plan9fox/sys/doc/nupas/nupas.ms
2017-03-12 17:15:03 +01:00

355 lines
13 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

.EQ
delim $$
.EN
.TL
Scaling Upas
.AU
Erik Quanstrom
quanstro@coraid.com
.AB
The Plan 9 email system, Upas, uses traditional methods of delivery to
.UX
mail boxes while using a user-level file system, Upas/fs, to
translate mail boxes of various formats into a single, convenient format for access.
Unfortunately, it does not do so efficiently. Upas/fs
reads entire folders into core. When deleting email from mail boxes,
the entire mail box is rewritten. I describe how Upas/fs has been
adapted to use caching, indexing and a new mail box format (mdir) to
limit I/O, reduce core size and eliminate the need to rewrite mail
boxes.
.AE
.NH
Introduction
.LP
.DS I
Chained at his root two scion demons dwell
.br
Erasmus Darwin, The Botanic Garden
.DE
.LP
At Coraid, email is the largest resource user in the system by orders
of magnitude. As of July, 2007, rewriting mail boxes was using
300MB/day on the WORM and several users required more than 400MB of
core. As of July, 2008, rewriting mail boxes was using 800MB/day on
the WORM and several users required more than 1.2GB of core to read
email. Clearly these are difficult to sustain levels of growth, even
without growth of the company. We needed to limit the amount of disk
space used and, more urgently, reduce Upas/fs' core size.
.LP
The techniques employed are simple. Mail is now stored in a directory
with one message per file. This eliminates the need to rewrite mail
boxes. Upas/fs now maintains an index which allows it to present
complete message summaries without reading indexed messages.
Combining the two techniques allows Upas/fs to read only new or
referenced messages. Finally, caching limits both the total number of
in-core messages and their total size.
.NH
Mdir Format
.LP
In addition to meeting our urgent operational requirements of reducing
memory and disk footprint, to meet the expectations of our users we
require a solution that is able to handle folders up to ten thousand
messages, open folders quickly, list the contents of folders quickly
and support the current set of mail readers.
.LP
There are several potential styles of mail boxes. The maildir[1] format
has some attractive properties. Mail can be delivered to or deleted
from a mail box without locking. New mail or deleted mail may be
detected with a directory scan. When used with WORM storage, the
amount of storage required is no more than the size of new mail
received. Mbox format can require that a new copy of the inbox be
stored every day. Even with storage that coalesces duplicate blocks
such as Venti, deleting a message will generally require new storage
since messages are not disk-block aligned. Maildir does not reduce
the cost of the common task of a summary listing of mail such as
generated by acme Mail.
.LP
The mails[2] format proposes a directory per mail. A copy of
the mail as delivered is stored and each mime part is decoded
in such a way that a mail reader could display the file directly.
Command line tools in the style of MH[3] are used to display and
process mail. Upas/fs is not necessary for reading local mail.
Mails has the potential to reduce memory footprint below that
offered by mdirs for native email reading. However all of the
largest mail boxes at our site are served exclusively through IMAP.
The preformatting by mails would be unnecessary for such accounts.
.LP
Other mail servers such as Lotus Notes[4] store email in a custom
database format which allows for fielded and full-text searching
of mail folders. Such a format provides very quick mail
listings and good search capabilities. Such a solution would not
lend itself well to a tool-based environment, nor would it be simple.
.LP
Maildir format seemed the best basic format but its particulars are
tied to the
.UX
environment; mdir is a descendant. A mdir folder
is a directory with the name of the folder. Messages in the mdir
folder are stored in a file named
.I "utime.seq" .
.I Utime
is defined as the decimal
.UX
seconds when the message was added to
the folder. For the inbox, this time will correspond to the
.UX
“From ” line.
.I Seq
is a two-digit sequence number starting with
.CW "00."
The lowest available sequence number is used to store the message.
Thus, the first email possible would be named
.CW "0.00."
To prevent accidents, message files are stored with
the append-only and exclusive-access bits turned on.
The message is stored in the same format it would be in mbox
format; each message is a valid mbox folder with a single message.
