543 lines
14 KiB
Plaintext
543 lines
14 KiB
Plaintext
.TH USB 3
|
|
.EQ
|
|
delim $$
|
|
.EN
|
|
.SH NAME
|
|
usb \- USB Host Controller Interface
|
|
.SH SYNOPSIS
|
|
.nf
|
|
.B bind -a #u /dev
|
|
.PP
|
|
.nf
|
|
.B /dev/usb
|
|
.B /dev/usb/ctl
|
|
.BI /dev/usb/ep N . M
|
|
.BI /dev/usb/ep N . M /data
|
|
.BI /dev/usb/ep N . M /ctl
|
|
\&...
|
|
.fi
|
|
.SH DESCRIPTION
|
|
The Universal Serial Bus is a complex yet popular bus
|
|
for connecting all kind of devices to a computer.
|
|
It is a tree-shaped bus that provides both communication and (limited)
|
|
power to devices.
|
|
Branching points in the tree are provided by devices called
|
|
.IR hubs .
|
|
Hubs provide ports where USB devices (also hubs) can be attached.
|
|
.PP
|
|
Most PCs have one or more USB controllers called
|
|
.I host
|
|
controllers.
|
|
Each one has a built-in hub called a
|
|
.I "root hub"
|
|
providing several ports.
|
|
In some cases, more hubs are built-in
|
|
and attached to a root hub port.
|
|
The topology of the network is a tree with at most
|
|
127 nodes, counting both internal and leaf nodes.
|
|
.PP
|
|
Host controllers come in four flavours:
|
|
UHCI and OHCI for USB 1 (up to 12 Mb/s),
|
|
EHCI for USB 2 (up to 480 Mb/s)
|
|
and
|
|
XHCI for USB 3 (up to 5 Gb/s).
|
|
.PP
|
|
The USB bus is fully controlled by the host; all devices are polled.
|
|
Hubs are passive in the sense that they do not poll the devices attached
|
|
to them.
|
|
The host polls those devices and the hubs merely route the messages.
|
|
.PP
|
|
Devices may be added to or removed from the bus at any time.
|
|
When a device is attached, the host queries it to determine its type and speed.
|
|
The querying process is standardized.
|
|
The first level of querying is the same for all devices,
|
|
the next is somewhat specialized
|
|
for particular classes of devices (such as mice, keyboards, or audio devices).
|
|
Specialization continues as subclasses and subsubclasses are explored.
|
|
.PP
|
|
Enumeration of the bus and initial configuration of devices is done
|
|
by a user-level program,
|
|
.IR usbd .
|
|
Device drivers are implemented by separate user programs, although
|
|
some of them may be statically linked into
|
|
.IR usbd .
|
|
.PP
|
|
The kernel device described in this page is responsible for providing
|
|
I/O for using the devices through so called
|
|
.IR endpoints .
|
|
Access to the host controller is hidden from user programs, which see
|
|
just a set of endpoints.
|
|
After system initialization, some endpoints
|
|
are created by the device to permit I/O to root hubs.
|
|
All other devices must be configured by
|
|
.IR usbd .
|
|
.SS Devices and Endpoints
|
|
A device includes one or more functions (e.g., audio output,
|
|
volume control buttons, mouse input, etc.)
|
|
Communication with device functions is performed
|
|
by some combination of
|
|
issuing control requests to, sending data to, and receiving data from
|
|
device
|
|
.IR endpoints .
|
|
Endpoints can be understood as addresses in the bus.
|
|
There are several types:
|
|
.TF "\fIIsochronous
|
|
.TP
|
|
.I Control
|
|
Their main use is to configure devices.
|
|
Writing a message with a specific format
|
|
(specified in the USB specification)
|
|
issues a request to the device.
|
|
If the request implies a reply,
|
|
a read can be made next to retrieve the requested data (if the write succeeded).
