- Set up periodic threshold (90 %)
- Add function to retrieve interrupt endpoints
- Add function to retrieve specific descriptors from interface. These are used by HID devices such as mice / keyboards
- Add function to retrieve interrupt interval
- Enqueue all endpoint descriptors at the end of the associated queue
- Only notify hardware of insertion when it is an bulk / control request
- Scan interrupt endpoint list to find the completed transfer descriptor
- Add debugging function to print out linked endpoint descriptors
- Interrupt transfers are now implemented.
- Tested in Windows XP SP3 + Vbox 4.04 + Microsoft 5-Button Mouse. The HID mouse installs, initializes and starts up. Unfortunately the mouse does not work as expected yet
svn path=/branches/usb-bringup/; revision=51922
- Remove dead code
- Silence traces
- Pass status & DoneHead as parameters to dpc routine
- Move IUSBRequest cleanup code into new function and use it for bulk / control transfer cleanup
- Fix bugs in AllocateEndpointDescriptor. It did not take the device address into account. It also did not respect the direction of the descriptor
- Implement support for bulk transfer requests
- Handle irp completion in CompletionCallback
- Tested in Windows XP SP3 + Vbox 4.04 + USB2.0 disabled + ReactOS usbstor + USB mass storage device
- OHCI Mass storage support is now also ready
- Next interrupt transfers
svn path=/branches/usb-bringup/; revision=51917
- Add glue code for supporting iso transfers
- Remove dead from Handle
- Remove broken asserts
- Add support for string descriptors
- Add support for class specific endpoint requests (Needs be ported to usbehci)
- Link to usbd driver
- Add support for retrieving string descriptor
- Rewrite configuration descriptor handling in IUSBDevice. New code is smaller, smarter and handles a lot more cases. Needs to be ported to usbehci
- Wrap usbdlib.h include in extern c macro, it has c linkage
- Control transfers should now work
- Need to implement support for isochronous / bulk / interrupt transfers until functional
- Tested with Bluetooth USB Stick (multi function, interrupt / bulk / control / isochronous) / USB Microphone (isochronous & control) in XP SP3
svn path=/branches/usb-bringup/; revision=51900
- Add sanity checks
- Preserve command status value when notifying the hc that a control / bulk endpoint was added
- Re-enable root hub notification interrupt when reset port has been completed
- Dispatch processing to USBQeueu when DoneHead event arrives
- Scan endpoints to find the logical endpoint which was completed by the hardware
- Signal completion to IUSBRequest by calling CompletionCallback
- Create a final transfer descriptor which is linked to the endpoint descriptor
- Control transfers now appear to be working (Device retrieves device descriptor / configuration descriptor and succeeds in setting device address)
- Configuration parsing code needs more work now (currently fails there due to invalid / unexpected configuration descriptor from device)
svn path=/branches/usb-bringup/; revision=51888
- Enable global power mode
- Wait untill reset is complete
- Clear reset complete bit when reset is done
- Enable port
- Reset port now works
- USBOHCI still hangs after adding first control request, needs more investigation
svn path=/branches/usb-bringup/; revision=51883
- Start implementing control transfers
- Move initialization of usb queue after the bulk / control head endpoints have been created
- Add interface functions to retrieve bulk / control head endpoint descriptors
- Add macros for setting transfer descriptors field (taken from Haiku)
- Partly implement IUSBQueue::AddUSBRequest for control / bulk transfers
- Create endpoint descriptor for control request and link setup descriptor to it
- Link setup descriptors to data descriptor / status descriptor
- WIP (needs fixes)
svn path=/branches/usb-bringup/; revision=51864
- Fix bug in calculating offset of status register
- Start implementing deferred processing routine
- Signal status change when new device is arrived
- Implement basic GetPortStatus
- Start implementing SetPortFeature, ClearPortStatus
- ResetPort not yet fully working, WIP
svn path=/branches/usb-bringup/; revision=51858
- Add check that controller is functional state
- enable interrupts after the controller has been started
- partly implement isr routine
svn path=/branches/usb-bringup/; revision=51852
- Start of OHCI support
- Based on new usbehci driver and Haiku USB Stack
- Driver initializes the controller and retrieve number of ports
svn path=/branches/usb-bringup/; revision=51851
- Pass memory manager to USBQueue object
- Fix bug in memory manager which did not check if an allocation equals page size
- Implement interrupt queue head array with frequencys of 1ms up to 32ms
- Store queue heads in the sync schedule array
- WIP
svn path=/branches/usb-bringup/; revision=51826
- Add error handling to USBSTOR_CSWCompletionRoutine for errors that can be recovered via reset of pipe/port/controller. Only pipe reset is attempted. WIP.
