Fix a FIXME in IopCreateArcNames.
This allows ntoskrnl to find where it boots from and where it is when performing remote boot.
Now ReactOS should boot a bit farther using PXE :-).
svn path=/trunk/; revision=55485
- Don't set NumberOfTransaction 0x3 for the async queue head(Haiku doesnt do it too)
- Also don't set maximum packet length or interrupt on complete
- Stop the async / periodic schedules after acquiring ownership from os (ported from the Pedigree OS)
- Remove unused structs from header
- Allocate device descriptor from start of a page to prevent alignment issues
- Clear halted bit in the queue overlay transaction layer (usb_queue.cpp:507)
- Always set the alternative and next pointers in BuildControlTransferQueueHead
- Use data the toggle in the transfer requests
- Start using toggle in bulk requests, invert data toggle after each descriptor
- EHCI controller still reports error 0xA / 0xB which is USB Error Interrupt + Frame List Rollover + [USB Interrupt]
- Errors need to be researched more, though the control transfers results appear o.k.
- Tested in real hw + ros stack with USB Mass Storage Device
- Currently hangs after first completed CDB/Data/CSW block
svn path=/branches/usb-bringup-trunk/; revision=55483
[SMSS2]: Implement the main LPC loop and handle all the supported APIs (all stubs for now). Also handle new connection requests and implement SmpHandleConnectionRequest.
[SMSS2]: Implement subsystem helper functions.
[SMSS2]: Use SmApiPort2 instead of Sm2ApiPort.
[SMSS2]: Rename the SMSRV_APIs not to conflict with the function names, nor with the client functions in smlib.
svn path=/trunk/; revision=55478
- Wait for periodic scheduling to start
- Increase the wait interval for asynchronous scheduling to start
svn path=/branches/usb-bringup-trunk/; revision=55477
- Implement MiIsUserP*e inline functions to efficiently determine if a pte is a pte/pde/ppe or pxe for a user mode page
- Make MiDetermineUserGlobalPteMask work for _MI_PAGING_LEVELS >= 3
- In MiResolveDemandZeroFault, use MI_MAKE_HARDWARE_PTE only, it does all the necessary work.
svn path=/trunk/; revision=55472
[SMSS2]: Implement SmpLoadSubsystemsForMuSession which correctly creates a session, loads win32k.sys inside of it, and then detaches from the session. Winlogon.exe is set as the initial command (but not launched), and CSRSS is fake-started.
[CSRSRV]: No longer start win32k.sys, that's not your job.
[SMSS2]: Kill most debug prints that aren't errors.
svn path=/trunk/; revision=55467
- Modify the logic in MmArmAccessFault, so that faults on kernel mode addresses including page table addresses are handled in the first part and user mode addresses (VADs) in the second part. This works, because for the special case of page table addresses, the user mode and kernel mode part of the code end up doing the same thing and this simplifies the code.
- In the user mode part call MiCheckVirtualAddress early and bail out if no VAD is found, since we do not care about any other cases any more.
svn path=/trunk/; revision=55459
- Cleanup Win32kProcessCallback and Win32kThreadCallback
- Even though it works, trying to post a message in Win32kProcessCallback after the THREADINFO is destroyed can only cause trouble, so move it in Win32kThreadCallback
- There is no need to try opening a desktop and windowstation before winlogon initializes
- Handle errors properly when we fail to get a default window station and desktop for the new process
- Enable win32k syscall hook callbacks
- Rewrite SetThreadDesktop to update THREADINFO properly and handle errors properly
- Do not initialize the THREADINFO in GetW32ThreadInfo as it is now done properly (actually leave a small hack that updates pci->dwTIFlags)
- Add UserDbgAssertThreadInfo that asserts the integrity of THREADINFO, CLIENTINFO and CLIENTTHREADINFO. This is called by GetW32ThreadInfo and the syscall hook callbacks
svn path=/trunk/; revision=55458
- Implement MiSynchronizeSystemPde, which does what its name suggests, synchronize a system PDE and is an improved replacement (with a more proper name) for MiCheckPdeForPagedPool
- Move some code to avoid an additional check
- Call MiResolveDemandZeroFault directy instead of creating a demand zero PDE and then calling MiDispatchFault, which after a lot of checks will finally do the same
svn path=/trunk/; revision=55456
- modify MiResolveDemandZeroFault to take the page protection as a parameter instead of the PTE. This will be used soon.
