- A caller of LsaRegisterLogonProcess is a trusted caller if the calling process has got the Tcb privilege, otherwise it is an untrusted caller.
- A caller of LsaConnectUntrusted is always an untrusted caller.
- A caller of LsapOpenLsaPort is always a trusted caller.
Fixes clang build, since ubuntu-latest (24.04.1 LTS / Noble Numbat) has no
LLVM 13 package available:
```
Ign:6 https://apt.llvm.org/noble llvm-toolchain-noble-13 InRelease
Err:9 https://apt.llvm.org/noble llvm-toolchain-noble-13 Release
404 Not Found [IP: 151.101.46.49 443]
Reading package lists...
E: The repository 'http://apt.llvm.org/noble llvm-toolchain-noble-13 Release' does not have a Release file.
Error: Process completed with exit code 100.
```
* [SHELL32] Use FS compatible PIDL format for Recycle Bin items
This allows SHChangeNotify to handle these items and DefView will correctly update the recycle folder.
CORE-18005 CORE-19239 CORE-13950 CORE-18435 CORE-18436 CORE-18437
Add support for configuring the CM lazy-flush and delay-close variables:
`CmpLazyFlushIntervalInSeconds`, `CmpLazyFlushHiveCount`,
and `CmpDelayedCloseSize`,
using REG_DWORD values named respectively:
`RegistryLazyFlushInterval`, `RegistryLazyFlushHiveCount`,
and `DelayCloseSize`,
in the registry key
`HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager` .
Extra observations:
- While delay-close support exists in Windows 2003, configuring
the delay-close size is possible only in Windows Vista and later.
- The possibility of configuring the lazy-flush hive count has been
removed in Windows 8+.
See the comparison tables at:
https://redplait.blogspot.com/2011/07/cmcontrolvector.htmlhttps://redplait.blogspot.com/2012/06/cmcontrolvector-for-w8.htmlhttps://redplait.blogspot.com/2016/03/cmcontrolvector-from-windows-10-build.html
In addition:
Remove `CmpDelayedCloseIndex` from cm.h as it is not used anymore in our code.
We do have IDS_PWR_HOURS_REMAINING and IDS_PWR_MINUTES_REMAINING string resources but they're never used programmatically.
Display the estimated battery time ONLY if the returned time is not unknown.
CORE-18969
CORE-19452
BatteryClassStatusNotify is used by battery miniport drivers to notify the Battery Class of a status change. This can either be a battery status change or battery tag assignation, depending on what the device extension (namely the composite battery) waits for.
We do have implementation for EVENT_BATTERY_STATUS but not for EVENT_BATTERY_TAG. What happens is when BatteryClassIoctl fails to query the battery tag because it has not yet been assigned, the thread is stuck on waiting for the event object to be signaled, forever.
This tipically happens when a timeout of -1 (meaning the calling thread must wait indefinitely) is supplied. The composite battery driver (COMPBATT) is responsible to signal the Battery Class when a CM (Control Method) ACPI battery receives a tag, which then this function will signal the event.
CORE-18969
CORE-19452
ReactOS (like any other OSes) expects power data to be represented in milliwatts per hour, not in milliamps per hour.
Currently CMBATT defaults the stats to unknown values, if that's the case, and there are a bunch of machines that do report their data from _BIF ACPI method in ampere.
CORE-18969
CORE-19452
KeWaitForSingleObject takes 100ns unit for timeout. Both IOCTL_BATTERY_QUERY_TAG and IOCTL_BATTERY_QUERY_STATUS take a wait for the timeout in milliseconds.
Supposedly a miniport driver wants to supply a wait of 5000 ms (which is equivalent to 5 s), the miniport driver WON'T BE WAITING 5 seconds but 0.5!!!
CORE-18969
CORE-19452
This is a temporary helper for the system call entry point to store the user mode stack, before switching to the kernel mode stack. Initially it was copied to the trap frame inside KiSystemCallHandler. This has been moved to the system call entry point, but some remnants remained. The problem is that KiSystemCallHandler can be called twice in a system call (when the call is the first GUI call and the stack needs to be extended). In that scenario, when the thread was preempted, a new value could be saved in the PCR before running KiSystemCallHandler again, and then overwriting the proper value with a bogus one from a different thread. This rarely seemed to happen on UP, but happens a lot with SMP.
Addendum to 0.4.16-dev-323-g c212c184f3 (#7352).
In the usage help message one line started with '\pentru', but it should have been '\tpentru'.
Fixes GCC compiler error:
base/applications/mscutils/eventvwr/lang/ro-RO.rc:177: unrecognized escape sequence
Co-authored-by: George Bișoc <george.bisoc@reactos.org>
Its support is controlled with a REG_DWORD value named
`VolatileBoot` inside the registry key
`HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager` .
Its implementation is very trivial: when enabled, CmpShareSystemHives
is set to TRUE and doesn't change state during runtime.
In a sense this is similar to what happens in WinPE-boot, except that
ALL hives without exception (system hives and others) will be loaded
in shared mode.
This is controlled with a REG_DWORD value named
`SelfHealingEnabled` inside the registry key
`HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Configuration Manager` .
The `CmSelfHeal` variable is used to retrieve the data,
hence it needs to be a ULONG.
The REG_DWORD value `AutoReboot` stored in the registry key
`HKLM\SYSTEM\CurrentControlSet\Control\CrashControl`
(used as a boolean value), controls whether to automatically reboot
the operating system at the end of the crash dump, after a bugcheck.
ReactOS doesn't currently implement crash dumps, so only the auto-reboot
is done. (The reason of the apparent redundant `Reboot` variable in
KeBugCheckWithTf() is because that variable would be updated on return
by the not-yet-existing crash-dump helper routines called from there.)
- Directly call KdpGetMemorySizeInMBs() within KdpPrintBanner(),
instead of having the caller doing it.
- Use the miarm.h MiIsMemoryTypeInvisible() helper.
- Add Doxygen comments.
- Move local variables to the code blocks where they are used.
- if-s one-line bodies on their own lines.
- Massage the boot-images symbols loading, using a for-loop.
PeLdrCheckForLoadedDll():
- Use a for-loop to iterate over the linked list.
- Adjust few comments.
- Use SAL2 annotations.
PeLdrpCompareDllName():
- Make its input paramters const.
- Use SAL2 annotations.
See https://learn.microsoft.com/en-us/windows-hardware/drivers/ddi/wdm/nf-wdm-rtlqueryregistryvalues
The RTL_REGISTRY_OPTIONAL applies to the first parameter of the
RtlQueryRegistryValues() function, not to the Flags member of the
table entries. However, a RTL_QUERY_REGISTRY_REQUIRED flag exists
to mark values whose existence is NOT optional.
Problematic usage was introduced in the following modules:
drivers/input/i8042prt: Commit e7e959fb0 (r30000)
drivers/input/kbdclass: Commit 5a77f871d (r18911)
drivers/input/mouclass: Commit aeeab7d1f (r18906)
drivers/input/sermouse: Commit 3f348259c (r19100)
rosapps/drivers/green : Commit c8a90f769 (r21165)
