- Add MI_REAL_SYSTEM_RANGE_START, which is the canonical system space base address, while MmSystemRangeStart variable contains a broken value, like on Windows.
- Define MmSystemRangeStart to MI_REAL_SYSTEM_RANGE_START, since on amd64 there is no dynamic system space start address and we don't want to use the broken address anywhere
- Add some more address layout definitions
- Add MiIsPteOnP*eBoundary() macro
- Add MMPPE, MI_WRITE_VALID_PPE and ValidKernelPpe definitions
- Fix initialization of PrototypePte
- Add mappings for VAD bitmap and working set list to MiInitializePageTable
- Fix calculations in MiBuildNonPagedPool
- Improve MiBuildSystemPteSpace
- Implement MiBuildPfnDatabase, MiAddDescriptorToDatabase, MiBuildPfnDatabaseFromPageTables, MiSetupPfnForPageTable all of these are written to be portable, yet they are untested on anything else than amd64 builds
- Mostly finish MiInitMachineDependent
svn path=/trunk/; revision=55403
- Add HID devices to the critical device database
- Fixes issues with mouse/keyboard not working until new device wizards are dismissed (USB drives work too)
[UMPNPMGR]
- Fix install failure after the kernel detects a critical device
[NTOSKRNL]
- Finally enable the proper IopResetDevice code
- Driver updating without a reboot for running devices is supported now (if someone will write the GUI)
[USBEHCI][USBOHCI]
- Fix removal bugs
svn path=/branches/usb-bringup-trunk/; revision=55401
- Rewrite MmFindGapBottomUp and MmFindGapTopDown, the old versions were broken and were first checking the address range after the first memory area and only used the area below (above) the first memory are when nothing free was found.
- Fix an ASSERT, that gets triggered now that the memory areas are created at the "right" locations
- Create a memory are for the boot loaded images, which previously could be overwritten happily by new memory areas, which was only prevented by the brokenness of the code
- Fix a few memory regions so that they are correct for amd64 builds as well
svn path=/trunk/; revision=55397
- Remove hack of forwarding pdo requests to lower device object of fdo
- Implement handling of reset port and cycle port
- IOCTL_INTERNAL_USB_RESET_PORT / IOCTL_INTERNAL_USB_CYCLE_PORT now need to be implemented in usbhub
svn path=/branches/usb-bringup-trunk/; revision=55396
- Properly handle an empty list in SmpSaveRegistryValue
- Compare the value string for equality, as the comment says, not inequality
- This fixes a crash, although another solution may perhaps be better
svn path=/trunk/; revision=55391
- Check if the transfer descriptors reported errors and propagate the error in the urb status field
- OHCI now reports error which the class driver are handling
- Allocate device descriptor from non paged pool to prevent possible alignment problems
- Fix checking of completed transfer descriptors
- Fix double freeing of descriptors
- Cleanup endpoints when the halted bit is set by the host controllers
- Check for the endpoint direction in the data descriptor
- Setup descriptor needs buffer rounding set
svn path=/branches/usb-bringup-trunk/; revision=55389
- Use constants instead of hardcoding register offsets. Taken from Haiku
- Elements in HCSP-PORTROUTE are 4 bit entries instead
svn path=/branches/usb-bringup-trunk/; revision=55385
- Write the partition table back after CheckActiveBootPartition() because it could've changed the partition table on a disk with no active partition
- Fixes issues installing ROS on new disks and disks with no active partitions (including USB disks)
svn path=/branches/usb-bringup-trunk/; revision=55382
- In 2012 a long protected natural resource for bugs was shutdown due to popular usb device support demand
- Fix length check in USBD_ParseDescriptors. (PLONG)Descriptor + TotalLength is not the length of the configuration descriptor but twice the configuration descriptor
- Reset found variable in the loop. This fixes finding of interfaces which are not the first one in the configuration descriptor
- Again moving to next usb descriptor was broken. UsbDeviceDescriptor = UsbDeviceDescriptor + UsbDeviceDescriptor->bLength does not move to the next but to next XX descriprors specified by bLength
- Introduced in rev 17382 (14/08/2005)
svn path=/branches/usb-bringup-trunk/; revision=55370
- Wait 100 milliseconds for the port power and insertion to stabilize
- Wait for the 10 millisecond "recovery" period after reset
svn path=/branches/usb-bringup-trunk/; revision=55367
- Use report value when report item bitcount > 1
[KBDHID]
- Print raw report
- KBDHID starts to receive normal keys and modifier keys
svn path=/branches/usb-bringup-trunk/; revision=55364
- Attempt to fix the font leak when switching applications. Tested with other applications other than Acrobat Reader since it crashes when installing. See bug 5314.
svn path=/trunk/; revision=55362
- Fix bugs in HandleClassEndpoint, HandleClassInterface which always set direction device to host instead of relying to the transfer flags provided
- Allow setup packets w/o a data stage
svn path=/branches/usb-bringup-trunk/; revision=55360
- Implement HidP_GetUsagesEx
- HidP_GetUsagesEx uses HidP_GetUsages with undefined usage page
- Required for hid usb support
- Check if there is a maximum set. In that case verify if a usage maximum has been set and apply it to the currnt usage. Fixes asserts while usb composite device installation (keyboard)
svn path=/branches/usb-bringup-trunk/; revision=55357
- Implement set idle request. The device should only send data when there is actual data. May also fix the mouse debug flood when mouse is ejected
- Not yet supported in OHCI
- Add missing constants
svn path=/branches/usb-bringup-trunk/; revision=55356
- Don't check for the correct parent in IopActionInitChildServices
- This function is also used to load drivers later for devices enumerated early in boot (before we have access to the disk) and we want it to run for all devices on the system, not just those that are immediate children of the root node
- Fixes broken PnP in 3rd stage
svn path=/branches/usb-bringup-trunk/; revision=55355
Implement IoVolumeDeviceToDosName(), taking advantage of newcomer in the branch, MountMgr :-).
This implementation will in fact don't work as MountMgr doesn't implement that part... But the day it's ready, this function will be!
svn path=/branches/usb-bringup-trunk/; revision=55354
- Rewrite hidparser so that it support multiple top level collections
- Add support for flat collection context meaning all context structures are aligned in after each other. The reason this is required is that usermode hid.dll will access the same structure and thus can't use kernel pointers. User mode hid.dll is used to support keyboard with custom keys (for example search key, email key etc)
svn path=/branches/usb-bringup-trunk/; revision=55353