.NH
Indexing
.LP
When upas/fs finds an unindexed message, it is added to the index.
The index is a file named
.I "foldername" .idx
and consists a signature and one line per MIME part. Each line
contains the SHA1 checksum of the message (or a place holder for
subparts), one field per entry in the
.I "messageid/info"
file, flags and the number of subparts. The flags are currently a
superset of the standard IMAP flags. They provide the similar
functionality to maildir's modified file names. Thus the `S'
(answered) flag remains set between invocations of mail readers.
Other mutable information about a message may be stored in a similar
way.
.LP
Since the
.I info
file is read by all the mail readers to produce mail listings,
mail boxes may be listed without opening any mail files when no new
mail has arrived. Similarly, opening a new mail box requires reading
the index and checking new mail. Index files are typically between
0.5% and 5% the size of the full mail box. Each time the index is
generated, it is fully rewritten.
.NH
Caching
.LP
Upas/fs stores each message in a
.CW "Message"
structure. To enable caching, this structure was split
into four parts: The
.CW "Idx"
(or index), message subparts, information on the cache state of the
message and a set of pointers into the processed header and body.
Only the pointers to the processed header and body are subject to
caching. The available cache states are
.CW "Cidx" ,
.CW "Cheader"
and
.CW "Cbody" .
.LP
When the header and body are not present, the average message with
subparts takes roughly 3KB of memory. Thus a 10,000 message mail box
would require roughly 30MB of core in addition to any cached
messages. Reads of the
.CW "info"
or
.CW "subject"
files can be satisfied from the information in the
.CW "Idx"
structure.
.LP
Since there are a fair number of very large messages, requests that
can be satisfied by reading the message headers do not result in the
full message being read. Reads of the
.CW "header"
or
.CW "rawheader"
files of top-level messages are satisfied in this way. Reading the
same files for subparts, however, results in the entire message being
read. Caching the header results in the
.CW "Cheader"
cache state.
.LP
Similarly, reading the
.CW "body"
requires the body to be read, processed and results in
the
.CW "Cbody"
cache state. Reading from MIME subparts also results
in the
.CW "Cbody"
cache state.
.LP
The cache has a simple LRU replacement policy. Each time a cached
member of a message is accessed, it is moved to the head of the list.
The cache contains a maximum number of messages and a maximum size.
While the maximum number of messages may not be exceeded, the maximum
cache size may be exceeded if the sum of all the currently referenced
messages is greater than the size of the cache. In this case all
unreferenced messages will be freed. When removing a message
from the cache all of the cacheable information is freed.
.NH
Collateral damage
.LP
.DS I
Each new user of a new system uncovers a new class of bugs.
.br
— Brian Kernighan
.DE
.LP
In addition to upas/fs, programs that have assumptions about how
mail boxes are structured needed to be modified. Programs which
deliver mail to mail boxes (deliver, marshal, ml, smtp) and append messages to
folders were given a common (nedmail) function to call. Since this
was done by modifying functions in the Upas common library, this
presented a problem for programs not traditionally part of Upas
such as acme Mail and imap4d. Rather than fold these programs
into Upas, a new program, mbappend, was added to Upas.
.LP
Imap4d also requires the ability to rename and remove folders.
While an external program would work for this as well, that
approach has some drawbacks. Most importantly, IMAP folders
can't be moved or renamed in the same way without reimplementing
functionality that is already in upas/fs. It also emphasises the
asymmetry between reading and deleting email and other folder
actions. Folder renaming and removal were added to upas/fs.
It is intended that mbappend will be removed soon
and replaced with equivalent upas/fs functionality —
at least for non-delivery programs.
.LP
Mdirs also expose an oddity about file permissions. An append-only
file that is mode
.CW 0622
may be appended to by anyone, but is readable only by the owner.
With a directory, such a setup is not directly possible as write permission
to a directory implies permission to remove. There are a number of
solutions to this problem. Delivery could be made asymmetrical—incoming
files could be written to a mbox. Or, following the example of the outbound
mail queue, each user could deliver to a directory owned by that user.
