|
|
|
|
Example:
|
|
|
|
DELETE PARTITION
|
|
.
|
|
Language=Albanian
|
|
Deletes the partition with focus.
|
|
|
|
Syntax: DELETE PARTITION [NOERR] [OVERRIDE]
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
OVERRIDE Enables DiskPart to delete any partition regardless of type.
|
|
Typically, DiskPart only permits you to delete known data
|
|
partitions.
|
|
|
|
You cannot delete the system partition, boot partition, or any partition
|
|
that contains the active paging file or crash dump (memory dump) filed.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Partitions cannot be deleted from dynamic disks or created on dynamic
|
|
disks.
|
|
|
|
Example:
|
|
|
|
DELETE PARTITION
|
|
.
|
|
Language=Turkish
|
|
Deletes the partition with focus.
|
|
|
|
Syntax: DELETE PARTITION [NOERR] [OVERRIDE]
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
OVERRIDE Enables DiskPart to delete any partition regardless of type.
|
|
Typically, DiskPart only permits you to delete known data
|
|
partitions.
|
|
|
|
You cannot delete the system partition, boot partition, or any partition
|
|
that contains the active paging file or crash dump (memory dump) filed.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Partitions cannot be deleted from dynamic disks or created on dynamic
|
|
disks.
|
|
|
|
Example:
|
|
|
|
DELETE PARTITION
|
|
.
|
|
Language=Chinese
|
|
Deletes the partition with focus.
|
|
|
|
Syntax: DELETE PARTITION [NOERR] [OVERRIDE]
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
OVERRIDE Enables DiskPart to delete any partition regardless of type.
|
|
Typically, DiskPart only permits you to delete known data
|
|
partitions.
|
|
|
|
You cannot delete the system partition, boot partition, or any partition
|
|
that contains the active paging file or crash dump (memory dump) filed.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Partitions cannot be deleted from dynamic disks or created on dynamic
|
|
disks.
|
|
|
|
Example:
|
|
|
|
DELETE PARTITION
|
|
.
|
|
Language=Taiwanese
|
|
Deletes the partition with focus.
|
|
|
|
Syntax: DELETE PARTITION [NOERR] [OVERRIDE]
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
OVERRIDE Enables DiskPart to delete any partition regardless of type.
|
|
Typically, DiskPart only permits you to delete known data
|
|
partitions.
|
|
|
|
You cannot delete the system partition, boot partition, or any partition
|
|
that contains the active paging file or crash dump (memory dump) filed.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Partitions cannot be deleted from dynamic disks or created on dynamic
|
|
disks.
|
|
|
|
Example:
|
|
|
|
DELETE PARTITION
|
|
.
|
|
|
|
|
|
MessageId=10018
|
|
SymbolicName=MSG_COMMAND_DELETE_VOLUME
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add DELETE VOLUME command help text here>
|
|
.
|
|
Language=German
|
|
<Add DELETE VOLUME command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add DELETE VOLUME command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add DELETE VOLUME command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add DELETE VOLUME command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add DELETE VOLUME command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add DELETE VOLUME command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add DELETE VOLUME command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add DELETE VOLUME command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add DELETE VOLUME command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10019
|
|
SymbolicName=MSG_COMMAND_DETAIL_DISK
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Displays the properties of the selected disk and the list of volumes on
|
|
the disk.
|
|
|
|
Syntax: DETAIL DISK
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL DISK
|
|
.
|
|
Language=German
|
|
Zeigt die Eigenschaften des ausgewählten Datenträgers und die Liste der
|
|
Volumes auf dem Datenträger an.
|
|
|
|
Syntax: DETAIL DISK
|
|
|
|
Damit dieser Vorgang erfolgreich ausgeführt werden kann, muss ein
|
|
Datenträger ausgewählt sein.
|
|
|
|
Beispiel:
|
|
|
|
DETAIL DISK
|
|
.
|
|
Language=Polish
|
|
Displays the properties of the selected disk and the list of volumes on
|
|
the disk.
|
|
|
|
Syntax: DETAIL DISK
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL DISK
|
|
.
|
|
Language=Portugese
|
|
Displays the properties of the selected disk and the list of volumes on
|
|
the disk.
|
|
|
|
Syntax: DETAIL DISK
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL DISK
|
|
.
|
|
Language=Romanian
|
|
Displays the properties of the selected disk and the list of volumes on
|
|
the disk.
|
|
|
|
Syntax: DETAIL DISK
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL DISK
|
|
.
|
|
Language=Russian
|
|
Displays the properties of the selected disk and the list of volumes on
|
|
the disk.
|
|
|
|
Syntax: DETAIL DISK
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL DISK
|
|
.
|
|
Language=Albanian
|
|
Displays the properties of the selected disk and the list of volumes on
|
|
the disk.
|
|
|
|
Syntax: DETAIL DISK
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL DISK
|
|
.
|
|
Language=Turkish
|
|
Displays the properties of the selected disk and the list of volumes on
|
|
the disk.
|
|
|
|
Syntax: DETAIL DISK
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL DISK
|
|
.
|
|
Language=Chinese
|
|
Displays the properties of the selected disk and the list of volumes on
|
|
the disk.
|
|
|
|
Syntax: DETAIL DISK
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL DISK
|
|
.
|
|
Language=Taiwanese
|
|
Displays the properties of the selected disk and the list of volumes on
|
|
the disk.
|
|
|
|
Syntax: DETAIL DISK
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL DISK
|
|
.
|
|
|
|
MessageId=10020
|
|
SymbolicName=MSG_COMMAND_DETAIL_PARTITION
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Displays the properties for the selected partition.
|
|
|
|
Syntax: DETAIL PARTITION
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL PARTITION
|
|
.
|
|
Language=German
|
|
Zeigt die Eigenschaften für die ausgewählte Partition an.
|
|
|
|
Syntax: DETAIL PARTITION
|
|
|
|
Damit dieser Vorgang erfolgreich ausgeführt werden kann, muss eine
|
|
Partition ausgewählt sein.
|
|
|
|
Beispiel:
|
|
|
|
DETAIL PARTITION
|
|
.
|
|
Language=Polish
|
|
Displays the properties for the selected partition.
|
|
|
|
Syntax: DETAIL PARTITION
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL PARTITION
|
|
.
|
|
Language=Portugese
|
|
Displays the properties for the selected partition.
|
|
|
|
Syntax: DETAIL PARTITION
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL PARTITION
|
|
.
|
|
Language=Romanian
|
|
Displays the properties for the selected partition.
|
|
|
|
Syntax: DETAIL PARTITION
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL PARTITION
|
|
.
|
|
Language=Russian
|
|
Displays the properties for the selected partition.
|
|
|
|
Syntax: DETAIL PARTITION
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL PARTITION
|
|
.
|
|
Language=Albanian
|
|
Displays the properties for the selected partition.
|
|
|
|
Syntax: DETAIL PARTITION
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL PARTITION
|
|
.
|
|
Language=Turkish
|
|
Displays the properties for the selected partition.
|
|
|
|
Syntax: DETAIL PARTITION
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL PARTITION
|
|
.
|
|
Language=Chinese
|
|
Displays the properties for the selected partition.
|
|
|
|
Syntax: DETAIL PARTITION
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL PARTITION
|
|
.
|
|
Language=Taiwanese
|
|
Displays the properties for the selected partition.
|
|
|
|
Syntax: DETAIL PARTITION
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL PARTITION
|
|
.
|
|
|
|
MessageId=10021
|
|
SymbolicName=MSG_COMMAND_DETAIL_VOLUME
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Displays the properties for the selected volume and the list of disks on
|
|
which the volume resides.
|
|
|
|
Syntax: DETAIL VOLUME
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL VOLUME
|
|
.
|
|
Language=German
|
|
Zeigt die Eigenschaften für das ausgewählte Volume und die Liste der
|
|
Datenträger, die sich auf dem Volume befinden, an.
|
|
|
|
Syntax: DETAIL VOLUME
|
|
|
|
Damit dieser Vorgang erfolgreich ausgeführt werden kann, muss ein Volume
|
|
ausgewählt sein.
|
|
|
|
Beispiel:
|
|
|
|
DETAIL VOLUME
|
|
.
|
|
Language=Polish
|
|
Displays the properties for the selected volume and the list of disks on
|
|
which the volume resides.
|
|
|
|
Syntax: DETAIL VOLUME
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL VOLUME
|
|
.
|
|
Language=Portugese
|
|
Displays the properties for the selected volume and the list of disks on
|
|
which the volume resides.
|
|
|
|
Syntax: DETAIL VOLUME
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL VOLUME
|
|
.
|
|
Language=Romanian
|
|
Displays the properties for the selected volume and the list of disks on
|
|
which the volume resides.
|
|
|
|
Syntax: DETAIL VOLUME
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL VOLUME
|
|
.
|
|
Language=Russian
|
|
Displays the properties for the selected volume and the list of disks on
|
|
which the volume resides.
|
|
|
|
Syntax: DETAIL VOLUME
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL VOLUME
|
|
.
|
|
Language=Albanian
|
|
Displays the properties for the selected volume and the list of disks on
|
|
which the volume resides.
|
|
|
|
Syntax: DETAIL VOLUME
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL VOLUME
|
|
.
|
|
Language=Turkish
|
|
Displays the properties for the selected volume and the list of disks on
|
|
which the volume resides.
|
|
|
|
Syntax: DETAIL VOLUME
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL VOLUME
|
|
.
|
|
Language=Chinese
|
|
Displays the properties for the selected volume and the list of disks on
|
|
which the volume resides.
|
|
|
|
Syntax: DETAIL VOLUME
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL VOLUME
|
|
.
|
|
Language=Taiwanese
|
|
Displays the properties for the selected volume and the list of disks on
|
|
which the volume resides.
|
|
|
|
Syntax: DETAIL VOLUME
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
DETAIL VOLUME
|
|
.
|
|
|
|
|
|
MessageId=10022
|
|
SymbolicName=MSG_COMMAND_DETACH
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add DETACH command help text here>
|
|
.
|
|
Language=German
|
|
<Add DETACH command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add DETACH command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add DETACH command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add DETACH command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add DETACH command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add DETACH command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add DETACH command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add DETACH command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add DETACH command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10023
|
|
SymbolicName=MSG_COMMAND_EXIT
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Exits the DiskPart command interpreter.
|
|
|
|
Syntax: EXIT
|
|
|
|
Example:
|
|
|
|
EXIT
|
|
.
|
|
Language=German
|
|
Beendet den Befehlsinterpreter DiskPart.
|
|
|
|
Syntax: EXIT
|
|
|
|
Beispiel:
|
|
|
|
EXIT
|
|
.
|
|
Language=Polish
|
|
Exits the DiskPart command interpreter.
|
|
|
|
Syntax: EXIT
|
|
|
|
Example:
|
|
|
|
EXIT
|
|
.
|
|
Language=Portugese
|
|
Exits the DiskPart command interpreter.
|
|
|
|
Syntax: EXIT
|
|
|
|
Example:
|
|
|
|
EXIT
|
|
.
|
|
Language=Romanian
|
|
Exits the DiskPart command interpreter.
|
|
|
|
Syntax: EXIT
|
|
|
|
Example:
|
|
|
|
EXIT
|
|
.
|
|
Language=Russian
|
|
Exits the DiskPart command interpreter.
|
|
|
|
Syntax: EXIT
|
|
|
|
Example:
|
|
|
|
EXIT
|
|
.
|
|
Language=Albanian
|
|
Exits the DiskPart command interpreter.
|
|
|
|
Syntax: EXIT
|
|
|
|
Example:
|
|
|
|
EXIT
|
|
.
|
|
Language=Turkish
|
|
Exits the DiskPart command interpreter.
|
|
|
|
Syntax: EXIT
|
|
|
|
Example:
|
|
|
|
EXIT
|
|
.
|
|
Language=Chinese
|
|
Exits the DiskPart command interpreter.
|
|
|
|
Syntax: EXIT
|
|
|
|
Example:
|
|
|
|
EXIT
|
|
.
|
|
Language=Taiwanese
|
|
Exits the DiskPart command interpreter.
|
|
|
|
Syntax: EXIT
|
|
|
|
Example:
|
|
|
|
EXIT
|
|
.
|
|
|
|
|
|
MessageId=10024
|
|
SymbolicName=MSG_COMMAND_EXPAND
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add EXPAND command help text here>
|
|
.
|
|
Language=German
|
|
<Add EXPAND command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add EXPAND command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add EXPAND command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add EXPAND command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add EXPAND command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add EXPAND command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add EXPAND command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add EXPAND command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add EXPAND command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10025
|
|
SymbolicName=MSG_COMMAND_EXTEND
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add EXTEND command help text here>
|
|
.
|
|
Language=German
|
|
<Add EXTEND command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add EXTEND command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add EXTEND command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add EXTEND command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add EXTEND command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add EXTEND command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add EXTEND command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add EXTEND command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add EXTEND command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10026
|
|
SymbolicName=MSG_COMMAND_FILESYSTEMS
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Displays information about the current file system for the selected
|
|
volume, and the supported file systems for formatting the volume.
|
|
|
|
Syntax: FILESYSTEMS
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
FILESYSTEMS
|
|
.
|
|
Language=German
|
|
Zeigt Informationen zum aktuelle Dateisystem für das ausgewählte
|
|
Volume und die unterstützten Dateisysteme zum Formatieren des
|
|
Volumes an.
|
|
|
|
Syntax: FILESYSTEMS
|
|
|
|
Damit diesr Vorgang erfolgreich ausgeführt werden kann, muss ein
|
|
Volume ausgewählt sein.
|
|
|
|
Beispiel:
|
|
|
|
FILESYSTEMS
|
|
.
|
|
Language=Polish
|
|
Displays information about the current file system for the selected
|
|
volume, and the supported file systems for formatting the volume.
|
|
|
|
Syntax: FILESYSTEMS
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
FILESYSTEMS
|
|
.
|
|
Language=Portugese
|
|
Displays information about the current file system for the selected
|
|
volume, and the supported file systems for formatting the volume.
|
|
|
|
Syntax: FILESYSTEMS
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
FILESYSTEMS
|
|
.
|
|
Language=Romanian
|
|
Displays information about the current file system for the selected
|
|
volume, and the supported file systems for formatting the volume.
|
|
|
|
Syntax: FILESYSTEMS
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
FILESYSTEMS
|
|
.
|
|
Language=Russian
|
|
Displays information about the current file system for the selected
|
|
volume, and the supported file systems for formatting the volume.
|
|
|
|
Syntax: FILESYSTEMS
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
FILESYSTEMS
|
|
.
|
|
Language=Albanian
|
|
Displays information about the current file system for the selected
|
|
volume, and the supported file systems for formatting the volume.
|
|
|
|
Syntax: FILESYSTEMS
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
FILESYSTEMS
|
|
.
|
|
Language=Turkish
|
|
Displays information about the current file system for the selected
|
|
volume, and the supported file systems for formatting the volume.
|
|
|
|
Syntax: FILESYSTEMS
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
FILESYSTEMS
|
|
.
|
|
Language=Chinese
|
|
Displays information about the current file system for the selected
|
|
volume, and the supported file systems for formatting the volume.
|
|
|
|
Syntax: FILESYSTEMS
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
FILESYSTEMS
|
|
.
|
|
Language=Taiwanese
|
|
Displays information about the current file system for the selected
|
|
volume, and the supported file systems for formatting the volume.
|
|
|
|
Syntax: FILESYSTEMS
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
FILESYSTEMS
|
|
.
|
|
|
|
|
|
MessageId=10027
|
|
SymbolicName=MSG_COMMAND_FORMAT
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Formats the specified volume for use with ReactOS.
|
|
|
|
Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">]
|
|
[UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
|
|
[NOERR]
|
|
|
|
FS=<FS> Specifies the type of file system. If no file system is given,
|
|
the default file system displayed by the FILESYSTEMS command is
|
|
used.
|
|
|
|
REVISION=<X.XX>
|
|
|
|
Specifies the file system revision (if applicable).
|
|
|
|
RECOMMENDED If specified, use the recommended file system and revision
|
|
instead of the default if a recommendation exists. The
|
|
recommended file system (if one exists) is displayed by the
|
|
FILESYSTEMS command.
|
|
|
|
LABEL=<"label">
|
|
|
|
Specifies the volume label.
|
|
|
|
UNIT=<N> Overrides the default allocation unit size. Default settings
|
|
are strongly recommended for general use. The default
|
|
allocation unit size for a particular file system is displayed
|
|
by the FILESYSTEMS command.
|
|
|
|
NTFS compression is not supported for allocation unit sizes
|
|
above 4096.
|
|
|
|
QUICK Performs a quick format.
|
|
|
|
COMPRESS NTFS only: Files created on the new volume will be compressed
|
|
by default.
|
|
|
|
OVERRIDE Forces the file system to dismount first if necessary. All
|
|
opened handles to the volume would no longer be valid.
|
|
|
|
DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
|
|
higher.
|
|
This flag instructs the format operation to duplicate the file
|
|
system meta-data to a second set of sectors on the disk. The
|
|
duplicate meta-data is used by applications, for example repair
|
|
or recovery applications. If the primary meta-data sectors are
|
|
found to be corrupted, the file system meta-data will be read
|
|
from the duplicate sectors.
|
|
|
|
NOWAIT Forces the command to return immediately while the format
|
|
process is still in progress. If NOWAIT is not specified,
|
|
DiskPart will display format progress in percentage.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Examples:
|
|
|
|
FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
|
|
FORMAT RECOMMENDED OVERRIDE
|
|
.
|
|
Language=German
|
|
Formatiert das angegebene Volume für die Verwendung mit ReactOS.
|
|
|
|
Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">]
|
|
[UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
|
|
[NOERR]
|
|
|
|
FS=<FS> Gibt den Typ des Dateisystems an. Falls kein Dateisystem
|
|
angegeben wurde, wird das durch den Befehl
|
|
"FILESYSTEMS" angezeigte Standarddateisystem
|
|
verwendet.
|
|
|
|
REVISION=<X.XX>
|
|
|
|
Gibt die Dateisystemversion an (sofern zutreffend).
