- Remove now unused i386rtl.c (and it doesn't contains RTL functions nowadays).
- Separate PC beep routines out into its own file.
- Also use delay function instead of BIOS interrupts.
- Improve as well the accuracy of KeStallExecutionProcessor() by using the same HW delay function.
This PR enables the developers to include the CJK standard fonts into ReactOS by adding them in Folder modules/optional. This feature is for test purpose only. You may not use the fonts illegally.
The embeddable font files are: mingliu.ttc, simsun.ttc, mssong.ttf, msgothic.ttc, msmincho.ttc, gulim.ttc and batang.ttc.
CORE-9619
- Changes in device detection code:
* Properly check device signature.
* Сorrectly reset the IDE controller.
* Remove check for device type code.
- Fix CD-ROM sector read issue:
* Changed ATAPI packet opcode to be more universal (Some devices may not have READ12 support).
* Always use 2048 bytes as sector size when reading the data from a disc.
* Modify WaitForFlags() to stop polling if the error bit was set.
* Changed timeout to 31 seconds (ATA default value).
- Add more informational messages in DEBUG mode.
- Fix invalid IDE register value.
- Fix registers names.
Tested by Stanislav Motylkov and Daniel Reimer on XQEMU and on real
hardware MS Xbox revision 1.3 with Philips DVD drive.
It has also been tested manually on PC with a SONY DVD drive.
CORE-16628 CORE-16216
Surprisingly this also happens to "fix" random "Invalid Opcode" exceptions in XQEMU.
(But I think it's more like a coincidence... --hbelusca)
CORE-16627 CORE-16216
The first part of PC-98 Port - https://reactos.org/wiki/PC-98
- Add FAT12 file system boot sector for NEC PC-98 series.
- Add a new build target for a PC-98 bootable floppy disk.
- Add a new sub-architecture into config.cmake.
* [FREELDR] Cache the drive geometry in the PcDiskReadLogicalSectorsCHS()
Speed up the loading time a bit.
* [FREELDR] Generalize the cache to all the geometry data + INT 13h extensions-supported status.
The data structure used is "PC_DISK_DRIVE".
- Adapt the associated functions;
- Make DiskGetExtendedDriveParameters() private to pcdisk.c
- Introduce PcDiskDriveNumberToDrive(), that is similar to the XBOX
function XboxDiskDriveNumberToDeviceUnit(), that retrieves a valid
pointer to the cached disk corresponding to the given BIOS DriveNumber.
If needed the cached data gets initialized.
- Make XboxDiskDriveNumberToDeviceUnit() simpler by just returning the
pointer to the corresponding drive, of NULL if there is none.
Co-authored-by: Hermès BÉLUSCA - MAÏTO <hermes.belusca-maito@reactos.org>
CORE-16220 CORE-16216
* Create a new driver.
* Use the functions from the library in xboxdisk.c
Driver now supports PC, Xbox and NEC PC-98.
Co-Authored-By: Hermès Bélusca-Maïto <hermes.belusca-maito@reactos.org>
Add AppliedDPI DWORD registry value 0x00000060 (96 DPI) into HKCU\Control Panel\Desktop\WindowMetrics registry key. For now it does nothing, since saving DPI registry settings is not implemented yet. It's required only for ViStart 8 to be started successfully (with MS VB6 Runtime installed and wshom.ocx replaced). CORE-13877
Update BIOS_MEMORY_MAP and PcMemGetBiosMemoryMap() from ACPI 6.2-A to ACPI 6.3.
Co-Authored-By: Hermès Bélusca-Maïto <hermes.belusca-maito@reactos.org>
PR #2101 shows desktop.ini files on Desktop. I want to hide them.
- Add "ShowSuperHidden" setting to Explorer.
- Add SHCONTF_INCLUDESUPERHIDDEN flag.
- Support SHCONTF_INCLUDESUPERHIDDEN in Explorer.
CORE-10045
Add "Command Prompt here" menu item to the Right-click menu of normal folders and drives. Currently, this menu item doesn't work correctly because of the bug of pushd. CORE-12150
Triggered by a fix attempt by M.Harmstone in PR #1905.
- Introduce #defines and helper functions so as to initialize the
descriptors in a human-readable and tractable way, without magic values.
- Rework some comments.
- Document what the changes are in (Longhorn and) Vista+.
Data has been obtained through using the WinDbg command: dg 0x00 0xFF
(for example), that lists all the selectors from 0x00 to 0xFF included.
See https://docs.microsoft.com/en-us/windows-hardware/drivers/debugger/dg--display-selector-
for more details.
- Implement support for the "RDIMAGELENGTH" and "RDIMAGEOFFSET" boot
options. Fixes CORE-15432.