svn path=/branches/usb-bringup/; revision=51808
- Implement retrieving serial number from device
- Use serial number to format instance id and retrieve in StorageDeviceProperty requests
- Silence traces
svn path=/branches/usb-bringup/; revision=51770
- Add asserts
- Rewrite queue methods to accept the FDO only
- Fix multiple synchronization bugs
- Don't start next irp before current irp has completed
- Use contiouslogicalbytes blocks from srb
- Should fix race conditions
svn path=/branches/usb-bringup/; revision=51764
- Silence warnings
- Silence traces
- Add asserts
- Add code to detect usb reset in progress. In that case cancel the request
- Add more code to synchronize urb action
- WIP, still hangs are observed
svn path=/branches/usb-bringup/; revision=51759
- Start implementing error handling.
- On errors use a worker thread to attempt a recovery. If successful restart the operation that failed.
- If STALL_PID is received reset the pipe of the device.
- Not entered into code path yet. WIP.
svn path=/branches/usb-bringup/; revision=51754
- USBSTOR_SendRequest: The buffer for read/write may not be NonPagedPool, which is documented as a requirement for using MmBuildMdlForNonPagedPool. Also locking the buffers pages is also not an option as the routine is called at DISPATCH_LEVEL.
It so happens that Irp->MdlAddress is valid for read/write operations. Use it instead of procedure above.
- Add a sanity check to make sure the Mdl does describe the transfer buffer.
Fixes IRQL_NOT_LESS_OR_EQUAL bugcheck in windows. These changes also may fixed writing to device.
svn path=/branches/usb-bringup/; revision=51752
- Fix bug in read command, which uses wrong format. LBA address is stored in the CDB10 struct
- Don't build the mdl for nonpaged pool if the driver passes an mdl (i/o paging requests)
- Usbstor can now list disk contents and browse files when used in Windows XP
- Need to implement SCSIOP_WRITE to write files
svn path=/branches/usb-bringup/; revision=51694
- Handle SCSIOP_MEDIUM_REMOVAL
- Handle paging i/o requests. These request don't provide a data buffer in the srb, but the buffer is stored in the irp' mdl
- Fix the hack for unimplemented Mode Sense command
- Usbstor now completes initializes and receives read requests
- Still need to fix read request, as Windows XP fails to recognize the disk format, WIP
svn path=/branches/usb-bringup/; revision=51693
- Add a check at USBSTOR_FdoHandleStartDevice to make sure the device uses Bulk Transfers.
- Use macros for initializing the Urbs. The macros ensure that the proper fields of the URB are set correctly.
Fixes failing of getting device descriptor and getting devices BlockLength.
svn path=/branches/usb-bringup/; revision=51691
- Only get the string descriptors if they are available. Fixes crash when using usb mouse and keyboards in windows.
svn path=/branches/usb-bringup/; revision=51688
- Modify BuildBulkTransferQueueHead to support TransferBufferLengths larger than PAGE_SIZE * 5.
- Acquire a SpinLock before adding QueueHeads to AsyncList and PendingList.
- Dont request a new QueueHead for incomplete transfers in QueueHeadCompletion, as the memory for the just completed QueueHead has not been released yet. Doing so overwrites the m_TransferDescriptor[x] members with new address resulting in memory leaks. Instead request a new QueueHead after the QueueHead has been freed in QueueHeadCleanup.
- Fix a bug where a QueueHead was removed from the m_CompletedRequestAsyncList instead of the m_PendingRequestAsyncList.
- Temporary hackfix InternalCalculateTransferLength to return the TransferBufferLength. This hack will be removed as soon as possible.
- With these changes the hub and ehci driver allow viewing content of and transfers to/from usb disks.
svn path=/branches/usb-bringup/; revision=51684
- Save PortNumber in child device extensions as its needed when PNP request device capabilities.
- Handle IOCTL_INTERNAL_USB_SUBMIT_URB request by creating a new Irp and passing the Urb down to the miniport.