|
|
.TP
|
|
.I Interrupt
|
|
Used to send and receive messages to or from a specific device function
|
|
(e.g., to read events from a mouse).
|
|
.TP
|
|
.I Bulk
|
|
Used to send and receive larger amounts of data through streams
|
|
(e.g., to write blocks to a disk).
|
|
.TP
|
|
.I Isochronous
|
|
Used to send and receive data in a timely manner
|
|
(e.g., to write audio samples to a speaker).
|
|
.PD
|
|
.PP
|
|
All USB devices include at least
|
|
a control endpoint to perform device configuration.
|
|
This is called the
|
|
.I setup
|
|
endpoint or
|
|
.IR "endpoint zero" .
|
|
After configuring a device, other endpoints may be created
|
|
as dictated by the device to perform actual I/O.
|
|
.SS Operation
|
|
Bus enumeration and device configuration is performed by
|
|
.I usbd
|
|
and not by this driver.
|
|
The driver provides an interface
|
|
to access existing endpoints (initially those for the built-in root hubs),
|
|
to create and configure other ones, and to perform I/O through them.
|
|
.PP
|
|
Each directory
|
|
.BI /dev/usb/ep N . M
|
|
represents an endpoint, where
|
|
.I N
|
|
is a number identifying a device and
|
|
.I M
|
|
is a number identifying one of its endpoints.
|
|
.PP
|
|
For each device attached to the bus, and configured by
|
|
.IR usbd ,
|
|
an endpoint zero (a
|
|
.I setup
|
|
endpoint)
|
|
is provided at
|
|
.BI /dev/usb/ep N .0
|
|
for configuring the device.
|
|
This is always a control endpoint and represents the device itself.
|
|
.PP
|
|
The device driver may use the setup endpoint
|
|
to issue control requests and perhaps to create more endpoints for the device.
|
|
Each new endpoint created has its own directory as said above.
|
|
For example, if the driver for the device
|
|
.BI /dev/usb/ep N . 0
|
|
creates the endpoint number 3 for that device, a directory
|
|
.BI /dev/usb/ep N .3
|
|
will be available to access that endpoint.
|
|
.PP
|
|
All endpoint directories contain two files:
|
|
.B data
|
|
and
|
|
.BR ctl .
|
|
The former has mode bit
|
|
.B DMEXCL
|
|
set and can be open by only one process at a time.
|
|
.SS data
|
|
.PP
|
|
The
|
|
.B data
|
|
file is used to perform actual I/O.
|
|
In general, reading from it retrieves
|
|
data from the endpoint and writing into it sends data to the endpoint.
|
|
For control endpoints, writing to this file issues a control request
|
|
(which may include data); if the request retrieves data from the device,
|
|
a following read on the file will provide such data.
|
|
.PP
|
|
USB errors reported by the endpoint upon I/O failures
|
|
are passed to the user process through the error string.
|
|
I/O stalls not resulting from an error, usually
|
|
an indication from the device, are reported by indicating that the
|
|
number of bytes transferred has been zero.
|
|
In most cases, the correct course of action after noticing the stall
|
|
is for the device driver to issue a `clear halt' request (see
|
|
.I unstall
|
|
in
|
|
.IR nusb (2))
|
|
to resume I/O.
|
|
The most common error is
|
|
.L crc/timeout
|
|
indicating problems in communication with the device (e.g., a physical
|
|
detach of the device or a wiring problem).
|
|
.PP
|
|
For control and isochronous transfers, there is an implicit
|
|
timeout performed by the kernel and it is not necessary for applications
|
|
to place their own timers.
|
|
For other transfer types, the kernel will not time out any operation
|
|
by default
|
|
(but see the
|
|
.L timeout
|
|
control request).
|
|
.SS "ctl and status"
|
|
.PP
|
|
The
|
|
.B ctl
|
|
file can be read to learn about the endpoint.
|
|
It contains information that can be used
|
|
to locate a particular device (or endpoint).
