165 lines
4.9 KiB
Text
165 lines
4.9 KiB
Text
.TH FLASH 3
|
|
.SH NAME
|
|
flash \- flash memory
|
|
.SH SYNOPSIS
|
|
.nf
|
|
.BI "bind -a #F" \fR[\fPn\fR]\fP " /dev"
|
|
.sp 0.3v
|
|
.B /dev/flash
|
|
.BI /dev/flash/ part
|
|
.BI /dev/flash/ part ctl
|
|
.fi
|
|
.SH DESCRIPTION
|
|
The flash memory device serves a two-level directory,
|
|
giving access to files representing part or all of a bank of flash memory.
|
|
A platform might have more than one bank of flash, numbered starting from 0.
|
|
The attach specifier
|
|
.I n
|
|
is a decimal integer that selects a particular bank of flash (default: 0).
|
|
Both NOR and NAND flash is supported.
|
|
For both types of flash,
|
|
the driver gives a read/write/erase interface to the raw flash device,
|
|
which can impose constraints on operations beyond those imposed by the driver.
|
|
.PP
|
|
The top level directory contains a single directory named
|
|
.B flash
|
|
for bank 0, and
|
|
.BI flash n
|
|
for each other bank
|
|
.IR n .
|
|
It contains two files for each partition:
|
|
a data file
|
|
.I part
|
|
and an associated control file
|
|
.IB part ctl ,
|
|
where
|
|
.I part
|
|
is the name of the partition.
|
|
Each partition represents a region of flash memory that starts and ends
|
|
on a flash segment (erase unit) boundary.
|
|
The system initially creates a single standard partition
|
|
.B flash
|
|
representing the whole of flash memory, and the corresponding control file
|
|
.BR flashctl .
|
|
Other partitions can be created by writing to
|
|
.B flashctl
|
|
as described below.
|
|
.PP
|
|
The data file
|
|
.I part
|
|
provides read and write access to the bytes on the system's flash memory.
|
|
Bytes can be read and written on any byte boundary:
|
|
the interface hides any alignment restrictions.
|
|
A read returns the value of the bytes at the current file offset,
|
|
where zero is the start of the partition.
|
|
A write reprograms the flash to the given byte values, at the current
|
|
file offset (relative to the start of the partition), using the physical
|
|
device's reprogramming algorithm.
|
|
An erased flash byte is logically
|
|
.B 0xFF
|
|
(regardless of the conventions of the physical flash device).
|
|
A write can change a bit with value 1 to a 0,
|
|
but cannot change a 0 bit to 1;
|
|
that can only be done by erasing one or more flash segments.
|
|
NAND flash typically has restrictions on the number of writes
|
|
allowed to a page before requiring a block erase.
|
|
.\" bad idea:
|
|
.\" Reads and writes are unbuffered.
|
|
.PP
|
|
The control file
|
|
.BI part ctl
|
|
can be read and written.
|
|
A read returns several lines containing decimal and hexadecimal numbers
|
|
(separated by white space)
|
|
revealing the characteristics of memory within the partition.
|
|
The first line gives
|
|
the manufacturer ID, the flash device ID, the memory width in bytes,
|
|
and a string giving the flash type
|
|
(currently either
|
|
.B nor
|
|
or
|
|
.BR nand ).
|
|
Subsequent lines give characteristics of each group of erase units
|
|
within the partition,
|
|
where the erase units within a group have the same properties.
|
|
Each line gives the start and end (as byte addresses)
|
|
of the erase units in the region
|
|
that lie within the partition,
|
|
followed by the size in bytes of each erase unit, which is followed
|
|
for NAND flash by the size in bytes of a page.
|
|
The sizes for NAND flash include the extra bytes per page
|
|
typically used to hold an ECC and block status.
|
|
A write contains one of the following textual commands:
|
|
.TF "erase al"
|
|
.TP
|
|
.BI add " name start end"
|
|
Create a new partition that ranges from
|
|
.I start
|
|
to
|
|
.I end
|
|
within the current partition.
|
|
Each value must be numeric (decimal, octal or hexadecimal)
|
|
and a multiple of the erase unit size.
|
|
.I Name
|
|
must not be the name of an existing partition.
|
|
On success, new files
|
|
.I name
|
|
and
|
|
.IB name ctl
|
|
will appear in the parent
|
|
.B flash
|
|
directory.
|
|
.TP
|
|
.B erase all
|
|
Erase the whole flash partition, setting all bytes to
|
|
.BR 0xFF ,
|
|
except those that are hardware write-protected.
|
|
.TP
|
|
.BI erase " offset"
|
|
Erase the segment that begins at the given
|
|
.I offset
|
|
within the partition,
|
|
setting all bytes to
|
|
.BR 0xFF ,
|
|
except those that are hardware write-protected.
|
|
The
|
|
.I offset
|
|
is given in bytes, but must be a multiple
|
|
of the segment (erase unit) size.
|
|
.TP
|
|
.BR protectboot " [ " off " ]"
|
|
By default the system prevents erase unit 0 of the flash from being
|
|
erased or written, assuming it
|
|
contains the primary bootstrap.
|
|
Writing this command with parameter
|
|
.B off
|
|
removes that protection.
|
|
Writing
|
|
.B protectboot
|
|
with any other parameter (or none) restores the protection.
|
|
Note that a manufacturer might also have locked the flash in hardware,
|
|
and that protection must be removed in a device-dependent way.
|
|
.TP
|
|
.B sync
|
|
If the underlying device must buffer or cache (current devices do not),
|
|
flush the buffer(s).
|
|
.PD
|
|
.PP
|
|
The syntax of all numbers is that of
|
|
.I strtoul
|
|
(in
|
|
.IR atof (2));
|
|
the default base is 10.
|
|
.SH SOURCE
|
|
.B /sys/src/9/*/devflash.c
|
|
.SH SEE ALSO
|
|
.IR flashfs (4),
|
|
.IR paqfs (4)
|
|
.SH DIAGNOSTICS
|
|
A write will return an error if
|
|
an attempt is made to change a 0 bit to 1,
|
|
or if the flash memory fails to be programmed correctly.
|
|
.SH BUGS
|
|
The flash cannot be written if the kernel is executing directly from flash,
|
|
because the physical flash cannot be read during programming,
|
|
and the driver does not copy the programming code to DRAM.
|