|
|
|
|
RECOMMENDED Sofern angegeben, werden anstelle der Standardein-
|
|
stellung das empfohlene Dateisystem und die Version verwendet,
|
|
falls eine Empfehlung vorhanden ist. Das empfohlene Dateisystem
|
|
(sofern vorhanden) wird durch den Befehl "FILESYSTEMS"
|
|
angezeigt.
|
|
|
|
LABEL=<"label">
|
|
Gibt die Volumebezeichnung an.
|
|
|
|
UNIT=<N> Überschreibt die standardmäßige Größe der
|
|
Zuteilungseinheit. Für die allgemeine Verwendung
|
|
werden dringend die Standardeinstellungen
|
|
empfohlen.
|
|
Die standardmäßige Größe der Zuteilungseinheit
|
|
für ein bestimmtes Dateisystem wird durch den
|
|
Befehl "FILESYSTEMS" angezeigt.
|
|
|
|
NTFS-Komprimierung wird für Zuteilungseinheitsgrößen
|
|
über 4096 nicht unterstützt.
|
|
|
|
QUICK Führt eine Schnellformatierung aus.
|
|
|
|
COMPRESS nur NTFS: Auf dem neuen Volume erstellte Dateien
|
|
werden standardmäßig komprimiert.
|
|
|
|
OVERRIDE Erzwingt ggf. die Aufhebung der Bereitstellung des
|
|
Dateisystems als ersten Schritt. Alle geöffneten Handles für
|
|
das Volume besäßen keine Gültigkeit mehr.
|
|
|
|
DUPLICATE nur UDF: Dieses Kennzeichen gilt für das UDF-Format,
|
|
Version 2.5 oder höher. Durch dieses Kennzeichen wird der
|
|
Formatvorgang angewiesen, die Dateisystem-Metadaten
|
|
auf einem zweiten Sektorensatz auf dem Datenträger zu
|
|
duplizieren. Die duplizierten Metadaten werden von
|
|
Anwendungen verwendet, beispielsweise für Reparatur-
|
|
oder Wiederherstellungsanwendungen.
|
|
Wird festgestellt, dass primäre Metadatensektoren beschädigt
|
|
sind, werden die Dateisystem-Metadaten aus den doppelten
|
|
Sektoren gelesen.
|
|
|
|
NOWAIT Erzwingt die sofortige Rückgabe des Befehls, während der
|
|
Formatierungsprozess noch stattfindet. Falls "NOWAIT" nicht
|
|
angegeben wurde, wird der Fortschritt des Formatierungs-
|
|
vorgangs von DiskPart in Prozent angezeigt.
|
|
|
|
NOERR Nur für Skripting. Wird ein Fehler festgestellt, werden
|
|
Befehle weiterhin so verarbeitet, als wäre der Fehler
|
|
nicht aufgetreten. Ohne den Parameter "NOERR"
|
|
wird DiskPart aufgrund eines Fehlers mit einem
|
|
Fehlercode beendet.
|
|
|
|
Damit dieser Vorgang erfolgreich ist, muss ein Volume ausgewählt werden.
|
|
|
|
Beispiele:
|
|
|
|
FORMAT FS=NTFS LABEL="Neues Volume" QUICK COMPRESS
|
|
FORMAT RECOMMENDED OVERRIDE
|
|
.
|
|
Language=Polish
|
|
Formats the specified volume for use with ReactOS.
|
|
|
|
Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">]
|
|
[UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
|
|
[NOERR]
|
|
|
|
FS=<FS> Specifies the type of file system. If no file system is given,
|
|
the default file system displayed by the FILESYSTEMS command is
|
|
used.
|
|
|
|
REVISION=<X.XX>
|
|
|
|
Specifies the file system revision (if applicable).
|
|
|
|
RECOMMENDED If specified, use the recommended file system and revision
|
|
instead of the default if a recommendation exists. The
|
|
recommended file system (if one exists) is displayed by the
|
|
FILESYSTEMS command.
|
|
|
|
LABEL=<"label">
|
|
|
|
Specifies the volume label.
|
|
|
|
UNIT=<N> Overrides the default allocation unit size. Default settings
|
|
are strongly recommended for general use. The default
|
|
allocation unit size for a particular file system is displayed
|
|
by the FILESYSTEMS command.
|
|
|
|
NTFS compression is not supported for allocation unit sizes
|
|
above 4096.
|
|
|
|
QUICK Performs a quick format.
|
|
|
|
COMPRESS NTFS only: Files created on the new volume will be compressed
|
|
by default.
|
|
|
|
OVERRIDE Forces the file system to dismount first if necessary. All
|
|
opened handles to the volume would no longer be valid.
|
|
|
|
DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
|
|
higher.
|
|
This flag instructs the format operation to duplicate the file
|
|
system meta-data to a second set of sectors on the disk. The
|
|
duplicate meta-data is used by applications, for example repair
|
|
or recovery applications. If the primary meta-data sectors are
|
|
found to be corrupted, the file system meta-data will be read
|
|
from the duplicate sectors.
|
|
|
|
NOWAIT Forces the command to return immediately while the format
|
|
process is still in progress. If NOWAIT is not specified,
|
|
DiskPart will display format progress in percentage.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Examples:
|
|
|
|
FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
|
|
FORMAT RECOMMENDED OVERRIDE
|
|
.
|
|
Language=Portugese
|
|
Formats the specified volume for use with ReactOS.
|
|
|
|
Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">]
|
|
[UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
|
|
[NOERR]
|
|
|
|
FS=<FS> Specifies the type of file system. If no file system is given,
|
|
the default file system displayed by the FILESYSTEMS command is
|
|
used.
|
|
|
|
REVISION=<X.XX>
|
|
|
|
Specifies the file system revision (if applicable).
|
|
|
|
RECOMMENDED If specified, use the recommended file system and revision
|
|
instead of the default if a recommendation exists. The
|
|
recommended file system (if one exists) is displayed by the
|
|
FILESYSTEMS command.
|
|
|
|
LABEL=<"label">
|
|
|
|
Specifies the volume label.
|
|
|
|
UNIT=<N> Overrides the default allocation unit size. Default settings
|
|
are strongly recommended for general use. The default
|
|
allocation unit size for a particular file system is displayed
|
|
by the FILESYSTEMS command.
|
|
|
|
NTFS compression is not supported for allocation unit sizes
|
|
above 4096.
|
|
|
|
QUICK Performs a quick format.
|
|
|
|
COMPRESS NTFS only: Files created on the new volume will be compressed
|
|
by default.
|
|
|
|
OVERRIDE Forces the file system to dismount first if necessary. All
|
|
opened handles to the volume would no longer be valid.
|
|
|
|
DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
|
|
higher.
|
|
This flag instructs the format operation to duplicate the file
|
|
system meta-data to a second set of sectors on the disk. The
|
|
duplicate meta-data is used by applications, for example repair
|
|
or recovery applications. If the primary meta-data sectors are
|
|
found to be corrupted, the file system meta-data will be read
|
|
from the duplicate sectors.
|
|
|
|
NOWAIT Forces the command to return immediately while the format
|
|
process is still in progress. If NOWAIT is not specified,
|
|
DiskPart will display format progress in percentage.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Examples:
|
|
|
|
FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
|
|
FORMAT RECOMMENDED OVERRIDE
|
|
.
|
|
Language=Romanian
|
|
Formats the specified volume for use with ReactOS.
|
|
|
|
Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">]
|
|
[UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
|
|
[NOERR]
|
|
|
|
FS=<FS> Specifies the type of file system. If no file system is given,
|
|
the default file system displayed by the FILESYSTEMS command is
|
|
used.
|
|
|
|
REVISION=<X.XX>
|
|
|
|
Specifies the file system revision (if applicable).
|
|
|
|
RECOMMENDED If specified, use the recommended file system and revision
|
|
instead of the default if a recommendation exists. The
|
|
recommended file system (if one exists) is displayed by the
|
|
FILESYSTEMS command.
|
|
|
|
LABEL=<"label">
|
|
|
|
Specifies the volume label.
|
|
|
|
UNIT=<N> Overrides the default allocation unit size. Default settings
|
|
are strongly recommended for general use. The default
|
|
allocation unit size for a particular file system is displayed
|
|
by the FILESYSTEMS command.
|
|
|
|
NTFS compression is not supported for allocation unit sizes
|
|
above 4096.
|
|
|
|
QUICK Performs a quick format.
|
|
|
|
COMPRESS NTFS only: Files created on the new volume will be compressed
|
|
by default.
|
|
|
|
OVERRIDE Forces the file system to dismount first if necessary. All
|
|
opened handles to the volume would no longer be valid.
|
|
|
|
DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
|
|
higher.
|
|
This flag instructs the format operation to duplicate the file
|
|
system meta-data to a second set of sectors on the disk. The
|
|
duplicate meta-data is used by applications, for example repair
|
|
or recovery applications. If the primary meta-data sectors are
|
|
found to be corrupted, the file system meta-data will be read
|
|
from the duplicate sectors.
|
|
|
|
NOWAIT Forces the command to return immediately while the format
|
|
process is still in progress. If NOWAIT is not specified,
|
|
DiskPart will display format progress in percentage.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Examples:
|
|
|
|
FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
|
|
FORMAT RECOMMENDED OVERRIDE
|
|
.
|
|
Language=Russian
|
|
Formats the specified volume for use with ReactOS.
|
|
|
|
Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">]
|
|
[UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
|
|
[NOERR]
|
|
|
|
FS=<FS> Specifies the type of file system. If no file system is given,
|
|
the default file system displayed by the FILESYSTEMS command is
|
|
used.
|
|
|
|
REVISION=<X.XX>
|
|
|
|
Specifies the file system revision (if applicable).
|
|
|
|
RECOMMENDED If specified, use the recommended file system and revision
|
|
instead of the default if a recommendation exists. The
|
|
recommended file system (if one exists) is displayed by the
|
|
FILESYSTEMS command.
|
|
|
|
LABEL=<"label">
|
|
|
|
Specifies the volume label.
|
|
|
|
UNIT=<N> Overrides the default allocation unit size. Default settings
|
|
are strongly recommended for general use. The default
|
|
allocation unit size for a particular file system is displayed
|
|
by the FILESYSTEMS command.
|
|
|
|
NTFS compression is not supported for allocation unit sizes
|
|
above 4096.
|
|
|
|
QUICK Performs a quick format.
|
|
|
|
COMPRESS NTFS only: Files created on the new volume will be compressed
|
|
by default.
|
|
|
|
OVERRIDE Forces the file system to dismount first if necessary. All
|
|
opened handles to the volume would no longer be valid.
|
|
|
|
DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
|
|
higher.
|
|
This flag instructs the format operation to duplicate the file
|
|
system meta-data to a second set of sectors on the disk. The
|
|
duplicate meta-data is used by applications, for example repair
|
|
or recovery applications. If the primary meta-data sectors are
|
|
found to be corrupted, the file system meta-data will be read
|
|
from the duplicate sectors.
|
|
|
|
NOWAIT Forces the command to return immediately while the format
|
|
process is still in progress. If NOWAIT is not specified,
|
|
DiskPart will display format progress in percentage.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Examples:
|
|
|
|
FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
|
|
FORMAT RECOMMENDED OVERRIDE
|
|
.
|
|
Language=Albanian
|
|
Formats the specified volume for use with ReactOS.
|
|
|
|
Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">]
|
|
[UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
|
|
[NOERR]
|
|
|
|
FS=<FS> Specifies the type of file system. If no file system is given,
|
|
the default file system displayed by the FILESYSTEMS command is
|
|
used.
|
|
|
|
REVISION=<X.XX>
|
|
|
|
Specifies the file system revision (if applicable).
|
|
|
|
RECOMMENDED If specified, use the recommended file system and revision
|
|
instead of the default if a recommendation exists. The
|
|
recommended file system (if one exists) is displayed by the
|
|
FILESYSTEMS command.
|
|
|
|
LABEL=<"label">
|
|
|
|
Specifies the volume label.
|
|
|
|
UNIT=<N> Overrides the default allocation unit size. Default settings
|
|
are strongly recommended for general use. The default
|
|
allocation unit size for a particular file system is displayed
|
|
by the FILESYSTEMS command.
|
|
|
|
NTFS compression is not supported for allocation unit sizes
|
|
above 4096.
|
|
|
|
QUICK Performs a quick format.
|
|
|
|
COMPRESS NTFS only: Files created on the new volume will be compressed
|
|
by default.
|
|
|
|
OVERRIDE Forces the file system to dismount first if necessary. All
|
|
opened handles to the volume would no longer be valid.
|
|
|
|
DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
|
|
higher.
|
|
This flag instructs the format operation to duplicate the file
|
|
system meta-data to a second set of sectors on the disk. The
|
|
duplicate meta-data is used by applications, for example repair
|
|
or recovery applications. If the primary meta-data sectors are
|
|
found to be corrupted, the file system meta-data will be read
|
|
from the duplicate sectors.
|
|
|
|
NOWAIT Forces the command to return immediately while the format
|
|
process is still in progress. If NOWAIT is not specified,
|
|
DiskPart will display format progress in percentage.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Examples:
|
|
|
|
FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
|
|
FORMAT RECOMMENDED OVERRIDE
|
|
.
|
|
Language=Turkish
|
|
Formats the specified volume for use with ReactOS.
|
|
|
|
Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">]
|
|
[UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
|
|
[NOERR]
|
|
|
|
FS=<FS> Specifies the type of file system. If no file system is given,
|
|
the default file system displayed by the FILESYSTEMS command is
|
|
used.
|
|
|
|
REVISION=<X.XX>
|
|
|
|
Specifies the file system revision (if applicable).
|
|
|
|
RECOMMENDED If specified, use the recommended file system and revision
|
|
instead of the default if a recommendation exists. The
|
|
recommended file system (if one exists) is displayed by the
|
|
FILESYSTEMS command.
|
|
|
|
LABEL=<"label">
|
|
|
|
Specifies the volume label.
|
|
|
|
UNIT=<N> Overrides the default allocation unit size. Default settings
|
|
are strongly recommended for general use. The default
|
|
allocation unit size for a particular file system is displayed
|
|
by the FILESYSTEMS command.
|
|
|
|
NTFS compression is not supported for allocation unit sizes
|
|
above 4096.
|
|
|
|
QUICK Performs a quick format.
|
|
|
|
COMPRESS NTFS only: Files created on the new volume will be compressed
|
|
by default.
|
|
|
|
OVERRIDE Forces the file system to dismount first if necessary. All
|
|
opened handles to the volume would no longer be valid.
|
|
|
|
DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
|
|
higher.
|
|
This flag instructs the format operation to duplicate the file
|
|
system meta-data to a second set of sectors on the disk. The
|
|
duplicate meta-data is used by applications, for example repair
|
|
or recovery applications. If the primary meta-data sectors are
|
|
found to be corrupted, the file system meta-data will be read
|
|
from the duplicate sectors.
|
|
|
|
NOWAIT Forces the command to return immediately while the format
|
|
process is still in progress. If NOWAIT is not specified,
|
|
DiskPart will display format progress in percentage.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Examples:
|
|
|
|
FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
|
|
FORMAT RECOMMENDED OVERRIDE
|
|
.
|
|
Language=Chinese
|
|
Formats the specified volume for use with ReactOS.
|
|
|
|
Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">]
|
|
[UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
|
|
[NOERR]
|
|
|
|
FS=<FS> Specifies the type of file system. If no file system is given,
|
|
the default file system displayed by the FILESYSTEMS command is
|
|
used.
|
|
|
|
REVISION=<X.XX>
|
|
|
|
Specifies the file system revision (if applicable).
|
|
|
|
RECOMMENDED If specified, use the recommended file system and revision
|
|
instead of the default if a recommendation exists. The
|
|
recommended file system (if one exists) is displayed by the
|
|
FILESYSTEMS command.
|
|
|
|
LABEL=<"label">
|
|
|
|
Specifies the volume label.
|
|
|
|
UNIT=<N> Overrides the default allocation unit size. Default settings
|
|
are strongly recommended for general use. The default
|
|
allocation unit size for a particular file system is displayed
|
|
by the FILESYSTEMS command.
|
|
|
|
NTFS compression is not supported for allocation unit sizes
|
|
above 4096.
|
|
|
|
QUICK Performs a quick format.
|
|
|
|
COMPRESS NTFS only: Files created on the new volume will be compressed
|
|
by default.
|
|
|
|
OVERRIDE Forces the file system to dismount first if necessary. All
|
|
opened handles to the volume would no longer be valid.
|
|
|
|
DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
|
|
higher.
|
|
This flag instructs the format operation to duplicate the file
|
|
system meta-data to a second set of sectors on the disk. The
|
|
duplicate meta-data is used by applications, for example repair
|
|
or recovery applications. If the primary meta-data sectors are
|
|
found to be corrupted, the file system meta-data will be read
|
|
from the duplicate sectors.
|
|
|
|
NOWAIT Forces the command to return immediately while the format
|
|
process is still in progress. If NOWAIT is not specified,
|
|
DiskPart will display format progress in percentage.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Examples:
|
|
|
|
FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
|
|
FORMAT RECOMMENDED OVERRIDE
|
|
.
|
|
Language=Taiwanese
|
|
Formats the specified volume for use with ReactOS.
|
|
|
|
Syntax: FORMAT [[FS=<FS>] [REVISION=<X.XX>] | RECOMMENDED] [LABEL=<"label">]
|
|
[UNIT=<N>] [QUICK] [COMPRESS] [OVERRIDE] [DUPLICATE] [NOWAIT]
|
|
[NOERR]
|
|
|
|
FS=<FS> Specifies the type of file system. If no file system is given,
|
|
the default file system displayed by the FILESYSTEMS command is
|
|
used.
|
|
|
|
REVISION=<X.XX>
|
|
|
|
Specifies the file system revision (if applicable).
|
|
|
|
RECOMMENDED If specified, use the recommended file system and revision
|
|
instead of the default if a recommendation exists. The
|
|
recommended file system (if one exists) is displayed by the
|
|
FILESYSTEMS command.