- Now working with our ehci driver, we at least see a usb driver and can browse directory in Windows, though doing so results in assert as ehci doesnt support transfers over 5 Pages yet. Fix coming soon.
svn path=/branches/usb-bringup/; revision=51672
- When clearing feature port reset, remove the flag from Change and if the port is hardware enabled set the enable flag in Status.
- When checking port status, if Change has any flags set an SCE request most be completed. Verified while writing usbhub driver in xp.
- Probably fixes a case where an endless loop of completing SCE requests.
svn path=/branches/usb-bringup/; revision=51642
- Implement constructing CompatibleIds string using device descriptor. However, if the Class of the device descriptor is 0, then Class, SubClass and Prot which make up this string must come from the Interface.
- Change Ids and Descriptions to Unicode Strings.
- Move the creating of Id strings to one place, CreateDeviceIds, and called it at device creation.
svn path=/branches/usb-bringup/; revision=51641
- Some devices implement a default Language, LangId of 0. Some do not. Use LangId 0x0409 (English) until LangId is implemented.
- Remove an unused variable.
svn path=/branches/usb-bringup/; revision=51622
- The lower level driver completes the SCE IRP whenever the change state has been modified for a port. When handling the SCE IRP completion only check for flags in change state. The Change flags must be cleared else the hub driver will get non stop SCE IRP completions.
- Allocate IRP from Pool vice calling IoAllocateIrp. Dont free the IRP in the completion routine as the port driver, oddly, frees them.
- GetUsbDeviceDescriptor: Remove use of MDL and use only buffer instead to make our new usbehci happy.
- When calling the interface routines, correctly use the BusContext returned from the interface instead of the RootHubPdo. This worked on windows as it just happened they were the same.
- Implement RootHubInitCallbackFunction, which only job currently is to send the first SCE IRP.
- For Start Device for child device objects fake success for now. Will be implemented later.
- Implement returning IRP_MN_QUERY_IDs, IRP_MN_QUERY_DEVICE_TEXTs and IRP_MN_QUERY_BUS_INFORMATION.
- Add basic handling for IRP_MJ_POWER.
- Misc code changes.
svn path=/branches/usb-bringup/; revision=51620
- Implement retrieving drive capacity
- Use constant from scsi.h instead of defining own format
- Don't reset returned parameters length to zero, as ioctl handler might set it
svn path=/branches/usb-bringup/; revision=51608
- Make DeviceId generation to match ms usbstor
- Don't hardcode the device type in USBSTOR_PdoHandleQueryHardwareId
- Don't hardcode device type in USBSTOR_PdoHandleQueryCompatibleId
- Hackfix generation of instance id
- Add comments
- Cleanup code
- Usbstor now receives ioctl from disk.sys
svn path=/branches/usb-bringup/; revision=51582
- Add UsbDeviceHandle to child device extensions structure to be passed with URB requests.
- Reimplement the Worker Thread DeviceStatusChangeThread called on SCE completion. Each SetFeature and ClearFeature resend SCE request.
Only create the usb child device if the PortStatusChange member of the device extensions was modified.
- Implement CreateUsbChildDeviceObject used for creating a deviceobject for the USB device and initializing it.
- Implement GetUsbStringDescriptor for getting DeviceId, TextDescription and InstanceId from USB Device.
- Move the initial QueryStatusChangeEndpoint to after the hub device receives start pnp.
- USBHUB driver is now back to the same functionality of previous version. Showing the device wizard for connected devices.
svn path=/branches/usb-bringup/; revision=51581
- Rewrite hardware id / instance id matching
- Implement support for compatible id
- UsbStor still not attached to disk.sys, needs more research on how to get this done
svn path=/branches/usb-bringup/; revision=51580
- Change parameter name for DeviceObject in functions to clearify which device object is to received IRPs.
- Fix a typo in GetPortStatusAndChange that caused the function to return nothing for status and change.
- Call QueryStatusChangeEndpoint to send the first SCE request in Query Bus Releations.