- Move increment of counters into the region where the pfn lock is held to avoid race conditions and make heavy locked operations unneccessary
- Add some ASSERTs
svn path=/trunk/; revision=55454
[SMSS]: Neuter away most of the code and only keep SMSS around for managing the API port.
Next step is to make the SMSS2 API port go into use.
svn path=/trunk/; revision=55453
- Add more structures to ntdddisk.h
- Fix more compile errors in disk_new
- disk_new builds but fails to link as classpnp import lib is broken
svn path=/branches/usb-bringup-trunk/; revision=55451
- Implement ResetController and call it before setting up the controller
- Don't disable 64-bit addressing until the BIOS gives up control of the controller
- Comment out manually clearing the SMI interrupt and the BIOS owned flag by request of janderwald
- EHCI no longer hangs for me on real hardware during controller initialization
svn path=/branches/usb-bringup-trunk/; revision=55450
[NTDLL]: Fix (although I'm not sure quite why) LdrpCheckForLoadedDll which was crashing now that I've fixed PAGE_EXECUTE sections with only FILE_EXECUTE handles. Ironically, this meant that LdrpCheckForLoadedDll never worked until my previous fix some revisions ago, it always returned FALSE.
This should fix KVM/QEMU crashes...
svn path=/trunk/; revision=55448
In PeFmtCreateSection don't use the ImageBase field of the ImageOptionalHeader directly, since it's different between PE32 and PE64. Use the ImageSectionObject->ImageBase field instead, which already contains the correct value.
svn path=/trunk/; revision=55446
- Add MM_HAL_VA_END and use it in MiAddHalIoMappings instead of making assumptions about the page tables
- Add MM_SHARED_USER_DATA_VA for x86
- use MM_SHARED_USER_DATA_VA in Mm to avoid ambiguities
- fix or comment out USER_SHARED_DATA in asm headers, as it should be the kernel mode address here
- set Teb->ExceptionList to NULL on amd64, it is used as a link to the Wow64 TEB, if any
svn path=/trunk/; revision=55445
- When rosautotest is launched, show how much time has past since the machine has started
- Also show how much time each individual test need to complete
- The purpose of this feature isn't to benchmark the os but to let us spot regressions regarding test time
svn path=/trunk/; revision=55441
- Check if the report uses a report id
- Fix arrows in USB 2 PS/2 conversion table (Needs more fixing)
svn path=/branches/usb-bringup-trunk/; revision=55440
- load gpsi->dtCaretBlink and g_PaintDesktopVersion in sysparams.c
- Rename IntGdiGetLanguageID to UserGetLanguageID
- Remove some unused functions and definitions
svn path=/trunk/; revision=55439
- Modify MiRosTakeOverPebTebRanges to only create a memory area for the shared user page and rename it to MiRosTakeOverSharedUserPage. Previously it was creating a memory area for the whole region from USER_SHARED_DATA up to MM_HIGHEST_USER_ADDRESS, which is the majority of the x64 user mode address space and doesn't even contain the PEB/TEB. Those are allocated below the shared user page and get their memory areas created in MiInsertNode.
- Add amd64 versions of MmGetPageTableForProcess, MmUnmapPageTable, MmGetPageFileMapping
svn path=/trunk/; revision=55438
- Rewrite SeCaptureSecurityDescriptor. The old code was mess and totally broken for 64 bit.
- Many fixes to security descriptor code that was making wrong assumptions about the SECURITY_DESCRIPTOR structures
svn path=/trunk/; revision=55437