|
|
|
|
LABEL=<"label">
|
|
|
|
Specifies the volume label.
|
|
|
|
UNIT=<N> Overrides the default allocation unit size. Default settings
|
|
are strongly recommended for general use. The default
|
|
allocation unit size for a particular file system is displayed
|
|
by the FILESYSTEMS command.
|
|
|
|
NTFS compression is not supported for allocation unit sizes
|
|
above 4096.
|
|
|
|
QUICK Performs a quick format.
|
|
|
|
COMPRESS NTFS only: Files created on the new volume will be compressed
|
|
by default.
|
|
|
|
OVERRIDE Forces the file system to dismount first if necessary. All
|
|
opened handles to the volume would no longer be valid.
|
|
|
|
DUPLICATE UDF Only: This flag applies to UDF format, version 2.5 or
|
|
higher.
|
|
This flag instructs the format operation to duplicate the file
|
|
system meta-data to a second set of sectors on the disk. The
|
|
duplicate meta-data is used by applications, for example repair
|
|
or recovery applications. If the primary meta-data sectors are
|
|
found to be corrupted, the file system meta-data will be read
|
|
from the duplicate sectors.
|
|
|
|
NOWAIT Forces the command to return immediately while the format
|
|
process is still in progress. If NOWAIT is not specified,
|
|
DiskPart will display format progress in percentage.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A volume must be selected for this operation to succeed.
|
|
|
|
Examples:
|
|
|
|
FORMAT FS=NTFS LABEL="New Volume" QUICK COMPRESS
|
|
FORMAT RECOMMENDED OVERRIDE
|
|
.
|
|
|
|
|
|
MessageId=10028
|
|
SymbolicName=MSG_COMMAND_GPT
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add GPT command help text here>
|
|
.
|
|
Language=German
|
|
<Add GPT command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add GPT command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add GPT command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add GPT command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add GPT command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add GPT command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add GPT command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add GPT command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add GPT command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10029
|
|
SymbolicName=MSG_COMMAND_HELP
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Displays a list of the available commands or detailed help information for a
|
|
specified command.
|
|
|
|
Syntax: HELP [<COMMAND>]
|
|
|
|
<COMMAND> The command for which to display detail help.
|
|
|
|
If no command is specified, HELP will display all possible commands.
|
|
|
|
Example:
|
|
|
|
HELP
|
|
HELP CREATE PARTITION PRIMARY
|
|
.
|
|
Language=German
|
|
Zeigt eine Liste der verfügbaren Befehle oder detaillierte
|
|
Hilfeinformationen zu einem bestimmten Befehl an.
|
|
|
|
Syntax: HELP [<BEFEHL>]
|
|
|
|
<BEFEHL> Der Befehl, zu dem eine detaillierte Hilfe angezeigt
|
|
werden soll.
|
|
|
|
Wenn kein Befehl angegeben ist, werden mit HELP alle verfügbaren Befehle
|
|
angezeigt.
|
|
|
|
Beispiel:
|
|
|
|
HELP
|
|
HELP CREATE PARTITION PRIMARY
|
|
.
|
|
Language=Polish
|
|
Displays a list of the available commands or detailed help information for a
|
|
specified command.
|
|
|
|
Syntax: HELP [<COMMAND>]
|
|
|
|
<COMMAND> The command for which to display detail help.
|
|
|
|
If no command is specified, HELP will display all possible commands.
|
|
|
|
Example:
|
|
|
|
HELP
|
|
HELP CREATE PARTITION PRIMARY
|
|
.
|
|
Language=Portugese
|
|
Displays a list of the available commands or detailed help information for a
|
|
specified command.
|
|
|
|
Syntax: HELP [<COMMAND>]
|
|
|
|
<COMMAND> The command for which to display detail help.
|
|
|
|
If no command is specified, HELP will display all possible commands.
|
|
|
|
Example:
|
|
|
|
HELP
|
|
HELP CREATE PARTITION PRIMARY
|
|
.
|
|
Language=Romanian
|
|
Displays a list of the available commands or detailed help information for a
|
|
specified command.
|
|
|
|
Syntax: HELP [<COMMAND>]
|
|
|
|
<COMMAND> The command for which to display detail help.
|
|
|
|
If no command is specified, HELP will display all possible commands.
|
|
|
|
Example:
|
|
|
|
HELP
|
|
HELP CREATE PARTITION PRIMARY
|
|
.
|
|
Language=Russian
|
|
Displays a list of the available commands or detailed help information for a
|
|
specified command.
|
|
|
|
Syntax: HELP [<COMMAND>]
|
|
|
|
<COMMAND> The command for which to display detail help.
|
|
|
|
If no command is specified, HELP will display all possible commands.
|
|
|
|
Example:
|
|
|
|
HELP
|
|
HELP CREATE PARTITION PRIMARY
|
|
.
|
|
Language=Albanian
|
|
Displays a list of the available commands or detailed help information for a
|
|
specified command.
|
|
|
|
Syntax: HELP [<COMMAND>]
|
|
|
|
<COMMAND> The command for which to display detail help.
|
|
|
|
If no command is specified, HELP will display all possible commands.
|
|
|
|
Example:
|
|
|
|
HELP
|
|
HELP CREATE PARTITION PRIMARY
|
|
.
|
|
Language=Turkish
|
|
Displays a list of the available commands or detailed help information for a
|
|
specified command.
|
|
|
|
Syntax: HELP [<COMMAND>]
|
|
|
|
<COMMAND> The command for which to display detail help.
|
|
|
|
If no command is specified, HELP will display all possible commands.
|
|
|
|
Example:
|
|
|
|
HELP
|
|
HELP CREATE PARTITION PRIMARY
|
|
.
|
|
Language=Chinese
|
|
Displays a list of the available commands or detailed help information for a
|
|
specified command.
|
|
|
|
Syntax: HELP [<COMMAND>]
|
|
|
|
<COMMAND> The command for which to display detail help.
|
|
|
|
If no command is specified, HELP will display all possible commands.
|
|
|
|
Example:
|
|
|
|
HELP
|
|
HELP CREATE PARTITION PRIMARY
|
|
.
|
|
Language=Taiwanese
|
|
Displays a list of the available commands or detailed help information for a
|
|
specified command.
|
|
|
|
Syntax: HELP [<COMMAND>]
|
|
|
|
<COMMAND> The command for which to display detail help.
|
|
|
|
If no command is specified, HELP will display all possible commands.
|
|
|
|
Example:
|
|
|
|
HELP
|
|
HELP CREATE PARTITION PRIMARY
|
|
.
|
|
|
|
|
|
MessageId=10030
|
|
SymbolicName=MSG_COMMAND_IMPORT
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add IMPORT command help text here>
|
|
.
|
|
Language=German
|
|
<Add IMPORT command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add IMPORT command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add IMPORT command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add IMPORT command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add IMPORT command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add IMPORT command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add IMPORT command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add IMPORT command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add IMPORT command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10031
|
|
SymbolicName=MSG_COMMAND_INACTIVE
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as inactive.
|
|
|
|
Syntax: INACTIVE
|
|
|
|
The computer may start from the next option specified in the BIOS such as a
|
|
CD-ROM drive or a Pre-Boot eXecution Environment (PXE)-based boot
|
|
environment (such as Remote Installation Services (RIS)) when you restart
|
|
the computer.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Your computer might not start without an active partition. Do not mark
|
|
a system or boot partition as inactive unless you are an experienced
|
|
user with a thorough understanding of ReactOS storage management.
|
|
|
|
Example:
|
|
|
|
INACTIVE
|
|
.
|
|
Language=German
|
|
Markiert auf Datenträgern mit MBR-Datenträgerformat (Master Boot
|
|
Record) die Partition, die den Fokus hat, als inaktive Partition.
|
|
|
|
Syntax: INACTIVE
|
|
|
|
Der Computer kann über die nächste im BIOS angegebene Option gestartet
|
|
werden, z.B. von einem CD-ROM-Laufwerk oder aus einer PXE-basierten
|
|
(Pre-Boot eXecution Environment) Startumgebung (z.B.
|
|
Remoteinstallationsdienste, RIS), wenn der Computer neu startet.
|
|
|
|
Damit dieser Vorgang erfolgreich ausgeführt werden kann, muss eine
|
|
Partition ausgewählt sein.
|
|
|
|
Vorsicht:
|
|
|
|
Möglicherweise kann der Computer nicht gestartet werden, wenn es
|
|
keine aktive Partition gibt. Markieren Sie eine System- oder
|
|
Startpartition nur dann als inaktiv, wenn Sie ein erfahrener
|
|
Benutzer und mit der ReactOS-Speicherverwaltung umfassend vertraut
|
|
sind.
|
|
|
|
Beispiel:
|
|
|
|
INACTIVE
|
|
.
|
|
Language=Polish
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as inactive.
|
|
|
|
Syntax: INACTIVE
|
|
|
|
The computer may start from the next option specified in the BIOS such as a
|
|
CD-ROM drive or a Pre-Boot eXecution Environment (PXE)-based boot
|
|
environment (such as Remote Installation Services (RIS)) when you restart
|
|
the computer.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Your computer might not start without an active partition. Do not mark
|
|
a system or boot partition as inactive unless you are an experienced
|
|
user with a thorough understanding of ReactOS storage management.
|
|
|
|
Example:
|
|
|
|
INACTIVE
|
|
.
|
|
Language=Portugese
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as inactive.
|
|
|
|
Syntax: INACTIVE
|
|
|
|
The computer may start from the next option specified in the BIOS such as a
|
|
CD-ROM drive or a Pre-Boot eXecution Environment (PXE)-based boot
|
|
environment (such as Remote Installation Services (RIS)) when you restart
|
|
the computer.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Your computer might not start without an active partition. Do not mark
|
|
a system or boot partition as inactive unless you are an experienced
|
|
user with a thorough understanding of ReactOS storage management.
|
|
|
|
Example:
|
|
|
|
INACTIVE
|
|
.
|
|
Language=Romanian
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as inactive.
|
|
|
|
Syntax: INACTIVE
|
|
|
|
The computer may start from the next option specified in the BIOS such as a
|
|
CD-ROM drive or a Pre-Boot eXecution Environment (PXE)-based boot
|
|
environment (such as Remote Installation Services (RIS)) when you restart
|
|
the computer.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Your computer might not start without an active partition. Do not mark
|
|
a system or boot partition as inactive unless you are an experienced
|
|
user with a thorough understanding of ReactOS storage management.
|
|
|
|
Example:
|
|
|
|
INACTIVE
|
|
.
|
|
Language=Russian
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as inactive.
|
|
|
|
Syntax: INACTIVE
|
|
|
|
The computer may start from the next option specified in the BIOS such as a
|
|
CD-ROM drive or a Pre-Boot eXecution Environment (PXE)-based boot
|
|
environment (such as Remote Installation Services (RIS)) when you restart
|
|
the computer.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Your computer might not start without an active partition. Do not mark
|
|
a system or boot partition as inactive unless you are an experienced
|
|
user with a thorough understanding of ReactOS storage management.
|
|
|
|
Example:
|
|
|
|
INACTIVE
|
|
.
|
|
Language=Albanian
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as inactive.
|
|
|
|
Syntax: INACTIVE
|
|
|
|
The computer may start from the next option specified in the BIOS such as a
|
|
CD-ROM drive or a Pre-Boot eXecution Environment (PXE)-based boot
|
|
environment (such as Remote Installation Services (RIS)) when you restart
|
|
the computer.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Your computer might not start without an active partition. Do not mark
|
|
a system or boot partition as inactive unless you are an experienced
|
|
user with a thorough understanding of ReactOS storage management.
|
|
|
|
Example:
|
|
|
|
INACTIVE
|
|
.
|
|
Language=Turkish
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as inactive.
|
|
|
|
Syntax: INACTIVE
|
|
|
|
The computer may start from the next option specified in the BIOS such as a
|
|
CD-ROM drive or a Pre-Boot eXecution Environment (PXE)-based boot
|
|
environment (such as Remote Installation Services (RIS)) when you restart
|
|
the computer.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Your computer might not start without an active partition. Do not mark
|
|
a system or boot partition as inactive unless you are an experienced
|
|
user with a thorough understanding of ReactOS storage management.
|
|
|
|
Example:
|
|
|
|
INACTIVE
|
|
.
|
|
Language=Chinese
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as inactive.
|
|
|
|
Syntax: INACTIVE
|
|
|
|
The computer may start from the next option specified in the BIOS such as a
|
|
CD-ROM drive or a Pre-Boot eXecution Environment (PXE)-based boot
|
|
environment (such as Remote Installation Services (RIS)) when you restart
|
|
the computer.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Your computer might not start without an active partition. Do not mark
|
|
a system or boot partition as inactive unless you are an experienced
|
|
user with a thorough understanding of ReactOS storage management.
|
|
|
|
Example:
|
|
|
|
INACTIVE
|
|
.
|
|
Language=Taiwanese
|
|
On disks with master boot record (MBR) disk formatting, marks
|
|
the partition with focus as inactive.
|
|
|
|
Syntax: INACTIVE
|
|
|
|
The computer may start from the next option specified in the BIOS such as a
|
|
CD-ROM drive or a Pre-Boot eXecution Environment (PXE)-based boot
|
|
environment (such as Remote Installation Services (RIS)) when you restart
|
|
the computer.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Your computer might not start without an active partition. Do not mark
|
|
a system or boot partition as inactive unless you are an experienced
|
|
user with a thorough understanding of ReactOS storage management.
|
|
|
|
Example:
|
|
|
|
INACTIVE
|
|
.
|
|
|
|
|
|
MessageId=10032
|
|
SymbolicName=MSG_COMMAND_LIST_DISK
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Displays a list of disks.
|
|
|
|
Syntax: LIST DISK
|
|
|
|
Displays a list of disks and information about them, such as their
|
|
size, amount of available free space, whether the disk is a basic
|
|
or dynamic disk, and whether the disk uses the master boot record
|
|
(MBR) or GUID partition table (GPT) partition style. The disk marked
|
|
with an asterisk (*) has focus.
|
|
|
|
Note that the FREE column does not display the total amount of free
|
|
space on the disk, but rather the amount of usable free space left
|
|
on the disk. For example, if you have a 10GB disk with 4 primary
|
|
partitions covering 5GB, there is no usable free space left (no
|
|
more partitions may be created). Another example would be you have
|
|
a 10GB disk with 3 primary partitions and an extended partition
|
|
covering 8GB. The exended partition is of size 3GB with one logical
|
|
drive of size 2GB. The disk will show only 1GB as free - the
|
|
1GB of free space in the extended partition.
|
|
|
|
Example:
|
|
|
|
LIST DISK
|
|
.
|
|
Language=German
|
|
Zeigt eine Liste der Datenträger an.
|
|
|
|
Syntax: LIST DISK
|
|
|
|
Zeigt eine Liste mit Datenträgern und entsprechenden Informa-
|
|
tionen an - beispielsweise Größe, verfügbarer Speicherplatz sowie
|
|
Angaben dazu, ob es sich bei dem Datenträger um einen
|
|
Basisdatenträger oder um einen dynamischer Datenträger handelt
|
|
und ob der MBR- oder der GUID-Partitionsstil (Master Boot Record
|
|
oder GUID-Partitionstabelle) verwendet wird.
|
|
Den Fokus besitzt der mit einem Sternchen (*) markierte Datenträger.
|
|
|
|
In der Spalte "FREE" wird nicht der gesamte freie Speicherplatz
|
|
auf dem Datenträger, sondern der verbleibende, verwendbare freie
|
|
Speicherplatz angezeigt. Bei einem Datenträger mit 10 GB mit
|
|
4 primären Partitionen zu 5 GB verbleibt beispielsweise kein freier
|
|
verwendbarer Speicherplatz (es können keine weiteren Partitionen
|
|
erstellt werden). Ein weiteres Beispiel ist ein 10 GB Datenträger mit
|
|
3 primären Partitionen und einer erweiterten Partition mit 8 GB. Die
|
|
erweiterte Partition besitzt eine Größe von 3 GB mit einem logischen
|
|
Laufwerk (2 GB). Für den Datenträger wird nur 1 GB als frei
|
|
angezeigt - 1 GB freier Speicherplatz in der erweiterten Partition.
|
|
|
|
Beispiel:
|
|
|
|
LIST DISK
|
|
.
|
|
Language=Polish
|
|
Displays a list of disks.
|
|
|
|
Syntax: LIST DISK
|
|
|
|
Displays a list of disks and information about them, such as their
|
|
size, amount of available free space, whether the disk is a basic
|
|
or dynamic disk, and whether the disk uses the master boot record
|
|
(MBR) or GUID partition table (GPT) partition style. The disk marked
|
|
with an asterisk (*) has focus.
|
|
|
|
Note that the FREE column does not display the total amount of free
|
|
space on the disk, but rather the amount of usable free space left
|
|
on the disk. For example, if you have a 10GB disk with 4 primary
|
|
partitions covering 5GB, there is no usable free space left (no
|
|
more partitions may be created). Another example would be you have
|
|
a 10GB disk with 3 primary partitions and an extended partition
|
|
covering 8GB. The exended partition is of size 3GB with one logical
|
|
drive of size 2GB. The disk will show only 1GB as free - the
|
|
1GB of free space in the extended partition.
|
|
|
|
Example:
|
|
|
|
LIST DISK
|
|
.
|
|
Language=Portugese
|
|
Displays a list of disks.
|
|
|
|
Syntax: LIST DISK
|
|
|
|
Displays a list of disks and information about them, such as their
|
|
size, amount of available free space, whether the disk is a basic
|
|
or dynamic disk, and whether the disk uses the master boot record
|
|
(MBR) or GUID partition table (GPT) partition style. The disk marked
|
|
with an asterisk (*) has focus.