- Complete implementation of StatusChangeEndpointCompletion. Queue a work item for DeviceStatusChangeThread, which will be used to initialize the usb device and create related device objects.
svn path=/branches/usb-bringup/; revision=51576
- Don't free device descriptor if it failed to acquire it
- Don't move out of usb configuration array. Found by special pool
- Fix bug when storing interface information which lead to a overwrite
- Implement retrieving generic type for device
- Fix bugs in QueryDeviceId
- Implement querying hardware ids
- Implement querying instance ids
- With these changes, usbstor now initializes and create pdo, which is also enumerated
- Needs more code / fixes so that disk.sys attaches to usbstor
- WIP
svn path=/branches/usb-bringup/; revision=51575
- Invoke status change callback at passive level
- Fill out usb descriptor struct instead passing everything in char array
- Use 1 byte interrupt endpoint packet size for hub for now
- Fill in interface information when SelectConfiguration request is passed. Fixes sce callback and pool corruptions
- Return device descriptor in USBHI_QueryDeviceInformation
- Tested in WinXP with special pool enabled & overrun support
svn path=/branches/usb-bringup/; revision=51572
- Start work on reimplementing UsbHub driver.
- Implement SubmitRequestToRootHub, QueryStatusChangeEndpoint, QueryInterface, GetPortStatusAndChange, SetPortFeature and ClearPortFeature.Handle QueryBusRelations.
- Partially implement PNP handling for FDO. When starting the device get all the information about the RootHub the driver will need and enable Power on all ports.
- Partially implement PNP handling for PDO, QueryId and QueryDeviceText.
- WIP
svn path=/branches/usb-bringup/; revision=51569
- Store number of bytes transferred in the transfer descriptors
- Perform queue head completion when the door bell ring has been acknowledged. Fixes race condition between multiple irps in the async list
- Fix calculation of transfer length when the request is an bulk in operation
- Use EndPointDescriptor member to access transfer type / pid direction
- Use MmGetSystemAddressForMdlSafe to retrieve system address for urb buffer
- Fix check if first transfer buffer finishes on first size if the size is of page_size
- With these changes and little luck and good weather, usb mass storage devices have been seen to work in Windows XP SP3
- Code inspired of mjmartin usbehci driver and Haiku's usb stack
svn path=/branches/usb-bringup/; revision=51506
- Port URB_FUNCTION_CLASS_INTERFACE from mjmartin usbehci driver
- Fix typo in interface declaration
- Disable assert for now
- Return irp status pending when irp is added to the queue
- Fix bug in InternalGetPidDirection
- More work on the bulk transfers, not yet working
svn path=/branches/usb-bringup/; revision=51501
- Fix a type causing CommitIrp to fail.
- Add a sanity check in StatusChangeEndpointCallBack to check that a pending SCE irp is queued.
- Start Implementing Bulk Transfers. Needs more work.
svn path=/branches/usb-bringup/; revision=51493
- Set the NakCountReload to 0 in the QueueHead that is set in the Async register, as this is a dead QueueHead marked as halted and does not need it.
- Set the Async register in StartController. Note: The Async and Periodic registers can only be modified when the controller is stopped.
- Driver now works in Qemu.
svn path=/branches/usb-bringup/; revision=51491
- hub_controller.cpp: Change RtlSetBit and RtlClearBit to RtlSetBtis and RtlClearBits for Win2k compatibility.
svn path=/branches/usb-bringup/; revision=51488
- Implement retrieving device / configuration descriptor for usb devices
- Based on mjmartin usbehci driver
- Mass storage device found wizard now pops up (fails to install - WIP)
svn path=/branches/usb-bringup/; revision=51478
- Move error checking if controller reported an error inside the door bell ring check block
- Extend interface of IUSBRequest to include DeviceAddress, which is needed to retrieve configuration descriptor of newly set address
- Allocate CtrlSetup from nonpaged pool
- Release setup packet on cleanup
- Devices now receive an device address
- Currently asserts while retrieving configuration descriptor as this code path is not yet existant
*** Assertion failed: Urb->UrbHeader.UsbdDeviceHandle == NULL
*** Source File: d:\usb-bringup\drivers\usb\usbehci_new\hub_controller.cpp, line 1118
svn path=/branches/usb-bringup/; revision=51477
- Change interface to return real async queue head
- Set the async queue head register after the controller has been started
- Enable async queue in StartController
- Port DumpDeviceDescriptor from mjmartin usbehci driver
- Remove pseudo queue head from usb queue, instead use the real async queue head exported from IUSBHardwareDevice