|
|
It also accepts writes with textual control requests described later.
|
|
.PP
|
|
This may result from the read of an endpoint control file:
|
|
.IP
|
|
.EX
|
|
.I "(the first line is wrapped to make it fit here)"
|
|
.ft L
|
|
enabled control rw speed full maxpkt 64 pollival 0
|
|
samplesz 0 hz 0 hub 1 port 3 busy
|
|
storage csp 0x500608 vid 0x951 did 0x1613 Kingston 'DT 101 II'
|
|
.ft
|
|
.EE
|
|
.LP
|
|
The first line contains status information.
|
|
The rest is information supplied by
|
|
.I usbd
|
|
as an aid to locate devices.
|
|
The status information includes:
|
|
.TF "\fREndpoint mode
|
|
.PD
|
|
.TP
|
|
Device state
|
|
One of
|
|
.BR config ,
|
|
.BR enabled ,
|
|
and
|
|
.BR detached .
|
|
An endpoint starts in the
|
|
.B config
|
|
state, and accepts control commands written to its
|
|
.B ctl
|
|
file to configure the endpoint.
|
|
When configured, the
|
|
state is
|
|
.B enabled
|
|
and the
|
|
.B data
|
|
file is used as described above (several control requests can still
|
|
be issued to its
|
|
.B ctl
|
|
file, but most will not be accepted from now on).
|
|
Upon severe errors, perhaps a physical
|
|
detachment from the bus, the endpoint enters the
|
|
.B detached
|
|
state and no further I/O is accepted on it.
|
|
Files for an endpoint (including its directory)
|
|
vanish when the device is detached and its files are no longer open.
|
|
Root hubs may not be detached.
|
|
.TP
|
|
Endpoint type
|
|
.BR control ,
|
|
.BR iso ,
|
|
.BR interrupt ,
|
|
or
|
|
.BR bulk ,
|
|
indicating the type of transfer supported by the endpoint.
|
|
.TP
|
|
Endpoint mode
|
|
One of
|
|
.BR r ,
|
|
.BR w ,
|
|
or
|
|
.BR rw ,
|
|
depending on the direction of the endpoint (in, out, or inout).
|
|
.TP
|
|
Speed
|
|
.BR low
|
|
(1.5 Mb/s),
|
|
.BR full
|
|
(12 Mb/s),
|
|
.BR high
|
|
(480 Mb/s)
|
|
or
|
|
.BR super
|
|
(5 Gb/s).
|
|
.TP
|
|
Maximum packet size
|
|
Used when performing I/O on the data file.
|
|
.TP
|
|
Polling interval
|
|
The polling period expressed as a number of µframes
|
|
(for high-speed endpoints) or frames (for low- and full-speed endpoints).
|
|
Note that a µframe takes 125 µs while a frame takes 1 ms.
|
|
This is only of relevance for interrupt and isochronous endpoints.
|
|
This value determines how often I/O happens.
|
|
Note that the control request adjusting the polling interval does
|
|
.I not
|
|
use these units, to make things easier for USB device drivers.
|
|
.TP
|
|
Sample size
|
|
Number of bytes per I/O sample (isochronous endpoints only).
|
|
.TP
|
|
Frequency
|
|
Number of samples per second (Hertz).
|
|
.TP
|
|
Hub address
|
|
Device address of the hub where the device is attached.
|
|
.TP
|
|
Port number
|
|
Port number (in the hub) where the device is attached.
|
|
.TP
|
|
Usage
|
|
.L busy
|
|
while the data file is open and
|
|
.L idle
|
|
otherwise.
|
|
This is useful to avoid disturbing endpoints already run
|
|
by a device driver.
|
|
.LP
|
|
The second line contains information describing the device:
|
|
.TF "\fRDevice strings
|
|
.PD
|
|
.TP
|
|
Class name
|
|
As provided by the device itself.