|
|
|
|
Note that the FREE column does not display the total amount of free
|
|
space on the disk, but rather the amount of usable free space left
|
|
on the disk. For example, if you have a 10GB disk with 4 primary
|
|
partitions covering 5GB, there is no usable free space left (no
|
|
more partitions may be created). Another example would be you have
|
|
a 10GB disk with 3 primary partitions and an extended partition
|
|
covering 8GB. The exended partition is of size 3GB with one logical
|
|
drive of size 2GB. The disk will show only 1GB as free - the
|
|
1GB of free space in the extended partition.
|
|
|
|
Example:
|
|
|
|
LIST DISK
|
|
.
|
|
Language=Romanian
|
|
Displays a list of disks.
|
|
|
|
Syntax: LIST DISK
|
|
|
|
Displays a list of disks and information about them, such as their
|
|
size, amount of available free space, whether the disk is a basic
|
|
or dynamic disk, and whether the disk uses the master boot record
|
|
(MBR) or GUID partition table (GPT) partition style. The disk marked
|
|
with an asterisk (*) has focus.
|
|
|
|
Note that the FREE column does not display the total amount of free
|
|
space on the disk, but rather the amount of usable free space left
|
|
on the disk. For example, if you have a 10GB disk with 4 primary
|
|
partitions covering 5GB, there is no usable free space left (no
|
|
more partitions may be created). Another example would be you have
|
|
a 10GB disk with 3 primary partitions and an extended partition
|
|
covering 8GB. The exended partition is of size 3GB with one logical
|
|
drive of size 2GB. The disk will show only 1GB as free - the
|
|
1GB of free space in the extended partition.
|
|
|
|
Example:
|
|
|
|
LIST DISK
|
|
.
|
|
Language=Russian
|
|
Displays a list of disks.
|
|
|
|
Syntax: LIST DISK
|
|
|
|
Displays a list of disks and information about them, such as their
|
|
size, amount of available free space, whether the disk is a basic
|
|
or dynamic disk, and whether the disk uses the master boot record
|
|
(MBR) or GUID partition table (GPT) partition style. The disk marked
|
|
with an asterisk (*) has focus.
|
|
|
|
Note that the FREE column does not display the total amount of free
|
|
space on the disk, but rather the amount of usable free space left
|
|
on the disk. For example, if you have a 10GB disk with 4 primary
|
|
partitions covering 5GB, there is no usable free space left (no
|
|
more partitions may be created). Another example would be you have
|
|
a 10GB disk with 3 primary partitions and an extended partition
|
|
covering 8GB. The exended partition is of size 3GB with one logical
|
|
drive of size 2GB. The disk will show only 1GB as free - the
|
|
1GB of free space in the extended partition.
|
|
|
|
Example:
|
|
|
|
LIST DISK
|
|
.
|
|
Language=Albanian
|
|
Displays a list of disks.
|
|
|
|
Syntax: LIST DISK
|
|
|
|
Displays a list of disks and information about them, such as their
|
|
size, amount of available free space, whether the disk is a basic
|
|
or dynamic disk, and whether the disk uses the master boot record
|
|
(MBR) or GUID partition table (GPT) partition style. The disk marked
|
|
with an asterisk (*) has focus.
|
|
|
|
Note that the FREE column does not display the total amount of free
|
|
space on the disk, but rather the amount of usable free space left
|
|
on the disk. For example, if you have a 10GB disk with 4 primary
|
|
partitions covering 5GB, there is no usable free space left (no
|
|
more partitions may be created). Another example would be you have
|
|
a 10GB disk with 3 primary partitions and an extended partition
|
|
covering 8GB. The exended partition is of size 3GB with one logical
|
|
drive of size 2GB. The disk will show only 1GB as free - the
|
|
1GB of free space in the extended partition.
|
|
|
|
Example:
|
|
|
|
LIST DISK
|
|
.
|
|
Language=Turkish
|
|
Displays a list of disks.
|
|
|
|
Syntax: LIST DISK
|
|
|
|
Displays a list of disks and information about them, such as their
|
|
size, amount of available free space, whether the disk is a basic
|
|
or dynamic disk, and whether the disk uses the master boot record
|
|
(MBR) or GUID partition table (GPT) partition style. The disk marked
|
|
with an asterisk (*) has focus.
|
|
|
|
Note that the FREE column does not display the total amount of free
|
|
space on the disk, but rather the amount of usable free space left
|
|
on the disk. For example, if you have a 10GB disk with 4 primary
|
|
partitions covering 5GB, there is no usable free space left (no
|
|
more partitions may be created). Another example would be you have
|
|
a 10GB disk with 3 primary partitions and an extended partition
|
|
covering 8GB. The exended partition is of size 3GB with one logical
|
|
drive of size 2GB. The disk will show only 1GB as free - the
|
|
1GB of free space in the extended partition.
|
|
|
|
Example:
|
|
|
|
LIST DISK
|
|
.
|
|
Language=Chinese
|
|
Displays a list of disks.
|
|
|
|
Syntax: LIST DISK
|
|
|
|
Displays a list of disks and information about them, such as their
|
|
size, amount of available free space, whether the disk is a basic
|
|
or dynamic disk, and whether the disk uses the master boot record
|
|
(MBR) or GUID partition table (GPT) partition style. The disk marked
|
|
with an asterisk (*) has focus.
|
|
|
|
Note that the FREE column does not display the total amount of free
|
|
space on the disk, but rather the amount of usable free space left
|
|
on the disk. For example, if you have a 10GB disk with 4 primary
|
|
partitions covering 5GB, there is no usable free space left (no
|
|
more partitions may be created). Another example would be you have
|
|
a 10GB disk with 3 primary partitions and an extended partition
|
|
covering 8GB. The exended partition is of size 3GB with one logical
|
|
drive of size 2GB. The disk will show only 1GB as free - the
|
|
1GB of free space in the extended partition.
|
|
|
|
Example:
|
|
|
|
LIST DISK
|
|
.
|
|
Language=Taiwanese
|
|
Displays a list of disks.
|
|
|
|
Syntax: LIST DISK
|
|
|
|
Displays a list of disks and information about them, such as their
|
|
size, amount of available free space, whether the disk is a basic
|
|
or dynamic disk, and whether the disk uses the master boot record
|
|
(MBR) or GUID partition table (GPT) partition style. The disk marked
|
|
with an asterisk (*) has focus.
|
|
|
|
Note that the FREE column does not display the total amount of free
|
|
space on the disk, but rather the amount of usable free space left
|
|
on the disk. For example, if you have a 10GB disk with 4 primary
|
|
partitions covering 5GB, there is no usable free space left (no
|
|
more partitions may be created). Another example would be you have
|
|
a 10GB disk with 3 primary partitions and an extended partition
|
|
covering 8GB. The exended partition is of size 3GB with one logical
|
|
drive of size 2GB. The disk will show only 1GB as free - the
|
|
1GB of free space in the extended partition.
|
|
|
|
Example:
|
|
|
|
LIST DISK
|
|
.
|
|
|
|
MessageId=10033
|
|
SymbolicName=MSG_COMMAND_LIST_PARTITION
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Displays a list of partitions in the partition table for the selected disk.
|
|
|
|
Syntax: LIST PARTITION
|
|
|
|
On dynamic disks, the partitions do not neccessarily correspond to the
|
|
dynamic volumes on the disk. Partitions may not be created or deleted
|
|
on dynamic disks.
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
LIST PARTITION
|
|
.
|
|
Language=German
|
|
Zeigt eine Liste der Partitionen in der Partitionstabelle für den
|
|
ausgewählten Datenträger an.
|
|
|
|
Syntax: LIST PARTITION
|
|
|
|
Auf dynamischen Datenträgern entsprechen die Partitionen nicht unbedingt
|
|
den dynamischen Volumes auf dem Datenträger. Partitionen werden auf
|
|
dynamischen Datenträgern möglicherweise nicht erstellt oder gelöscht.
|
|
|
|
Damit dieser Vorgang erfolgreich ausgeführt werden kann, muss ein
|
|
Datenträger ausgewählt werden.
|
|
|
|
Beispiel:
|
|
|
|
LIST PARTITION
|
|
.
|
|
Language=Polish
|
|
Displays a list of partitions in the partition table for the selected disk.
|
|
|
|
Syntax: LIST PARTITION
|
|
|
|
On dynamic disks, the partitions do not neccessarily correspond to the
|
|
dynamic volumes on the disk. Partitions may not be created or deleted
|
|
on dynamic disks.
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
LIST PARTITION
|
|
.
|
|
Language=Portugese
|
|
Displays a list of partitions in the partition table for the selected disk.
|
|
|
|
Syntax: LIST PARTITION
|
|
|
|
On dynamic disks, the partitions do not neccessarily correspond to the
|
|
dynamic volumes on the disk. Partitions may not be created or deleted
|
|
on dynamic disks.
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
LIST PARTITION
|
|
.
|
|
Language=Romanian
|
|
Displays a list of partitions in the partition table for the selected disk.
|
|
|
|
Syntax: LIST PARTITION
|
|
|
|
On dynamic disks, the partitions do not neccessarily correspond to the
|
|
dynamic volumes on the disk. Partitions may not be created or deleted
|
|
on dynamic disks.
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
LIST PARTITION
|
|
.
|
|
Language=Russian
|
|
Displays a list of partitions in the partition table for the selected disk.
|
|
|
|
Syntax: LIST PARTITION
|
|
|
|
On dynamic disks, the partitions do not neccessarily correspond to the
|
|
dynamic volumes on the disk. Partitions may not be created or deleted
|
|
on dynamic disks.
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
LIST PARTITION
|
|
.
|
|
Language=Albanian
|
|
Displays a list of partitions in the partition table for the selected disk.
|
|
|
|
Syntax: LIST PARTITION
|
|
|
|
On dynamic disks, the partitions do not neccessarily correspond to the
|
|
dynamic volumes on the disk. Partitions may not be created or deleted
|
|
on dynamic disks.
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
LIST PARTITION
|
|
.
|
|
Language=Turkish
|
|
Displays a list of partitions in the partition table for the selected disk.
|
|
|
|
Syntax: LIST PARTITION
|
|
|
|
On dynamic disks, the partitions do not neccessarily correspond to the
|
|
dynamic volumes on the disk. Partitions may not be created or deleted
|
|
on dynamic disks.
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
LIST PARTITION
|
|
.
|
|
Language=Chinese
|
|
Displays a list of partitions in the partition table for the selected disk.
|
|
|
|
Syntax: LIST PARTITION
|
|
|
|
On dynamic disks, the partitions do not neccessarily correspond to the
|
|
dynamic volumes on the disk. Partitions may not be created or deleted
|
|
on dynamic disks.
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
LIST PARTITION
|
|
.
|
|
Language=Taiwanese
|
|
Displays a list of partitions in the partition table for the selected disk.
|
|
|
|
Syntax: LIST PARTITION
|
|
|
|
On dynamic disks, the partitions do not neccessarily correspond to the
|
|
dynamic volumes on the disk. Partitions may not be created or deleted
|
|
on dynamic disks.
|
|
|
|
A disk must be selected for this operation to succeed.
|
|
|
|
Example:
|
|
|
|
LIST PARTITION
|
|
.
|
|
|
|
|
|
MessageId=10034
|
|
SymbolicName=MSG_COMMAND_LIST_VOLUME
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Displays a list of basic and dynamic volumes which are installed on the local
|
|
machine.
|
|
|
|
Syntax: LIST VOLUME
|
|
|
|
Example:
|
|
|
|
LIST VOLUME
|
|
.
|
|
Language=German
|
|
Zeigt eine Liste der Basisvolumes und dynamischen Volumes an, die auf dem
|
|
lokalen Computer installiert sind.
|
|
|
|
Syntax: LIST VOLUME
|
|
|
|
Beispiel:
|
|
|
|
LIST VOLUME
|
|
.
|
|
Language=Polish
|
|
Displays a list of basic and dynamic volumes which are installed on the local
|
|
machine.
|
|
|
|
Syntax: LIST VOLUME
|
|
|
|
Example:
|
|
|
|
LIST VOLUME
|
|
.
|
|
Language=Portugese
|
|
Displays a list of basic and dynamic volumes which are installed on the local
|
|
machine.
|
|
|
|
Syntax: LIST VOLUME
|
|
|
|
Example:
|
|
|
|
LIST VOLUME
|
|
.
|
|
Language=Romanian
|
|
Displays a list of basic and dynamic volumes which are installed on the local
|
|
machine.
|
|
|
|
Syntax: LIST VOLUME
|
|
|
|
Example:
|
|
|
|
LIST VOLUME
|
|
.
|
|
Language=Russian
|
|
Displays a list of basic and dynamic volumes which are installed on the local
|
|
machine.
|
|
|
|
Syntax: LIST VOLUME
|
|
|
|
Example:
|
|
|
|
LIST VOLUME
|
|
.
|
|
Language=Albanian
|
|
Displays a list of basic and dynamic volumes which are installed on the local
|
|
machine.
|
|
|
|
Syntax: LIST VOLUME
|
|
|
|
Example:
|
|
|
|
LIST VOLUME
|
|
.
|
|
Language=Turkish
|
|
Displays a list of basic and dynamic volumes which are installed on the local
|
|
machine.
|
|
|
|
Syntax: LIST VOLUME
|
|
|
|
Example:
|
|
|
|
LIST VOLUME
|
|
.
|
|
Language=Chinese
|
|
Displays a list of basic and dynamic volumes which are installed on the local
|
|
machine.
|
|
|
|
Syntax: LIST VOLUME
|
|
|
|
Example:
|
|
|
|
LIST VOLUME
|
|
.
|
|
Language=Taiwanese
|
|
Displays a list of basic and dynamic volumes which are installed on the local
|
|
machine.
|
|
|
|
Syntax: LIST VOLUME
|
|
|
|
Example:
|
|
|
|
LIST VOLUME
|
|
.
|
|
|
|
|
|
MessageId=10035
|
|
SymbolicName=MSG_COMMAND_LIST_VDISK
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add LIST VDISK command help text here>
|
|
.
|
|
Language=German
|
|
<Add LIST VDISK command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add LIST VDISK command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add LIST VDISK command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add LIST VDISK command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add LIST VDISK command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add LIST VDISK command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add LIST VDISK command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add LIST VDISK command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add LIST VDISK command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10036
|
|
SymbolicName=MSG_COMMAND_MERGE
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add MERGE command help text here>
|
|
.
|
|
Language=German
|
|
<Add MERGE command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add MERGE command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add MERGE command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add MERGE command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add MERGE command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add MERGE command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add MERGE command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add MERGE command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add MERGE command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10037
|
|
SymbolicName=MSG_COMMAND_OFFLINE
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add OFFLINE command help text here>
|
|
.
|
|
Language=German
|
|
<Add OFFLINE command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add OFFLINE command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add OFFLINE command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add OFFLINE command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add OFFLINE command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add OFFLINE command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add OFFLINE command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add OFFLINE command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add OFFLINE command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10038
|
|
SymbolicName=MSG_COMMAND_ONLINE
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add ONLINE command help text here>
|
|
.
|
|
Language=German
|
|
<Add ONLINE command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add ONLINE command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add ONLINE command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add ONLINE command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add ONLINE command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add ONLINE command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add ONLINE command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add ONLINE command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add ONLINE command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10039
|
|
SymbolicName=MSG_COMMAND_RECOVER
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add RECOVER command help text here>
|
|
.
|
|
Language=German
|
|
<Add RECOVER command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add RECOVER command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add RECOVER command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add RECOVER command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add RECOVER command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add RECOVER command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add RECOVER command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add RECOVER command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add RECOVER command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10040
|
|
SymbolicName=MSG_COMMAND_REM
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Provides a way to add comments to a script.
|
|
|
|
Syntax: REM
|
|
|
|
Example:
|
|
|
|
In this example script, REM is used to provide a comment about what the
|
|
script does.
|
|
|
|
REM These commands set up 3 drives.
|
|
CREATE PARTITION PRIMARY SIZE=2048
|
|
ASSIGN d:
|
|
CREATE PARTITION EXTEND
|
|
CREATE PARTITION LOGICAL SIZE=2048
|
|
ASSIGN e:
|
|
CREATE PARTITION LOGICAL
|
|
ASSIGN f:
|
|
.
|
|
Language=German
|
|
Bietet eine Möglichkeit, einem Skript Kommentare hinzuzufügen.
|
|
|
|
Syntax: REM
|
|
|
|
Beispiel:
|
|
|
|
In diesem Beispielskript wird mit REM ein Kommentar eingeleitet, mit
|
|
dem die Funktion des Skripts erläutert wird.
|
|
|
|
REM Mit diesen Befehlen werden drei Laufwerke eingerichtet.
|
|
CREATE PARITION PRIMARY SIZE=2048
|
|
ASSIGN d:
|
|
CREATE PARTITION EXTEND
|
|
CREATE PARTITION LOGICAL SIZE=2048
|
|
ASSIGN e:
|
|
CREATE PARTITION LOGICAL
|
|
ASSIGN f:
|
|
.
|
|
Language=Polish
|
|
Provides a way to add comments to a script.
|
|
|
|
Syntax: REM
|
|
|
|
Example:
|
|
|
|
In this example script, REM is used to provide a comment about what the
|
|
script does.
|
|
|
|
REM These commands set up 3 drives.
|
|
CREATE PARTITION PRIMARY SIZE=2048
|
|
ASSIGN d:
|
|
CREATE PARTITION EXTEND
|
|
CREATE PARTITION LOGICAL SIZE=2048
|
|
ASSIGN e:
|
|
CREATE PARTITION LOGICAL
|
|
ASSIGN f:
|
|
.
|
|
Language=Portugese
|
|
Provides a way to add comments to a script.
|
|
|
|
Syntax: REM
|
|
|
|
Example:
|
|
|
|
In this example script, REM is used to provide a comment about what the
|
|
script does.
|
|
|
|
REM These commands set up 3 drives.
|
|
CREATE PARTITION PRIMARY SIZE=2048
|
|
ASSIGN d:
|
|
CREATE PARTITION EXTEND
|
|
CREATE PARTITION LOGICAL SIZE=2048
|
|
ASSIGN e:
|
|
CREATE PARTITION LOGICAL
|
|
ASSIGN f:
|
|
.