In many BSD-derived
.UX
systems, the “sticky bit” on directories is used to modify
the meaning of the
.CW w
bit for users matching only the other bits. For them, the
.CW w
bit gives permission to create but not to remove.
.LP
While this is somewhat of a one-off situation, I chose to implement
a version of the “sticky bit” using the existing append-only bit on our
file server. This was implemented as an extra permission check when
removing files. Fewer than 10 lines of code were required.
.NH
Performance
.LP
A representative local mail box was used to generate some rough
performance numbers. The mail box is 110MB and contains 868 messages.
These figures are shown in table 1. In the worse case—an unindexed
mail box—the new upas/fs uses 18% of the memory of the original while
using 13% more cpu. In the best case, it uses only 5% of the memory
while using only 13% of the cpu. Clearly, a larger mail box will make
these ratios more attractive. In the two months since the snapshot was
taken, that same mail box has grown to 220MB and contains 1814
messages.
.ps -2
.DS C
.TS
box, tab(:);
c s s s s
c | c | c | c | c
a | n | n | n | n.
Table 1 Performance
_
action:user:system:real:core size:
:s:s:s:MB:
_
old fs read:1.69:0.84:6.07:135
_
initial read:1.65:0.90:6.90:25
_
indexed read:0.64:0.03:0.77:6.5
.TE
.DE
.NL
.NH
Future Work
.LP
While Upas' memory usage has been drastically reduced,
it is still a work-in-progress. Caching and indexing are
adequate but primitive. Upas/fs is still inconsistently
bypassed for appending messages to mail boxes. There
are also some features which remain incomplete. Finally,
the small increase in scale brings some new questions about
the organization of email.
.LP
It may be useful for mail boxes with very large numbers
of messages to divide the index into fixed-size chunks.
Then messages could be read into a fixed-sized pool of
structures as needed. However it is currently hard to
see how clients could easily interface a mail box large
enough for this technique to be useful. Currently, all
clients assume that it is reasonable to allocate an
in-core data structure for each message in a mail box.
To take advantage of a chunked index, clients (or the
server) would need a way of limiting the number of
messages considered at a time. Also, for such large
mail boxes, it would be important to separate the
incoming messages from older messages to limit the work
required to scan for new messages.
.LP
Caching is particularly unsatisfactory. Files should
be read in fixed-sized buffers so maximum memory usage
does not depend on the size of the largest file in the
mail box. Unfortunately, current data structures do not readily
support this. In practice, this limitation has not yet
been noticeable.
.LP
There are also a few features that need to be completed.
Tracking of references has been added to marshal and
upas/fs. In addition, the index provides a place to store
mutable information about a message. These capabilities
should be built upon to provide general threading and
tagging capabilities.
.NH
Speculation
.LP
Freed from the limitation that all messages in a
mail box must be read and stored in memory before a
single message may be accessed, it is interesting to
speculate on a few further possibilites.
.LP
For example, it may be
useful to replace separate mail boxes with a single
collection of messages assigned to one or more virtual
mail boxes. The association between a message and a
mail box would be a “tag.” A message could be added to
or removed from one or more mail boxes without modifying
the mdir file. If threads were implemented by tagging
each message with its references, it would be possible
to follow threads across mail boxes, even to messages
removed from all mail boxes, provided the underlying
file were not also removed. If a facility for adding
arbitrary, automatic tags were enabled, it would be
possible to tag messages with the email address in
the SMTP From line.
.NH
References
.IP [1]
D. Bernstein, “Using maildir format”,
published online at
.br
http://cr.yp.to/proto/maildir.html
.IP [2]
F. Ballesteros
.IR mails (1),
published online at
http://lsub.org/magic/man2html/1/mails
.IP [3]
MH Wikipedia entry,
http://en.wikipedia.org/wiki/MH_Message_Handling_System
.IP [4]
Lotus Notes Wikipedia entry,
http://en.wikipedia.org/wiki/Lotus_Notes
.IP [5]
D. Presotto, “Upas—a Simpler Approach to Network Mail”,
Proceedings of the 10th Usenix conference, 1985.