- Get physical address for transfer data in BuildControlTransferQueueHead
- Retrieving device descriptor now ~works, currently stops at setting device address (needs more work)
svn path=/branches/usb-bringup/; revision=51476
- Check if the current request type is supported (currently only control is supported, bulk will be implemented soon)
- Fix bug in IUSBRequest::CreateQueueHead
- Code runs now until first device descriptor get request (async / periodic queue not yet enabled)
- mjmartin usbehci status not yet reached
- Let the fun now begin ;)
svn path=/branches/usb-bringup/; revision=51474
- Cache port status & port change settings because it appears that some ehci controllers do not store the status reset register bit correctly
- This commit is a temporary solutions, needs to be reworked
- Return correct status from HandleClassOther
- Handle IOCTL_INTERNAL_USB_SUBMIT_IDLE_NOTIFICATION to return status success
svn path=/branches/usb-bringup/; revision=51473
- Return the physical address of the async queue head in CUSBHardwareDevice::GetAsyncListRegister
- Remove superflous entries from queue head structure, they are processed within IUSBRequest class
- Remove USBHI_GetPortHackFlags, this function has been deprecated
- Add interface functions for IUSBRequest / IUSBQueue
- Callback into IUSBQueue when a hardware interrupt arrives
- Implement callback function to check for completed queue heads / free completed queue head depending on the Async Advance interrupt bit
svn path=/branches/usb-bringup/; revision=51466
- Create member for storing the request object
- Add interface function which is invoked when the queue head should be freed
- Add support functions which deal with completed queue heads
svn path=/branches/usb-bringup/; revision=51440
hub_controller:
- Implement StatusChangeEndpointCallBack called by HardwareDevice class when port status has changed on controller.
- Move Status Change Endpoint query code to IQueryStatusChageEndpoint as it is also needed by StatusChangeEndpointCallBack.
usb_request:
- Implement InternalCreateUsbRequest.
usb_queue:
- Implement CreateUsbRequest and AddUsbRequest
hardware:
- Implement GetAsyncListRegister and GetPeriodicListRegister.
- Implement SetStatusChangeEndpointCallBack for setting callback and context. Call the callback when a port status changes.
- Initialize the UsbQueue after creating the AsyncQueueHead, as the UsbQueue calls will call back with GetAsyncListRegister.
svn path=/branches/usb-bringup/; revision=51407
- Fix warning because comparing signed vs unsigned
- Implement function for retrieving the device descriptor
- Implement function for retrieving a configuration descriptor (including contained interface descriptor and endpoint descriptor)
- Cleanup interface for IUSBRequest:
- When caller initializes IUSBRequest with an IRP, then the operation mode is asynchronously. Therefore when the request is completed, IUSBRequest::ShouldReleaseRequestAfterCompletion will return true, which makes IUSBQueue call Release on IUSBRequest
- When the caller initializes IUSBRequest with an setup packet, the operation mode is synchronously. After submitting the IUSBRequest to queue, the caller should call IUSBRequest::GetResultStatus. This function will then block untill the operation has been completed. However, the caller needs to call Release() as those requests are not cleaned up by the IUSBQueue
svn path=/branches/usb-bringup/; revision=51406
- Initialize the MemoryManager only after allocating a CommonBuffer to pass to it.
- Create a QueueHead to put into the AsyncList Register.
svn path=/branches/usb-bringup/; revision=51402
- hub_controller: Implement Status Change Endpoint for RootHub.
Handling the URB can return STATUS_PENDING, as in the new SCE code. Check for this before completing the Irp.
Uncomment calls to PortStatus, SetPortFeature, and ClearPortStatus now that they are implemented.
- For function receiving a port number check that its not larger than the actual number of ports on the controller.
svn path=/branches/usb-bringup/; revision=51401
- Move USB_REQUEST_SET_FEATURE / USB_REQUEST_GET_FEATURE flags to header file.
- Remove QueueHead and Descriptor creation as its in UsbRequest.
- Move DMACommon Buffer allocation back to UsbHardwareDevice class.
- Implement Port Handling functions GetPortStatus, ClearPortStatus and SetPortFeature.
- Implement GetUSBQueue for returning pointer to UsbQueue and GetDMA to return DMAMemoryManager.
- Fix a typo in one of the defines for Port Register Flags.
svn path=/branches/usb-bringup/; revision=51397
- Use PQUEUE_HEAD as the Head of pending list and Async (Active) list vice using PLIST_ENTRY.
- Implement linking/unlinking a QueueHead to these Head QueueHeads.