|
|
Language=Romanian
|
|
Provides a way to add comments to a script.
|
|
|
|
Syntax: REM
|
|
|
|
Example:
|
|
|
|
In this example script, REM is used to provide a comment about what the
|
|
script does.
|
|
|
|
REM These commands set up 3 drives.
|
|
CREATE PARTITION PRIMARY SIZE=2048
|
|
ASSIGN d:
|
|
CREATE PARTITION EXTEND
|
|
CREATE PARTITION LOGICAL SIZE=2048
|
|
ASSIGN e:
|
|
CREATE PARTITION LOGICAL
|
|
ASSIGN f:
|
|
.
|
|
Language=Russian
|
|
Provides a way to add comments to a script.
|
|
|
|
Syntax: REM
|
|
|
|
Example:
|
|
|
|
In this example script, REM is used to provide a comment about what the
|
|
script does.
|
|
|
|
REM These commands set up 3 drives.
|
|
CREATE PARTITION PRIMARY SIZE=2048
|
|
ASSIGN d:
|
|
CREATE PARTITION EXTEND
|
|
CREATE PARTITION LOGICAL SIZE=2048
|
|
ASSIGN e:
|
|
CREATE PARTITION LOGICAL
|
|
ASSIGN f:
|
|
.
|
|
Language=Albanian
|
|
Provides a way to add comments to a script.
|
|
|
|
Syntax: REM
|
|
|
|
Example:
|
|
|
|
In this example script, REM is used to provide a comment about what the
|
|
script does.
|
|
|
|
REM These commands set up 3 drives.
|
|
CREATE PARTITION PRIMARY SIZE=2048
|
|
ASSIGN d:
|
|
CREATE PARTITION EXTEND
|
|
CREATE PARTITION LOGICAL SIZE=2048
|
|
ASSIGN e:
|
|
CREATE PARTITION LOGICAL
|
|
ASSIGN f:
|
|
.
|
|
Language=Turkish
|
|
Provides a way to add comments to a script.
|
|
|
|
Syntax: REM
|
|
|
|
Example:
|
|
|
|
In this example script, REM is used to provide a comment about what the
|
|
script does.
|
|
|
|
REM These commands set up 3 drives.
|
|
CREATE PARTITION PRIMARY SIZE=2048
|
|
ASSIGN d:
|
|
CREATE PARTITION EXTEND
|
|
CREATE PARTITION LOGICAL SIZE=2048
|
|
ASSIGN e:
|
|
CREATE PARTITION LOGICAL
|
|
ASSIGN f:
|
|
.
|
|
Language=Chinese
|
|
Provides a way to add comments to a script.
|
|
|
|
Syntax: REM
|
|
|
|
Example:
|
|
|
|
In this example script, REM is used to provide a comment about what the
|
|
script does.
|
|
|
|
REM These commands set up 3 drives.
|
|
CREATE PARTITION PRIMARY SIZE=2048
|
|
ASSIGN d:
|
|
CREATE PARTITION EXTEND
|
|
CREATE PARTITION LOGICAL SIZE=2048
|
|
ASSIGN e:
|
|
CREATE PARTITION LOGICAL
|
|
ASSIGN f:
|
|
.
|
|
Language=Taiwanese
|
|
Provides a way to add comments to a script.
|
|
|
|
Syntax: REM
|
|
|
|
Example:
|
|
|
|
In this example script, REM is used to provide a comment about what the
|
|
script does.
|
|
|
|
REM These commands set up 3 drives.
|
|
CREATE PARTITION PRIMARY SIZE=2048
|
|
ASSIGN d:
|
|
CREATE PARTITION EXTEND
|
|
CREATE PARTITION LOGICAL SIZE=2048
|
|
ASSIGN e:
|
|
CREATE PARTITION LOGICAL
|
|
ASSIGN f:
|
|
.
|
|
|
|
|
|
MessageId=10041
|
|
SymbolicName=MSG_COMMAND_REMOVE
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add REMOVE command help text here>
|
|
.
|
|
Language=German
|
|
<Add REMOVE command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add REMOVE command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add REMOVE command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add REMOVE command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add REMOVE command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add REMOVE command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add REMOVE command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add REMOVE command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add REMOVE command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10042
|
|
SymbolicName=MSG_COMMAND_REPAIR
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add REPAIR command help text here>
|
|
.
|
|
Language=German
|
|
<Add REPAIR command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add REPAIR command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add REPAIR command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add REPAIR command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add REPAIR command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add REPAIR command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add REPAIR command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add REPAIR command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add REPAIR command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10043
|
|
SymbolicName=MSG_COMMAND_RESCAN
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Locates new disks that may have been added to the computer.
|
|
|
|
Syntax: RESCAN
|
|
|
|
Example:
|
|
|
|
RESCAN
|
|
.
|
|
Language=German
|
|
Sucht nach neuen Datenträgern, die dem Computer möglicherweise
|
|
hinzugefügt wurden.
|
|
|
|
Syntax: RESCAN
|
|
|
|
Beispiel:
|
|
|
|
RESCAN
|
|
.
|
|
Language=Polish
|
|
Locates new disks that may have been added to the computer.
|
|
|
|
Syntax: RESCAN
|
|
|
|
Example:
|
|
|
|
RESCAN
|
|
.
|
|
Language=Portugese
|
|
Locates new disks that may have been added to the computer.
|
|
|
|
Syntax: RESCAN
|
|
|
|
Example:
|
|
|
|
RESCAN
|
|
.
|
|
Language=Romanian
|
|
Locates new disks that may have been added to the computer.
|
|
|
|
Syntax: RESCAN
|
|
|
|
Example:
|
|
|
|
RESCAN
|
|
.
|
|
Language=Russian
|
|
Locates new disks that may have been added to the computer.
|
|
|
|
Syntax: RESCAN
|
|
|
|
Example:
|
|
|
|
RESCAN
|
|
.
|
|
Language=Albanian
|
|
Locates new disks that may have been added to the computer.
|
|
|
|
Syntax: RESCAN
|
|
|
|
Example:
|
|
|
|
RESCAN
|
|
.
|
|
Language=Turkish
|
|
Locates new disks that may have been added to the computer.
|
|
|
|
Syntax: RESCAN
|
|
|
|
Example:
|
|
|
|
RESCAN
|
|
.
|
|
Language=Chinese
|
|
Locates new disks that may have been added to the computer.
|
|
|
|
Syntax: RESCAN
|
|
|
|
Example:
|
|
|
|
RESCAN
|
|
.
|
|
Language=Taiwanese
|
|
Locates new disks that may have been added to the computer.
|
|
|
|
Syntax: RESCAN
|
|
|
|
Example:
|
|
|
|
RESCAN
|
|
.
|
|
|
|
|
|
MessageId=10044
|
|
SymbolicName=MSG_COMMAND_RETAIN
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add RETAIN command help text here>
|
|
.
|
|
Language=German
|
|
<Add RETAIN command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add RETAIN command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add RETAIN command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add RETAIN command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add RETAIN command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add RETAIN command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add RETAIN command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add RETAIN command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add RETAIN command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10045
|
|
SymbolicName=MSG_COMMAND_SAN
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add SAN command help text here>
|
|
.
|
|
Language=German
|
|
<Add SAN command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add SAN command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add SAN command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add SAN command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add SAN command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add SAN command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add SAN command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add SAN command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add SAN command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10046
|
|
SymbolicName=MSG_COMMAND_SELECT_DISK
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Selects the specified disk and shifts the focus to it.
|
|
|
|
Syntax: SELECT DISK=<N>
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=<Path>
|
|
|
|
DISK=<N>
|
|
The DiskPart disk index number of the disk to receive
|
|
focus.
|
|
|
|
DISK=<Path>
|
|
The location path of the disk to receive focus.
|
|
|
|
DISK=SYSTEM
|
|
On BIOS machines, BIOS disk 0 will receive focus.
|
|
On EFI machines, the disk containing the ESP partition
|
|
used for the current boot will receive focus. On EFI
|
|
machines, if there is no ESP, or there is more than
|
|
one ESP present, or the machine is booted from Windows PE,
|
|
the command will fail.
|
|
|
|
DISK=NEXT
|
|
Once a disk is selected, this command is used to iterate
|
|
over all disks in the disk list. The next disk in the list
|
|
will receive focus. If the next disk is the start of the
|
|
enumeration, the command will fail and no disk will have
|
|
focus.
|
|
|
|
If no options are specified, the select command lists the disk that
|
|
currently has the focus. You can view the DiskPart index numbers
|
|
for all disks on the computer by using the LIST DISK command.
|
|
|
|
Example:
|
|
|
|
SELECT DISK=1
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=PCIROOT(0)#PCI(0100)#ATA(C00T00L01)
|
|
.
|
|
Language=German
|
|
Dient zum Auswählen des angegebenen Datenträgers sowie zum
|
|
Festlegen des Fokus auf den Datenträger.
|
|
|
|
Syntax: SELECT DISK=<N>
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=<Path>
|
|
|
|
DISK=<N>
|
|
Die DiskPart-Datenträgerindexnummer des Datenträgers, auf
|
|
den der Fokus festgelegt werden soll.
|
|
|
|
DISK=<Pfad>
|
|
Der Speicherortpfad des Datenträgers, auf den der Fokus
|
|
festgelegt werden soll.
|
|
|
|
DISK=SYSTEM
|
|
Bei BIOS-Computern erhält der BIOS-Datenträger "0" den
|
|
Fokus. Bei EFI-Computern erhält der Datenträger mit der
|
|
ESP-Partition, der für den aktuellen Startvorgang verwendet
|
|
wird, den Fokus. Bei EFI-Computern ohne ESP oder mit
|
|
mehreren ESPs (oder beim Start des Computers unter Ver-
|
|
wendung von Windows PE) tritt bei Verwendung des Befehls
|
|
ein Fehler auf.
|
|
|
|
DISK=NEXT
|
|
Nach Auswahl eines Datenträgers erfolgt mithilfe dieses
|
|
Befehls eine Iteration durch alle Datenträger in der Daten-
|
|
trägerliste. Der nächste Datenträger in der Liste erhält den
|
|
Fokus. Handelt es sich beim nächsten Datenträger um den
|
|
Beginn der Aufzählung, tritt bei dem Befehl ein Fehler auf, und
|
|
keiner der Datenträger erhält den Fokus.
|
|
|
|
Ohne Angabe von Optionen wird mithilfe des Befehls "Select" der
|
|
Datenträger angegeben, der derzeit den Fokus besitzt. Verwenden
|
|
Sie zum Anzeigen der DiskPart-Indexnummern für alle Datenträger
|
|
des Computers den Befehl "LIST DISK".
|
|
|
|
Beispiele:
|
|
|
|
SELECT DISK=1
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=PCIROOT(0)#PCI(0100)#ATA(C00T00L01)
|
|
.
|
|
Language=Polish
|
|
Selects the specified disk and shifts the focus to it.
|
|
|
|
Syntax: SELECT DISK=<N>
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=<Path>
|
|
|
|
DISK=<N>
|
|
The DiskPart disk index number of the disk to receive
|
|
focus.
|
|
|
|
DISK=<Path>
|
|
The location path of the disk to receive focus.
|
|
|
|
DISK=SYSTEM
|
|
On BIOS machines, BIOS disk 0 will receive focus.
|
|
On EFI machines, the disk containing the ESP partition
|
|
used for the current boot will receive focus. On EFI
|
|
machines, if there is no ESP, or there is more than
|
|
one ESP present, or the machine is booted from Windows PE,
|
|
the command will fail.
|
|
|
|
DISK=NEXT
|
|
Once a disk is selected, this command is used to iterate
|
|
over all disks in the disk list. The next disk in the list
|
|
will receive focus. If the next disk is the start of the
|
|
enumeration, the command will fail and no disk will have
|
|
focus.
|
|
|
|
If no options are specified, the select command lists the disk that
|
|
currently has the focus. You can view the DiskPart index numbers
|
|
for all disks on the computer by using the LIST DISK command.
|
|
|
|
Example:
|
|
|
|
SELECT DISK=1
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=PCIROOT(0)#PCI(0100)#ATA(C00T00L01)
|
|
.
|
|
Language=Portugese
|
|
Selects the specified disk and shifts the focus to it.
|
|
|
|
Syntax: SELECT DISK=<N>
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=<Path>
|
|
|
|
DISK=<N>
|
|
The DiskPart disk index number of the disk to receive
|
|
focus.
|
|
|
|
DISK=<Path>
|
|
The location path of the disk to receive focus.
|
|
|
|
DISK=SYSTEM
|
|
On BIOS machines, BIOS disk 0 will receive focus.
|
|
On EFI machines, the disk containing the ESP partition
|
|
used for the current boot will receive focus. On EFI
|
|
machines, if there is no ESP, or there is more than
|
|
one ESP present, or the machine is booted from Windows PE,
|
|
the command will fail.
|
|
|
|
DISK=NEXT
|
|
Once a disk is selected, this command is used to iterate
|
|
over all disks in the disk list. The next disk in the list
|
|
will receive focus. If the next disk is the start of the
|
|
enumeration, the command will fail and no disk will have
|
|
focus.
|
|
|
|
If no options are specified, the select command lists the disk that
|
|
currently has the focus. You can view the DiskPart index numbers
|
|
for all disks on the computer by using the LIST DISK command.
|
|
|
|
Example:
|
|
|
|
SELECT DISK=1
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=PCIROOT(0)#PCI(0100)#ATA(C00T00L01)
|
|
.
|
|
Language=Romanian
|
|
Selects the specified disk and shifts the focus to it.
|
|
|
|
Syntax: SELECT DISK=<N>
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=<Path>
|
|
|
|
DISK=<N>
|
|
The DiskPart disk index number of the disk to receive
|
|
focus.
|
|
|
|
DISK=<Path>
|
|
The location path of the disk to receive focus.
|
|
|
|
DISK=SYSTEM
|
|
On BIOS machines, BIOS disk 0 will receive focus.
|
|
On EFI machines, the disk containing the ESP partition
|
|
used for the current boot will receive focus. On EFI
|
|
machines, if there is no ESP, or there is more than
|
|
one ESP present, or the machine is booted from Windows PE,
|
|
the command will fail.
|
|
|
|
DISK=NEXT
|
|
Once a disk is selected, this command is used to iterate
|
|
over all disks in the disk list. The next disk in the list
|
|
will receive focus. If the next disk is the start of the
|
|
enumeration, the command will fail and no disk will have
|
|
focus.
|
|
|
|
If no options are specified, the select command lists the disk that
|
|
currently has the focus. You can view the DiskPart index numbers
|
|
for all disks on the computer by using the LIST DISK command.
|
|
|
|
Example:
|
|
|
|
SELECT DISK=1
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=PCIROOT(0)#PCI(0100)#ATA(C00T00L01)
|
|
.
|
|
Language=Russian
|
|
Selects the specified disk and shifts the focus to it.
|
|
|
|
Syntax: SELECT DISK=<N>
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=<Path>
|
|
|
|
DISK=<N>
|
|
The DiskPart disk index number of the disk to receive
|
|
focus.
|
|
|
|
DISK=<Path>
|
|
The location path of the disk to receive focus.
|
|
|
|
DISK=SYSTEM
|
|
On BIOS machines, BIOS disk 0 will receive focus.
|
|
On EFI machines, the disk containing the ESP partition
|
|
used for the current boot will receive focus. On EFI
|
|
machines, if there is no ESP, or there is more than
|
|
one ESP present, or the machine is booted from Windows PE,
|
|
the command will fail.
|
|
|
|
DISK=NEXT
|
|
Once a disk is selected, this command is used to iterate
|
|
over all disks in the disk list. The next disk in the list
|
|
will receive focus. If the next disk is the start of the
|
|
enumeration, the command will fail and no disk will have
|
|
focus.
|
|
|
|
If no options are specified, the select command lists the disk that
|
|
currently has the focus. You can view the DiskPart index numbers
|
|
for all disks on the computer by using the LIST DISK command.
|
|
|
|
Example:
|
|
|
|
SELECT DISK=1
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=PCIROOT(0)#PCI(0100)#ATA(C00T00L01)
|
|
.
|
|
Language=Albanian
|
|
Selects the specified disk and shifts the focus to it.
|
|
|
|
Syntax: SELECT DISK=<N>
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=<Path>
|
|
|
|
DISK=<N>
|
|
The DiskPart disk index number of the disk to receive
|
|
focus.
|
|
|
|
DISK=<Path>
|
|
The location path of the disk to receive focus.
|
|
|
|
DISK=SYSTEM
|
|
On BIOS machines, BIOS disk 0 will receive focus.
|
|
On EFI machines, the disk containing the ESP partition
|
|
used for the current boot will receive focus. On EFI
|
|
machines, if there is no ESP, or there is more than
|
|
one ESP present, or the machine is booted from Windows PE,
|
|
the command will fail.
|
|
|
|
DISK=NEXT
|
|
Once a disk is selected, this command is used to iterate
|
|
over all disks in the disk list. The next disk in the list
|
|
will receive focus. If the next disk is the start of the
|
|
enumeration, the command will fail and no disk will have
|
|
focus.
|
|
|
|
If no options are specified, the select command lists the disk that
|
|
currently has the focus. You can view the DiskPart index numbers
|
|
for all disks on the computer by using the LIST DISK command.
|
|
|
|
Example:
|
|
|
|
SELECT DISK=1
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=PCIROOT(0)#PCI(0100)#ATA(C00T00L01)
|
|
.
|
|
Language=Turkish
|
|
Selects the specified disk and shifts the focus to it.
|
|
|
|
Syntax: SELECT DISK=<N>
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=<Path>
|
|
|
|
DISK=<N>
|
|
The DiskPart disk index number of the disk to receive
|
|
focus.
|
|
|
|
DISK=<Path>
|
|
The location path of the disk to receive focus.
|
|
|
|
DISK=SYSTEM
|
|
On BIOS machines, BIOS disk 0 will receive focus.
|
|
On EFI machines, the disk containing the ESP partition
|
|
used for the current boot will receive focus. On EFI
|
|
machines, if there is no ESP, or there is more than
|
|
one ESP present, or the machine is booted from Windows PE,
|
|
the command will fail.