|
|
.TP
|
|
CSP
|
|
Class, Subclass, and Protocol for the device.
|
|
If the device contains different functions and has more CSPs,
|
|
all of them will be listed.
|
|
The first one is that of the device itself.
|
|
For example,
|
|
a mouse and keyboard combo may identify itself as a keyboard but
|
|
then include two CSPs, one for the keyboard and another one for the mouse.
|
|
.TP
|
|
Vid and Did
|
|
Vendor and device identifiers.
|
|
.TP
|
|
Device strings
|
|
Provided by the device and identifying the manufacturer and type of device.
|
|
.LP
|
|
For example, to find a mouse not yet in use by a driver, scan the
|
|
.B ctl
|
|
files for
|
|
.BR enabled ,
|
|
.BR idle ,
|
|
and
|
|
.BR "csp 0x020103" .
|
|
A mouse belongs to class 3 (in the least significant byte),
|
|
.IR "human interface device" ,
|
|
subclass 1,
|
|
.IR boot ,
|
|
protocol 2,
|
|
.I mouse
|
|
(protocol 1 would be the keyboard).
|
|
USB class, subclass and proto codes can be found at
|
|
.BR http://www.usb.org .
|
|
.SS Control requests
|
|
Endpoint control files accept the following requests.
|
|
In most cases
|
|
the driver does not issue them, leaving the task to either
|
|
.I usbd
|
|
or the usb driver library documented in
|
|
.IR nusb (2).
|
|
.TF "\fLsamplehz\fI n
|
|
.TP
|
|
.B detach
|
|
Prevent further I/O on the device (delete the endpoint)
|
|
and remove its file interface as soon as no process is using their files.
|
|
.TP
|
|
.BI maxpkt " n"
|
|
Set the maximum packet size to
|
|
.I n
|
|
bytes.
|
|
.TP
|
|
.BI pollival " n"
|
|
Only for interrupt and isochronous endpoints.
|
|
Set the polling interval as a function of the value
|
|
.I n
|
|
given by the endpoint descriptor.
|
|
The interval value used is the period
|
|
.I n
|
|
in bus time units for low- and full-speed interrupt endpoints.
|
|
Otherwise, the actual interval is
|
|
$2 sup n$
|
|
and not
|
|
.IR n .
|
|
Bus time units are 1 ms for low- and full-speed endpoints and 125 µs for
|
|
high-speed endpoints.
|
|
In most cases, the device driver may ignore
|
|
all this and issue the control request supplying the
|
|
polling interval value as found
|
|
in the endpoint descriptor.
|
|
The kernel adjusts the value according
|
|
to the endpoint configuration and converts it into the number of
|
|
frames or µframes between two consecutive polls.
|
|
.TP
|
|
.BI samplesz " n"
|
|
Use
|
|
.I n
|
|
as the number of bytes per sample.
|
|
.TP
|
|
.BI hz " n"
|
|
Use
|
|
.I n
|
|
as the number of samples per second.
|
|
.TP
|
|
.BI ntds " n"
|
|
Use
|
|
.I n
|
|
as the number of transactions per frame (or µframe), as reported
|
|
by the descriptor.
|
|
.TP
|
|
.BI uframes " n"
|
|
If
|
|
.I n
|
|
is set to 1 for an isochronous endpoint,
|
|
.IR read (2)
|
|
from the data file will not cross μframe boundaries.
|
|
.TP
|
|
.B clrhalt
|
|
Clear the halt condition for an endpoint.
|
|
Used to recover from a stall caused by a device to signal its driver
|
|
(usually due to an unknown request or a failure to complete one).
|
|
.TP
|
|
.BI info " string"
|
|
Replaces description information in
|
|
.B ctl
|
|
with
|
|
.IR string .
|
|
.I Usbd
|
|
uses this to add device descriptions.
|
|
.TP
|
|
.B address
|
|
Tell this driver that the device has been given an address,
|
|
which causes the device to enter the
|
|
.I enabled
|
|
state.
