Some mice give a logical min/logical max which is the maximum move
that they can provide. Those were wrongly detected as absolute mice,
and mouse pointer was mostly stuck at the upper left corner of the
screen.
Interface between both is not anymore the HidParser_* functions, but
the HidP_* functions and the AllocFunction/FreeFunction/DebugFunctions/
ZeroFunction/CopyFunction.
There is no need to compile our DLLs as shared libraries since we are
managing symbols exports and imports through spec files.
On my system, this reduces the configure-time by a factor of two.
The last parameter of USBPORT_ParseConfigurationDescriptor is a pointer
to a boolean indicating whether any alternate interface settings were
found for the specified interface.
Interpreting it as an alternate setting value, as we did before,
would always override the alternate setting to '1' (if any alternate
descriptors were present), therefore selecting the wrong interface
setting, and possibly causing a buffer overflow on the InterfaceList's
Pipes array.
Found by Special Pool.
There can be other descriptors between the config descriptor and the
first interface descriptor, so we specifically need to check for
the interface descriptor type and skip anything before that.
We also need to guard against bLength == 0, which would cause an
infinite loop, instead of doing a second bDescriptorType check.
We previously only gave the device a hard-coded amount of time to respond,
which could lead to interpreting the contents of uninitialized memory as
a response. This would lead to an unreasonably large number of audio function
groups being detected.
A KSEMAPHORE mirrors what Haiku uses here, though it may not be the optimal
synchronization primitive for this case under Windows.
This protects against crashing in case of faulty/malicious hardware,
but also works around a bug in HDA_SendVerbs that causes it to return
invalid data, thereby suggesting more groups than are actually present.
This will avoid 0-sized allocations, or -1-sized allocations.
So far, it's maxed by hard value stored in TCPIP.sys. I believe
this is not right and would deserve a true fix
This is needed in order to avoid an infinite recursive loop between
disk!UpdateRemovableGeometry() and ntos!IoReadPartitionTable().
This does not happen with NT5+ disk_new.sys because it doesn't call
IoReadPartitionTable() in that situation.
- Simplify failure path for DeviceName query failure
- Don't make stable query failure fail the whole function call
Based on a patch by Vadim Galiant
CORE-15550
- Add missing parameter to a DPRINT.
- Print pointers using %p instead of %x.
- Move all executable code behind a functions initial DPRINT.
- Do not use non-trivial initializers.
- Check for NULL instead of using !.
- Add missing parentheses.
the type of device it should return must not be FILE_DEVICE_CD_ROM, but must be the actual underlying one!
This fixes recognizing *removable* USB keys as disks and not CD-ROMs.
CORE-13184
* Add an NDK header to define INIT_FUNCTION/INIT_SECTION globally
* Use _declspec(allocate(x)) and _declspec(code_seg(x)) on MSVC versions that support it
* Use INIT_FUNCTION on functions only and INIT_SECTION on data only (required by MSVC)
* Place INIT_FUNCTION before the return type (required by MSVC)
* Make sure declarations and implementations share the same modifiers (required by MSVC)
* Add a global linker option to suppress warnings about defined but unused INIT section
* Merge INIT section into .text in freeldr
Do not enable it yet, as it doesn't work in ROS for the moment :-(.
Its place in tree is not optimal (it should be with disk/class/etc.),
but I prefer keeping it close to actual driver for now.
All the work has been done so that it compiles and links with ReactOS
SDK though.
- Cache the RootFcb so that its cleanup can be handled separately
during dismounting.
- Force volume dismount at cleanup if the VCB_DISMOUNT_PENDING flag
is set.
- Actually dismount a volume if its VCB has been flagged as not good,
or if we force dismounting.
NOTE: In their *CheckForDismount() function, our 3rd-party FS drivers
as well as MS' fastfat, perform a comparison check of the current VCB's
VPB ReferenceCount with some sort of "dangling"/"residual" open count.
It seems to be related to the fact that the volume root directory as
well as auxiliary data stream(s) are still opened, and only these are
allowed to be opened at that moment. After analysis it appears that for
the ReactOS' fastfat, this number is equal to "3".
- On dismounting, cleanup and destroy the RootFcb, VolumeFcb and the
FATFileObject. Then cleanup the SpareVPB or the IoVPB members, and
finish by removing the dismounted volume from the VolumeListEntry
and cleaning up the notify synchronization object and the resources.
- During dismounting, and on shutdown, flush the volume before
resetting its dirty bit.
- On shutdown, after volume flushing, try to unmount it without forcing.
- Release the VCB resources only when we actually dismount the volume
in VfatCheckForDismount().
- Initialize first the notify list and the synchronization object,
before sending the FSRTL_VOLUME_MOUNT notification.
- If we failed at mounting a volume but its VCB's FATFileObject was
already initialized, first call CcUninitializeCacheMap() on it
before dereferencing it.
- Send FSRTL_VOLUME_LOCK, FSRTL_VOLUME_LOCK_FAILED and
FSRTL_VOLUME_UNLOCK notifications during volume locking (and failure)
and volume unlocking.
- Flush the volume before locking it, and clean its dirty bit if needed.
NOTE: In addition to checking for VCB_CLEAR_DIRTY, we also check for the
presence of the VCB_IS_DIRTY flag before cleaning up the dirty bit: this
allows us to not re-clean the bit if it has been previously cleaned.
This is needed for instance in this scenario:
- The volume is locked (it gets flushed and the dirty bit is possibly cleared);
- The volume then gets formatted with a completely different FS, that
possibly clears up the first sector (e.g. BTRFS ignores 1st sector);
- The volume is then dismounted: if we didn't check whether VCB_IS_DIRTY
was set prior to resetting it, we could attempt clearing it again! But
now that the volume's filesystem has been completely changed, we would
then try to modify the dirty bit on an erroneous position on disk!
That's why it should not be touched in this case during dismounting.
- The volume is unlocked (same comment as above), and later can be
detected as being BTRFS.
We first check if a socket is listening before
checking whether it has connections. This allows
properly returning listening address.
Furthermore, if it's listening, properly return
status so that it displays nice in netstat.
Result: https://twitter.com/HeisSpiter/status/1064245622323200000 :-)
This leaked at least one IRP for every write, making it the largest leak when
running with BTRFS as the system volume.
Thanks to Victor Perevertkin.
Submitted upstream thanks to Pierre:
https://github.com/maharmstone/btrfs/pull/106