|
|
|
|
DISK=NEXT
|
|
Once a disk is selected, this command is used to iterate
|
|
over all disks in the disk list. The next disk in the list
|
|
will receive focus. If the next disk is the start of the
|
|
enumeration, the command will fail and no disk will have
|
|
focus.
|
|
|
|
If no options are specified, the select command lists the disk that
|
|
currently has the focus. You can view the DiskPart index numbers
|
|
for all disks on the computer by using the LIST DISK command.
|
|
|
|
Example:
|
|
|
|
SELECT DISK=1
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=PCIROOT(0)#PCI(0100)#ATA(C00T00L01)
|
|
.
|
|
Language=Chinese
|
|
Selects the specified disk and shifts the focus to it.
|
|
|
|
Syntax: SELECT DISK=<N>
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=<Path>
|
|
|
|
DISK=<N>
|
|
The DiskPart disk index number of the disk to receive
|
|
focus.
|
|
|
|
DISK=<Path>
|
|
The location path of the disk to receive focus.
|
|
|
|
DISK=SYSTEM
|
|
On BIOS machines, BIOS disk 0 will receive focus.
|
|
On EFI machines, the disk containing the ESP partition
|
|
used for the current boot will receive focus. On EFI
|
|
machines, if there is no ESP, or there is more than
|
|
one ESP present, or the machine is booted from Windows PE,
|
|
the command will fail.
|
|
|
|
DISK=NEXT
|
|
Once a disk is selected, this command is used to iterate
|
|
over all disks in the disk list. The next disk in the list
|
|
will receive focus. If the next disk is the start of the
|
|
enumeration, the command will fail and no disk will have
|
|
focus.
|
|
|
|
If no options are specified, the select command lists the disk that
|
|
currently has the focus. You can view the DiskPart index numbers
|
|
for all disks on the computer by using the LIST DISK command.
|
|
|
|
Example:
|
|
|
|
SELECT DISK=1
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=PCIROOT(0)#PCI(0100)#ATA(C00T00L01)
|
|
.
|
|
Language=Taiwanese
|
|
Selects the specified disk and shifts the focus to it.
|
|
|
|
Syntax: SELECT DISK=<N>
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=<Path>
|
|
|
|
DISK=<N>
|
|
The DiskPart disk index number of the disk to receive
|
|
focus.
|
|
|
|
DISK=<Path>
|
|
The location path of the disk to receive focus.
|
|
|
|
DISK=SYSTEM
|
|
On BIOS machines, BIOS disk 0 will receive focus.
|
|
On EFI machines, the disk containing the ESP partition
|
|
used for the current boot will receive focus. On EFI
|
|
machines, if there is no ESP, or there is more than
|
|
one ESP present, or the machine is booted from Windows PE,
|
|
the command will fail.
|
|
|
|
DISK=NEXT
|
|
Once a disk is selected, this command is used to iterate
|
|
over all disks in the disk list. The next disk in the list
|
|
will receive focus. If the next disk is the start of the
|
|
enumeration, the command will fail and no disk will have
|
|
focus.
|
|
|
|
If no options are specified, the select command lists the disk that
|
|
currently has the focus. You can view the DiskPart index numbers
|
|
for all disks on the computer by using the LIST DISK command.
|
|
|
|
Example:
|
|
|
|
SELECT DISK=1
|
|
SELECT DISK=SYSTEM
|
|
SELECT DISK=NEXT
|
|
SELECT DISK=PCIROOT(0)#PCI(0100)#ATA(C00T00L01)
|
|
.
|
|
|
|
|
|
MessageId=10047
|
|
SymbolicName=MSG_COMMAND_SELECT_PARTITION
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Selects the specified partition and shifts the focus to it.
|
|
|
|
Syntax: SELECT PARTITION=<N>
|
|
|
|
PARTITION=<N>
|
|
|
|
The number of the partition to receive the focus.
|
|
|
|
If no partition is specified, the select command lists the current
|
|
partition with focus. You can specify the partition by its number. You can
|
|
view the numbers of all partitions on the current disk by using the list
|
|
partition command.
|
|
|
|
You must first select a disk using the DiskPart select disk command before
|
|
you can select a partition.
|
|
|
|
Example:
|
|
|
|
SELECT PARTITION=1
|
|
.
|
|
Language=German
|
|
Wählt die angegebene Partition aus und setzt den Fokus auf diese
|
|
Partition.
|
|
|
|
Syntax: SELECT PARTITION=<N>
|
|
|
|
PARTITION=<N>
|
|
|
|
Die Nummer der Partition, die den Fokus erhalten soll.
|
|
|
|
Wenn keine Partition angegeben ist, listet der Befehl SELECT die
|
|
aktuelle Partition auf, die den Fokus hat. Sie können die Partition
|
|
mit ihrer Nummer angeben. Mit dem Befehl LIST PARTITION können die
|
|
Nummern aller auf dem aktuellen Datenträger enthaltenen Partitionen
|
|
angezeigt werden.
|
|
|
|
Bevor Sie eine Partition auswählen können, müssen Sie zunächst mit dem
|
|
DiskPart-Befehl SELECT DISK einen Datenträger auswählen.
|
|
|
|
Beispiel:
|
|
|
|
SELECT PARTITION=1
|
|
.
|
|
Language=Polish
|
|
Selects the specified partition and shifts the focus to it.
|
|
|
|
Syntax: SELECT PARTITION=<N>
|
|
|
|
PARTITION=<N>
|
|
|
|
The number of the partition to receive the focus.
|
|
|
|
If no partition is specified, the select command lists the current
|
|
partition with focus. You can specify the partition by its number. You can
|
|
view the numbers of all partitions on the current disk by using the list
|
|
partition command.
|
|
|
|
You must first select a disk using the DiskPart select disk command before
|
|
you can select a partition.
|
|
|
|
Example:
|
|
|
|
SELECT PARTITION=1
|
|
.
|
|
Language=Portugese
|
|
Selects the specified partition and shifts the focus to it.
|
|
|
|
Syntax: SELECT PARTITION=<N>
|
|
|
|
PARTITION=<N>
|
|
|
|
The number of the partition to receive the focus.
|
|
|
|
If no partition is specified, the select command lists the current
|
|
partition with focus. You can specify the partition by its number. You can
|
|
view the numbers of all partitions on the current disk by using the list
|
|
partition command.
|
|
|
|
You must first select a disk using the DiskPart select disk command before
|
|
you can select a partition.
|
|
|
|
Example:
|
|
|
|
SELECT PARTITION=1
|
|
.
|
|
Language=Romanian
|
|
Selects the specified partition and shifts the focus to it.
|
|
|
|
Syntax: SELECT PARTITION=<N>
|
|
|
|
PARTITION=<N>
|
|
|
|
The number of the partition to receive the focus.
|
|
|
|
If no partition is specified, the select command lists the current
|
|
partition with focus. You can specify the partition by its number. You can
|
|
view the numbers of all partitions on the current disk by using the list
|
|
partition command.
|
|
|
|
You must first select a disk using the DiskPart select disk command before
|
|
you can select a partition.
|
|
|
|
Example:
|
|
|
|
SELECT PARTITION=1
|
|
.
|
|
Language=Russian
|
|
Selects the specified partition and shifts the focus to it.
|
|
|
|
Syntax: SELECT PARTITION=<N>
|
|
|
|
PARTITION=<N>
|
|
|
|
The number of the partition to receive the focus.
|
|
|
|
If no partition is specified, the select command lists the current
|
|
partition with focus. You can specify the partition by its number. You can
|
|
view the numbers of all partitions on the current disk by using the list
|
|
partition command.
|
|
|
|
You must first select a disk using the DiskPart select disk command before
|
|
you can select a partition.
|
|
|
|
Example:
|
|
|
|
SELECT PARTITION=1
|
|
.
|
|
Language=Albanian
|
|
Selects the specified partition and shifts the focus to it.
|
|
|
|
Syntax: SELECT PARTITION=<N>
|
|
|
|
PARTITION=<N>
|
|
|
|
The number of the partition to receive the focus.
|
|
|
|
If no partition is specified, the select command lists the current
|
|
partition with focus. You can specify the partition by its number. You can
|
|
view the numbers of all partitions on the current disk by using the list
|
|
partition command.
|
|
|
|
You must first select a disk using the DiskPart select disk command before
|
|
you can select a partition.
|
|
|
|
Example:
|
|
|
|
SELECT PARTITION=1
|
|
.
|
|
Language=Turkish
|
|
Selects the specified partition and shifts the focus to it.
|
|
|
|
Syntax: SELECT PARTITION=<N>
|
|
|
|
PARTITION=<N>
|
|
|
|
The number of the partition to receive the focus.
|
|
|
|
If no partition is specified, the select command lists the current
|
|
partition with focus. You can specify the partition by its number. You can
|
|
view the numbers of all partitions on the current disk by using the list
|
|
partition command.
|
|
|
|
You must first select a disk using the DiskPart select disk command before
|
|
you can select a partition.
|
|
|
|
Example:
|
|
|
|
SELECT PARTITION=1
|
|
.
|
|
Language=Chinese
|
|
Selects the specified partition and shifts the focus to it.
|
|
|
|
Syntax: SELECT PARTITION=<N>
|
|
|
|
PARTITION=<N>
|
|
|
|
The number of the partition to receive the focus.
|
|
|
|
If no partition is specified, the select command lists the current
|
|
partition with focus. You can specify the partition by its number. You can
|
|
view the numbers of all partitions on the current disk by using the list
|
|
partition command.
|
|
|
|
You must first select a disk using the DiskPart select disk command before
|
|
you can select a partition.
|
|
|
|
Example:
|
|
|
|
SELECT PARTITION=1
|
|
.
|
|
Language=Taiwanese
|
|
Selects the specified partition and shifts the focus to it.
|
|
|
|
Syntax: SELECT PARTITION=<N>
|
|
|
|
PARTITION=<N>
|
|
|
|
The number of the partition to receive the focus.
|
|
|
|
If no partition is specified, the select command lists the current
|
|
partition with focus. You can specify the partition by its number. You can
|
|
view the numbers of all partitions on the current disk by using the list
|
|
partition command.
|
|
|
|
You must first select a disk using the DiskPart select disk command before
|
|
you can select a partition.
|
|
|
|
Example:
|
|
|
|
SELECT PARTITION=1
|
|
.
|
|
|
|
|
|
MessageId=10048
|
|
SymbolicName=MSG_COMMAND_SELECT_VOLUME
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Selects the specified volume and shifts the focus to it.
|
|
|
|
Syntax: SELECT VOLUME={<N> | <D>}
|
|
|
|
VOLUME=<N> The number of the volume to receive the focus.
|
|
|
|
VOLUME=<D> The drive letter or mounted folder path of the volume
|
|
to receive the focus.
|
|
|
|
If no volume is specified, the select command lists the current volume with
|
|
focus. You can specify the volume by number, drive letter, or mounted folder
|
|
path. On a basic disk, selecting a volume also gives the corresponding
|
|
partition focus. You can view the numbers of all volumes on the computer by
|
|
using the list volume command.
|
|
|
|
Example:
|
|
|
|
SELECT VOLUME=1
|
|
SELECT VOLUME=C
|
|
SELECT VOLUME=C:\\MountH
|
|
.
|
|
Language=German
|
|
Wählt das angegebene Volume aus und setzt den Fokus auf dieses Volume.
|
|
|
|
Syntax: SELECT VOLUME={<N> | <L>}
|
|
|
|
VOLUME=<N> Die Nummer des Volumes, das den Fokus erhalten soll.
|
|
|
|
VOLUME=<L> Der Laufwerkbuchstabe oder Pfad des eingebundenen Ordners des
|
|
Volumes, das den Fokus erhalten soll.
|
|
|
|
Wenn kein Volume angegeben ist, listet der Befehl SELECT das aktuelle
|
|
Volume auf, das den Fokus besitzt. Sie können das Volume mit einer Nummer,
|
|
einem Laufwerkbuchstaben oder dem Pfad des eingebundenen
|
|
Ordners angeben.
|
|
Auf einem Basisdatenträger erhält bei Auswahl eines Volumes auch die
|
|
entsprechende Partition den Fokus. Mit dem Befehl LIST VOLUME können Sie
|
|
die Nummern aller auf dem Computer vorhandenen Volumes anzeigen.
|
|
|
|
Beispiel:
|
|
|
|
SELECT VOLUME=1
|
|
SELECT VOLUME=C
|
|
SELECT VOLUME=C:\\MountH
|
|
.
|
|
Language=Polish
|
|
Selects the specified volume and shifts the focus to it.
|
|
|
|
Syntax: SELECT VOLUME={<N> | <D>}
|
|
|
|
VOLUME=<N> The number of the volume to receive the focus.
|
|
|
|
VOLUME=<D> The drive letter or mounted folder path of the volume
|
|
to receive the focus.
|
|
|
|
If no volume is specified, the select command lists the current volume with
|
|
focus. You can specify the volume by number, drive letter, or mounted folder
|
|
path. On a basic disk, selecting a volume also gives the corresponding
|
|
partition focus. You can view the numbers of all volumes on the computer by
|
|
using the list volume command.
|
|
|
|
Example:
|
|
|
|
SELECT VOLUME=1
|
|
SELECT VOLUME=C
|
|
SELECT VOLUME=C:\\MountH
|
|
.
|
|
Language=Portugese
|
|
Selects the specified volume and shifts the focus to it.
|
|
|
|
Syntax: SELECT VOLUME={<N> | <D>}
|
|
|
|
VOLUME=<N> The number of the volume to receive the focus.
|
|
|
|
VOLUME=<D> The drive letter or mounted folder path of the volume
|
|
to receive the focus.
|
|
|
|
If no volume is specified, the select command lists the current volume with
|
|
focus. You can specify the volume by number, drive letter, or mounted folder
|
|
path. On a basic disk, selecting a volume also gives the corresponding
|
|
partition focus. You can view the numbers of all volumes on the computer by
|
|
using the list volume command.
|
|
|
|
Example:
|
|
|
|
SELECT VOLUME=1
|
|
SELECT VOLUME=C
|
|
SELECT VOLUME=C:\\MountH
|
|
.
|
|
Language=Romanian
|
|
Selects the specified volume and shifts the focus to it.
|
|
|
|
Syntax: SELECT VOLUME={<N> | <D>}
|
|
|
|
VOLUME=<N> The number of the volume to receive the focus.
|
|
|
|
VOLUME=<D> The drive letter or mounted folder path of the volume
|
|
to receive the focus.
|
|
|
|
If no volume is specified, the select command lists the current volume with
|
|
focus. You can specify the volume by number, drive letter, or mounted folder
|
|
path. On a basic disk, selecting a volume also gives the corresponding
|
|
partition focus. You can view the numbers of all volumes on the computer by
|
|
using the list volume command.
|
|
|
|
Example:
|
|
|
|
SELECT VOLUME=1
|
|
SELECT VOLUME=C
|
|
SELECT VOLUME=C:\\MountH
|
|
.
|
|
Language=Russian
|
|
Selects the specified volume and shifts the focus to it.
|
|
|
|
Syntax: SELECT VOLUME={<N> | <D>}
|
|
|
|
VOLUME=<N> The number of the volume to receive the focus.
|
|
|
|
VOLUME=<D> The drive letter or mounted folder path of the volume
|
|
to receive the focus.
|
|
|
|
If no volume is specified, the select command lists the current volume with
|
|
focus. You can specify the volume by number, drive letter, or mounted folder
|
|
path. On a basic disk, selecting a volume also gives the corresponding
|
|
partition focus. You can view the numbers of all volumes on the computer by
|
|
using the list volume command.
|
|
|
|
Example:
|
|
|
|
SELECT VOLUME=1
|
|
SELECT VOLUME=C
|
|
SELECT VOLUME=C:\\MountH
|
|
.
|
|
Language=Albanian
|
|
Selects the specified volume and shifts the focus to it.
|
|
|
|
Syntax: SELECT VOLUME={<N> | <D>}
|
|
|
|
VOLUME=<N> The number of the volume to receive the focus.
|
|
|
|
VOLUME=<D> The drive letter or mounted folder path of the volume
|
|
to receive the focus.
|
|
|
|
If no volume is specified, the select command lists the current volume with
|
|
focus. You can specify the volume by number, drive letter, or mounted folder
|
|
path. On a basic disk, selecting a volume also gives the corresponding
|
|
partition focus. You can view the numbers of all volumes on the computer by
|
|
using the list volume command.
|
|
|
|
Example:
|
|
|
|
SELECT VOLUME=1
|
|
SELECT VOLUME=C
|
|
SELECT VOLUME=C:\\MountH
|
|
.
|
|
Language=Turkish
|
|
Selects the specified volume and shifts the focus to it.
|
|
|
|
Syntax: SELECT VOLUME={<N> | <D>}
|
|
|
|
VOLUME=<N> The number of the volume to receive the focus.
|
|
|
|
VOLUME=<D> The drive letter or mounted folder path of the volume
|
|
to receive the focus.
|
|
|
|
If no volume is specified, the select command lists the current volume with
|
|
focus. You can specify the volume by number, drive letter, or mounted folder
|
|
path. On a basic disk, selecting a volume also gives the corresponding
|
|
partition focus. You can view the numbers of all volumes on the computer by
|
|
using the list volume command.
|
|
|
|
Example:
|
|
|
|
SELECT VOLUME=1
|
|
SELECT VOLUME=C
|
|
SELECT VOLUME=C:\\MountH
|
|
.
|
|
Language=Chinese
|
|
Selects the specified volume and shifts the focus to it.
|
|
|
|
Syntax: SELECT VOLUME={<N> | <D>}
|
|
|
|
VOLUME=<N> The number of the volume to receive the focus.
|
|
|
|
VOLUME=<D> The drive letter or mounted folder path of the volume
|
|
to receive the focus.
|
|
|
|
If no volume is specified, the select command lists the current volume with
|
|
focus. You can specify the volume by number, drive letter, or mounted folder
|
|
path. On a basic disk, selecting a volume also gives the corresponding
|
|
partition focus. You can view the numbers of all volumes on the computer by
|
|
using the list volume command.
|
|
|
|
Example:
|
|
|
|
SELECT VOLUME=1
|
|
SELECT VOLUME=C
|
|
SELECT VOLUME=C:\\MountH
|
|
.
|
|
Language=Taiwanese
|
|
Selects the specified volume and shifts the focus to it.
|
|
|
|
Syntax: SELECT VOLUME={<N> | <D>}
|
|
|
|
VOLUME=<N> The number of the volume to receive the focus.
|
|
|
|
VOLUME=<D> The drive letter or mounted folder path of the volume
|
|
to receive the focus.
|
|
|
|
If no volume is specified, the select command lists the current volume with
|
|
focus. You can specify the volume by number, drive letter, or mounted folder
|
|
path. On a basic disk, selecting a volume also gives the corresponding
|
|
partition focus. You can view the numbers of all volumes on the computer by
|
|
using the list volume command.
|
|
|
|
Example:
|
|
|
|
SELECT VOLUME=1
|
|
SELECT VOLUME=C
|
|
SELECT VOLUME=C:\\MountH
|
|
.
|
|
|
|
|
|
MessageId=10049
|
|
SymbolicName=MSG_COMMAND_SELECT_VDISK
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add SELECT VDISK command help text here>
|
|
.
|
|
Language=German
|
|
<Add SELECT VDISK command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add SELECT VDISK command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add SELECT VDISK command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add SELECT VDISK command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add SELECT VDISK command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add SELECT VDISK command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add SELECT VDISK command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add SELECT VDISK command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add SELECT VDISK command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10050
|
|
SymbolicName=MSG_COMMAND_SETID
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Changes the partition type field for the partition with focus.
|
|
|
|
Syntax: SET ID={<BYTE> | <GUID>} [OVERRIDE] [NOERR]
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the new partition type.