- Separate the initialization of the global gInitRamDiskBase /
gInitRamDiskSize variables from the FreeLdr command-line, and the
actual initialization of the internal variables of the RamDisk.
The latter are initialized via calls to RamDiskInitialize().
- Implement 'SeekRelative' mode in RamDiskSeek().
- Make RamDiskLoadVirtualFile() internal function that gets called by
RamDiskInitialize(), and we use the latter in the NT loader instead.
Basically it appeared that without this fix, the CPU was somehow residing
in an inconsistent state, that made it crash when a full 16-bit real-mode
to 32-bit protected mode transition occurred. (Encountered when trying
to load Linux, see problem description below.)
In that situation, Bochs reports that the CPU is in "compatibility mode".
The fix is based from information from Fig.1-6 "Operating Modes of the
AMD64 Architecture" (page 12) and Chapter 14 (pages 429-446) of the
"AMD64 Architecture Programmer’s Manual Volume 2: System Programming"
https://www.amd.com/system/files/TechDocs/24593.pdf
*** THE PROBLEM ***
When booting Linux using x86 FreeLdr everything goes well.
When trying to do the same using x64 FreeLdr, the Linux code (both the
boot sector, the setup sector and the main kernel contents) is all
correctly loaded and relocated in memory as in the x86 case. We then pass
control to the decompressing code that appears to succeed. However, once
it has finished and "Parsing ELF file..." step has been run, the next
step "Booting the kernel..." crashes with a CPU Triple-Fault.
This problem **DOES NOT HAPPEN** when booting from GRUB.
Log excerpt from Bochs:
<snip>
00089459736i[BIOS ] Booting from 07c0:0000
00089782775i[SER ] com1: FIFO enabled
00095994535i[BIOS ] int13_harddisk: function 41, unmapped device for ELDL=81
00095998517i[BIOS ] int13_harddisk: function 08, unmapped device for ELDL=81
00397139785i[BIOS ] KBD: unsupported int 16h function 03
00397143625i[BIOS ] *** int 15h function AX=e980, BX=0000 not yet supported!
00523008104e[CPU0 ] interrupt(long mode): vector must be within IDT table limits, IDT.limit = 0x0
00523008104e[CPU0 ] interrupt(long mode): vector must be within IDT table limits, IDT.limit = 0x0
00523008104i[CPU0 ] CPU is in compatibility mode (active)
00523008104i[CPU0 ] CS.mode = 32 bit
00523008104i[CPU0 ] SS.mode = 32 bit
00523008104i[CPU0 ] EFER = 0x00000500
00523008104i[CPU0 ] | RAX=00000000e0000011 RBX=0000000000000000
00523008104i[CPU0 ] | RCX=0000000000000000 RDX=0000000000000000
00523008104i[CPU0 ] | RSP=00000000004f8000 RBP=000000000082e003
00523008104i[CPU0 ] | RSI=0000000000099800 RDI=00000000c0611000
00523008104i[CPU0 ] | R8=0000000000109000 R9=0000000000009020
00523008104i[CPU0 ] | R10=00000000000007e3 R11=000000000000e958
00523008104i[CPU0 ] | R12=0000000000000000 R13=0000000000000000
00523008104i[CPU0 ] | R14=0000000000000000 R15=0000000000000000
00523008104i[CPU0 ] | IOPL=0 id vip vif ac vm RF nt of df if tf SF zf af PF cf
00523008104i[CPU0 ] | SEG sltr(index|ti|rpl) base limit G D
00523008104i[CPU0 ] | CS:0010( 0002| 0| 0) 00000000 ffffffff 1 1
00523008104i[CPU0 ] | DS:0018( 0003| 0| 0) 00000000 ffffffff 1 1
00523008104i[CPU0 ] | SS:0018( 0003| 0| 0) 00000000 ffffffff 1 1
00523008104i[CPU0 ] | ES:0018( 0003| 0| 0) 00000000 ffffffff 1 1
00523008104i[CPU0 ] | FS:0018( 0003| 0| 0) 00000000 ffffffff 1 1
00523008104i[CPU0 ] | GS:0018( 0003| 0| 0) 00000000 ffffffff 1 1
00523008104i[CPU0 ] | MSR_FS_BASE:0000000000000000
00523008104i[CPU0 ] | MSR_GS_BASE:0000000000000000
00523008104i[CPU0 ] | RIP=0000000000409327 (0000000000409327)
00523008104i[CPU0 ] | CR0=0xe0000011 CR2=0x0000000000409327
00523008104i[CPU0 ] | CR3=0x005b5000 CR4=0x000000a0
00523008104i[CPU0 ] 0x0000000000409327: (instruction unavailable) page not present
00523008104p[CPU0 ] >>PANIC<< exception(): 3rd (13) exception with no resolution
<snip>