- Implement chain linking/unlinking of QueueHeads. Thr plan being to used these functions during DMA operations to pull a number of QueueHeads from the pending list to place into the Async list for execution.
- Will look for optimization in these functions later.
svn path=/branches/usb-bringup/; revision=51390
- Use LIST_ENTRY in QueueHeads and Descriptors vice Next and Previous Pointers.
- Add functions to interface for setting AsyncListRegister and PeriodicListRegister.
- USBHardwareDevice: Initialize USBQueue when handling PNPStart.
- USBQueue: Allocate Common Buffer and use it to Create and Initialize DmaMemoryManager object.
- USBQueue: Implement CreateQueueHead and CreateDescriptor.
svn path=/branches/usb-bringup/; revision=51388
- Update interfaces with new methods needed for UsbHardWare class.
- Remove GetDmaMemoryManager as the DmaMemory will only be needed by UsbQueue class.
- GetDeviceDetails: Only fill in a parameter if its not null.
- Start implementing UsbQueue class.
svn path=/branches/usb-bringup/; revision=51386
- Implement IRP_MN_QUERY_DEVICE_RELATIONS for hub controller object
- Implement stub handler for URB_FUNCTION_CLASS_OTHER, URB_FUNCTION_SELECT_CONFIGURATION
- Partly implement URB_FUNCTION_GET_STATUS_FROM_DEVICE
- Return success from unimplemented USBHI_Initialize20Hub routine
- based on mjmartin usbehci driver
- Tested in Windows XP SP2
svn path=/branches/usb-bringup/; revision=51385
- Setup a default device descriptor for the root hub and initialize it with vendor & product id
- Partly implement URB_FUNCTION_GET_DESCRIPTOR_FROM_DEVICE, URB_FUNCTION_CLASS_DEVICE
- based on mjmartin usbehci
svn path=/branches/usb-bringup/; revision=51384
- Fix bug in CDMAMemoryManager initialization, which calculated the bitmap length wrong
- Create interface IUSBDevice, which will be used to abstract connected usb devices
- Implement support functions for the device interface.
- Implement USBHI_CreateUsbDevice, USBHI_InitializeUsbDevice, USBHI_GetUsbDescriptors, USBHI_RemoveUsbDevice, USBHI_GetExtendedHubInformation, USBHI_RootHubInitNotification, USBHI_SetDeviceHandleData, USBDI_GetUSBDIVersion, USBDI_IsDeviceHighSpeed
- Partly implement USBHI_QueryDeviceInformation
- Based on mjmartin usbehci
svn path=/branches/usb-bringup/; revision=51372
- Implement IDMAMemoryManager interface, with IDMAMemoryManager::Allocate, IDMAMemoryManager::Free
- Fix interface of IDMAMemoryManager
- Will be used by IUSBHardwareDevice
svn path=/branches/usb-bringup/; revision=51369
- Add reference count when the hub controller is created. Necessary to prevent the controller from getting deleted when the hub driver performs interface reference removes
- Implement IRP_MN_QUERY_ID, based on mjmartin ehci driver
- Fix bug in IRP_MN_QUERY_BUS_INFORMATION, it is supposed to return a PNP_BUS_INFORMATION not a simple guid
- Implement IOCTL_INTERNAL_USB_GET_DEVICE_HANDLE, IOCTL_INTERNAL_USB_GET_ROOTHUB_PDO, IOCTL_INTERNAL_USB_GET_HUB_COUNT based on mjmartin ehci driver
- Add interfaces for communicating with the hub driver
- Dispatch internal device requests not wmi requests (EHCI_Dispatch)
svn path=/branches/usb-bringup/; revision=51368
- Change VendorId and DeviceId to the same size as PciConfig members, PUSHORT.
- Add support function GetBusInterface.
- Implement GetDeviceDetails and ResetPort.
svn path=/branches/usb-bringup/; revision=51367
- Add flags for Port Status Control Register and remove structiures for Port Status Control Register.
- Remove USB Status Register and use the flags instead.
- Remove functions that are not used and never will be.
- Implement InterruptServiceRoutine and Deffered Procedure Routine.
- Partially implement port status change to detect device insert and removal.
svn path=/branches/usb-bringup/; revision=51366
- Add flags and structures needed for communicating with controller and handling schedules.
- Add support routines for modifying operational registers on controller.
