- Make the Create*Partition helpers take a size in bytes, not in sectors.
This allows them to be easier to use by the caller, alleviating the
need for making the size conversion into sectors. Instead it is done
internally by the helpers.
- Introduce helper macros to easily retrieve the size of a partition
entry or a disk in bytes, from their internal representation in number
of sectors.
- The 'AutoCreate' variable being USETUP-specific, remove it from the
PARTENTRY structure and use instead a flag set into the 'New' member.
- Rename IsDiskSizeValid to IsPartitionLargeEnough, to better describe
what the function is for.
Do not do that yet for extended partitions (containers).
This is possible, because when creating partitions, we do that on
unpartitioned space that is already "tagged" as either being "logical"
or not, and the partition style is inherited from that.
The resulting code is simpler, yet working as it should.
This will also help in the future for supporting other platforms, where
the concept of "primary", "extended" and "logical" partitions do not
exist (basically all platforms except BIOS-based PC-AT).
This includes:
- the default TimeText;
- the default colors.
They can however be changed by the user at one's convenience, by
explicitly specifying different values.
The upstream driver is not maintained and the file system itself
is in a semi-abandoned state.
Originally imported at 3a3ef631d1
The driver is written by Lee Jae-Hong, updated by Bo Brantén.
ReactOS porting made by Peter Hater and Pierre Schweitzer.
Follow updates at http://www.acc.umu.se/~bosse/
FS Recognizer code is left to keep the FS support as an
installable driver.
CORE-11040
The upstream driver is not maintained and the file system itself
is in a semi-abandoned state.
Originally imported at e308102f4a
The driver is written by Mark W Piper, updated by Bo Brantén.
ReactOS porting made by Peter Hater and Pierre Schweitzer.
Follow updates at http://www.acc.umu.se/~bosse/
FS Recognizer code is left to keep the FS support as an
installable driver.
CORE-11005
Add two hacks in UpdateDiskLayout() and WritePartitions() so that the
disk partition style is consistently set to a known value MBR, especially
when that disk was previously new and uninitialized (RAW).
A proper fix will be developed later when support for GPT is added.
so that they wrap the needed init steps for formatting/chkdsk'ing.
These helpers now accept a PPARTENTRY, together with the usual
formatting/chkdsk parameters. The helpers now determine the actual
NT path to use, and can perform the init steps on the partition
before performing the actual operation.
In particular, FormatPartition() is now made GPT-compliant. The
partition type retrieved by FileSystemToMBRPartitionType() is now
used as a hint for choosing FAT32 over FAT12/16, and only in the
case of a MBR partition that is *NOT* a recognized OEM partition,
it is used for updating the corresponding partition type. (OEM
partitions must retain their original type.)
The OEM partition types we (and NT) can recognize are specified
e.g. in the Microsoft Open-Specification [MS-DMRP] Appendix B
https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-dmrp/5f5043a3-9e6d-40cc-a05b-1a4a3617df32
Introduce an IsOEMPartition() macro to help checking for these types
(its name is based on the Is***Partition() macros from ntdddisk.h,
and from a dmdskmgr.dll export of similar name).
Instead of providing an MBR partition type to InferFileSystem(), make
it call IOCTL_DISK_GET_PARTITION_INFO(_EX) to determine whether the
partition pointed by the path/handle is MBR or GPT. Then, only if it's
MBR, we retrieve its partition type in order to "guess" an adequate file
system name, in case the latter was not recognized already via regular
ways (via GetFileSystemName() / NtQueryVolumeInformationFile()).
- Remove the GetFileSystemNameByHandle() and InferFileSystemByHandle()
functions. Instead, make the other GetFileSystemName*() and
InferFileSystem*() functions accept a HANDLE as an alternative to the
already-existing partition path string. These parameters are exclusive
to each other.
- Rename SetPartitionType() -> SetMBRPartitionType(),
and FileSystemToPartitionType() -> FileSystemToMBRPartitionType()
in order to really clarify what they do (since this code is meant
for MBR partitions only, not GPT ones).
CORE-16274
SETUPLIB:
=========
- Find the system partition initially when we create the list of
partitions.
- Split the old CheckActiveSystemPartition() helper in two helpers:
FindSupportedSystemPartition() and SetActivePartition(). This allows
simplifying slightly the former one, and allows the user, in an
interactive situation, to decide whether the "supported system
partition" found can actually be used or not.
- Remove the "OriginalSystemPartition" hack in the PARTLIST structure.
- Add a note regarding the SystemPartition member in PARTLIST.
USETUP:
=======
- Use the introduced helpers from above. If the "system" partition we
are going to use, in case we install ReactOS on a fixed disk, is *NOT*
the same as the original one (e.g. because it is detected to be not
supported by ReactOS...), display an informative screen to the user
and let him confirm whether or not he wants to change the partition.