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. Any
|
|
partition type byte can be specified with this parameter except
|
|
for type 0x42 (LDM partition). Note that the leading '0x' is
|
|
omitted when specifying the hexadecimal partition type.
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition. Recognized GUIDs
|
|
include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
Any partition type GUID can be specified with this parameter
|
|
except for the following:
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215a
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Cluster Metadata partition:
|
|
db97dba9-0840-4bae-97f0-ffb9a327c7e1
|
|
|
|
|
|
Other than the limitations mentioned, DiskPart otherwise does
|
|
not check the partition type for validity except to ensure that
|
|
it is a byte in hexadecimal form or a GUID.
|
|
|
|
OVERRIDE Enables DiskPart to force the file system on the volume to
|
|
dismount before changing the partition type. When changing
|
|
the partition type, DiskPart will attempt to lock and dismount
|
|
the file system on the volume. If this parameter is not specified,
|
|
and the call to lock the file system fails, (because some other
|
|
application has an open handle to the volume), the entire
|
|
operation will fail. When this parameter is specified, the
|
|
dismount is forced even if the call to lock the file system
|
|
fails. When a file system is dismounted, all opened handles to
|
|
the volume will become invalid.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Changing partition type fields with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are an OEM or an
|
|
IT professional experienced with GPT disks, do not change partition
|
|
type fields on GPT disks using this parameter. Instead, always use the
|
|
CREATE PARTITION EFI command to create EFI System partitions, the
|
|
CREATE PARTITION MSR command to create Microsoft Reserved partitions,
|
|
and the CREATE PARTITION PRIMARY command without the ID parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
This command does not work on dynamic disks nor on Microsoft Reserved
|
|
partitions.
|
|
|
|
Example:
|
|
SET ID=07 OVERRIDE
|
|
SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
.
|
|
Language=German
|
|
|
|
Ändert das Partitionstypfeld für die Partition im Fokus.
|
|
|
|
Syntax: SET ID={<BYTE> | <GUID>} [OVERRIDE] [NOERR]
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Gibt den neuen Partitionstyp an.
|
|
|
|
Für MBR-Datenträger (Master Boot Record) können Sie ein
|
|
Partitionstypbyte im Hexadezimalformat angeben. Mit
|
|
diesem Parameter können Sie jedes Partitionstypbyte angeben,
|
|
außer Typ "0x42" (LDM-Partition). Das voranstehende "0x" wird
|
|
bei Angabe des hexadezimalen Partitionstyps ausgelassen.
|
|
|
|
Für GPT-Datenträger (GPT = GUID-Partitionstabelle) können
|
|
Sie einen Partitionstyp-GUID für die zu erstellende Partition
|
|
angeben: Zu den erkannten GUIDs gehören:
|
|
|
|
EFI-Systempartition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Basisdatenpartition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
Mit diesem Parameter kann jeder Partitionstyp-GUID
|
|
angegeben werden, mit Ausnahme der folgenden:
|
|
|
|
MSR-Partition (Microsoft Reserved):
|
|
e3c9e316-0b5c-4db8-817d-f92df00215ae
|
|
|
|
LDM-Metadatenpartition auf einem dynamischen Datenträger:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM-Datenpartition auf einem dynamischen Datenträger:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Clustermetadaten-Partition:
|
|
db97dba9-0840-4bae-97f0-ffb9a327c7e1
|
|
|
|
|
|
Abgesehen von den erwähnten Einschränkungen überprüft
|
|
DiskPart die Gültigkeit des Partitionstyps nicht. Es wird
|
|
lediglich sichergestellt, dass es sich um ein Byte im Hexadezi-
|
|
malformat oder um einen GUID handelt
|
|
|
|
OVERRIDE Ermöglicht DiskPart die Aufhebung der Bereitstellung
|
|
des Dateisystems auf dem Volume zu erzwingen, bevor der
|
|
Partitionstyp geändert wird. Beim Ändern des Partitionstyps
|
|
wird das Dateisystem auf dem Volume gesperrt und dessen
|
|
Bereitstellung aufgehoben. Wird dieser Parameter nicht an-
|
|
gegeben und schlägt der Aufruf zum Sperren des Dateisys-
|
|
tems fehl (da einige andere Anwendungen über ein geöffne-
|
|
tes Handle für das Volume verfügen), schlägt der gesamte
|
|
Vorgang fehl. Bei Angabe dieses Parameters wird die Auf-
|
|
hebung der Bereitstellung auch dann erzwungen, wenn der
|
|
Aufruf des Dateisystems fehlschlägt. Wird die Bereitstellung
|
|
eines Dateisystems aufgehoben, werden alle geöffneten
|
|
Handles für das Volume ungültig.
|
|
|
|
NOERR Nur für Skripting. Bei einem Fehler wird die Verarbeitung von
|
|
Befehlen fortgesetzt, als sei der Fehler nicht aufgetreten.
|
|
Ohne NOERR-Parameter wird DiskPart bei einem Fehler mit
|
|
dem entsprechenden Fehlercode beendet.
|
|
|
|
Ist nur für die Verwendung durch Originalgerätehersteller
|
|
(OEM, Original Equipment Manufacturer) vorgesehen.
|
|
|
|
Damit dieser Vorgang erfolgreich ausgeführt werden kann, muss
|
|
eine Partition ausgewählt sein.
|
|
|
|
Vorsicht:
|
|
|
|
Das Ändern von Partitionstypfeldern mit diesem Parameter kann
|
|
dazu führen, dass der Computer nicht mehr ordnungsgemäß
|
|
funktioniert oder nicht mehr gestartet werden kann. Sofern Sie
|
|
kein Originalgerätehersteller oder IT-Fachmann sind, der mit GPT-
|
|
Datenträgern vertraut ist, sollten Sie keine Partitionstypfelder auf
|
|
GPT-Datenträgern mit diesem Parameter ändern. Verwenden Sie
|
|
stattdessen immer den Befehl "CREATE PARTITION EFI" zum
|
|
Erstellen von EFI-Systempartitionen, den Befehl "CREATE
|
|
PARTITION MSR" zum Erstellen von MSR-Partitionen und den
|
|
Befehl "CREATE PARTITION PRIMARY" (ohne diesen Parameter)
|
|
zum Erstellen von primären Partitionen auf GPT-Datenträgern.
|
|
|
|
Dieser Befehl funktioniert weder auf dynamischen Datenträgern noch
|
|
auf MSR-Partitionen (Microsoft Reserved).
|
|
|
|
Beispiel:
|
|
|
|
SET ID=07 OVERRIDE
|
|
SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
.
|
|
Language=Polish
|
|
Changes the partition type field for the partition with focus.
|
|
|
|
Syntax: SET ID={<BYTE> | <GUID>} [OVERRIDE] [NOERR]
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the new partition type.
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. Any
|
|
partition type byte can be specified with this parameter except
|
|
for type 0x42 (LDM partition). Note that the leading '0x' is
|
|
omitted when specifying the hexadecimal partition type.
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition. Recognized GUIDs
|
|
include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
Any partition type GUID can be specified with this parameter
|
|
except for the following:
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215a
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Cluster Metadata partition:
|
|
db97dba9-0840-4bae-97f0-ffb9a327c7e1
|
|
|
|
|
|
Other than the limitations mentioned, DiskPart otherwise does
|
|
not check the partition type for validity except to ensure that
|
|
it is a byte in hexadecimal form or a GUID.
|
|
|
|
OVERRIDE Enables DiskPart to force the file system on the volume to
|
|
dismount before changing the partition type. When changing
|
|
the partition type, DiskPart will attempt to lock and dismount
|
|
the file system on the volume. If this parameter is not specified,
|
|
and the call to lock the file system fails, (because some other
|
|
application has an open handle to the volume), the entire
|
|
operation will fail. When this parameter is specified, the
|
|
dismount is forced even if the call to lock the file system
|
|
fails. When a file system is dismounted, all opened handles to
|
|
the volume will become invalid.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Changing partition type fields with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are an OEM or an
|
|
IT professional experienced with GPT disks, do not change partition
|
|
type fields on GPT disks using this parameter. Instead, always use the
|
|
CREATE PARTITION EFI command to create EFI System partitions, the
|
|
CREATE PARTITION MSR command to create Microsoft Reserved partitions,
|
|
and the CREATE PARTITION PRIMARY command without the ID parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
This command does not work on dynamic disks nor on Microsoft Reserved
|
|
partitions.
|
|
|
|
Example:
|
|
SET ID=07 OVERRIDE
|
|
SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
.
|
|
Language=Portugese
|
|
Changes the partition type field for the partition with focus.
|
|
|
|
Syntax: SET ID={<BYTE> | <GUID>} [OVERRIDE] [NOERR]
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the new partition type.
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. Any
|
|
partition type byte can be specified with this parameter except
|
|
for type 0x42 (LDM partition). Note that the leading '0x' is
|
|
omitted when specifying the hexadecimal partition type.
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition. Recognized GUIDs
|
|
include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
Any partition type GUID can be specified with this parameter
|
|
except for the following:
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215a
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Cluster Metadata partition:
|
|
db97dba9-0840-4bae-97f0-ffb9a327c7e1
|
|
|
|
|
|
Other than the limitations mentioned, DiskPart otherwise does
|
|
not check the partition type for validity except to ensure that
|
|
it is a byte in hexadecimal form or a GUID.
|
|
|
|
OVERRIDE Enables DiskPart to force the file system on the volume to
|
|
dismount before changing the partition type. When changing
|
|
the partition type, DiskPart will attempt to lock and dismount
|
|
the file system on the volume. If this parameter is not specified,
|
|
and the call to lock the file system fails, (because some other
|
|
application has an open handle to the volume), the entire
|
|
operation will fail. When this parameter is specified, the
|
|
dismount is forced even if the call to lock the file system
|
|
fails. When a file system is dismounted, all opened handles to
|
|
the volume will become invalid.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Changing partition type fields with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are an OEM or an
|
|
IT professional experienced with GPT disks, do not change partition
|
|
type fields on GPT disks using this parameter. Instead, always use the
|
|
CREATE PARTITION EFI command to create EFI System partitions, the
|
|
CREATE PARTITION MSR command to create Microsoft Reserved partitions,
|
|
and the CREATE PARTITION PRIMARY command without the ID parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
This command does not work on dynamic disks nor on Microsoft Reserved
|
|
partitions.
|
|
|
|
Example:
|
|
SET ID=07 OVERRIDE
|
|
SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
.
|
|
Language=Romanian
|
|
Changes the partition type field for the partition with focus.
|
|
|
|
Syntax: SET ID={<BYTE> | <GUID>} [OVERRIDE] [NOERR]
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the new partition type.
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. Any
|
|
partition type byte can be specified with this parameter except
|
|
for type 0x42 (LDM partition). Note that the leading '0x' is
|
|
omitted when specifying the hexadecimal partition type.
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition. Recognized GUIDs
|
|
include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
Any partition type GUID can be specified with this parameter
|
|
except for the following:
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215a
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Cluster Metadata partition:
|
|
db97dba9-0840-4bae-97f0-ffb9a327c7e1
|
|
|
|
|
|
Other than the limitations mentioned, DiskPart otherwise does
|
|
not check the partition type for validity except to ensure that
|
|
it is a byte in hexadecimal form or a GUID.
|
|
|
|
OVERRIDE Enables DiskPart to force the file system on the volume to
|
|
dismount before changing the partition type. When changing
|
|
the partition type, DiskPart will attempt to lock and dismount
|
|
the file system on the volume. If this parameter is not specified,
|
|
and the call to lock the file system fails, (because some other
|
|
application has an open handle to the volume), the entire
|
|
operation will fail. When this parameter is specified, the
|
|
dismount is forced even if the call to lock the file system
|
|
fails. When a file system is dismounted, all opened handles to
|
|
the volume will become invalid.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Changing partition type fields with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are an OEM or an
|
|
IT professional experienced with GPT disks, do not change partition
|
|
type fields on GPT disks using this parameter. Instead, always use the
|
|
CREATE PARTITION EFI command to create EFI System partitions, the
|
|
CREATE PARTITION MSR command to create Microsoft Reserved partitions,
|
|
and the CREATE PARTITION PRIMARY command without the ID parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
This command does not work on dynamic disks nor on Microsoft Reserved
|
|
partitions.
|
|
|
|
Example:
|
|
SET ID=07 OVERRIDE
|
|
SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
.
|
|
Language=Russian
|
|
Changes the partition type field for the partition with focus.
|
|
|
|
Syntax: SET ID={<BYTE> | <GUID>} [OVERRIDE] [NOERR]
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the new partition type.
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. Any
|
|
partition type byte can be specified with this parameter except
|
|
for type 0x42 (LDM partition). Note that the leading '0x' is
|
|
omitted when specifying the hexadecimal partition type.
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition. Recognized GUIDs
|
|
include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
Any partition type GUID can be specified with this parameter
|
|
except for the following:
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215a
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Cluster Metadata partition:
|
|
db97dba9-0840-4bae-97f0-ffb9a327c7e1
|
|
|
|
|
|
Other than the limitations mentioned, DiskPart otherwise does
|
|
not check the partition type for validity except to ensure that
|
|
it is a byte in hexadecimal form or a GUID.
|
|
|
|
OVERRIDE Enables DiskPart to force the file system on the volume to
|
|
dismount before changing the partition type. When changing
|
|
the partition type, DiskPart will attempt to lock and dismount
|
|
the file system on the volume. If this parameter is not specified,
|
|
and the call to lock the file system fails, (because some other
|
|
application has an open handle to the volume), the entire
|
|
operation will fail. When this parameter is specified, the
|
|
dismount is forced even if the call to lock the file system
|
|
fails. When a file system is dismounted, all opened handles to
|
|
the volume will become invalid.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Changing partition type fields with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are an OEM or an
|
|
IT professional experienced with GPT disks, do not change partition
|
|
type fields on GPT disks using this parameter. Instead, always use the
|
|
CREATE PARTITION EFI command to create EFI System partitions, the
|
|
CREATE PARTITION MSR command to create Microsoft Reserved partitions,
|
|
and the CREATE PARTITION PRIMARY command without the ID parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
This command does not work on dynamic disks nor on Microsoft Reserved
|
|
partitions.
|
|
|
|
Example:
|
|
SET ID=07 OVERRIDE
|
|
SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
.
|
|
Language=Albanian
|
|
Changes the partition type field for the partition with focus.
|
|
|
|
Syntax: SET ID={<BYTE> | <GUID>} [OVERRIDE] [NOERR]
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the new partition type.
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. Any
|
|
partition type byte can be specified with this parameter except
|
|
for type 0x42 (LDM partition). Note that the leading '0x' is
|
|
omitted when specifying the hexadecimal partition type.
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition. Recognized GUIDs
|
|
include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
Any partition type GUID can be specified with this parameter
|
|
except for the following:
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215a
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Cluster Metadata partition:
|
|
db97dba9-0840-4bae-97f0-ffb9a327c7e1
|
|
|
|
|
|
Other than the limitations mentioned, DiskPart otherwise does
|
|
not check the partition type for validity except to ensure that
|
|
it is a byte in hexadecimal form or a GUID.
|
|
|
|
OVERRIDE Enables DiskPart to force the file system on the volume to
|
|
dismount before changing the partition type. When changing
|
|
the partition type, DiskPart will attempt to lock and dismount
|
|
the file system on the volume. If this parameter is not specified,
|
|
and the call to lock the file system fails, (because some other
|
|
application has an open handle to the volume), the entire
|
|
operation will fail. When this parameter is specified, the
|
|
dismount is forced even if the call to lock the file system
|
|
fails. When a file system is dismounted, all opened handles to
|
|
the volume will become invalid.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Changing partition type fields with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are an OEM or an
|
|
IT professional experienced with GPT disks, do not change partition
|
|
type fields on GPT disks using this parameter. Instead, always use the
|
|
CREATE PARTITION EFI command to create EFI System partitions, the
|
|
CREATE PARTITION MSR command to create Microsoft Reserved partitions,
|
|
and the CREATE PARTITION PRIMARY command without the ID parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
This command does not work on dynamic disks nor on Microsoft Reserved
|
|
partitions.
|
|
|
|
Example:
|
|
SET ID=07 OVERRIDE
|
|
SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
.
|
|
Language=Turkish
|
|
Changes the partition type field for the partition with focus.
|
|
|
|
Syntax: SET ID={<BYTE> | <GUID>} [OVERRIDE] [NOERR]
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the new partition type.
