- Add more structures to ntdddisk.h
- Fix more compile errors in disk_new
- disk_new builds but fails to link as classpnp import lib is broken
svn path=/branches/usb-bringup-trunk/; revision=55451
- Implement ResetController and call it before setting up the controller
- Don't disable 64-bit addressing until the BIOS gives up control of the controller
- Comment out manually clearing the SMI interrupt and the BIOS owned flag by request of janderwald
- EHCI no longer hangs for me on real hardware during controller initialization
svn path=/branches/usb-bringup-trunk/; revision=55450
- Check if the report uses a report id
- Fix arrows in USB 2 PS/2 conversion table (Needs more fixing)
svn path=/branches/usb-bringup-trunk/; revision=55440
- Check if attaching to device stack failed. In that case fail the request
[HIDUSB]
- Always set SupriseRemovalOk
[USBCCGP] [HIDCLASS] [USBHUB] [USBSTOR]
- Check if the pdo is still in the pdo list. Only call IoDeleteDevice in that case
svn path=/branches/usb-bringup-trunk/; revision=55429
- Define USBDI_VERSION to 0x500 instead 0x600 because we support none of the Vista APIs so USBD will report the correct version
svn path=/branches/usb-bringup-trunk/; revision=55420
- Add and fix missing exports
- Add UNIMPLEMENTED to unimplemented functions
- Fix completely broken USBD_GetPdoRegistryParameter (which wasn't even exported because somebody made a typo and couldn't figure it out)
- My Linksys USB300M driver now loads but it runs into some unimplemented code paths in usbehci
svn path=/branches/usb-bringup-trunk/; revision=55416
- Add HID devices to the critical device database
- Fixes issues with mouse/keyboard not working until new device wizards are dismissed (USB drives work too)
[UMPNPMGR]
- Fix install failure after the kernel detects a critical device
[NTOSKRNL]
- Finally enable the proper IopResetDevice code
- Driver updating without a reboot for running devices is supported now (if someone will write the GUI)
[USBEHCI][USBOHCI]
- Fix removal bugs
svn path=/branches/usb-bringup-trunk/; revision=55401
- Remove hack of forwarding pdo requests to lower device object of fdo
- Implement handling of reset port and cycle port
- IOCTL_INTERNAL_USB_RESET_PORT / IOCTL_INTERNAL_USB_CYCLE_PORT now need to be implemented in usbhub
svn path=/branches/usb-bringup-trunk/; revision=55396
- Check if the transfer descriptors reported errors and propagate the error in the urb status field
- OHCI now reports error which the class driver are handling
- Allocate device descriptor from non paged pool to prevent possible alignment problems
- Fix checking of completed transfer descriptors
- Fix double freeing of descriptors
- Cleanup endpoints when the halted bit is set by the host controllers
- Check for the endpoint direction in the data descriptor
- Setup descriptor needs buffer rounding set
svn path=/branches/usb-bringup-trunk/; revision=55389
- Use constants instead of hardcoding register offsets. Taken from Haiku
- Elements in HCSP-PORTROUTE are 4 bit entries instead
svn path=/branches/usb-bringup-trunk/; revision=55385
- Write the partition table back after CheckActiveBootPartition() because it could've changed the partition table on a disk with no active partition
- Fixes issues installing ROS on new disks and disks with no active partitions (including USB disks)
svn path=/branches/usb-bringup-trunk/; revision=55382
- In 2012 a long protected natural resource for bugs was shutdown due to popular usb device support demand
- Fix length check in USBD_ParseDescriptors. (PLONG)Descriptor + TotalLength is not the length of the configuration descriptor but twice the configuration descriptor
- Reset found variable in the loop. This fixes finding of interfaces which are not the first one in the configuration descriptor
- Again moving to next usb descriptor was broken. UsbDeviceDescriptor = UsbDeviceDescriptor + UsbDeviceDescriptor->bLength does not move to the next but to next XX descriprors specified by bLength
- Introduced in rev 17382 (14/08/2005)
svn path=/branches/usb-bringup-trunk/; revision=55370
- Wait 100 milliseconds for the port power and insertion to stabilize
- Wait for the 10 millisecond "recovery" period after reset
svn path=/branches/usb-bringup-trunk/; revision=55367
- Use report value when report item bitcount > 1
[KBDHID]
- Print raw report
- KBDHID starts to receive normal keys and modifier keys
svn path=/branches/usb-bringup-trunk/; revision=55364
- Fix bugs in HandleClassEndpoint, HandleClassInterface which always set direction device to host instead of relying to the transfer flags provided
- Allow setup packets w/o a data stage
svn path=/branches/usb-bringup-trunk/; revision=55360
- Implement HidP_GetUsagesEx
- HidP_GetUsagesEx uses HidP_GetUsages with undefined usage page
- Required for hid usb support
- Check if there is a maximum set. In that case verify if a usage maximum has been set and apply it to the currnt usage. Fixes asserts while usb composite device installation (keyboard)
svn path=/branches/usb-bringup-trunk/; revision=55357
- Implement set idle request. The device should only send data when there is actual data. May also fix the mouse debug flood when mouse is ejected
- Not yet supported in OHCI
- Add missing constants
svn path=/branches/usb-bringup-trunk/; revision=55356