If we install on a fixed disk, try to find a supported system partition
on the system. Otherwise if we install on a removable disk, use the
install partition as the system partition instead.
This allows providing a fix for CORE-16274.
SETUPLIB:
=========
- Remove useless HiddenSectors member in PARTENTRY structure.
- InsertDiskRegion() helper returns a BOOLEAN success.
- CreateInsertBlankRegion() helper sets LogicalPartition.
- Simplify the InitializePartitionEntry() helper so that its PartEntry
parameter is clearly the one that is being initialized (i.e. converted
from a blank region to) an actual partition, and use the helper
CreateInsertBlankRegion(). The calculations for the StartSector and
SectorCount are exactly equivalent with the old version of this
function. Also make it return a BOOLEAN success instead.
+ Add some extra validation checks.
+ Adjust CreatePrimaryPartition(), CreateExtendedPartition() and
CreateLogicalPartition() in this regard.
- Better handling of "RAW"-mounted partitions: treat them as
"Unformatted" only if they are RAW *AND* their PartitionType is one of
those associated with FAT file-system. Otherwise we cannot decide
whether they are indeed unformatted or have an unknown file-system on
them, therefore treat them as the latter.
In this regard, the IsSupportedActivePartition() helper should not
look for FileSystem == RAW but instead only look whether the partition
is Unformatted.
This should help with situations similar to the one described in CORE-16274
where a partition with a genuine file-system but not recognized by
ReactOS (because we currently do not have the EXT2/3/4 filesystem
driver loaded during 1st-stage setup due to commit 5a650f6b) and
therefore mounted as RAW, was thought to be unformatted.
USETUP:
=======
- Use the "global" SystemPartition pointer: this is the "system"
partition we will actually use. It can be different from the actual
one of the computer, for example when we install ReactOS on a
removable disk. This allows also to simplify the code.
- Remove the single-used DestinationDriveLetter variable.
- Remove BuildInstallPaths() helper and use InitDestinationPaths()
directly instead.
- Always mention the disk where the partition being formatted is.
- Cleanup old code comments, add assertions here & there...
Nowadays more and more people try to install ReactOS from removable
drives (e.g. USB sticks) onto fixed HDDs, or try to install it into
USB sticks too.
Both fixed and removable drives, as well as partitions on these, are
represented in NT using the same device name format:
\Device\HarddiskM\PartitionN ,
with an increasing disk number M. Using this number for building the
corresponding firmware-specific ARC multi(x)disk(y)rdisk(z) path used
by the NT/ROS loader (FreeLdr, ...) is then prone to error since there
may have been removable drives inserted and accounted for in the
calculation of the disk number. These drives must be correctly
subtracted in order to generate the correct ARC path, valid once all
the removable drives have been ejected (which should also be the
situation seen from the BIOS when booting up, except of course if you
boot on a USB stick).
This problem is now solved. Note that it matters only for the disks
that have also been enumerated by the firmware (BIOS; Int 13h). We
don't have to care about the other drives, since the ARC path will be
of a different format and will not use the disk number (instead, the
SCSI coordinates are used).
We also try to enumerate all the disks found in all the possible disk
adapters and controllers enumerated in the Hardware registry tree
(and that are visible by FreeLdr) in order to cover all.
Finally, we detect whether a disk reports as a "super-floppy", i.e.
an unpartitioned disk with a valid VBR. This is indeed how a standard
floppy disk looks like, or how USB sticks are partitioned on Windows.
Such disk is reported has having only one single partition starting at
the beginning of the disk, with partition number == 0, its type being
FAT16 non-bootable.
This allows us to forbid creating any new partitions on such disks.
Note that accessing either \Device\HarddiskN\Partition0 or Partition1
on such a disk returns the same data.
Note also that on the contrary, regular MBR-partitioned disks would
report at least four partitions entries, instead of just one.
The other improvements are:
- Do *NOT* write any MBR on a disk partitioned as "super-floppy".
CORE-13703
- Fix the computed disk identifier, of format: %08x-%08x-%c .
The numbers are respectively the checksum of the first sector, and
the disk signature. The terminating letter is A or X, depending
whether the first sector ends with 0x55AA/0xAA55 or not (see also
commit 5053f1f5).
- Warn if the user attempts to install ReactOS on a disk that is not
visible by the firmware of his computer, because it may not be
bootable.
- Add also some validation ASSERTs and simplify the code here and there.
- The installation partition is called "InstallPartition", while the
global "CurrentPartition" is the disk region currently selected in
the partition UI list, on which prtitioning operations are effectued.
- Extend CheckActiveSystemPartition() to use an optional alternative
disk or partition in case the actual system partition (present in the
first disk) cannot be used, e.g. because we don't support writes on it.
- Make some partitioning functions not dependent on the selected "CurrentPartition".
- Add some sanity checks.
- Improve some of the "is-partitioned" checks.