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. Any
|
|
partition type byte can be specified with this parameter except
|
|
for type 0x42 (LDM partition). Note that the leading '0x' is
|
|
omitted when specifying the hexadecimal partition type.
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition. Recognized GUIDs
|
|
include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
Any partition type GUID can be specified with this parameter
|
|
except for the following:
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215a
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Cluster Metadata partition:
|
|
db97dba9-0840-4bae-97f0-ffb9a327c7e1
|
|
|
|
|
|
Other than the limitations mentioned, DiskPart otherwise does
|
|
not check the partition type for validity except to ensure that
|
|
it is a byte in hexadecimal form or a GUID.
|
|
|
|
OVERRIDE Enables DiskPart to force the file system on the volume to
|
|
dismount before changing the partition type. When changing
|
|
the partition type, DiskPart will attempt to lock and dismount
|
|
the file system on the volume. If this parameter is not specified,
|
|
and the call to lock the file system fails, (because some other
|
|
application has an open handle to the volume), the entire
|
|
operation will fail. When this parameter is specified, the
|
|
dismount is forced even if the call to lock the file system
|
|
fails. When a file system is dismounted, all opened handles to
|
|
the volume will become invalid.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Changing partition type fields with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are an OEM or an
|
|
IT professional experienced with GPT disks, do not change partition
|
|
type fields on GPT disks using this parameter. Instead, always use the
|
|
CREATE PARTITION EFI command to create EFI System partitions, the
|
|
CREATE PARTITION MSR command to create Microsoft Reserved partitions,
|
|
and the CREATE PARTITION PRIMARY command without the ID parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
This command does not work on dynamic disks nor on Microsoft Reserved
|
|
partitions.
|
|
|
|
Example:
|
|
SET ID=07 OVERRIDE
|
|
SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
.
|
|
Language=Chinese
|
|
Changes the partition type field for the partition with focus.
|
|
|
|
Syntax: SET ID={<BYTE> | <GUID>} [OVERRIDE] [NOERR]
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the new partition type.
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. Any
|
|
partition type byte can be specified with this parameter except
|
|
for type 0x42 (LDM partition). Note that the leading '0x' is
|
|
omitted when specifying the hexadecimal partition type.
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition. Recognized GUIDs
|
|
include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
Any partition type GUID can be specified with this parameter
|
|
except for the following:
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215a
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Cluster Metadata partition:
|
|
db97dba9-0840-4bae-97f0-ffb9a327c7e1
|
|
|
|
|
|
Other than the limitations mentioned, DiskPart otherwise does
|
|
not check the partition type for validity except to ensure that
|
|
it is a byte in hexadecimal form or a GUID.
|
|
|
|
OVERRIDE Enables DiskPart to force the file system on the volume to
|
|
dismount before changing the partition type. When changing
|
|
the partition type, DiskPart will attempt to lock and dismount
|
|
the file system on the volume. If this parameter is not specified,
|
|
and the call to lock the file system fails, (because some other
|
|
application has an open handle to the volume), the entire
|
|
operation will fail. When this parameter is specified, the
|
|
dismount is forced even if the call to lock the file system
|
|
fails. When a file system is dismounted, all opened handles to
|
|
the volume will become invalid.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Changing partition type fields with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are an OEM or an
|
|
IT professional experienced with GPT disks, do not change partition
|
|
type fields on GPT disks using this parameter. Instead, always use the
|
|
CREATE PARTITION EFI command to create EFI System partitions, the
|
|
CREATE PARTITION MSR command to create Microsoft Reserved partitions,
|
|
and the CREATE PARTITION PRIMARY command without the ID parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
This command does not work on dynamic disks nor on Microsoft Reserved
|
|
partitions.
|
|
|
|
Example:
|
|
SET ID=07 OVERRIDE
|
|
SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
.
|
|
Language=Taiwanese
|
|
Changes the partition type field for the partition with focus.
|
|
|
|
Syntax: SET ID={<BYTE> | <GUID>} [OVERRIDE] [NOERR]
|
|
|
|
ID={<BYTE> | <GUID>}
|
|
|
|
Specifies the new partition type.
|
|
For master boot record (MBR) disks, you can specify a partition
|
|
type byte, in hexadecimal form, for the partition. Any
|
|
partition type byte can be specified with this parameter except
|
|
for type 0x42 (LDM partition). Note that the leading '0x' is
|
|
omitted when specifying the hexadecimal partition type.
|
|
|
|
For GUID partition table (GPT) disks you can specify a
|
|
partition type GUID for the partition. Recognized GUIDs
|
|
include:
|
|
|
|
EFI System partition:
|
|
c12a7328-f81f-11d2-ba4b-00a0c93ec93b
|
|
|
|
Basic data partition:
|
|
ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
|
|
Any partition type GUID can be specified with this parameter
|
|
except for the following:
|
|
|
|
Microsoft Reserved partition:
|
|
e3c9e316-0b5c-4db8-817d-f92df00215a
|
|
|
|
LDM Metadata partition on a dynamic disk:
|
|
5808c8aa-7e8f-42e0-85d2-e1e90434cfb3
|
|
|
|
LDM Data partition on a dynamic disk:
|
|
af9b60a0-1431-4f62-bc68-3311714a69ad
|
|
|
|
Cluster Metadata partition:
|
|
db97dba9-0840-4bae-97f0-ffb9a327c7e1
|
|
|
|
|
|
Other than the limitations mentioned, DiskPart otherwise does
|
|
not check the partition type for validity except to ensure that
|
|
it is a byte in hexadecimal form or a GUID.
|
|
|
|
OVERRIDE Enables DiskPart to force the file system on the volume to
|
|
dismount before changing the partition type. When changing
|
|
the partition type, DiskPart will attempt to lock and dismount
|
|
the file system on the volume. If this parameter is not specified,
|
|
and the call to lock the file system fails, (because some other
|
|
application has an open handle to the volume), the entire
|
|
operation will fail. When this parameter is specified, the
|
|
dismount is forced even if the call to lock the file system
|
|
fails. When a file system is dismounted, all opened handles to
|
|
the volume will become invalid.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
Intended for Original Equipment Manufacturer (OEM) use only.
|
|
|
|
A partition must be selected for this operation to succeed.
|
|
|
|
Caution:
|
|
|
|
Changing partition type fields with this parameter might cause your
|
|
computer to fail or be unable to start up. Unless you are an OEM or an
|
|
IT professional experienced with GPT disks, do not change partition
|
|
type fields on GPT disks using this parameter. Instead, always use the
|
|
CREATE PARTITION EFI command to create EFI System partitions, the
|
|
CREATE PARTITION MSR command to create Microsoft Reserved partitions,
|
|
and the CREATE PARTITION PRIMARY command without the ID parameter to
|
|
create primary partitions on GPT disks.
|
|
|
|
This command does not work on dynamic disks nor on Microsoft Reserved
|
|
partitions.
|
|
|
|
Example:
|
|
SET ID=07 OVERRIDE
|
|
SET ID=ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
|
|
.
|
|
|
|
|
|
MessageId=10051
|
|
SymbolicName=MSG_COMMAND_SHRINK
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
<Add SHRINK command help text here>
|
|
.
|
|
Language=German
|
|
<Add SHRINK command help text here>
|
|
.
|
|
Language=Polish
|
|
<Add SHRINK command help text here>
|
|
.
|
|
Language=Portugese
|
|
<Add SHRINK command help text here>
|
|
.
|
|
Language=Romanian
|
|
<Add SHRINK command help text here>
|
|
.
|
|
Language=Russian
|
|
<Add SHRINK command help text here>
|
|
.
|
|
Language=Albanian
|
|
<Add SHRINK command help text here>
|
|
.
|
|
Language=Turkish
|
|
<Add SHRINK command help text here>
|
|
.
|
|
Language=Chinese
|
|
<Add SHRINK command help text here>
|
|
.
|
|
Language=Taiwanese
|
|
<Add SHRINK command help text here>
|
|
.
|
|
|
|
|
|
MessageId=10052
|
|
SymbolicName=MSG_COMMAND_UNIQUEID_DISK
|
|
Severity=Informational
|
|
Facility=System
|
|
Language=English
|
|
Displays or sets the GUID partition table (GPT) identifier or master boot
|
|
record (MBR) signature for the disk with focus.
|
|
|
|
Syntax: UNIQUEID DISK [ID={<DWORD> | <GUID>}] [NOERR]
|
|
|
|
ID={<DWORD> | <GUID>}
|
|
|
|
For MBR disks, you can specify a four-byte (DWORD) value in
|
|
hexadecimal form for the signature.
|
|
|
|
For GPT disks, specify a GUID for the identifier.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A disk must be selected for this operation to succeed. This command works
|
|
on basic and dynamic disks.
|
|
|
|
Example:
|
|
|
|
UNIQUEID DISK
|
|
UNIQUEID DISK ID=5f1b2c36
|
|
UNIQUEID DISK ID=baf784e7-6bbd-4cfb-aaac-e86c96e166ee
|
|
.
|
|
Language=German
|
|
Dient zum Anzeigen oder Festlegen des GPT-Bezeichners (GPT =
|
|
GUID-Partitionstabelle) oder der MBR-Signatur (Master Boot Record)
|
|
für den Datenträger, der den Fokus hat.
|
|
|
|
Syntax: UNIQUEID DISK [ID={<DWORD> | <GUID>}] [NOERR]
|
|
|
|
ID={<DWORD> | <GUID>}
|
|
|
|
Für MBR-Datenträger können Sie einen Wert mit einer
|
|
Länge von vier Bytes (DWORD) im Hexadezimalformat für die
|
|
Signatur angeben.
|
|
|
|
Für GPT-Datenträger können Sie einen GUID für den
|
|
Bezeichner angeben.
|
|
|
|
NOERR Nur für Skripting. Wenn ein Fehler auftritt, setzt DiskPart
|
|
die Verarbeitung von Befehlen fort, als sei der Fehler nicht
|
|
aufgetreten. Ohne den Parameter NOERR wird DiskPart bei
|
|
einem Fehler mit dem entsprechenden Fehlercode beendet.
|
|
|
|
Damit dieser Vorgang erfolgreich ausgeführt werden kann, muss ein
|
|
Datenträger ausgewählt sein. Der Befehl kann für Basisdatenträger und
|
|
dynamische Datenträger verwendet werden.
|
|
|
|
Beispiel:
|
|
|
|
UNIQUEID DISK
|
|
UNIQUEID DISK ID=5f1b2c36
|
|
UNIQUEID DISK ID=baf784e7-6bbd-4cfb-aaac-e86c96e166ee
|
|
.
|
|
Language=Polish
|
|
Displays or sets the GUID partition table (GPT) identifier or master boot
|
|
record (MBR) signature for the disk with focus.
|
|
|
|
Syntax: UNIQUEID DISK [ID={<DWORD> | <GUID>}] [NOERR]
|
|
|
|
ID={<DWORD> | <GUID>}
|
|
|
|
For MBR disks, you can specify a four-byte (DWORD) value in
|
|
hexadecimal form for the signature.
|
|
|
|
For GPT disks, specify a GUID for the identifier.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A disk must be selected for this operation to succeed. This command works
|
|
on basic and dynamic disks.
|
|
|
|
Example:
|
|
|
|
UNIQUEID DISK
|
|
UNIQUEID DISK ID=5f1b2c36
|
|
UNIQUEID DISK ID=baf784e7-6bbd-4cfb-aaac-e86c96e166ee
|
|
.
|
|
Language=Portugese
|
|
Displays or sets the GUID partition table (GPT) identifier or master boot
|
|
record (MBR) signature for the disk with focus.
|
|
|
|
Syntax: UNIQUEID DISK [ID={<DWORD> | <GUID>}] [NOERR]
|
|
|
|
ID={<DWORD> | <GUID>}
|
|
|
|
For MBR disks, you can specify a four-byte (DWORD) value in
|
|
hexadecimal form for the signature.
|
|
|
|
For GPT disks, specify a GUID for the identifier.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A disk must be selected for this operation to succeed. This command works
|
|
on basic and dynamic disks.
|
|
|
|
Example:
|
|
|
|
UNIQUEID DISK
|
|
UNIQUEID DISK ID=5f1b2c36
|
|
UNIQUEID DISK ID=baf784e7-6bbd-4cfb-aaac-e86c96e166ee
|
|
.
|
|
Language=Romanian
|
|
Displays or sets the GUID partition table (GPT) identifier or master boot
|
|
record (MBR) signature for the disk with focus.
|
|
|
|
Syntax: UNIQUEID DISK [ID={<DWORD> | <GUID>}] [NOERR]
|
|
|
|
ID={<DWORD> | <GUID>}
|
|
|
|
For MBR disks, you can specify a four-byte (DWORD) value in
|
|
hexadecimal form for the signature.
|
|
|
|
For GPT disks, specify a GUID for the identifier.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A disk must be selected for this operation to succeed. This command works
|
|
on basic and dynamic disks.
|
|
|
|
Example:
|
|
|
|
UNIQUEID DISK
|
|
UNIQUEID DISK ID=5f1b2c36
|
|
UNIQUEID DISK ID=baf784e7-6bbd-4cfb-aaac-e86c96e166ee
|
|
.
|
|
Language=Russian
|
|
Displays or sets the GUID partition table (GPT) identifier or master boot
|
|
record (MBR) signature for the disk with focus.
|
|
|
|
Syntax: UNIQUEID DISK [ID={<DWORD> | <GUID>}] [NOERR]
|
|
|
|
ID={<DWORD> | <GUID>}
|
|
|
|
For MBR disks, you can specify a four-byte (DWORD) value in
|
|
hexadecimal form for the signature.
|
|
|
|
For GPT disks, specify a GUID for the identifier.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A disk must be selected for this operation to succeed. This command works
|
|
on basic and dynamic disks.
|
|
|
|
Example:
|
|
|
|
UNIQUEID DISK
|
|
UNIQUEID DISK ID=5f1b2c36
|
|
UNIQUEID DISK ID=baf784e7-6bbd-4cfb-aaac-e86c96e166ee
|
|
.
|
|
Language=Albanian
|
|
Displays or sets the GUID partition table (GPT) identifier or master boot
|
|
record (MBR) signature for the disk with focus.
|
|
|
|
Syntax: UNIQUEID DISK [ID={<DWORD> | <GUID>}] [NOERR]
|
|
|
|
ID={<DWORD> | <GUID>}
|
|
|
|
For MBR disks, you can specify a four-byte (DWORD) value in
|
|
hexadecimal form for the signature.
|
|
|
|
For GPT disks, specify a GUID for the identifier.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A disk must be selected for this operation to succeed. This command works
|
|
on basic and dynamic disks.
|
|
|
|
Example:
|
|
|
|
UNIQUEID DISK
|
|
UNIQUEID DISK ID=5f1b2c36
|
|
UNIQUEID DISK ID=baf784e7-6bbd-4cfb-aaac-e86c96e166ee
|
|
.
|
|
Language=Turkish
|
|
Displays or sets the GUID partition table (GPT) identifier or master boot
|
|
record (MBR) signature for the disk with focus.
|
|
|
|
Syntax: UNIQUEID DISK [ID={<DWORD> | <GUID>}] [NOERR]
|
|
|
|
ID={<DWORD> | <GUID>}
|
|
|
|
For MBR disks, you can specify a four-byte (DWORD) value in
|
|
hexadecimal form for the signature.
|
|
|
|
For GPT disks, specify a GUID for the identifier.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A disk must be selected for this operation to succeed. This command works
|
|
on basic and dynamic disks.
|
|
|
|
Example:
|
|
|
|
UNIQUEID DISK
|
|
UNIQUEID DISK ID=5f1b2c36
|
|
UNIQUEID DISK ID=baf784e7-6bbd-4cfb-aaac-e86c96e166ee
|
|
.
|
|
Language=Chinese
|
|
Displays or sets the GUID partition table (GPT) identifier or master boot
|
|
record (MBR) signature for the disk with focus.
|
|
|
|
Syntax: UNIQUEID DISK [ID={<DWORD> | <GUID>}] [NOERR]
|
|
|
|
ID={<DWORD> | <GUID>}
|
|
|
|
For MBR disks, you can specify a four-byte (DWORD) value in
|
|
hexadecimal form for the signature.
|
|
|
|
For GPT disks, specify a GUID for the identifier.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A disk must be selected for this operation to succeed. This command works
|
|
on basic and dynamic disks.
|
|
|
|
Example:
|
|
|
|
UNIQUEID DISK
|
|
UNIQUEID DISK ID=5f1b2c36
|
|
UNIQUEID DISK ID=baf784e7-6bbd-4cfb-aaac-e86c96e166ee
|
|
.
|
|
Language=Taiwanese
|
|
Displays or sets the GUID partition table (GPT) identifier or master boot
|
|
record (MBR) signature for the disk with focus.
|
|
|
|
Syntax: UNIQUEID DISK [ID={<DWORD> | <GUID>}] [NOERR]
|
|
|
|
ID={<DWORD> | <GUID>}
|
|
|
|
For MBR disks, you can specify a four-byte (DWORD) value in
|
|
hexadecimal form for the signature.
|
|
|
|
For GPT disks, specify a GUID for the identifier.
|
|
|
|
NOERR For scripting only. When an error is encountered, DiskPart
|
|
continues to process commands as if the error did not occur.
|
|
Without the NOERR parameter, an error causes DiskPart to exit
|
|
with an error code.
|
|
|
|
A disk must be selected for this operation to succeed. This command works
|
|
on basic and dynamic disks.
|
|
|
|
Example:
|
|
|
|
UNIQUEID DISK
|
|
UNIQUEID DISK ID=5f1b2c36
|
|
UNIQUEID DISK ID=baf784e7-6bbd-4cfb-aaac-e86c96e166ee
|
|
.
|