- Add more structures to ntdddisk.h
- Fix more compile errors in disk_new
- disk_new builds but fails to link as classpnp import lib is broken
svn path=/branches/usb-bringup-trunk/; revision=55451
- Implement ResetController and call it before setting up the controller
- Don't disable 64-bit addressing until the BIOS gives up control of the controller
- Comment out manually clearing the SMI interrupt and the BIOS owned flag by request of janderwald
- EHCI no longer hangs for me on real hardware during controller initialization
svn path=/branches/usb-bringup-trunk/; revision=55450
- Check if the report uses a report id
- Fix arrows in USB 2 PS/2 conversion table (Needs more fixing)
svn path=/branches/usb-bringup-trunk/; revision=55440
- Check if attaching to device stack failed. In that case fail the request
[HIDUSB]
- Always set SupriseRemovalOk
[USBCCGP] [HIDCLASS] [USBHUB] [USBSTOR]
- Check if the pdo is still in the pdo list. Only call IoDeleteDevice in that case
svn path=/branches/usb-bringup-trunk/; revision=55429
- Define USBDI_VERSION to 0x500 instead 0x600 because we support none of the Vista APIs so USBD will report the correct version
svn path=/branches/usb-bringup-trunk/; revision=55420
- Add and fix missing exports
- Add UNIMPLEMENTED to unimplemented functions
- Fix completely broken USBD_GetPdoRegistryParameter (which wasn't even exported because somebody made a typo and couldn't figure it out)
- My Linksys USB300M driver now loads but it runs into some unimplemented code paths in usbehci
svn path=/branches/usb-bringup-trunk/; revision=55416
- Add HID devices to the critical device database
- Fixes issues with mouse/keyboard not working until new device wizards are dismissed (USB drives work too)
[UMPNPMGR]
- Fix install failure after the kernel detects a critical device
[NTOSKRNL]
- Finally enable the proper IopResetDevice code
- Driver updating without a reboot for running devices is supported now (if someone will write the GUI)
[USBEHCI][USBOHCI]
- Fix removal bugs
svn path=/branches/usb-bringup-trunk/; revision=55401
- Remove hack of forwarding pdo requests to lower device object of fdo
- Implement handling of reset port and cycle port
- IOCTL_INTERNAL_USB_RESET_PORT / IOCTL_INTERNAL_USB_CYCLE_PORT now need to be implemented in usbhub
svn path=/branches/usb-bringup-trunk/; revision=55396
- Check if the transfer descriptors reported errors and propagate the error in the urb status field
- OHCI now reports error which the class driver are handling
- Allocate device descriptor from non paged pool to prevent possible alignment problems
- Fix checking of completed transfer descriptors
- Fix double freeing of descriptors
- Cleanup endpoints when the halted bit is set by the host controllers
- Check for the endpoint direction in the data descriptor
- Setup descriptor needs buffer rounding set
svn path=/branches/usb-bringup-trunk/; revision=55389
- Use constants instead of hardcoding register offsets. Taken from Haiku
- Elements in HCSP-PORTROUTE are 4 bit entries instead
svn path=/branches/usb-bringup-trunk/; revision=55385
- Write the partition table back after CheckActiveBootPartition() because it could've changed the partition table on a disk with no active partition
- Fixes issues installing ROS on new disks and disks with no active partitions (including USB disks)
svn path=/branches/usb-bringup-trunk/; revision=55382
- In 2012 a long protected natural resource for bugs was shutdown due to popular usb device support demand
- Fix length check in USBD_ParseDescriptors. (PLONG)Descriptor + TotalLength is not the length of the configuration descriptor but twice the configuration descriptor
- Reset found variable in the loop. This fixes finding of interfaces which are not the first one in the configuration descriptor
- Again moving to next usb descriptor was broken. UsbDeviceDescriptor = UsbDeviceDescriptor + UsbDeviceDescriptor->bLength does not move to the next but to next XX descriprors specified by bLength
- Introduced in rev 17382 (14/08/2005)
svn path=/branches/usb-bringup-trunk/; revision=55370
- Wait 100 milliseconds for the port power and insertion to stabilize
- Wait for the 10 millisecond "recovery" period after reset
svn path=/branches/usb-bringup-trunk/; revision=55367
- Use report value when report item bitcount > 1
[KBDHID]
- Print raw report
- KBDHID starts to receive normal keys and modifier keys
svn path=/branches/usb-bringup-trunk/; revision=55364
- Fix bugs in HandleClassEndpoint, HandleClassInterface which always set direction device to host instead of relying to the transfer flags provided
- Allow setup packets w/o a data stage
svn path=/branches/usb-bringup-trunk/; revision=55360
- Implement HidP_GetUsagesEx
- HidP_GetUsagesEx uses HidP_GetUsages with undefined usage page
- Required for hid usb support
- Check if there is a maximum set. In that case verify if a usage maximum has been set and apply it to the currnt usage. Fixes asserts while usb composite device installation (keyboard)
svn path=/branches/usb-bringup-trunk/; revision=55357
- Implement set idle request. The device should only send data when there is actual data. May also fix the mouse debug flood when mouse is ejected
- Not yet supported in OHCI
- Add missing constants
svn path=/branches/usb-bringup-trunk/; revision=55356
- Don't check for the correct parent in IopActionInitChildServices
- This function is also used to load drivers later for devices enumerated early in boot (before we have access to the disk) and we want it to run for all devices on the system, not just those that are immediate children of the root node
- Fixes broken PnP in 3rd stage
svn path=/branches/usb-bringup-trunk/; revision=55355