Similarly to FMIFS this structure should be private. Instead file-system
names are passed to the helper functions, allowing to use the names
returned by the FS drivers. The names are then internally mapped to the
corresponding FS providers.
In particular this allows to handle the "RAW" file-system and to assign
the 'Unformatted' flag to partitions having this FS.
Finally this helps us refining the checks performed to see whether the
current "active" system partition uses a supported file-system.
- Add checks for GPT disks and either fail or ignore the disk,
depending on the operation being executed.
[USETUP][REACTOS] Display the disk style more accurately.
CORE-7749
- Correctly insert discovered partitions in sorted order of StartSector,
and verify that they do not overlap (-> check for broken partitioning).
May help for CORE-10898.
- Use the correct reported partition numbers that may be modified after
partitioning changes, and that need to be used when opening
\Device\Harddisk'M'\Partition'N' files. This is achieving by
retrieving the returned value of the IOCTL_DISK_SET_DRIVE_LAYOUT call.
Distinguish them from the "on-disk" partition numbers that are the ones
that enumerate the partition in partition-table order (and is the order
known by e.g. the BIOS), and that should be used to construct the
destination ARC path.
May help for CORE-4870, CORE-13205.
- Simplify a lot of duplicated code by using helper functions.
Always perform the partition validity checks when creating new
primary/extended/logical partitions, and also when a new partition
is automatically created when unpartitioned space is selected for
ReactOS installation.
CORE-12246
This will allow compatibility with modern OSes and
modern disk management utilities.
It will also improve performances by properly aligning
partition start.
And it will let enough room at the begin of the disk
for 3rd party bootloaders.
WARNING: this is not compatible with previous partition
model, and old one will likely not be compatible. You'll
have to erase your whole partition table and start from
scratch.
- SETUPLIB and USETUP: Convert PARTENTRY::DriveLetter to WCHAR.
- SETUPLIB: Retrieve volume label.
- SETUPLIB and USETUP: Move the partition types (IDs) table from
USETUP to SETUPLIB so that they can share it with the 1st-stage
GUI installer too. Also take the opportunity to update the table
with information from http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
and cross-checked with the list from Paragon Hard-Disk Manager.
- USETUP: Simplify PrintPartitionData().
- Add some code comments.
- Use adequate access flag when opening symbolic links.
- Simplify the prototype of UpdateRegistry() since now both Setup INF
handle and settings lists are inside the USETUP_DATA structure.
This allows using some of the SetupApi.dll functions when SETUPLIB is
used in the (Win32) GUI 1st-stage installer "REACTOS", while using the
custom implemented NT-aware functions in "USETUP".
This includes also to remove the created symlinks.
Symlinks deletion is special, as one has to open first the symlink
itself (and not its target), then remove the "SymbolicLinkTarget" value
before really deleting the key. Of course everything must be done under
proper access rights.
Additional changes:
- Change prototype BOOLEAN CmpLinkKeyToHive(...) to NTSTATUS CreateSymLinkKey(...).
- Silence few DPRINTs.
- Document some FIXMEs that I need to inspect later on ReactOS.
- HKEY --> HANDLE.
- It can therefore be also used by the 1st-stage GUI setup.
- Rename some function parameters to clarify what they should be.
Based on:
svn path=/branches/setup_improvements/; revision=75750
- Apart from allowing a UI cache variable that may be used when
displaying GENERIC_LIST_ENTRY-ies, do not store any display strings
associated to these list entries. They should be instead computed only
when initializing a list UI (or a combo-box or list control if the
code is used in Win32 environment).
For this matter a callback is provided to InitGenericListUi() that
does the job of computing the displayed string corresponding to a
given GENERIC_LIST_ENTRY.
- Simplify the calls to InitGenericListUi(), and refactor the
RestoreGenericListUiState() function.
- Use for-loops for iterating over GENERIC_LIST items.
- Adapt the storage data format for lists of settings items.
- The txtsetup.sif INF format specified in LoadSetupInf() should not be
INF_STYLE_WIN4 (to be investigated...).
- Use OBJ_CASE_INSENSITIVE when initializing object attributes
(no actual reason why to keep case sensitivity there).
- Check the success of a RtlStringCchPrintfW call in EnumerateReactOSEntries().
- Explicitly check for returned STATUS_NOT_SUPPORTED from ChkdskPartition()
or FormatPartition(), and display an appropriate error message.
- Remove some left-over comments but also explain why I kept some
commented code (mainly for future reference).
Comment about the status of two '#if 0'.
[SETUPLIB] Fix some uninitialized variables (caught by clang-cl).
Also, initialize NtName->Length in return paths in ResolveArcNameManually().
Only convert to ANSI when needed (e.g. in the display code for usetup).
The 1st-stage GUI setup will however use the UNICODE strings directly.
svn path=/branches/setup_improvements/; revision=75753