|
|
.TP
|
|
.BI name " str"
|
|
Generates an additional file name,
|
|
.IR str ,
|
|
for the
|
|
.B data
|
|
file of the endpoint.
|
|
This file name appears in the root directory of the
|
|
.L #u
|
|
tree.
|
|
For example, this is used by the audio device
|
|
driver to make the
|
|
.B data
|
|
file also available as
|
|
.BR /dev/audio .
|
|
.TP
|
|
.BI debug " n"
|
|
Enable debugging of the endpoint.
|
|
.I N
|
|
is an integer;
|
|
larger values make diagnostics more verbose.
|
|
.L 0
|
|
stops debugging diagnostics.
|
|
.L 1
|
|
causes just problem reports.
|
|
Bigger values report almost everything.
|
|
.TP
|
|
.BI timeout " n"
|
|
Enable time-outs for the endpoint.
|
|
Transfers are timed out by the kernel after
|
|
.I n
|
|
ms.
|
|
This should not be used for control and isochronous endpoints,
|
|
which are always timed out.
|
|
.PD
|
|
.LP
|
|
Setup endpoints
|
|
(those represented by
|
|
.BI ep N .0
|
|
directories)
|
|
also accept the following requests:
|
|
.TP
|
|
.BI new " n type mode"
|
|
Creates a new endpoint with number
|
|
.I n
|
|
of the given
|
|
.IR type
|
|
(\c
|
|
.BR ctl ,
|
|
.BR bulk ,
|
|
.BR intr ,
|
|
or
|
|
.BR iso ).
|
|
.I Mode
|
|
may be
|
|
.BR r ,
|
|
.BR w ,
|
|
or
|
|
.BR rw ,
|
|
which creates, respectively, an input, output, or input/output endpoint.
|
|
.TP
|
|
.B "speed {low|full|high|super}
|
|
Set the endpoint speed to full, low, high, or SuperSpeed, respectively.
|
|
.TP
|
|
.B hub
|
|
Tell this driver that the endpoint corresponds to a hub device.
|
|
.PD
|
|
.PP
|
|
Setup endpoints for hub devices also accept
|
|
.TP
|
|
.B "newdev {low|full|high|super} \fIport\fP
|
|
Create a new setup endpoint to represent a new device.
|
|
The first argument is the device speed.
|
|
.I Port
|
|
is the port number where the device is attached
|
|
(the hub is implied by the endpoint where the control request is issued).
|
|
.PD
|
|
.PP
|
|
The file
|
|
.B /dev/usb/ctl
|
|
provides all the information provided by the various
|
|
.B ctl
|
|
files when read.
|
|
It accepts several requests that refer to
|
|
the entire driver and not to particular endpoints:
|
|
.TF "\fLdebug \fIn"
|
|
.TP
|
|
.B "debug \fIn\fP
|
|
Sets the global debug flag to
|
|
.IR n .
|
|
.TP
|
|
.B dump
|
|
Dumps data structures for inspection.
|
|
.SH FILES
|
|
.TF #u/usb
|
|
.TP
|
|
.B #u/usb
|
|
root of the USB interface
|
|
.SH SOURCE
|
|
.B /sys/src/9/port/usb.h
|
|
.br
|
|
.B /sys/src/9/port/devusb.c
|
|
.br
|
|
.B /sys/src/9/*/usb*.c
|
|
.SH "SEE ALSO"
|
|
.IR nusb (2),
|
|
.IR nusb (4),
|
|
.IR plan9.ini (8)
|
|
.SH BUGS
|
|
USB controllers limit the speed of all their ports
|
|
to that of the slowest device connected to any one of them.
|
|
.PP
|
|
Isochronous input streams are not implemented for OHCI.
|
|
.PP
|
|
Some EHCI controllers drop completion interrupts and so must
|
|
be polled, which hurts throughput.
|