- Implement getting the controller capabilties, starting and stopping the controller.
svn path=/branches/usb-bringup/; revision=51365
- Create Interface IDispatchIrp which is used to handle ioctl requests
- Partly implement IHubController interface
svn path=/branches/usb-bringup/; revision=51355
- Define tag for allocations
- Fixes assert hit in ReactOS
- Fix typo in IHubController interface declaration
svn path=/branches/usb-bringup/; revision=51353
- Fix IOCTL_GET_HCD_DRIVERKEY_NAME implementation
- Now needs IOCTL_USB_GET_ROOT_HUB_NAME to get further in usbview
- Tested in Windows XP SP2
svn path=/branches/usb-bringup/; revision=51350
- Build fix#1 for mingw
- Define cxa_pure_virtual which is required that gcc is aware that it should really use the libc++ instead of falling back to libc
svn path=/branches/usb-bringup/; revision=51348
- Implement CHCDController::Initialize, CHCDController::HandlePnp for PDO / FDO,
- Partly implement CHCDController::HandleDeviceControl
- Based on mjmartin usbehci sources
- Driver now startups and acquires pnp resources
- Fails in HandleDeviceControl with IOCTL_GET_HCD_DRIVERKEY_NAME when usbview is launched
- Tested in Windows XP SP2 + Vmware Server 2.0.2
svn path=/branches/usb-bringup/; revision=51343
- Create empty USB EHCI driver in c++
- Design & review the interfaces with mjmartin
- Create stubs for creating IUSBHardwareDevice / IHCDController classes
- Implement DriverEntry, EHCI_AddDevice and EHCI_Dispatch
svn path=/branches/usb-bringup/; revision=51335
- Re-implement DMA buffer routines. It is now faster and consumes less memory overhead per allocated memory block.
- IoGetDeviceProperty needs a PDO
- Add few comments
- No need to clear buffer twice in CreateQueueHead / CreateDescriptor
svn path=/branches/cmake-bringup/; revision=51324
- Fix wmi and drmk entry points.
- Don't use both reactos and wine debug headers in iphlpapi. Fixes the macro redefinition warnings.
svn path=/branches/cmake-bringup/; revision=50353
Add stubs file to source automatically.
Gcc: fix set_rc_compiler() so that it doesn't conflict with custom_incdefs().
svn path=/branches/cmake-bringup/; revision=49893
- use correct link script file for freeldr and setupldr
- use correct definition file for advapi32
- don't specify name to add_bootcd_target if not needed
- portcls is not a kernel mode driver
- Disable stcall fixup, except for mesa32 which requires it
- remove an useless file from minihal, add a forgotten one to freeldr
svn path=/branches/cmake-bringup/; revision=49615
- "cmake gracefully handles def files as source files" You mean it gracefully ignores them, right ?
- Fix the kernel and class2 exports. More to come.
- Fix imaadp32.acm
svn path=/branches/cmake-bringup/; revision=49367
- rewrite spec2def macro because
1. cmake gracefully handles def files as source files
2. cmake gracefully handles autogenerated files as source
3. it did not take into account the fact that all shared libraries haven't the .dll extension
svn path=/branches/cmake-bringup/; revision=49358
- add macros add_cab and add_cab_target to add files to reactos.dff
- add bootcd target
- make use of these macros to create bootcd and livecd
Bootcd works and install things, but 2nd stage fails booting. We need debug symbols!!!
svn path=/branches/cmake-bringup/; revision=49347
- fix a whole bunch of function prototype. (how does t even work in trunk?)
[CMAKE]
- add classpnp.sys to build
svn path=/branches/cmake-bringup/; revision=49345
- add kernelmodedriver module type
- add set_cpp macro, which takes care of all c++ stuff for you
- hackfix stlport headers for c++ kernel mode modules.
- complain about explorer
- solitaire, telnet and uniata now build happily against stlport
svn path=/branches/cmake-bringup/; revision=49141
Add minicd target.
This partial bootcd target produces a minicd iso,
able to start the install process to the cabinet installation page.
svn path=/branches/cmake-bringup/; revision=49072
- Make static libs out of the idl files.
- Improve wshirda, wshtcpip and wsock32.
- Include bmfd into build.
svn path=/branches/cmake-bringup/; revision=48956
Generalize CMAKE_C_CREATE_SHARED_LIBRARY and remove per project instances.
Thanks to Amine for regexxer tool discovery ;)
svn path=/branches/cmake-bringup/; revision=48804
